Asus P2B-DS P2B-DS User Manual

Asus P2B-DS Manual

Asus P2B-DS manual content summary:

  • Asus P2B-DS | P2B-DS User Manual - Page 1
    ® P2B-D/P2B-DS Dual Pentium® III / II Motherboard USER'S MANUAL Special Features • P2B-DS • Adaptec 7890 SCSI Chipset • Adaptec 3860 SCSI Transceiver
  • Asus P2B-DS | P2B-DS User Manual - Page 2
    by the digit before and after the period of the manual revision number. Manual updates are represented by the third digit in the manual revision number. For previous or updated manuals, BIOS, drivers, or product release information, contact ASUS at http://www.asus.com.tw or through any of the means
  • Asus P2B-DS | P2B-DS User Manual - Page 3
    Germany Fax: +49-2102-4420-66 Email: [email protected] Technical Support Hotline: MB/Other: +49-2102-9599-0 Notebook: +49-2102-9599-10 Fax: +49-2102-9599-11 Online Support: www.asuscom.de/de/support WWW: www.asuscom.de FTP: ftp.asuscom.de/pub/ASUSCOM ASUS P2B-D/P2B-DS User's Manual 3
  • Asus P2B-DS | P2B-DS User Manual - Page 4
    P2B-DS Motherboard Layout 10 Installation Steps 12 1. Motherboard Settings 12 Jumper Settings 13 2. System Memory (DIMM 17 DIMM Memory Installation Procedures 18 3. Central Processing Unit (CPU 19 Pentium III / II Processor 19 ASUS Smart Thermal Solutions 22 Recommended Heatsinks for Slot
  • Asus P2B-DS | P2B-DS User Manual - Page 5
    62 VII. ADAPTEC SCSI SELECT 65 Configuring the SCSI Adapter 65 VIII. ADAPTEC EZ-SCSI 67 Quick Start Instructions 67 Troubleshooting Tips 68 Information for DOS/Windows 3.1x Users 71 IX. ASUS LAN Card 75 ASUS PCI-L101 Fast Ethernet Card 75 Features 76 ASUS P2B-D/P2B-DS User's Manual 5
  • Asus P2B-DS | P2B-DS User Manual - Page 6
    radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that rique de la classe B est conforme à la norme NMB-003 du Canada. 6 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 7
    Setting up the BIOS V. Software Setup ASUS Smart Motherboard Support CD VI. Desktop Management BIOS supported Desktop Management Interface VII. Adaptec SCSI Select Adaptec SCSI Select utility (optional) VIII. Adaptec EZ-SCSI Adaptec EZ-SCSI utility (optional) IX. ASUS LAN Card PCI-L101 Fast
  • Asus P2B-DS | P2B-DS User Manual - Page 8
    FEATURES Features The ASUS P2B-D/P2B-DS motherboards are carefully designed for the demanding PC user who wants advanced features processed by the fastest CPU. • Multi-Speed: Supports Dual Intel Pentium® III (450MHz and faster) and Pentium® II (233MHz to 450MHz) processors. • Intel AGPset: Features
  • Asus P2B-DS | P2B-DS User Manual - Page 9
    II. FEA TURES Motherboard Parts II. FEATURES The ASUS P2B-D/P2B-DS Motherboard T: PS/2 Mouse B: PS/2 Keyboard T: USB Port 1 B: USB Port 2 COM 1 (Bottom) Parallel (Top) Serial (Bottom) COM 2 (Bottom) SEC CPU Slots Floppy Connector Intel 440BX AGPset 4 DIMM Sockets IDE Connectors Accelerated
  • Asus P2B-DS | P2B-DS User Manual - Page 10
    III. INSTALLATION ASUS P2B-D/P2B-DS Motherboard Layout PS/2 MOUSE (TOP PORT) KEYBOARD (BOTTOM) CPU_FAN USB USB 1(TOP PORT) USB 2 (BOTTOM) COM 1 COM 2 Slot1 for CPU 2 BUS FREQ Intel 440BX AGPset Multi-I/O Chip SB-LINK™ Connector Hardware Monitor RT2 2Mbit Flash EEPROM (Programmable BIOS) JP4
  • Asus P2B-DS | P2B-DS User Manual - Page 11
    34 SB-LINK™ Connector (6-1 pins) (O/R) 23) SMB p. 34 SMBus Connector (3 pins) (O/R) *The onboard hardware monitor uses the address 290H-297H so legacy ISA cards must not use this address, otherwise conflicts will occur. O/R: Optional/Reserved for future use. ASUS P2B-D/P2B-DS User's Manual 11
  • Asus P2B-DS | P2B-DS User Manual - Page 12
    Motherboard Settings 2. Install Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Panel Wires, and Power Supply 6. Setup the BIOS Software 1. Motherboard . III. INST ALLATION Motherboard Settings 12 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 13
    III. INST ALLATION Motherboard Settings III. INSTALLATION Jumper can supply at least 300mA on the +5VSB lead and the new ACPI BIOS support. The default is set to Disable because not all computers have the appropriate 123 Enable 1 R 1 P2B-D/DS Keyboard Power Up ASUS P2B-D/P2B-DS User's Manual 13
  • Asus P2B-DS | P2B-DS User Manual - Page 14
    Motherboard Settings III. INSTALLATION 3. CPU Bus Frequency (FS0, FS1, FS2) This option tells the clock generator what frequency to send to the CPU, DRAM, and 440BX AGPset. This allows the selection of the CPU CPU's Internal frequency (the advertised CPU P2B-D/DS CPU Bus Frequency 4. CPU P2B-D/DS CPU
  • Asus P2B-DS | P2B-DS User Manual - Page 15
    III. INST ALLATION Motherboard Settings III. INSTALLATION Set the jumpers by the Internal speed of your processor as follows: Intel CPU Model Freq. Pentium III 600MHz JP18 Disable (Default) JP18 Enable 1 R 1 P2B-D/DS Chassis Intrusion Sensor Setting ASUS P2B-D/P2B-DS User's Manual 15
  • Asus P2B-DS | P2B-DS User Manual - Page 16
    III. INSTALLATION (This page was intentionally left blank.) III. INST ALLATION 16 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 17
    density than EDO (Extended Data Output) chips. • BIOS shows SDRAM memory on bootup screen. • 8 chips/side modules do not support ECC, only 9 chips/side modules support ECC. • Single-sided DIMMs come in 16, 32, 64, 128MB; double-sided come in 32, 64, 128, 256MB. ASUS P2B-D/P2B-DS User's Manual 17
  • Asus P2B-DS | P2B-DS User Manual - Page 18
    density. 20 Pins 60 Pins 88 Pins Lock P2B-D/DS 168-Pin DIMM Memory Sockets (FRONT) The DIMMs must be 3.3Volt slot on the motherboard. You must tell your retailer the correct DIMM type before purchasing. This motherboard supports four clock signals. 18 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 19
    circulation, the processor could overheat and damage both the processor and the motherboard. You may install an auxiliary fan, if necessary. Other Important Items Intel Pentium III / II Processor in an SEC cartridge ASUS C-P2T PC100 CPU Termination Card ASUS P2B-D/P2B-DS User's Manual 19
  • Asus P2B-DS | P2B-DS User Manual - Page 20
    CPU will overheat. You may install an auxiliary fan to provide adequate circulation across the processor's passive heatsink. Push each end of the clamps until they lock The thermal pad & SEC cartridge should not have a gap! SEC Cartridge with Heatsink (Top View) 20 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 21
    with a thermal sensor built inside the CPU fan, or purchased separately the thermal sensor cables (ASUS P2T-Cable), you can connect the P2T-Cables to your motherboard's thermal sensor connectors. See the next page for information on ASUS Smart Thermal Solutions. ASUS P2B-D/P2B-DS User's Manual 21
  • Asus P2B-DS | P2B-DS User Manual - Page 22
    provides two smart solutions to Slot 1 CPU thermal problems: the ASUS Smart Fan or ASUS S-P2FAN and the ASUS P2T-Cable. ASUS S-P2FAN Thermal Sensor The optional ASUS Smart Fan or Cable CPU Fan Cable Rock Arm ASUS S-P2FAN is a CPU fan for a Pentium® II processor packaged in an SECC. Unlike
  • Asus P2B-DS | P2B-DS User Manual - Page 23
    a power supply with thermal monitoring. Recommended Heatsinks for Slot 1 Processors The recommended heatsinks for the Slot 1 processors are those with three-pin fans, such as the ASUS Smart Fan, that can be connected to the motherboard's CPU fan connector. These heatsinks, such as the Elan Vital
  • Asus P2B-DS | P2B-DS User Manual - Page 24
    , there are two types of ISA cards. The original ISA expansion card design, now referred to as legacy ISA cards, requires that you configure the card's jumpers manually and then install it in an available slot on the ISA bus. To see a map of your used and free IRQs in Windows 98, the Control Panel
  • Asus P2B-DS | P2B-DS User Manual - Page 25
    Graphics Port This motherboard provides an accelerated graphics port (AGP) slot to support a new generation of graphics cards with ultra-high memory bandwidth, such as the ASUS AGP-V2740 3D Multimedia Accelerator. 1 R 1 P2B-D/DS Accelerated Graphics Port (AGP) ASUS P2B-D/P2B-DS User's Manual 25
  • Asus P2B-DS | P2B-DS User Manual - Page 26
    . Placing jumper caps over these will cause damage to your motherboard. IMPORTANT: Ribbon cables should always be connected with the red cards can use IRQ12. See "PS/2 Mouse Function Control" in BIOS Features Setup of the BIOS SOFTWARE. PS/2 Mouse (6-pin Female) 26 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 27
    Onboard Parallel Port" in Chipset Features Setup of the BIOS SOFTWARE. NOTE: Serial printers must be connected to Disk Drive Connector (34-1pin FLOPPY) This connector supports the provided floppy disk drive ribbon cable. After P2B-D/DS Floppy Disk Drive Connector ASUS P2B-D/P2B-DS User's Manual 27
  • Asus P2B-DS | P2B-DS User Manual - Page 28
    one operating system on an IDE drive and another on a SCSI drive and select the boot disk through BIOS Features Setup. NOTE: Orient the red stripe on the IDE ribbon cable to Pin 1 Primary IDE Connector PIN 1 P2B-D/DS IDE Connectors Secondary IDE Connector 28 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 29
    +12V Ground CPU Fan Power Power Supply Fan Power Chassis Fan Power 1 R 1 P2B-D/DS 12Volt Cooling Fan Power NOTE: If you are installing two processors, you may connect the fan from the second heatsink to either the power supply or chassis fan connector. ASUS P2B-D/P2B-DS User's Manual 29
  • Asus P2B-DS | P2B-DS User Manual - Page 30
    ribbon cable from the module to the motherboard according to the pin definitions. +5V (NC) IRRX GND IRTX P2B-D/DS Infrared Module Connector Front View Back View IRTX support the load. For Wake on LAN support, your ATX power supply must supply at least 720mAmp. 30 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 31
    . This occurs when the side panel is opened or drive bay doors are opened. This function is available only with the optional hardware monitor installed. 1 R 1 1 R 1 P2B-D/DS Chassis Open Alarm Lead +5VSB Chassis Signal (High Active) Ground ASUS P2B-D/P2B-DS User's Manual 31
  • Asus P2B-DS | P2B-DS User Manual - Page 32
    driver support. 15. System Management Interrupt Switch Lead (SMI) This allows the user to manually cause any problems. This may require one Management Setup of the BIOS SOFTWARE section to the P2B-D/DS System Panel Connections * Requires an ATX power supply. 32 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 33
    Wide SCSI Connector Single-Ended Devices CD-ROM Scanner Tape Ultra2 Devices Disk 1 Disk 2 Disk 3 P2B-D/DS Mixed Ultra2 and Single-Ended Device Configuration Ultra2 SCSI uses the same connectors and cables as UltraSCSI, so upgrading is easy and cost-effective. ASUS P2B-D/P2B-DS User's Manual 33
  • Asus P2B-DS | P2B-DS User Manual - Page 34
    SB-Link acts as a bridge between the motherboard and the PCI audio card by providing the DMA and IRQ signals present in the ISA bus but not available on the PCI bus. by initiating data transfer. SMB 1 R 1 P2B-D/DS SMBus Connector III. INST ALLATION Connectors 34 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 35
    a. Your monitor b. External SCSI devices (starting with the last BIOS setup. Follow the instructions in the next section, BIOS Windows shuts down. NOTE: The message "You can now safely turn off your computer" will not appear when shutting down with ATX power supplies. ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 36
    IV. BIOS SOFTWARE Flash Memory Writer Utility This motherboard has an onboard SCSI BIOS and boot virus protection and therefore, requires a 2Mbit flash ROM. AFLASH.EXE: This is the Flash Memory Writer utility that updates the BIOS by uploading a new BIOS file to the 2Mbit programmable flash ROM chip
  • Asus P2B-DS | P2B-DS User Manual - Page 37
    BIOS update, press Y to start the update. The utility starts to program the new BIOS information into the flash ROM. When the programming is finished, Flashed Successfully will be displayed. Follow the onscreen instructions to continue. IV. BIOS Flash Memory Writer ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 38
    the new BIOS file, exit the Flash Memory Writer utility and then reboot. 7. Hold down to enter BIOS setup. You must select "Setup Default" to effect the new BIOS, after which you may set the other items from the Main Menu. IV. BIOS Updating BIOS 38 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 39
    BIOS SOFTWARE 6. BIOS Setup The motherboard supports two programmable Flash ROM chips: 5-Volt and 12Volt. Either of these memory chips can be updated when BIOS upgrades are released. Use the Flash Memory Writer utility to download the new BIOS IV. BIOS BIOS Setup ASUS P2B-D/P2B-DS User's Manual 39
  • Asus P2B-DS | P2B-DS User Manual - Page 40
    BIOS Defaults" option loads the minimum settings for troubleshooting. the system clock and error handling. If the motherboard is already installed in a working system, to provide you with the information you need. The memory display at the lower right-hand side of the ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 41
    Block Addressing (LBA) to allow larger IDE hard disks; set it to Large for drives over 528MB that do not support LBA. Large type of drive can only be used with MS-DOS and is very uncommon. Most IDE drives over 528MB support the LBA mode. IV. BIOS Standard CMOS ASUS P2B-D/P2B-DS User's Manual 41
  • Asus P2B-DS | P2B-DS User Manual - Page 42
    do not support this feature, card, choose EGA/VGA. Halt On (All Errors) This field determines which types of errors will cause the system to halt. Choose from All Errors; No Errors; All,But Keyboard, All,But Diskette; and All,But Disk/Key. IV. BIOS Standard CMOS 42 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 43
    Some entries are required by the motherboard's design to remain in their default settings. IV. BIOS BIOS Features A section at the lower right to each function heading. Details of BIOS Features Setup CPU Internal Core Speed (Manual) This function is reserved for ASUS P2B-D/P2B-DS User's Manual 43
  • Asus P2B-DS | P2B-DS User Manual - Page 44
    CPU level 2 cache. BIOS Update (Enabled) This functions as an update loader integrated into the BIOS to supply the processor with the required data. The BIOS will load the update on all processors feature may decrease system performance. IV. BIOS BIOS Features 44 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 45
    is Setup, where the system goes through its startup routine unless the Setup utility is called, when the system prompts for the Supervisor Password. IV. BIOS BIOS Features ASUS P2B-D/P2B-DS User's Manual 45
  • Asus P2B-DS | P2B-DS User Manual - Page 46
    . IV. BIOS Chipset Features the module, such as memory type, size, speed, CPU read cycles. Leave on default setting. Snoop Ahead (Enabled) Enabled will allow PCI streaming. Leave on default setting. Host Bus Fast Data Ready (Disabled) Leave on default setting. 46 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 47
    write combining) is a new cache technology for the video memory of the processor. It can greatly improve the display speed by caching the display data. You must leave this on the default setting of UC (uncacheable) if your display card cannot support this feature, otherwise your system may not boot
  • Asus P2B-DS | P2B-DS User Manual - Page 48
    install an I/O card with a parallel port, ensure that there is no conflict in the address assignments. The PC can support up to three the second serial UART to support the infrared module connector on the motherboard. If your system already BIOS Chipset Features 48 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 49
    " will appear in the "Control Panel." Choose "Advanced" in the Power Management Field. Video Off Option (Suspend -> Off ) This field determines when to activate the video off feature for monitor power management. The settings are Always On and Suspend -> Off. ASUS P2B-D/P2B-DS User's Manual 49
  • Asus P2B-DS | P2B-DS User Manual - Page 50
    4 seconds. Suspend allows the button to have a dual function where pressing less than 4 seconds will place the system in sleep mode. Regardless of the setting, holding the ATX switch for more than 4 seconds will power off the system. IV. BIOS Power Management 50 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 51
    BIOS setup screen. Set to Ignore if one of these are not used so that error messages will not be given...Thermal Monitor (xxxC/xxxF) The onboard hardware monitor is able to detect the CPU and MB (motherboard , DEL to enter SETUP". IV. BIOS Power Management ASUS P2B-D/P2B-DS User's Manual 51
  • Asus P2B-DS | P2B-DS User Manual - Page 52
    card is using that IRQ. If you install a legacy ISA card that requires a unique IRQ, and you are not using an ICU, you must set the field for that IRQ to Yes. For example: If you install a legacy ISA card that requires IRQ 10, then set IRQ10 Used By ISA to Yes... 52 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 53
    allows the onboard SCSI chipset to support a maximum of cards. VGA BIOS Sequence (PCI/AGP) You can select the search order for your VGA card(s). PCI/AGP will detect PCI VGA cards before AGP, and AGP/PCI will detect AGP cards before PCI VGA. IV. BIOS Plug & Play / PCI ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 54
    troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high performance features. To load these default settings, highlight "Load BIOS on the Standard CMOS Setup screen. IV. BIOS Load Defaults 54 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 55
    screen automatically reverts to the main screen. IV. BIOS Passwords To implement password protection, specify in the "Security Option" field of the BIOS Features Setup screen when the system will prompt for ) in section III for procedures on clearing the CMOS. ASUS P2B-D/P2B-DS User's Manual 55
  • Asus P2B-DS | P2B-DS User Manual - Page 56
    Standard CMOS Setup screen. IV. BIOS Hard Disk Detect Up to four the drive letter on the screen. The process then proceeds to the next drive letter. auto-detecting a hard disk that supports the LBA mode, three lines will problem if the drive is new and empty. 56 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 57
    . BIOS Save & Exit Exit Without Saving Select this option to exit the Setup utility without saving the modifications you specify during the current session. To exit without saving, highlight the "Exit Without Saving" option on the main screen and then press . ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 58
    Info displays information on your motherboard, BIOS, and CPU. Browse This CD allows you to see the contents of the ASUS Support CD. User's Manual displays the motherboard user's manual in pdf format. Technical Support Form opens up a blank Technical Support Request Form for you to fill and
  • Asus P2B-DS | P2B-DS User Manual - Page 59
    file. Driver installs the necessary components to work properly. NOTE: This is not available if your motherboard does not have onboard VGA, audio, and SCSI. Other allows you to install Adobe Acrobat Reader and/or Trend PC Cillin, a virus protection software. ASUS P2B-D/P2B-DS User's Manual 59
  • Asus P2B-DS | P2B-DS User Manual - Page 60
    is located in the DMI folder under the root directory of the support CD Flash BIOS Utility (DOS Version) provides information on the Flash BIOS utility (AFLASH.EXE). Choose "Restart in MS-DOS mode" and then type "aflash" from the AFLASH folder on the support CD. 60 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 61
    V. SOFTWARE SETUP Click here to bring up ASUS Contact Information. ASUS Contact Information V. S/W SETUP Contact Info Submenu ASUS P2B-D/P2B-DS User's Manual 61
  • Asus P2B-DS | P2B-DS User Manual - Page 62
    the motherboard BIOS and has to be manually entered through the DMI Configuration Utility and updated into the MIFD. This DMI Configuration Utility provides the same reliability as PnP updating and will prevent the refreshing failures associated with updating the entire BIOS. Starting the ASUS DMI
  • Asus P2B-DS | P2B-DS User Manual - Page 63
    the BIOS Characteristics field BIOS Auto Detect *** appears on the right for each menu item on the left side that has been auto detected by the system BIOS. A heading, *** User Modified *** will appear on the right for menu items that have been modified by the user. ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 64
    to memory by entering a drive and path and file name here. Load BIOS Defaults You can load the BIOS defaults from a MIFD file and can clear all user modified and added data. You must reboot your computer in order for the defaults to be saved back into the Flash BIOS. 64 ASUS P2B-D/P2B-DS User
  • Asus P2B-DS | P2B-DS User Manual - Page 65
    the option of reassigning bad blocks so that data will not be written to them. This utility is only necessary if you suspect that your SCSI disk drive has a problem. ASUS P2B-D/P2B-DS User's Manual 65
  • Asus P2B-DS | P2B-DS User Manual - Page 66
    VII. ADAPTEC SCSI SELECT (This page was intentionally left blank.) VII. SCSI SELECT 66 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 67
    Windows®3.1x, or Windows for Workgroups3.1x. Note: TheADAPTEC EZ-SCSI UTILITY does not provide drivers for Windows®95 and WindowsNT™. Quick Start Instructions First, install SCSI devices floppy is A: drive). Then press . 4 Follow the onscreen instructions. ASUS P2B-D/P2B-DS User's Manual 67
  • Asus P2B-DS | P2B-DS User Manual - Page 68
    Hardware Wizard. If Windows does not detect the host adapter, run the Add New Hardware Wizard again. This time, select No on the second screen of the wizard, then select SCSI controllers on the next screen. Select the name of your host adapter when it appears. 68 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 69
    according to the instructions in the hardware documentation. 5 Turn the computer ON. If the new host adapter supports Plug and Play, Windows will install and configure it automatically. Otherwise, run Add New Hardware to make sure the new driver is loaded. ASUS P2B-D/P2B-DS User's Manual 69
  • Asus P2B-DS | P2B-DS User Manual - Page 70
    Troubleshooting VIII. ADAPTEC EZ-SCSI If I am running under Windows95, do I need lines for the Adaptec real mode ASPI drivers and mscdex in my CONFIG.SYS and AUTOEXEC.BAT files? Usually, you do not need to use these real mode ASPI drivers, because the new Windows miniport drivers support most SCSI
  • Asus P2B-DS | P2B-DS User Manual - Page 71
    system with the correct ASPI manager. To learn more about these ASPI managers, including their command line option information, see the Adaptec EZSCSI Online Reference, a Windows Help application. ASUS P2B-D/P2B-DS User's Manual 71
  • Asus P2B-DS | P2B-DS User Manual - Page 72
    the DOS prompt, not from the Windows MSDOS prompt. Before you run it, formatting a SCSI disk device that supports more than one LUN (for example, Iomega's Bernoulli dual multidrive) Esc at any time to stop the verification process. (This does not damage the disk.) If ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 73
    BIOS, use the DOS fdisk utility to partition and format the disk device. (See the MSDOS documentation.) Run afdisk from the DOS prompt only, not from the Windows usually c:\scsi), type afdisk at the DOS prompt, and press Enter. Information about your SCSI disk ASUS P2B-D/P2B-DS User's Manual 73
  • Asus P2B-DS | P2B-DS User Manual - Page 74
    to 2Gigabytes are supported. 5. When the SCSI Device to Partition window. If you want to partition a different disk device, select the device from the list and repeat the earlier steps. 7. To quit afdisk, press Esc and select Yes to confirm that you want to quit. 74 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 75
    the Wake on LAN (WOL) output signal to the motherboard's WOL_CON in order to utilize the wake on LAN feature of the motherboard. Connect the LAN activity output signal (LAN_LED) to the system cabinet' front panel LAN_LED in order to display the LAN data activity. ASUS P2B-D/P2B-DS User's Manual 75
  • Asus P2B-DS | P2B-DS User Manual - Page 76
    ? A: To enable Wake-On-LAN function, your system requires Ethernet LAN adapter card that can activate Wake-On-LAN function, a client with Wake-On-LAN capability, and software such as LDCM Rev. 3.10 or up that can trigger wake-up frame. IX. ASUS LAN Card Features 76 ASUS P2B-D/P2B-DS User's Manual
  • Asus P2B-DS | P2B-DS User Manual - Page 77
    OTHER ASUS PRODUCTS ® Barebone Servers Pentium® III PC100 ECC Ultra2 SCSI 5.25" Pentium® II Max. Memory Onboard Fixed Storage Support (GB) (Channels) Devices AP100 1 1 1 3 AP200 2 1 1 3 AP2000 2 1 1 4 AP2500 2 1 1 4 AP3000 2 Xeon™ 2 2 4 AP6000 2 1 1 4 AP7500 2 1
  • Asus P2B-DS | P2B-DS User Manual - Page 78
    ASUS PCI-DA2100/2200 Series SCSI RAID Card • PCI-DA2100 series support 4x86 DX4-100 processor • PCI-DA2200 series support 5x86-133 processor • One 72-pin SIMM socket supports up to 128MB cache memory • RAID levels 0, 0+1, 3, 5, non-RAID • PCI-DA2100A supports Ultra Wide SCSI interface and dual
  • Asus P2B-DS | P2B-DS User Manual - Page 79
    OTHER ASUS PRODUCTS ® Goes Mobile! M8300/8200 Series Thin & Light Convertible Notebook PC 13.3" or 12.1" TFT Color Display 233/266/300/333/366/400+MHz F7400
  • Asus P2B-DS | P2B-DS User Manual - Page 80
    Audio CD, CD-ROM (mode 1 & mode 2), Mixed mode, CD-ROM/XA (mode 2, form 1 & form 2), Video CD, CD-I, Photo CD (single & multi-session), Karaoke CD, CD Extra, I-Trax, CD-R, CD-RW 8 cm and 12 cm DOS 6.xx, Windows 3.x/95/98, OS/2 Warp, Netware, SCO UNIX 128KB CD-S500 7500 KBps maximum CD-S450
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

®
P2B-D/P2B-DS
Dual Pentium
®
III / II Motherboard
USER’S MANUAL
Special Features
P2B-DS
Adaptec 7890 SCSI Chipset
Adaptec 3860 SCSI Transceiver