Asus P8P67-M PRO R3 User Guide

Asus P8P67-M PRO R3 Manual

Get Asus P8P67-M PRO R3 PDF manuals and user guides View all Asus P8P67-M PRO R3 manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P8P67-M PRO R3 manual content summary:

  • Asus P8P67-M PRO R3 | User Guide - Page 1
    P8P67 PRO Motherboard
  • Asus P8P67-M PRO R3 | User Guide - Page 2
    service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL http://support.asus.com distributed problems
  • Asus P8P67-M PRO R3 | User Guide - Page 3
    ...vi Safety information...vii About this guide...viii P8P67 PRO specifications summary x Chapter 1: Product introduction 1.1 Welcome!...1-1 1.2 Package contents 1-1 1.3 Special features 1-2 1.3.1 Product highlights 1-2 1.3.2 Dual Intelligent Processors 2 with DIGI+ VRM 1-3 1.3.3 ASUS
  • Asus P8P67-M PRO R3 | User Guide - Page 4
    CrashFree BIOS 3 utility 3-34 3.10.4 ASUS BIOS Updater 3-35 Chapter 4: Software support 4.1 Installing an operating system 4-1 4.2 Support DVD information 4-1 4.2.1 Running the support DVD 4-1 4.2.2 Obtaining the software manuals 4-2 4.3 Software information 4-3 4.3.1 AI Suite II
  • Asus P8P67-M PRO R3 | User Guide - Page 5
    Contents 4.3.5 EPU 4-10 4.3.6 ASUS FAN Xpert 4-11 4.3.7 ASUS Probe II 4-12 4.3.8 Audio configurations 4-13 4.4 RAID configurations 4-14 a USB floppy disk drive 4-21 Chapter 5: Multiple GPU technology support 5.1 ATI® CrossFireX™ technology 5-1 5.1.1 Requirements 5-1 5.1.2 Before you
  • Asus P8P67-M PRO R3 | User Guide - Page 6
    that may cause undesired operation. This equipment has been tested and found to comply with the limits for a and used in accordance with manufacturer's instructions, may cause harmful interference to radio substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
  • Asus P8P67-M PRO R3 | User Guide - Page 7
    safety service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry. • Avoid dust, humidity, and temperature extremes. Do
  • Asus P8P67-M PRO R3 | User Guide - Page 8
    guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS
  • Asus P8P67-M PRO R3 | User Guide - Page 9
    of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete
  • Asus P8P67-M PRO R3 | User Guide - Page 10
    P8P67 PRO specifications summary CPU Chipset Memory Expansion slots Multi-GPU support Storage LAN Bluetooth  LGA1155 socket for Intel® 2nd Generation Core™ i7 / Core™ i5 / Core™ i3 Processors Supports 32nm CPU Supports Intel® Turbo Boost Technology 2.0* * T�h��e��In��t�e�l® Turbo Boost
  • Asus P8P67-M PRO R3 | User Guide - Page 11
    P8P67 PRO specifications summary Audio IEEE 1394 USB ASUS unique features ASUS Q-Design Realtek® ALC892 8-channel High Definition Audio CODEC - Absolute Pitch 192khz/24bit True BD Lossless Sound - BD Audio Layer Content Protection - DTS Surround Sensation UltraPC - Supports Jack-Detection, Multi-
  • Asus P8P67-M PRO R3 | User Guide - Page 12
    P8P67 PRO specifications summary ASUS exclusive overclocking features Precision Tweaker 2 - vCore: Adjustable Back panel I/O ports Internal I/O connectors BIOS features Manageability Support DVD contents Form factor Overclocking protection - ASUS C.P.R. (CPU Parameter Recall) 1 x PS/2 mouse port
  • Asus P8P67-M PRO R3 | User Guide - Page 13
    package for the following items. Chapter 1 ASUS P8P67 PRO motherboard 2 x Serial ATA 6.0 Gb/s cables 1 x ASUS Q-Shield 2 x Serial ATA 3.0 Gb/s cables 1 x ASUS SLI™ bridge connector 1x ASUS USB 3.0 Bracket 1 x 2-in-1 ASUS Q-Connector kit User Manual User guide Support DVD • If any of the above
  • Asus P8P67-M PRO R3 | User Guide - Page 14
    faster than USB 2.0. The P8P67 PRO affords greater convenience to high speed connectivity. Extra SATA 6.0 Gb/s Support The Intel® P67 Express Chipset natively supports the next-generation Serial ATA (SATA) interface, delivering up to 6.0 Gb/s data transfer. ASUS provides extra SATA 6.0 Gb/s ports
  • Asus P8P67-M PRO R3 | User Guide - Page 15
    half to enhance system stability through enabling spread spectrum. TPU Unleash your performance with ASUS' simple onboard switch or AI Suite II utility. The TPU chip offers precise Send, and Personal Manager. All are accessible through the exclusive, user-friendly ASUS interface. ASUS P8P67 PRO 1-3
  • Asus P8P67-M PRO R3 | User Guide - Page 16
    Hard Drives over 2.2TB AUS EFI BIOS natively supports hard drives larger than 2.2TB in 64-bit, with full storage space utilization, helping deliver far more exciting computing than traditional BIOS versions! ASUS Q-Design ASUS Q-Design enhances your DIY experience. All of Q-LED, Q-Slot and Q-DIMM
  • Asus P8P67-M PRO R3 | User Guide - Page 17
    efficiency requirements in regards to energy consumptions. This is in line with ASUS vision of creating environment-friendly and energyefficient products through product design and innovation to reduce carbon footprint of the product and thus mitigate environmental impacts. ASUS P8P67 PRO 1-5
  • Asus P8P67-M PRO R3 | User Guide - Page 18
    Chapter 1 1-6 Chapter 1: Product Introduction
  • Asus P8P67-M PRO R3 | User Guide - Page 19
    motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch may cause severe damage to the motherboard, peripherals, or components. ASUS P8P67 PRO 2-1
  • Asus P8P67-M PRO R3 | User Guide - Page 20
    2.2 Motherboard overview 2.2.1 Motherboard layout Chapter 2 Refer to 2.2.8 Internal Connectors for more information about rear panel connectors and internal connectors. 2-2 Chapter 2: Hardware information
  • Asus P8P67-M PRO R3 | User Guide - Page 21
    connectors (24-pin EATXPWR, 8-pin EATX12V) 3. LGA1155 CPU socket 4. DDR3 DIMM slots 5. EPU switch 6. MemOK! switch 7. blue]) 9. Intel® P67 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray]) 10. Intel® P67 Serial ATA 3.0 Gb/s connectors 2-26 2-26 2-28 Chapter 2 ASUS P8P67 PRO 2-3
  • Asus P8P67-M PRO R3 | User Guide - Page 22
    contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related. • Keep the cap after installing the motherboard
  • Asus P8P67-M PRO R3 | User Guide - Page 23
    module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations Chapter 2 ASUS P8P67 PRO 2-5
  • Asus P8P67-M PRO R3 | User Guide - Page 24
    non‑ECC DDR3 DIMMs into the DIMM sockets. • You may install varying memory max. 32GB memory capacity can be supported with DIMMs of 8GB (or above). ASUS will update QVL once the DIMMs are manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support
  • Asus P8P67-M PRO R3 | User Guide - Page 25
    DS DS DS DS DS DS DS DS DS - Chip NO. - Timing Voltage DIMM socket support (Optional) 1 DIMM 2 DIMM 4 DIMM - 1.65 • • • 8-8-8-24 1.65 • • • 9-9-9-24 1.65 • 9-9-9-24 1.65 • • 9-9-9-28 1.65 • • 9-9-9-28 1.65 • • 8 1.65 • • 9 1.65 • • 9-11-9-27 1.66 • • • ASUS P8P67 PRO 2-7
  • Asus P8P67-M PRO R3 | User Guide - Page 26
    support (Optional) 1 DIMM 2 DIMM 4 DIMM 8-8-8-24 1.55~1.75 • • 9-9-9-24 1.65 • • 9-9-9-24 1.65 • • • 9-9-9-24 1.65 • • • - 1.65 • • • 9 1.65 • • • 9-9-9 1.65 • 10-10-10 1.65 • • 9-9-9 1.65 • • • 9-9-9 1.65 • • 8-8-8-24 - • • 9-9-9-24 1.65 • • • P8P67 PRO
  • Asus P8P67-M PRO R3 | User Guide - Page 27
    8 9 - 7-6-6-24 8-8-8 7-7-7 8-8-8 8-8-8 7-7-7 8-8-8 Voltage DIMM socket support (Optional) 1 DIMM 2 DIMM 4 DIMM 1.55~1.75 • • • 1.65 • • • 1.65 • • • 1.65 • • 1.65 • • - • • 1.65 • • • 1.65 • • • 1.65 • • 1.65 • • • 1.65 • • 1.65 • • • ASUS P8P67 PRO 2-9
  • Asus P8P67-M PRO R3 | User Guide - Page 28
    DIMM socket support (Optional) 1 DIMM 2 DIMM 4 DIMM • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • P8P67 PRO Motherboard
  • Asus P8P67-M PRO R3 | User Guide - Page 29
    - - - - - - - - - - - - - - 7-7-7-20 - 9 - - - - - - - DIMM socket support (Optional) 1 DIMM 2 DIMM 4 DIMM • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • ASUS P8P67 PRO 2-11
  • Asus P8P67-M PRO R3 | User Guide - Page 30
    1.65 1.7 1.5 1.7 - - 1.75 1.75 DIMM socket support (Optional) 1 DIMM 2 DIMM 4 DIMM • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1.5-1.6 • • • 1.5-1.6 • • - • • P8P67 PRO Motherboard Qualified Vendors Lists (QVL
  • Asus P8P67-M PRO R3 | User Guide - Page 31
    . • ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. Chapter 2 ASUS P8P67 PRO 2-13
  • Asus P8P67-M PRO R3 | User Guide - Page 32
    2.2.4 Expansion slots Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Chapter 2 Slot No. Slot Description 1 PCIe 2.0 x1_1 slot 2 PCIe 2.0 x16_1 slot (single at x16 or dual at x8/x8 mode)
  • Asus P8P67-M PRO R3 | User Guide - Page 33
    shared SATA Controller - - shared - - - - - SATA 6G Controller (IO Levelup disabled or set - - - shared - - - - to USB 3.0) JMicron ATA Controller - - shared - - - - - 1394 Controller - shared - - - - - - HD Audio - - - - - - shared - ASUS P8P67 PRO 2-15
  • Asus P8P67-M PRO R3 | User Guide - Page 34
    when each timing set is tested. If the installed DIMMs still fail to boot after the whole tuning process, the DRAM_LED lights continuously. Replace the DIMMs with ones recommended in the Memory QVL (Qualified Vendors Lists) in this user manual or on the ASUS website at www.asus.com. • If you turn
  • Asus P8P67-M PRO R3 | User Guide - Page 35
    the BIOS setup program, or enable the TPU switch at the same time. However, the system will use the last setting you have made. Chapter 2 ASUS P8P67 PRO 2-17
  • Asus P8P67-M PRO R3 | User Guide - Page 36
    3. EPU switch Turning this switch to Enable will automatically detect the current PC loadings and intelligently moderate the power consumption. For ensuring the system performance, turn the switch setting to Enable when the system is powered off. • The EPU LED (O2LED2) near the EPU switch lights
  • Asus P8P67-M PRO R3 | User Guide - Page 37
    indicate key components status during POST (Power-on Self Test). If an error is found , the LED next to the error device will continue lighting until the problem is solved. This user-friendly design provides an intuitional below shows the location of the onboard LED. Chapter 2 ASUS P8P67 PRO 2-19
  • Asus P8P67-M PRO R3 | User Guide - Page 38
    3. TPU LED The TPU LED lights when the TPU switch is turned to Enable. 4. EPU LED The EPU LED lights when the EPU switch is turned to Enable. Chapter 2 2-20 Chapter 2: Hardware information
  • Asus P8P67-M PRO R3 | User Guide - Page 39
    is required to enable C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before rebooting the system. ASUS P8P67 PRO 2-21
  • Asus P8P67-M PRO R3 | User Guide - Page 40
    Technology through the onboard Intel® P67 chipset. • These connectors are or the manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service
  • Asus P8P67-M PRO R3 | User Guide - Page 41
    through the onboard Intel® P67 chipset. • These connectors or the manual bundled in the motherboard support DVD. Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions. ASUS P8P67 PRO
  • Asus P8P67-M PRO R3 | User Guide - Page 42
    Serial ATA 6.0 Gb/s signal cables. • The SATA6G_E1/E2 (navy blue) connectors are for data drives only. ATAPI device is not supported. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. • When using NCQ, set the Marvell Storage Controller item in
  • Asus P8P67-M PRO R3 | User Guide - Page 43
    so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. The USB 2.0 module is purchased separately. ASUS P8P67 PRO 2-25
  • Asus P8P67-M PRO R3 | User Guide - Page 44
    6. IEEE 1394a port connector (10-1 pin IE1394_2) This connector is for an IEEE 1394a port. Connect the IEEE 1394a module cable to this connector, then install the module to a slot opening at the back of the system chassis. Never connect a USB cable to the IEEE 1394a connector. Doing so will damage
  • Asus P8P67-M PRO R3 | User Guide - Page 45
    fan power. • Only the CPU_FAN, CHA_FAN 1 and CHA_FAN 2 connectors support the ASUS FAN Xpert feature. • If you install two VGA cards, we recommend that you plug the rear chassis fan cable to the motherboard connector labeled CHA_FAN1 or CHA_FAN2 for better thermal environment. ASUS P8P67 PRO 2-27
  • Asus P8P67-M PRO R3 | User Guide - Page 46
    Chapter 2 9. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. • We recommend that
  • Asus P8P67-M PRO R3 | User Guide - Page 47
    power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. • If you want to use two TOPower TOP-500P5 Zalman ZM600-HP Zippy HP2-6500PE (G1) ASUS P8P67 PRO 2-29
  • Asus P8P67-M PRO R3 | User Guide - Page 48
    11. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. Chapter 2 • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable
  • Asus P8P67-M PRO R3 | User Guide - Page 49
    screwdriver PC chassis Power supply unit Intel LGA 1155 CPU Intel LGA 1155 compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package. ASUS P8P67 PRO 2-31
  • Asus P8P67-M PRO R3 | User Guide - Page 50
    Chapter 2 2.3.2 1 CPU installation The LGA1156 CPU is incompatible with the LGA1155 socket. DO NOT install a LGA1156 CPU on the LGA1155 socket. A B 2 3 2-32 Chapter 2: Hardware information
  • Asus P8P67-M PRO R3 | User Guide - Page 51
    4 Chapter 2 5 C A B 6 ASUS P8P67 PRO 2-33
  • Asus P8P67-M PRO R3 | User Guide - Page 52
    Chapter 2 2.3.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. To install the CPU heatsink and fan assembly 1 A B 2 B A 3 4 2-34 Chapter 2: Hardware information
  • Asus P8P67-M PRO R3 | User Guide - Page 53
    To uninstall the CPU heatsink and fan assembly 1 2 B A B A Chapter 2 ASUS P8P67 PRO 2-35
  • Asus P8P67-M PRO R3 | User Guide - Page 54
    2.3.4 1 DIMM installation 2 Chapter 2 3 To remove a DIMM B A 2-36 Chapter 2: Hardware information
  • Asus P8P67-M PRO R3 | User Guide - Page 55
    2.3.5 1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps remain the same. 2 Chapter 2 ASUS P8P67 PRO 2-37
  • Asus P8P67-M PRO R3 | User Guide - Page 56
    3 Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. 2-38 Chapter 2: Hardware information
  • Asus P8P67-M PRO R3 | User Guide - Page 57
    2.3.6 1 ATX Power connection 2 OR OR Chapter 2 ASUS P8P67 PRO 2-39
  • Asus P8P67-M PRO R3 | User Guide - Page 58
    2.3.7 1 SATA device connection OR 2 OR Chapter 2 2-40 Chapter 2: Hardware information
  • Asus P8P67-M PRO R3 | User Guide - Page 59
    2.3.8 Front I/O Connector To install ASUS Q-Connector 1 2 IDE_LED+ IDE_LED- IDE_LED PWR Ground Reset Ground POWER SW RESET SW To install USB 2.0 Connector To install front panel audio connector Chapter 2 USB 2.0 To install USB 3.0 Connector USB 3.0 ASUS P8P67 PRO AAFP 2-41
  • Asus P8P67-M PRO R3 | User Guide - Page 60
    2.3.9 Expension Card installation To install PCIe x16 cards To install PCIe x1 cards To install PCI cards Chapter 2 2-42 Chapter 2: Hardware information
  • Asus P8P67-M PRO R3 | User Guide - Page 61
    , you have to set the JMB Storage Controller item in the BIOS setting to [Enabled] and install the JMicron JMB36X Controller Driver from the motherboard support DVD. Refer to section 3.5.6 Onboard Devices Configuration for details. ASUS P8P67 PRO 2-43
  • Asus P8P67-M PRO R3 | User Guide - Page 62
    Chapter 2 * LAN port LED indications Activity Link LED Status Description OFF No link ORANGE Linked BLINKING Data activity Speed LED Status Description OFF 10 Mbps connection ORANGE 100 Mbps connection GREEN 1 Gbps connection ** Bluetooth dongle LED indications Activity Link LED
  • Asus P8P67-M PRO R3 | User Guide - Page 63
    Connect to Stereo Speakers Connect to 2.1 channel Speakers Connect to 4.1 channel Speakers Chapter 2 ASUS P8P67 PRO 2-45
  • Asus P8P67-M PRO R3 | User Guide - Page 64
    Connect to 5.1 channel Speakers Chapter 2 Chapter 2 Connect to 7.1 channel Speakers When the DTS Surround Sensation UltraPC function is enabled, ensure to connect the rear speaker to the gray port. 2-46 Chapter 2: Hardware information
  • Asus P8P67-M PRO R3 | User Guide - Page 65
    turned on the power, the system may have failed a power-on test. Check the jumper settings and connections or call your retailer for assistance down the key to enter the BIOS Setup. Follow the instructions in Chapter 3. 2.5 Turning off the computer While the system is ON ASUS P8P67 PRO 2-47
  • Asus P8P67-M PRO R3 | User Guide - Page 66
    Chapter 2 2-48 Chapter 2: Hardware information
  • Asus P8P67-M PRO R3 | User Guide - Page 67
    BIOS" in this user manual refers to "EFI BIOS the help of a trained service personnel.ç 3.2 BIOS setup program Self-Test (POST) to enter the Setup utility. Otherwise, POST continues with its test routines. The BIOS setup program does not support the bluetooth devices. The BIOS setup ASUS P8P67 PRO 3-1
  • Asus P8P67-M PRO R3 | User Guide - Page 68
    , or enters the Advanced Mode EFI BIOS Utility - EZ Mode Monday [9/13/2010] P8P67 PRO BIOS Version : 0238 CPU Type : Genuine Intel(R) CPU 0 @ 3.10GHz Total Memory of the selected mode on the right hand side Normal mode ASUS Optimal mode Selects the boot device priority • The boot device
  • Asus P8P67-M PRO R3 | User Guide - Page 69
    the following sections for the detailed configurations. To access the EZ Mode, click Exit, then select ASUS EZ Mode. Back button Menu items Menu bar Configuration fields EFI BIOS Utility - Advanced Mode For selecting the exit options and loading default settings Chapter 3 ASUS P8P67 PRO 3-3
  • Asus P8P67-M PRO R3 | User Guide - Page 70
    Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. Back button This button appears
  • Asus P8P67-M PRO R3 | User Guide - Page 71
    . • The Administrator or User Password items on top of the screen show the default Not Installed. After you set a password, these items show Installed. Chapter 3 ASUS P8P67 PRO 3-5
  • Asus P8P67-M PRO R3 | User Guide - Page 72
    Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the
  • Asus P8P67-M PRO R3 | User Guide - Page 73
    DATA REF Voltage on CHB Auto DRAM CTRL REF Voltage on CHB Auto CPU Spread Spectrum Auto Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc. ASUS P8P67 PRO 3-7
  • Asus P8P67-M PRO R3 | User Guide - Page 74
    any of these preset overclocking configuration options: [Auto] [Manual] [X.M.P.] Loads the optimal settings for the system. Allows Overclock Tuner item to [X.M.P.] and allows you to select the X.M.P. mode supported by your memory module. Configuration options: [Disabled] [Profile #1] [Profile
  • Asus P8P67-M PRO R3 | User Guide - Page 75
    only when you set the EIST and Turbo Mode items to [Enabled]. Turbo Ratio [Auto] Allows you to manually adjust the Trubo CPU ratio. [Auto] All Turbo ratio are set by Intel CPU default settings [By Turbo Voltage [Auto] Use the and keys to adjust the value. Chapter 3 ASUS P8P67 PRO 3-9
  • Asus P8P67-M PRO R3 | User Guide - Page 76
    Frequency Mode [xxx] This item appears only when you set the Frequency item to [Manual] and allows you to set a fixed VRM frequency. Use the and keys the ASUS optimized phase tuning profile. [Extreme] Proceeds the full phase mode. [Manual Adjustment] Allows manual adjustment. Manual
  • Asus P8P67-M PRO R3 | User Guide - Page 77
    default setting, type [auto] using the keyboard and press the key. CPU Voltage [Offset Mode] [Manual Mode] Allows you to set a fixed CPU voltage. [Offset Mode] Allows you to set the Offset voltage. install the DIMMs with the voltage requirement below 1.65V. Chapter 3 ASUS P8P67 PRO 3-11
  • Asus P8P67-M PRO R3 | User Guide - Page 78
    you to set the Platform Controller Hub volage. The values range from 0.80V to 1.70V with a 0.01V interval. • The values of the CPU Manual Voltage, CPU Offset Voltage, DRAM Voltage, VCCSA Voltage, VCCIO Voltage, 1.8FSR Voltage, and PCH Voltage items are labeled in different color, indicating the
  • Asus P8P67-M PRO R3 | User Guide - Page 79
    : Select +/-: Change Opt. F1: General Help F2: Previous Values F5: Optimized Defaults F10: Save ESC: Exit Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc. Chapter 3 ASUS P8P67 PRO 3-13
  • Asus P8P67-M PRO R3 | User Guide - Page 80
    Processor Speed Processor Stepping Microcode Revision Processor Cores Intel HT Technology CPU Ratio Range CPU Current Ratio Supported 3100 MHz 206a5 4 4 Supported 16-31 31 CPU Ratio Auto Intel Adaptive Thermal Monitor Enabled Hyper-threading Enabled Active Processor
  • Asus P8P67-M PRO R3 | User Guide - Page 81
    frequency in specific condition. Disables this function. CPU C1E [Enabled] [Enabled] Enables the C1E support function. This item should be enabled in order to enable the Enhanced Halt State. [Disabled] Allows you to disable or enable the CPU C6 report to OS. Chapter 3 ASUS P8P67 PRO 3-15
  • Asus P8P67-M PRO R3 | User Guide - Page 82
    3.5.2 System Agent Configuration EFI BIOS Utility - Advanced Mode Exit Main Back Ai Tweaker Advanced Advanced\ System Agent Configuration > Monitor System Agent Configuration Initate Graphic Adapter PEG/PCI Boot Tool Select which graphics controller to use as the primary boot device.
  • Asus P8P67-M PRO R3 | User Guide - Page 83
    item to [IDE Mode] [Disabled] [Enhanced] [Compatible] Disables the SATA function. Set to [Enhanced] to support two SATA 6.0 Gb/s and two SATA 3.0 Gb/s devices. Set to [Compatible] when using Windows 98/NT/ the POST. Configuration options: [Enabled] [Disabled] Chapter 3 ASUS P8P67 PRO 3-17
  • Asus P8P67-M PRO R3 | User Guide - Page 84
    . The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] [Enabled] Enables the support for USB devices on legacy operating systems (OS). [Disabled] The USB devices can be used only for the BIOS setup program
  • Asus P8P67-M PRO R3 | User Guide - Page 85
    legacy AC'97 or highdefinition audio depending on the audio standard that the front panel audio module supports. [HD] [AC97] Sets the front panel audio connector (AAFP) mode to high definition audio. Sets the front panel audio connector (AAFP) mode to legacy AC'97 Chapter 3 ASUS P8P67 PRO 3-19
  • Asus P8P67-M PRO R3 | User Guide - Page 86
    runs at X1 mode for system resource optimization. (PCIeX1_2 will be disabled.) [X4 mode] PCIeX16_3 slot runs at X4 mode for high performance support. (USB3_34, eSATA ports, PCIeX1_1, PCIeX1_2 will be disabled.) [X1 mode] PCIeX16_3 slot runs at X1 mode with all slots enabled. (USB3_34 will be
  • Asus P8P67-M PRO R3 | User Guide - Page 87
    : [Enabled] [Disabled] Change Settings [IO=3F8h; IRQ=4] Allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [�IO��=�2�F�8�h��; �IR��Q�=��3 IO��=�3�E���8���h I�R����Q 4�]�� [I�O��=�2�E�8�h�;�I�R�Q��=�3�]� Chapter 3 ASUS P8P67 PRO 3-21
  • Asus P8P67-M PRO R3 | User Guide - Page 88
    3.5.7 APM EFI BIOS Utility - Advanced Mode Exit Main Back Ai Tweaker Advanced\ APM > Advanced Monitor Restore AC Power Loss Power Off Power On By PS/2 Keyboard Disabled Power On By PS/2 Mouse Disabled Power On By PCI Disabled Power On By PCIE Disabled Power On By Ring Disabled
  • Asus P8P67-M PRO R3 | User Guide - Page 89
    3V Voltage +3.312 V 5V Voltage +5.080 V 12V Voltage +12.192 V Anti Surge Support Enabled Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc. CPU Temperature / MB the field shows N/A. Select Ignore if you do not wish to display the detected speed. Chapter 3 ASUS P8P67 PRO 3-23
  • Asus P8P67-M PRO R3 | User Guide - Page 90
    temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan operation. [Turbo] Sets to [Turbo] to achieve maximum CPU fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The following four items appear only when you set CPU Fan Profile to
  • Asus P8P67-M PRO R3 | User Guide - Page 91
    to [Turbo] to achieve maximum chassis fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The following four Support [Enabled] This item allows you to enable or disable the Anti Surge function. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS P8P67 PRO
  • Asus P8P67-M PRO R3 | User Guide - Page 92
    ] Enables the full screen logo display feature. [Disabled] Disables the full screen logo display feature. Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. Option ROM Messages [Force BIOS] [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence
  • Asus P8P67-M PRO R3 | User Guide - Page 93
    3.8.1 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more details, refer to section 3.10.2 ASUS EZ Flash 2 utility. ASUS P8P67 PRO
  • Asus P8P67-M PRO R3 | User Guide - Page 94
    you to store or load multiple BIOS settings. EFI BIOS Utility - Advanced Mode Exit Main Back Ai Tweaker Tool\ ASUS O.C. Profile > Advanced Monitor O.C. Profile Configuration Setup Profile1 Status : Not Installed Setup Profile2 Status : Not Installed Setup Profile3 Status
  • Asus P8P67-M PRO R3 | User Guide - Page 95
    to discard changes and exit�. ASUS EZ Mode This option allows you to enter the EZ Mode screen. Launch EFI Shell from filesystem device This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available filesystem devices. Chapter 3 ASUS P8P67 PRO 3-29
  • Asus P8P67-M PRO R3 | User Guide - Page 96
    If there is no problem using the current version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result in the system's failure to boot. Carefully follow the instructions of this chapter to update your BIOS if necessary. Visit the ASUS website (www.asus.com) to download the
  • Asus P8P67-M PRO R3 | User Guide - Page 97
    Chapter 3 4. You can decide whether to change the BIOS boot logo, which is the image appearing on screen during the Power‑On Self-Tests (POST). Click Yes if you want to change the boot logo or No to continue. 5. Follow the onscreen instructions to complete the update process. ASUS P8P67 PRO 3-31
  • Asus P8P67-M PRO R3 | User Guide - Page 98
    No to continue. 4. Follow the onscreen instructions to complete the update process. • The screenshots in this section are for reference only. The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software
  • Asus P8P67-M PRO R3 | User Guide - Page 99
    th�e� Tool menu to select ASUS EZ Flash Utility and press to enable it. ASUSTek EZ Flash BIOS ROM Utility V00.75 Flash Info MODEL: P8P67 PRO fs0:\ Drive fs0:\ fs1:\ Enter> to perform the BIOS update process. Reboot the system when the update process is done. Chapter 3 ASUS P8P67 PRO 3-33
  • Asus P8P67-M PRO R3 | User Guide - Page 100
    website. If you want to use the newer BIOS file, download the file at support.asus.com and save it to a USB flash drive. Recovering the BIOS To recover the BIOS: 1. Turn on the system. 2. Insert the motherboard support DVD to the optical drive, or the USB flash drive containing the BIOS file
  • Asus P8P67-M PRO R3 | User Guide - Page 101
    the latest BIOS file and BIOS Updater from the ASUS website at http:// support.asus.com and save them on the USB flash drive. • NTFS is not supported under DOS environment. Do not save the BIOS USB flash drive). Welcome to FreeDOS (http://www.freedos.org)! C:\>d: D:\> Chapter 3 ASUS P8P67 PRO 3-35
  • Asus P8P67-M PRO R3 | User Guide - Page 102
    backup is done, press any key to return to the DOS prompt. ASUSTek BIOS Updater for DOS V1.18 [2010/04/29] Current ROM BOARD: P8P67 PRO VER: 0204 DATE: 08/05/2010 Update ROM BOARD: Unknown VER: Unknown DATE: Unknown PATH: A:\ BIOS backup is done! Press any key to continue. Note
  • Asus P8P67-M PRO R3 | User Guide - Page 103
    to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3 of your motherboard user manual for details. • Ensure to connect all SATA hard disk drives after updating the BIOS file if you have disconnected them. ASUS P8P67 PRO 3-37
  • Asus P8P67-M PRO R3 | User Guide - Page 104
    Chapter 3 3-38 Chapter 3: BIOS setup
  • Asus P8P67-M PRO R3 | User Guide - Page 105
    the ASUS contact information. Click an icon to display DVD/ motherboard information Chapter 4 If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the DVD. ASUS P8P67 PRO 4-1
  • Asus P8P67-M PRO R3 | User Guide - Page 106
    support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening the files. 1. Click the Manual tab. Click ASUS Motherboard Utility Guide from
  • Asus P8P67-M PRO R3 | User Guide - Page 107
    the Tool menu vary with models. • The screeshots of AI Suite II in this user manual are for reference only. The actual screenshots vary with models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P8P67 PRO 4-3
  • Asus P8P67-M PRO R3 | User Guide - Page 108
    boost may vary depending on your CPU specification. • Do not remove the thermal module. The thermal conditions should be monitored. Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. Chapter 4 4-4 Chapter 4: Software
  • Asus P8P67-M PRO R3 | User Guide - Page 109
    the ASUS website at www.asus.com for detailed software configuration. • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ASUSTek Computer Inc. is under license. Other trademarks and trade names are those of their respective owners. ASUS P8P67 PRO
  • Asus P8P67-M PRO R3 | User Guide - Page 110
    , launch TurboV EVO by clicking Tool > TurboV EVO on the AI Suite II main menu bar. Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. TurboV TurboV allows you to overclock the BCLK frequency, CPU voltage, IMC voltage, and
  • Asus P8P67-M PRO R3 | User Guide - Page 111
    all changes without applying Applies all changes immediately CPU Ratio Allows you to manually adjust the CPU ratio. The first time you use CPU Ratio, go to CPU Ratio Click to restore all start-up settings ASUS P8P67 PRO Click to activate the CPU Ratio Applies all changes immediately Undoes all changes
  • Asus P8P67-M PRO R3 | User Guide - Page 112
    TurboV. Refer to Chapter 3 of your motherboard user manual for details. • The CPU Ratio bars show the status of the CPU cores, which vary with your CPU model. Auto Tuning ASUS TurboV EVO includes two auto tuning modes, providing the most flexible 4-8 Chapter 4: Software support
  • Asus P8P67-M PRO R3 | User Guide - Page 113
    click Stop in the previous step, TurboV automatically starts further system overclocking and stability test. An animation appears indicating the overclocking process. Click Stop if you want to cancel , a message appears indicating auto tuning success. Click OK to exit. ASUS P8P67 PRO 4-9 Chapter 4
  • Asus P8P67-M PRO R3 | User Guide - Page 114
    and Fan Control. Launching EPU After installing AI Suite II from the motherboard support DVD, launch EPU by clicking Tool > EPU on the AI Suite II • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. 4-10 Chapter
  • Asus P8P67-M PRO R3 | User Guide - Page 115
    environment. Launching FAN Xpert After installing AI Suite II from the motherboard support DVD, launch FAN Xpert by clicking Tool > Fan Xpert on the AI the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P8P67 PRO 4-11 Chapter
  • Asus P8P67-M PRO R3 | User Guide - Page 116
    of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility, you are assured that your computer is always at a healthy operating condition. Launching Probe II After installing AI Suite II from the motherboard support DVD
  • Asus P8P67-M PRO R3 | User Guide - Page 117
    Manager for Windows XP Configuration options Control settings window Information button Exit button Minimize button Chapter 4 Information button Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P8P67 PRO 4-13
  • Asus P8P67-M PRO R3 | User Guide - Page 118
    the following SATA RAID solution: Intel® Rapid Storage Technology with RAID 0, RAID 1, RAID 10 and RAID 5 support. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP
  • Asus P8P67-M PRO R3 | User Guide - Page 119
    4.4.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and ) Non-RAID Disk Non-RAID Disk Non-RAID Disk Non-RAID Disk Chapter 4 [↑↓]-Select ASUS P8P67 PRO [ESC]-Exit [ENTER]-Select Menu 4-15
  • Asus P8P67-M PRO R3 | User Guide - Page 120
    RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. Creating a RAID set To create a RAID set: 1. From the utility main menu, select 1. Create RAID Volume
  • Asus P8P67-M PRO R3 | User Guide - Page 121
    create this volume? (Y/N): 9. Press to create the RAID volume and return to the main menu, or to go back to the CREATE VOLUME menu. Chapter 4 ASUS P8P67 PRO 4-17
  • Asus P8P67-M PRO R3 | User Guide - Page 122
    appears: [ CONFIRM EXIT ] Are you sure you want to exit? (Y/N): 2. Press to exit or press to return to the utility main menu. 4-18 Chapter 4: Software support Chapter 4
  • Asus P8P67-M PRO R3 | User Guide - Page 123
    Plug the USB floppy disk drive and insert a floppy disk. 3. Place the motherboard support DVD into the optical drive. 4. Go to the Make Disk menu, and then screen instructions to complete the process. Write-protect the floppy disk to avoid a computer virus infection. Chapter 4 ASUS P8P67 PRO 4-19
  • Asus P8P67-M PRO R3 | User Guide - Page 124
    the USB flash drive with RAID driver into the USB port or the support DVD into the optical drive, and then click Browse. 3. Click the name for the corresponding OS version. Click OK. 4. Follow the succeeding screen instructions to complete the installation. Before loading the RAID driver from a USB
  • Asus P8P67-M PRO R3 | User Guide - Page 125
    disk to locate the file txtsetup.oem. 6. Double-click the file. A window appears, allowing you to select the program for opening the oem file. Chapter 4 ASUS P8P67 PRO 4-21
  • Asus P8P67-M PRO R3 | User Guide - Page 126
    ", "usbstor" Add the same line to both sections. The VID and PID vary with different vendors. 10. Save and exit the file. 4-22 Chapter 4: Software support Chapter 4
  • Asus P8P67-M PRO R3 | User Guide - Page 127
    dual-GPU graphics card that are ATI® certified. • Ensure that your graphics card driver supports the ATI CrossFireX technology. Download the latest driver from the AMD website (www.amd.com). , select Add/Remove. For Windows Vista, select Uninstall. 5. Turn off your computer. ASUS P8P67 PRO 5-1
  • Asus P8P67-M PRO R3 | User Guide - Page 128
    slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. 3. Ensure that the DVI cable to the graphics card. goldfingers 5-2 Chapter 5: Multiple GPU technology support
  • Asus P8P67-M PRO R3 | User Guide - Page 129
    card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the ATI® CrossFireX™ technology. Download the latest driver from the AMD website (www.amd Enable CrossFireX. 4. Click Apply, and then click OK to exit the window. 2 3 4 ASUS P8P67 PRO 5-3
  • Asus P8P67-M PRO R3 | User Guide - Page 130
    • Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified graphics card and supported 3D application list. has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation.
  • Asus P8P67-M PRO R3 | User Guide - Page 131
    graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the NVIDIA® SLI™ technology. Download the latest driver from the NVIDIA website (www.nvidia.com Control Panel. The NVIDIA Control Panel window appears (See Step B5). ASUS P8P67 PRO 5-5
  • Asus P8P67-M PRO R3 | User Guide - Page 132
    Chapter 5 B1. If you cannot see the NVIDIA Control Panel item in step (A), select Personalize. B2. From the Personalization window, select Display Settings. B3. From the Display Settings dialog box, click Advanced Settings. 5-6 Chapter 5: Multiple GPU technology support
  • Asus P8P67-M PRO R3 | User Guide - Page 133
    the NVIDIA Control Panel window, select Set SLI Configuration. Click Enable SLI and set the display for viewing SLI rendered content. When done, click Apply. ASUS P8P67 PRO 5-7
  • Asus P8P67-M PRO R3 | User Guide - Page 134
    Chapter 5 5-8 Chapter 5: Multiple GPU technology support
  • Asus P8P67-M PRO R3 | User Guide - Page 135
    CA 94539, USA Telephone +1-812-282-3777 Fax +1-510-608-4555 Web site usa.asus.com Technical Support Telephone Support fax Online support +1-812-282-2787 +1-812-284-0883 support.asus.com ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany
  • Asus P8P67-M PRO R3 | User Guide - Page 136
    , TAIWAN R.O.C. Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name : Motherboard Model name : P8P67 PRO conform with the essential requirements of the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
Motherboard
P8P67 PRO