Asus P5G41-M LX2 User Manual - Page 24
P5G41-M LX Speaker Out Connector
View all Asus P5G41-M LX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
PLED+ PLEDPWR GND HD_LED+ HD_LED- Ground Reset 7. System panel connector (10-1 pin F_PANEL) This connector supports several chassis-mounted functions. PLED PWR BTN F_PANEL PIN 1 P5G41-M LX +HDLED RESET P5G41-M LX System panel connector • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin +HDLED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The HD LED lights up or flashes when data is read from or written to the HDD. • ATX power button/soft-off button (2-pin PWRBTN) This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. 8. Speaker connector (4-pin SPEAKER) This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. SPEAKER P5G41-M LX PIN 1 P5G41-M LX Speaker Out Connector +5V GND GND Speaker Out ASUS P5G41-M LX 1-15