Asus P5Q SE User Manual

Asus P5Q SE - Motherboard - ATX Manual

Get Asus P5Q SE - Motherboard - ATX PDF manuals and user guides
UPC - 610839165292
View all Asus P5Q SE manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P5Q SE manual content summary:

  • Asus P5Q SE | User Manual - Page 1
    P5Q SE Motherboard
  • Asus P5Q SE | User Manual - Page 2
    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY
  • Asus P5Q SE | User Manual - Page 3
    viii About this guide ix P5Q SE specifications summary xi Chapter 1: Product introduction 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features 1-2 1.3.1 Product highlights 1-2 1.3.2 ASUS unique features 1-3 1.3.3 ASUS Stylish features 1-5 1.3.4 ASUS Intelligent Overclocking features
  • Asus P5Q SE | User Manual - Page 4
    3-2 Chapter 4: BIOS setup 4.1 Managing and updating your BIOS 4-1 4.1.1 ASUS Update utility 4-1 4.1.2 Creating a bootable floppy disk 4-4 4.1.3 ASUS EZ Flash 2 utility 4-5 4.1.4 AFUDOS utility 4-6 4.1.5 ASUS CrashFree BIOS 3 utility 4-8 4.2 BIOS setup program 4-9 4.2.1 BIOS menu screen 4-10
  • Asus P5Q SE | User Manual - Page 5
    4.5.1 Trusted Computing 4-22 4.5.2 CPU Configuration 4-23 4.5.3 Chipset 4-25 4.5.4 OnBoard Devices Configuration 4-26 4.5.5 USB Configuration 4-27 4.5.6 PCI PnP 4-28 4.6 Power menu 4-29 4.6.1 Suspend Mode 4-29 4.6.2 ACPI 2.0 Support 4-29 4.6.3 ACPI APIC Support 4-29 4.6.4 APM Configuration
  • Asus P5Q SE | User Manual - Page 6
    4-39 4.9 Exit menu 4-40 Chapter 5: Software support 5.1 Installing an operating system 5-1 5.2 Support DVD information 5-1 5.2.1 Running the support DVD 5-1 5.2.2 Drivers menu 5-2 5.2.3 Utilities menu 5-3 5.2.4 Manual menu 5-5 5.2.5 ASUS Contact information 5-5 5.2.6 Other information
  • Asus P5Q SE | User Manual - Page 7
    . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Asus P5Q SE | User Manual - Page 8
    qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals stable surface. • If you encounter technical problems with the product, contact a qualified service technician or your retailer. This symbol of
  • Asus P5Q SE | User Manual - Page 9
    describes the CPU features and technologies that the motherboard supports. Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software
  • Asus P5Q SE | User Manual - Page 10
    manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions the key names are linked with a plus sign (+). Example: ++
  • Asus P5Q SE | User Manual - Page 11
    P5Q SE specifications summary CPU Chipset System Bus Memory Expansion Slots Storage ASUS Unique Features Other Features LGA775 socket for Intel® Core™2 Extreme / Core™2 Quad / Core™2 Duo / Pentium® dual-core / Celeron® dual-core / Celeron® processors Compatible with Intel® 05B/05A/06 processors
  • Asus P5Q SE | User Manual - Page 12
    P5Q SE specifications summary ASUS Exclusive Overclocking Features LAN Audio USB Back Panel I/O Ports Internal I/O Connectors Intelligent overclocking tools: - ASUS AI Booster utility Precision Tweaker: - vCore: Adjustable CPU voltage at 0.00625V increment - vDIMM: 5-step DRAM voltage
  • Asus P5Q SE | User Manual - Page 13
    P5Q SE specifications summary BIOS Features Manageability Accessories Support DVD Form factor 8Mb Flash ROM, AMI BIOS, PnP, DMI 2.0, WfM 2.0, SM BIOS 2.3, ACPI 2.0a, ASUS EZ Flash 2, ASUS CrashFree BIOS 3 WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE 1 x UltraDMA 133 / 100 / 66 cable 1 x Floppy
  • Asus P5Q SE | User Manual - Page 14
    xiv
  • Asus P5Q SE | User Manual - Page 15
    This chapter describes the motherboard features and the new technologies it supports. 1Product introduction
  • Asus P5Q SE | User Manual - Page 16
    Chapter summary 1 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features 1-2 ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 17
    P5Q SE motherboard 2 x Serial ATA signal cables 1 x 2-port Serial ATA power cable 1 x Ultra DMA 133/100/66 cable 1 x Floppy disk drive cable 1 x I/O shield 2 in 1 Q-Connector ASUS motherboard support DVD User guide If any of the above items is damaged or missing, contact your retailer. ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 18
    the memory accesses. PCI Express 2.0 support The motherboard supports the latest PCI Express 2.0 devices for double speed and bandwidth which enhances system performance.See page 2-20 for details. FSB 1600 support ASUS's exclusive overclocking design now unleashes the ultimate potential of the Intel
  • Asus P5Q SE | User Manual - Page 19
    Windows at anytime! See pages 5-29 to 5-37 for details. • The actual boot time depends on the hardware configuration and the product model. • ASUS Express Gate supports file uploading from USB drives and downloading to USB drives only. ASUS Power Saving Solution ASUS 23 for details. ASUS P5Q SE 1-
  • Asus P5Q SE | User Manual - Page 20
    to install computer components, update the BIOS or back up your favorite settings. ASUS Q-Connector ASUS Q-Connector allows you to easily connect or disconnect the chassis front panel cables to the motherboard. This unique module eliminates the trouble of connecting the system panel cables one at
  • Asus P5Q SE | User Manual - Page 21
    features AI Booster The ASUS AI Booster allows you to overclock the CPU speed in Windows environment without the hassle of booting the BIOS. See page 5-22 for details. Precision Tweaker This feature allows you to fine tune the CPU/memory voltage and gradually increase the memory Front Side Bus (FSB
  • Asus P5Q SE | User Manual - Page 22
    1- Chapter 1: Product Introduction
  • Asus P5Q SE | User Manual - Page 23
    This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. 2 Hardware information
  • Asus P5Q SE | User Manual - Page 24
    Chapter summary 2 2.1 Before you proceed 2-1 2.2 Motherboard overview 2-2 2.3 Central Processing Unit (CPU 2-6 2.4 System memory 2-12 2.5 Expansion slots 2-18 2.6 Jumpers 2-21 2.7 Connectors 2-23 ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 25
    . • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from motherboard component. The illustration below shows the location of the onboard LED. P5Q SE SB_PWR ON Standby Power P5Q SE Onboard LED OFF Powered Off ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 26
    in the image below. 2.2.2 Screw holes Place six (6) screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so can damage the motherboard. Place this side towards the rear of the chassis P5Q SE 2- Chapter 2: Hardware information
  • Asus P5Q SE | User Manual - Page 27
    PCI3 CR2032 3V Lithium Cell CMOS Power 8Mb BIOS AAFP PCIEX1_2 SB_PWR SPDIF_OUT CD FLOPPY TPM USBPW1112 USB1112 Marvell 88SE6102 USBPW7-10 USB78 CLRTC USB910 CHASSIS PANEL Refer to 2.7 Connectors for more information about rear panel connectors and internal connectors. ASUS P5Q SE 2-
  • Asus P5Q SE | User Manual - Page 28
    slots PCI slots PCI Express x1 slots PCI Express 2.0 x16 slot Jumpers 1. Clear RTC RAM (3-pin CLRTC) 2. Keyboard power (3-pin PS2_USBPW56) 3. USB device wake-up (3-pin USBPW7-10, USBPW1112) Rear panel connectors 1. PS/2 mouse port (green) 2. LAN (RJ-45) port 3. Rear Speaker Out port
  • Asus P5Q SE | User Manual - Page 29
    PLED) • Hard disk drive activity LED (2-pin IDE_LED) • System warning speaker (4-pin SPEAKER) • ATX power button/soft-off button (2-pin PWRSW) • Reset button (2-pin RESET) ASUS Q-connector (system panel) Page 2-24 2-25 2-26 2-27 2-27 2-28 2-28 2-29 2-29 2-30 2-30 2-31 2-32 2-33 ASUS P5Q SE 2-
  • Asus P5Q SE | User Manual - Page 30
    stability. • Due to chipset limitation, we recommend you use FSB 800 MHz CPU or above. • Upon purchase of the motherboard, ensure that the PnP the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on
  • Asus P5Q SE | User Manual - Page 31
    2.3.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. P5Q SE P5Q SE CPU Socket 775 Before installing the CPU, ensure that the socket box is facing towards you and the load lever is on your left. 2. Press the load lever with your thumb (A), then
  • Asus P5Q SE | User Manual - Page 32
    of the socket then fit the socket alignment key into the CPU notch. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! CPU notch Gold triangle mark Alignment key 6. Apply several drops of Thermal
  • Asus P5Q SE | User Manual - Page 33
    into A the retention tab. B The motherboard supports Intel® LGA775 processors with the Intel® Enhanced Memory 64 Technology (EM64T), Enhanced Intel SpeedStep® Technology (EIST), and Hyper-Threading Technology. Refer to the Appendix for more information on these CPU features. ASUS P5Q SE 2-
  • Asus P5Q SE | User Manual - Page 34
    applied Thermal Interface Material to the CPU heatsink or CPU before you install the heatsink and fan assembly. Ensure that you have installed the motherboard to the chassis before you install the CPU fan and heatsink assembly. If you purchased a separate CPU heatsink and fan assembly, ensure that
  • Asus P5Q SE | User Manual - Page 35
    the motherboard. 2. Rotate each fastener counterclockwise. B 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard. A B A A B B A 4. Carefully remove the heatsink and fan assembly from the motherboard. ASUS P5Q SE 2-11
  • Asus P5Q SE | User Manual - Page 36
    The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are not notched differently to prevent installation on a DDR DIMM
  • Asus P5Q SE | User Manual - Page 37
    he vendor-marked value. To operate at the vendormarked or at a higher frequency, see section 4.4 Ai Tweaker menu for manual memory frequency adjustment. • The memory modules may require a better cooling system to work stably under full loading (4 DIMMs) or overclocking setting. ASUS P5Q SE 2-13
  • Asus P5Q SE | User Manual - Page 38
    P5Q SE Motherboard Qualified Vendors Lists (QVL) DDR2-667 MHz capability Size Vendor Part No. CL 512MB 1G 2G 4G 512MB 1G 1G 1G N2TU51280BE-3C639009W1CF HY5PS12821CFP-Y5 C 702AA 18D51201D-30726E 18D51200D-30646 AET93R300B 0634 MS18T51280-3 MS18T51280-3S0627D MS18T51280-3SEA07100 DIMM support
  • Asus P5Q SE | User Manual - Page 39
    / DS Chip No. N/A ASINT SS DDRII6408-6E N/A Nanya SS NT5TU64M8AE-3C N/A KINGBOX SS EPD264082200-4 DIMM support A* B* C* • • • • • • • • • DDR2-800 MHz capability Size Vendor Part No DS Heat-Sink Package DIMM support A* B* C (continued on the next page) ASUS P5Q SE 2-15
  • Asus P5Q SE | User Manual - Page 40
    the yellow slots or the black slots as one pair of Dual-channel memory configuration. • C*: Supports four modules inserted into both the yellow and black slots as two pairs of Dual-channel memory configuration. Visit the ASUS website for the latest DDR2-1066/800/667 MHz QVL. 2-16 Chapter
  • Asus P5Q SE | User Manual - Page 41
    can cause severe damage to both the motherboard and the components. 1. Unlock a DDR2 Support the DIMM lightly with your fingers when pressing the retaining 1 clips. The DIMM might get damaged when it flips out with extra force. DDR2 DIMM notch 2. Remove the DIMM from the socket. ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 42
    Remove the system unit cover (if your motherboard is already installed in a chassis). 3. BIOS setup. 2. Assign an IRQ to the card. Refer to the tables on the next page. 3. Install the software drivers for the expansion card. When using PCI cards on shared slots, ensure that the drivers support
  • Asus P5Q SE | User Manual - Page 43
    Free 15 Intel® ICH10 Family SM bus controller-3A30 * These IRQs are usually available for PCI devices. IRQ assignments for this motherboard A B shared shared - - - - PCI card 2 shared shared shared shared - - - - PCI card 3 shared shared shared shared - - - - ASUS P5Q SE 2-19
  • Asus P5Q SE | User Manual - Page 44
    other cards that comply with PCI specifications. The figure shows a LAN card installed on a PCI slot. 2.5.5 PCI Express x1 slots This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI Express specifications. The following figure shows a network
  • Asus P5Q SE | User Manual - Page 45
    reboot the system so the BIOS can automatically reset parameter settings to default values. • Due to the chipset limitation, AC power off is required prior using C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before reboot the system. ASUS P5Q SE 2-21
  • Asus P5Q SE | User Manual - Page 46
    feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. The USBPW56 jumper is for the internal USB connectors that you can connect to additional USB ports. PS2_USBPW56 12 23 +5V (Default) +5VSB P5Q SE P5Q SE Keyboard Power
  • Asus P5Q SE | User Manual - Page 47
    2.7 Connectors 2.7.1 Rear panel connectors 1 2 34 5 6 7 13 12 11 10 98 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. LAN (RJ-45) port. Supported by Gigabit LAN controller, this port the function of the audio ports in 2, 4, 6, or 8-channel configuration. ASUS P5Q SE 2-23
  • Asus P5Q SE | User Manual - Page 48
    channel Line In Front Speaker Out Mic In - Rear Speaker Out - 6-channel Line In Front Speaker Out Mic In Center/Subwoofer Rear Speaker Ou - 8-channel Line In Front Speaker Out Mic cable with a covered Pin 5. P5Q SE 2-24 FLOPPY PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to
  • Asus P5Q SE | User Manual - Page 49
    signal cable: blue, black, and gray. Connect the blue connector to the motherboard's IDE connector, then select one of the following modes to configure your device. have the same setting. P5Q SE PRI_IDE P5Q SE IDE Connector Orient the red marking on the IDE ribbon cable to PIN1. ASUS P5Q SE 2-25
  • Asus P5Q SE | User Manual - Page 50
    RSATA_TXN1 RSATA_TXP1 GND GND RSATA_RXP3 RSATA_RXN3 GND RSATA_TXN3 RSATA_TXP3 GND GND RSATA_RXP5 RSATA_RXN5 GND RSATA_TXN5 RSATA_TXP5 GND P5Q SE SATA Connectors When using the connectors in Standard IDE mode, connect the primary (boot) hard disk drive to the SATA1/2 connector. Refer to the table
  • Asus P5Q SE | User Manual - Page 51
    the module to a slot opening at the back of the system chassis. P5Q SE GND SPDIFOUT +5V SPDIF_OUT P5Q SE Digital Audio Connector The S/PDIF module is purchased separately. 5. TPM connector (20-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys
  • Asus P5Q SE | User Manual - Page 52
    + GND USB+5V USB_P7USB_P7+ GND USB+5V USB_P11USB_P11+ GND P5Q SE USB 2.0 Connectors Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and then install the Q-Connector
  • Asus P5Q SE | User Manual - Page 53
    the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! P5Q SE CHA_FAN GND +12V Rotation CPU_FAN GND CPU FAN PWR CPU FAN IN CPU FAN PWM PWR_FAN Rotation +12V GND P5Q SE Fan Connectors Only the CPU_FAN and CHA_FAN connector support the ASUS Q-FAN
  • Asus P5Q SE | User Manual - Page 54
    MICPWR Line out_R NC Line out_L PORT1L PORT1R PORT2R SEBSE_SEND PORT2L P5Q SE Front Panel Audio Connector • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • If you want to connect a high
  • Asus P5Q SE | User Manual - Page 55
    the connectors completely fit. ATX12V EATXPWR +12V DC GND +12V DC GND P5Q SE P5Q SE ATX Power Connector +3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Calculator at http://support.asus.com/PowerSupplyCalculator/PSCalculator. aspx?SLanguage=en-us for details. ASUS P5Q SE 2-31
  • Asus P5Q SE | User Manual - Page 56
    P5Q SE Ground Reset Ground PWR IDE_LEDIDE_LED+ 13. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. PANEL PLED SPEAKER +IDE_LED RESET PWRSW * Requires an ATX power supply P5Q SE System Panel mode depending on the BIOS settings. Pressing the power
  • Asus P5Q SE | User Manual - Page 57
    them to the respective front panel cable labels. 2. Install the ASUS Q-Connector to the system panel connector, ensuring the orientation matches the labels on the motherboard. Enable the front panel functions. The figure shows the Q-Connector properly installed on the motherboard. ASUS P5Q SE 2-33
  • Asus P5Q SE | User Manual - Page 58
    2-34 Chapter 2: Hardware information
  • Asus P5Q SE | User Manual - Page 59
    This chapter describes the power up Powerin3g up sequence, the vocal POST messages, and ways of shutting down the system.
  • Asus P5Q SE | User Manual - Page 60
    Chapter summary 3 3.1 Starting up for the first time 3-1 3.2 Turning off the computer 3-2 ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 61
    on the system front panel case lights up. For systems with ATX power supplies, the system LED lights up when you press the ATX power button. If your monitor complies with "green" standards or if it down the key to enter the BIOS Setup. Follow the instructions in Chapter 4. ASUS P5Q SE 3-
  • Asus P5Q SE | User Manual - Page 62
    the computer. 3. The power supply should turn off after Windows® shuts down. If you are using Windows® Vista: 1. Click the Start button then select ShutDown. 2. The mode or to soft-off mode, depending on the BIOS setting. Pressing the power switch for more than four seconds lets the system
  • Asus P5Q SE | User Manual - Page 63
    This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. 4 BIOS setup
  • Asus P5Q SE | User Manual - Page 64
    Chapter summary 4 4.1 Managing and updating your BIOS 4-1 4.2 BIOS setup program 4-9 4.3 Main menu 4-12 4.4 Ai Tweaker menu 4-16 4.5 Advanced menu 4-22 4.6 Power menu 4-29 4.7 Boot menu 4-33 4.8 Tools menu 4-37 4.9 Exit menu 4-40 ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 65
    a network or an Internet Service Provider (ISP). Installing ASUS Update To install ASUS Update: 1. Place the support DVD in the optical drive. The Drivers menu appears. 2. Click the Utilities tab, then click Install ASUS Update. 3. The ASUS Update utility is copied to your system. ASUS P5Q SE 4-
  • Asus P5Q SE | User Manual - Page 66
    update the BIOS using this utility. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS
  • Asus P5Q SE | User Manual - Page 67
    > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS from a file option from the drop‑down menu, then click Next. 3. Locate the BIOS file from the Open window, then click Open. 4. Follow the screen instructions to complete the update process. P5QSE.rom P5QSE ASUS P5Q SE 4-
  • Asus P5Q SE | User Manual - Page 68
    . b. Click from the Windows® desktop, then select Computer. c. Right-click Floppy Disk Drive then click Format to display the Format 3 1/2 Floppy dialog box. d. Select the Create an MS-DOS startup disk check box. e. Click Start. 2. Copy the original or the latest motherboard BIOS file to the
  • Asus P5Q SE | User Manual - Page 69
    BIOS update process and automatically reboots the system when done. • This function can support devices such as USB flash disk, or floppy disk with FAT 32/16 format and single partition only. • Do not shut down or reset the system while updating the BIOS to prevent system boot failure! ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 70
    utility returns to the DOS prompt after copying the current BIOS file. Updating the BIOS file To update the BIOS file using the AFUDOS utility: 1. Visit the ASUS website (www.asus.com) and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable floppy disk. 4- Chapter
  • Asus P5Q SE | User Manual - Page 71
    American Megatrends, Inc. All rights reserved. WARNING!! Do not turn off power during flash BIOS Reading file ....... done Reading flash ...... done Advance Check ...... Erasing flash ...... done Writing flash ...... done Verifying flash .... done Please restart your computer A:\> ASUS P5Q SE 4-
  • Asus P5Q SE | User Manual - Page 72
    . You can update a corrupted BIOS file using the motherboard support DVD or a USB flash disk that contains the updated BIOS file. • Prepare the motherboard support DVD or the USB flash disk containing the updated motherboard BIOS before using this utility. • For the P5Q SE motherboard, this utility
  • Asus P5Q SE | User Manual - Page 73
    under the Exit Menu. See section "4.9 Exit Menu." • The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. ASUS P5Q SE 4-
  • Asus P5Q SE | User Manual - Page 74
    menu screen Menu items Menu bar Configuration fields Main Ai Tweaker BIOS SETUP UTILITY Advanced Power Boot Tools General help Exit System Time System Date Legacy Diskette A SATA 1 SATA 2 SATA . Some of the navigation keys differ from one screen to another. 4-10 Chapter 4: BIOS setup
  • Asus P5Q SE | User Manual - Page 75
    it then press to display a list of options. Refer to "4.2.7 Pop-up window." 4.2.7 Pop-up window Select a menu item then press to display a pop-up window with the configuration options for that item. the menu screen is a brief description of the selected item. ASUS P5Q SE 4-11
  • Asus P5Q SE | User Manual - Page 76
    information on the menu screen items and how to navigate through them. Main Ai Tweaker BIOS SETUP UTILITY Advanced Power Boot Tools Exit System Time System Date Legacy Diskette A SATA 1 installed. Configuration options: [Disabled] [720K, 3.5 in.] [1.44M, 3.5 in.] 4-12 Chapter 4: BIOS setup
  • Asus P5Q SE | User Manual - Page 77
    The BIOS automatically supports multi-sector transfer feature. When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 78
    as [IDE] Sets the configuration for the Serial ATA connectors supported by the Southbridge chip. Configuration options: [IDE] [AHCI] device write protection. This will be effective only if device is accessed throuh BIOS. Confiuration option: [Disabled] [Enabled] IDE Detect Time Out (Sec) [35
  • Asus P5Q SE | User Manual - Page 79
    Select Item F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. AMI BIOS Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specification. System Memory Displays the auto-detected system memory. ASUS P5Q SE 4-15
  • Asus P5Q SE | User Manual - Page 80
    ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. 4.4.1 Ai Overclock Tuner [Auto] Allows selection of CPU overclocking options to achieve desired CPU internal frequency. Select either one of the preset overclocking configuration options: Manual Auto Allows you to individually set
  • Asus P5Q SE | User Manual - Page 81
    Frequency Synchronization Front Side Bus CPU External Frequency Manual] • The following sub-items apprear only when you set the DRAM Timing Control item to [Manual]. • The configuration options for some of the following items vary depending on the DIMMs you install on the motherboard. ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 82
    Delay(D) [Auto] Configuration options: [Auto] [1 DRAM Clocks] ~ [15 DRAM Clocks] READ To READ Delay(S) [Auto] Configuration options: [Auto] [1 DRAM Clocks] ~ [15 DRAM Clocks] 4-18 Chapter 4: BIOS setup
  • Asus P5Q SE | User Manual - Page 83
    [Auto] Allows you to enable or disable the memory overclocking charger feature. Setting this item to [Enabled] may help enhance DRAM overclock ability. Configuration options: [Auto] [Disabled] [ . Configuration options: [Auto] [Lighter] [Light] [Moderate] [Strong] [Stronger] ASUS P5Q SE 4-19
  • Asus P5Q SE | User Manual - Page 84
    [Auto] Allows you to set the front side bus termination voltage. The values range from 1.20V* to 1.50V with a 0.10V interval. The minimum value of this item becomes 1.10V when a 45nm CPU is installed. 4.4.12 Memory Voltage [Auto] Allows you to set the Memory voltage. The values range from 1.80V
  • Asus P5Q SE | User Manual - Page 85
    Set to [Disabled] to enhance FSB overclocking ability or [Auto] for EMI control. Configuration options: [Auto] [Disabled] 4.4.18 PCIE Spread Spectrum [Auto] Set to [Disabled] to enhance PCIE overclocking ability or [Auto] for EMI control. Configuration options: [Auto] [Disabled] ASUS P5Q SE 4-21
  • Asus P5Q SE | User Manual - Page 86
    Main Ai Tweaker BIOS SETUP UTILITY Advanced Power Boot Trusted Computing CPU Configuration Chipset Onboard Devices Configuration the configuration options. Trusted Computing TCG/TPM SUPPORT [No] Enable/Disable TPM TCG (TPM 1.1/1.2) supp in BIOS TCG/TPM SUPPORT [No] Allows you to enable or
  • Asus P5Q SE | User Manual - Page 87
    Virtualization enhanced by Intel® Virtualization Technology allows a platform to run multiple operating systems and applications in independent partitons. With virtualization, one computer system can function as multiple virtual systems. Configuration options: [Enabled] [Disabled] ASUS P5Q SE 4-23
  • Asus P5Q SE | User Manual - Page 88
    [Enabled] The following item appears only when you installed an Intel® Pentium® 4 or later CPU that supports the Enhanced Intel SpeedStep® Technology (EIST). Intel(R) SpeedStep(TM) Tech [Enabled] Allows you to use the Enhanced Intel® SpeedStepTM Technology. When set to [Enabled], you can adjust the
  • Asus P5Q SE | User Manual - Page 89
    ] Memory Hole [Disabled] Allows you to enable or disable the Memory Hold. Configuration options: [Disabled] [15MB-16MB] Initiate Graphic Adapter [PEG/PCI] Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [PCI/PEG] [PEG/PCI] ASUS P5Q SE 4-25
  • Asus P5Q SE | User Manual - Page 90
    4.5.4 OnBoard Devices Configuration BIOS SETUP UTILITY Advanced Onboard Device Configuraiton High Definition Audio Front Panel Type SPDIF_OUT Mode Setting or high-definition audio depending on the audio standard that the front panel audio module supports. Configuration options: [AC97] [HD Audio]
  • Asus P5Q SE | User Manual - Page 91
    None USB Functions USB 2.0 Controller USB 2.0 Controller Mode BIOS EHCI Hand-off Legacy USB Support [Enabled] [Enabled] [HiSpeed] [Enabled] [Auto] Options no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] ASUS P5Q SE 4-27
  • Asus P5Q SE | User Manual - Page 92
    system to malfunction. Plug And Play O/S [No] NO: lets the BIOS configure all the devices in the system. YES: lets the operating system configure 2008, American Megatrends, Inc. Plug And Play O/S [No] When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you
  • Asus P5Q SE | User Manual - Page 93
    you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled] [Enabled] ASUS P5Q SE 4-29
  • Asus P5Q SE | User Manual - Page 94
    4.6.4 APM Configuration BIOS SETUP UTILITY Power APM Configuration Restore on AC Power Loss [Power Off] Power On By RTC Alarm Power On By [Disabled] Allows you to enable or disable the PCIE devices to generate a wake event. Configuration options: [Disabled] [Enabled] 4-30 Chapter 4: BIOS setup
  • Asus P5Q SE | User Manual - Page 95
    feature requires an ATX power supply that motherboard, the field shows N/A. CPU Q-Fan Control [Disabled] Allows you to enable or disable the CPU Q-Fan controller. Configuration options: [Disabled] [Enabled] The CPU Fan Profile item appears when you enable the CPU Q-Fan Control feature. ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 96
    CPU Q-Fan. When set to [Standard], the CPU fan automatically adjusts depending on the CPU temperature. Set this item to [Silent] to minimize fan speed for quiet CPU -loading computing. Configuration options: [Standard] [Silent] [Turbo] Power to the motherboard, the field shows N/A. CPU Voltage, 3.
  • Asus P5Q SE | User Manual - Page 97
    Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. 4.7.1 Boot Device Priority BIOS SETUP UTILITY Boot Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device [1st FLOPPY DRIVE] [1st FLOPPY DRIVE] [Hard Drive] [ATAPI CD-ROM] [Disabled] ASUS P5Q SE 4-33
  • Asus P5Q SE | User Manual - Page 98
    Support Wait For 'F1' If Error Hit 'DEL' Message Display Interrupt 19 Capture [Enabled] [Enabled] [Force BIOS] [On] [Auto] [Enabled] [Enabled] [Disabled] Allows BIOS ASUS MyLogo 2™ feature. Add On ROM Display Mode [Force BIOS] Sets the display mode for option ROM. Configuration options: [Force BIOS
  • Asus P5Q SE | User Manual - Page 99
    forget your BIOS password, you can clear clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section "2.6 Jumpers" for information on how to erase the RTC RAM. After you have set a supervisor password, the other items appear to allow you to change other security settings. ASUS P5Q SE 4-35
  • Asus P5Q SE | User Manual - Page 100
    BIOS SETUP UTILITY Boot Security Settings Supervisor Password User Password Change password. Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting
  • Asus P5Q SE | User Manual - Page 101
    Utility V3.24 FLASH TYPE: MXIC 25L8005 Current ROM BOARD: P5Q SE VER: 0405 (H:00 B:12) DATE: 07/14/2008 Update ROM BOARD: Unknown VER: Unknown DATE: Unknown PATH: C:\ A: C: Note [Enter] Select or Load [Tab] Switch [Up/Down/Home/End] Move [B] Backup [V] Drive Info [Esc] Exit ASUS P5Q SE 4-37
  • Asus P5Q SE | User Manual - Page 102
    that the system waits at the Express Gate's first screen before starting Windows or other installed OS. Configuration options: [Prompt User] [1 Second] Express Gate. Configuration options: [No] [Reset] 4.8.3 AI NET 2 BIOS SETUP UTILITY Tools AI NET 2 Pair Status Length Atheros Check LAN
  • Asus P5Q SE | User Manual - Page 103
    /Down/Home/End] Move [B] Backup [V] Drive Info [Esc] Exit • This function can support devices such as USB flash disk or floppy disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! ASUS P5Q SE 4-39
  • Asus P5Q SE | User Manual - Page 104
    RAM. An onboard backup battery sustains the CMOS RAM so it stays on even when the PC is turned off. When you select this option, a confirmation window to fields other than System Date, System Time, and Password, the BIOS asks for a confirmation before exiting. Discard Changes This option allows you
  • Asus P5Q SE | User Manual - Page 105
    This chapter describes the contents of the support DVD that comes with the motherboard package. 5 Software support
  • Asus P5Q SE | User Manual - Page 106
    Chapter summary 5 5.1 Installing an operating system 5-1 5.2 Support DVD information 5-1 5.3 Software information 5-8 ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 107
    your computer. Click an icon to display support DVD/motherboard information Click an item to install If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the DVD. ASUS P5Q SE 5-
  • Asus P5Q SE | User Manual - Page 108
    for Anti-Virus and Drivers Utility Launches the ASUS installation wizard for anti-virus and drivers utility. Norton Internet Security 2008 Installs the Norton Internet Security 2008. Intel Chipset Driver Inf Update Program Installs the Intel chipset driver inf update program. Atheros AR8121/AR8113
  • Asus P5Q SE | User Manual - Page 109
    Installs all of the utilities through the Installation Wizard. ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in Windows® environment. This utility requires an Internet connection either through a network or an Internet Service Provider (ISP). ASUS P5Q SE 5-
  • Asus P5Q SE | User Manual - Page 110
    This smart utility monitors the fan speed, CPU temperature, and system voltages, and alerts you of any detected problems. This utility helps you keep your computer in healthy operating condition. ASUS AI Suite An innovative application to do overclocking, fan control, power saving and quiet thermal
  • Asus P5Q SE | User Manual - Page 111
    Format (PDF). Install the Adobe® Acrobat® Reader from the Support DVD before opening a user manual file. 5.2.5 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. ASUS P5Q SE 5-
  • Asus P5Q SE | User Manual - Page 112
    give additional information on the motherboard and the contents of the support DVD. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard. Browse this DVD Displays the support DVD contents in graphical format. 5- Chapter
  • Asus P5Q SE | User Manual - Page 113
    Technical support Form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support. Filelist Displays the contents of the support DVD and a brief description of each in text format. Q ASUS P5Q SE 5-
  • Asus P5Q SE | User Manual - Page 114
    to replace system boot logo before flashing BIOS, then click Next. 4. Select Update BIOS from a file from the drop down menu, then click Next. 5. When prompted, locate the new BIOS file, then click Next. The ASUS MyLogo window appears. 6. From the left window pane, select the folder that contains
  • Asus P5Q SE | User Manual - Page 115
    8. Adjust the boot image to your desired size by selecting a value on the Ratio box. 9. When the screen returns to the ASUS Update utility, flash the original BIOS to load the new boot logo. 10. After flashing the BIOS, restart the computer to display the new boot logo during POST. ASUS P5Q SE 5-
  • Asus P5Q SE | User Manual - Page 116
    installation wizard to install the Realtek® Audio Driver from the support DVD that came with the motherboard package. If the Realtek audio software is correctly HD Audio Manager Configuration options Control settings window Realtek HD Audio Manager Exit button Minimize button Information button 5-
  • Asus P5Q SE | User Manual - Page 117
    display information about the audio driver version, DirectX version, audio controller, audio codec, and language setting. Minimize Click the minimize button ( ) to minimize the window. Exit Click the exit button settings. 3. Click to effect the Sound Effect settings and exit. ASUS P5Q SE 5-11
  • Asus P5Q SE | User Manual - Page 118
    you do not want voice input. 3. Make adjustments to Wave, SW Synth, Front, Rear, Subwoofer, CD volume, Mic volume, Line Volume, and Stereo mix -down menu to select the channel configuration. 3. The control settings window displays the status of connected devices. Click for analog and digital options
  • Asus P5Q SE | User Manual - Page 119
    when recording. 3. Click the Acoustic Echo Cancellation option button to reduce the echo from the front speakers when recording. 4. Click to effect the Microphone settings and exit. 3D Audio Demo The test your settings. 4. Click to effect the 3D Audio Demo settings and exit. ASUS P5Q SE 5-13
  • Asus P5Q SE | User Manual - Page 120
    your computer: 1. Place the support DVD to the optical drive. The Drivers installation tab appears if your computer ASUS PC Probe II. 3. Follow the screen instructions to complete installation. Launching PC Probe II You can launch the PC Probe II right after installation or anytime from the Windows
  • Asus P5Q SE | User Manual - Page 121
    show. When displayed, the monitor panel for that sensor also turns red. Refer to the Monitor panels section for details. Preferences You can customize the application using the Preference section in the main window. Click the box before each preference to activate or deactivate. ASUS P5Q SE 5-15
  • Asus P5Q SE | User Manual - Page 122
    down button of the Scheme options, then select another position from the list box. Click OK when finished. Moving the monitor panels All monitor panels move together using a magnetic effect. If you want to detach a monitor panel from the group, click the horseshoe magnet icon. You can now move
  • Asus P5Q SE | User Manual - Page 123
    Windows Management Instrumentation) browser. This browser displays various Windows® management information. Click an item from the left panel to display on the right panel. Click the plus . Click the plus sign (+) before DMI Information to display the available information. ASUS P5Q SE 5-17
  • Asus P5Q SE | User Manual - Page 124
    . Click the plus sign (+) before the PCI Information item to display available information. Usage The Usage browser displays real-time information on the CPU, hard disk drive space, and memory usage. Click to display the Usage browser. CPU usage The CPU tab displays real-time CPU usage in
  • Asus P5Q SE | User Manual - Page 125
    memory. The pie chart at the bottom of the window represents the used (blue) and the available physical memory. Configuring PC Probe II Click to view and adjust the sensor threshold values. The Config window your changes Loads your saved configuration Saves your configuration ASUS P5Q SE 5-19
  • Asus P5Q SE | User Manual - Page 126
    AI Suite on your computer: 1. Place the support DVD to the optical drive. The Drivers installation tab appears if your computer has an enabled Autorun feature. 2. Click the Utilities tab, then click AI Suite. 3. Follow the screen instructions to complete installation. Launching AI Suite You can
  • Asus P5Q SE | User Manual - Page 127
    main window to open the monitor window. Displays the CPU/ system temperature, CPU/memory/PCIE voltage, and CPU/ chassis fan speed Displays the FSB/CPU frequency Click on right corner of the expanded window to switch the temperature from degrees Centigrade to degrees Fahrenheit. ASUS P5Q SE 5-21
  • Asus P5Q SE | User Manual - Page 128
    on the Windows® OS taskbar and click the AI Booster button on the AI Suite main window. The options on the taskbar allow you to use the default settings, adjust CPU/ Memory/PCI-E frequency manually, or create and apply your personal overclocking configurations. 5-22 Chapter 5: Software support
  • Asus P5Q SE | User Manual - Page 129
    AI Suite from the bundled support DVD, you can launch the utility by double-clicking the AI Suite icon on the Windows OS taskbar and click the AI Nap button on the AI Suite main window. Click Yes on the confirmation power button. Unclick the the item to switch the function back. ASUS P5Q SE 5-23
  • Asus P5Q SE | User Manual - Page 130
    . Install AI Suite from the bundled support DVD. To launch the ASUS Fan Xpert utility, double-click the AI Suite icon on the Windows® notification bar and click the Fan Xpert button on the AI Suite main window. Click to open the Calibration window Dropdown list button Click to display the dropdown
  • Asus P5Q SE | User Manual - Page 131
    1. Place the support DVD to the optical drive. The Drivers menu appears if Autorun is enabled on your computer. 2. Click ASUS EPU-4 Engine. 3. Follow the screen instructions to complete installation. Launching 4 Engine Launch 4 Engine by double-clicking the 4 Engine icon on the Windows® notification
  • Asus P5Q SE | User Manual - Page 132
    4 Engine main menu Displays CPU Power and Total CPU Energy Saving Displays the following message if no VGA power saving engine is detected. Lights up when power saving . *• Click Total to show the total CO2 that has been reduced since you launched 4 Engine. 5-26 Chapter 5: Software support
  • Asus P5Q SE | User Manual - Page 133
    off hard disk drives when they are not accessed after a certain time. • CPU Loadline: Sets up the CPU loadline to manage CPU power saving. • Light: Saves CPU power to the minimum level. • Medium: Saves CPU power to the medium level. • Heavy: Saves CPU power to the highest level. ASUS P5Q SE 5-27
  • Asus P5Q SE | User Manual - Page 134
    power. • Quiet: Lowers CPU fan speed and shuts off two chassis fans. • Slow: Lowers CPU fan and two chassis vCore Voltage Downgrade Turn Off hard disks CPU Loadline N/A Never/After 3 mins-After 3 mins-After 5 hours Light/Medium/ Heavy Keep Bios Setting/Slow Never/After 3 mins-After 5 hours Maximum
  • Asus P5Q SE | User Manual - Page 135
    . The Drivers installation tab appears if your computer has enabled Autorun feature. 2. Click the Utilities tab, then click ASUS Express Gate Installer. 3. Select the language for installation and click OK. 4. The InstallShield Wizard for Express Gate appears. Click Next to continue. ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 136
    Click Next to continue. 6. Follow the screen instructions to complete installation. The First Screen Express Gate normally (e.g. to your installed OS such as Windows), enter BIOS setup, or power off. If you don't screen), a first time wizard will guide you through basic Express Gate configurations.
  • Asus P5Q SE | User Manual - Page 137
    keys Here is a list of common-used BIOS setup Enter Boot selection pop-up In the Express Gate Environment: Key + + + + + Function Switch between softwares Bring up Power-Off dialog box Save screen snapshot as picture to file ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 138
    Using the Configuration Panel Use the configuration panel to change various Express Gate network ports on your computer. • The number of the LAN ports may differ from motherboards. • You can connect the LAN cable to either port, and Express Gate will automatically 32 Chapter 5: Software support
  • Asus P5Q SE | User Manual - Page 139
    all over the world. Opens Configuration Panel, which lets you specify network ASUS Express Gate supports file uploading from SATA HDDs, ODDs and USB drive and downloading to USB drives only. Shows network status; click to configure network. Shows mute status; click to change volume. ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 140
    the "ASUS Utility" panel. Click to show "About Express Gate ". Click to open Express Gate Help. Click to bring up power options window to boot to OS, restart or power down. This window is the following: 1. Open the Configuration Panel. Open Configuration Panel 5-34 Chapter 5: Software support
  • Asus P5Q SE | User Manual - Page 141
    case, you don't need to click Setup for any LAN port. If this is not the case, click Setup to configure the static IP settings manually. ASUS P5Q SE 5-35
  • Asus P5Q SE | User Manual - Page 142
    has security enabled, select the corresponding security algorithm from the drop-down list (e.g. WEPAUTO) in the Encryption Type field, and enter the password. View mode selection Image control bar ASUS Express Gate supports HDDs connected to motherboard chipsetcontrolled onboard SATA ports only.
  • Asus P5Q SE | User Manual - Page 143
    on the support DVD or download new versions from the ASUS support website. To update Express Gate 1. Double-click the Express Gate setup file to start software update. 2. A software update confirmation dialog the Express Gate setup file, choose Repair, and click Next to continue. ASUS P5Q SE 5-37
  • Asus P5Q SE | User Manual - Page 144
    5-38 Chapter 5: Software support
  • Asus P5Q SE | User Manual - Page 145
    CPU featAures The Appendix describes the CPU features and technologies that the motherboard supports.
  • Asus P5Q SE | User Manual - Page 146
    Chapter summary A A.1 Intel® EM64T A-1 A.2 Enhanced Intel SpeedStep® Technology (EIST A-1 A.3 Intel® Hyper-Threading Technology A-3 ASUS P5Q SE
  • Asus P5Q SE | User Manual - Page 147
    . A.2.1 System requirements Before using EIST, check your system if it meets the following requirements: • Intel® processor with EIST support • BIOS file with EIST support • Operating system with EIST support (Windows® Vista, Windows® XP SP2/ Linux 2.6 kernel or later versions) ASUS P5Q SE A-
  • Asus P5Q SE | User Manual - Page 148
    computer, then enter the BIOS Setup. 2. Go to the Advanced Menu, highlight CPU Configuration, then press . 3. Set the Intel(R) SpeedStep Technology item to button on the Monitor power section to open the Power Options Properties window. 8. On the Power schemes section, click , then select any
  • Asus P5Q SE | User Manual - Page 149
    Threading Technology. 2. Power up the system and enter the BIOS Setup. Under the Advanced Menu, ensure that the item Hyper‑Threading Technology is set to [Enabled]. The BIOS item appears only if you installed a CPU that supports Hyper­‑Threading Technology. 3. Restart the computer. ASUS P5Q SE A-
  • Asus P5Q SE | User Manual - Page 150
    A- Appendix: CPU features
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
Motherboard
P5Q SE