Asus P5K SE EPU User Manual - Page 87
OnBoard Devices Configuration
View all Asus P5K SE EPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Memory Remap Feature [Enabled] Allows you to enabled or disable the remapping of the overlapped PCI memory above the total physical memory. Enable this option only when you install 64-bit operating system. Configuration options: [Disabled] [Enabled] Initiate Graphic Adapter [PEG/PCI] Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [PCI/PEG] [PEG/PCI] PEG Port Control [Auto] Configuration options: [Auto] [Disabled] PEG Force x1 [Disabled] This item appears when the PEG Port Control item is set to [Auto]. Configuration options: [Enabled] [Disabled] 4.4.6 OnBoard Devices Configuration Advanced BIOS SETUP UTILITY Onboard Device Configuraiton High Definition Audio Front Panel Type Marvell IDE Controller Onboard PCIE GbE LAN LAN Option ROM Serial Port1 Address [Enabled] [HD Audio] [Enabled] [Enabled] [Disabled] [3F8/IRQ4] Enable or Disable High Definition Audio Controller Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. High Definition Audio [Enabled] Allows you to enable or disable the High Definition Audio. The following item appears only when you enable this item. Configuration options: [Enabled] [Disabled] Front Panel Type [HD Audio] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. Configuration options: [AC97] [HD Audio] Marvell IDE Controller [Enabled] Allows you to disable or enable the onboard Marvell® IDE controller. Configuration options: [Enabled] [Disabled] ASUS P5K SE/EPU 4-23