Asus P8P67 DELUXE User Manual - Page 88
Display OptionRom in POST [Enabled], Renesas Electronics USB 3.0 [Enabled] - drivers usb 3 0
View all Asus P8P67 DELUXE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
SPDIF Out Type [SPDIF] [SPDIF] Sets to [SPDIF] for SPDIF audio output. [HDMI] Sets to [HDMI] for HDMI audio output. Renesas Electronics USB 3.0 [Enabled] [Enabled] Enables the USB 3.0 controller. [Disabled] Disables the controller. VIA 1394 [Enabled] [Enabled] Enables the onboard IEEE 1394a controller. [Disabled] Disables the controller. Marvell Storage Controller [Enabled] Allows you to select the Marvell storage controller operating mode. [Disabled] Disables the controller. [Enabled] Set to [AHCI Mode] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. Marvell Storage OPROM [Enabled] This item appears only when you set the previous item to [Enabled] and allows you to enable or disable the OptionRom of the Marvell storage controller. Configuration options: [Enabled] [Disabled] JMB Storage Controller [Enabled] Allows you to enable or disable the JMB storage controller. Configuration options: [Disabled] [Enabled] If you want to use the full functin of the JMB storage contorller (ex. AHCI), we recommend that you set this item to [Enabled] and install the JMicron JMB36X Controller Driver from the motherboard support DVD. JMB Storage OPROM [Enabled] This item appears only when you set the previous item to [Enabled] and allows you to enable or disable the OptionRom of the JMB storage controller. Configuration options: [Enabled] [Disabled] Display OptionRom in POST [Enabled] This item appears only when you set the JMB Storage OPROM item to [Enabled] and allows you to display or hide the OptionRom of the JMB storage controller during POST. Configuration options: [Enabled] [Disabled] Chapter 3 3-20 Chapter 3: BIOS setup