Asus PU-DL Manual pdf format file for PU-DLS/PU-DL M/B
Asus PU-DL Manual
 |
View all Asus PU-DL manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus PU-DL manual content summary:
- Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 1
Motherboard PU-DLS PU-DL User Guide - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 2
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 3
vii About this guide viii ASUS contact information x PU-DLS/PU-DL specifications summary xi Chapter 1: Product introduction 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features 1-2 1.3.1 Product highlights 1-2 1.3.2 Value-added solutions 1-4 1.4 Motherboard overview 1-6 1.4.1 Major - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 4
BIOS setup 4.1 Managing and updating your BIOS 4-1 4.1.1 Creating a bootable disk 4-1 4.1.2 Updating the BIOS 4-3 4.2 BIOS Setup program 4-5 4.2.1 BIOS 4-28 4.7 Server Menu 4-30 4.8 Exit Menu 4-31 Chapter 5: Driver installation 5.1 Support CD contents 5-1 5.1.1 Drivers 5-1 5.1.2 Management - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 5
® Rage XL Display Driver Installation 5-30 5.5 Novell ®NetWare® Server 5-31 5.5.1 Adaptec® SCSI Driver Installation 5-31 5.5.2 Intel® 82544GC/82540EM LAN driver installation 5-36 5.5.3 ATI® Rage XL Display Driver Installation 5-38 5.6 SCO Open Server 5.0.6 5-39 5.6.1 Intel® 82544GC/82540EM LAN - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 6
. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 7
add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged. • Seek professional assistance before a stable surface. • If you encounter technical problems with the product, contact a qualified service technician or your retailer. vii - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 8
the information you need when installing the ASUS PU-DLS/PU-DL motherboard. How this guide is organized This manual contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the PU-DLS/PU-DL motherboard. It includes brief descriptions of the special - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 9
this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. WARNING updates. 1. ASUS Websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. The ASUS websites are listed in the ASUS - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 10
Desktop/Server (Tel): +886-2-2890-7123 (English) Support Fax: +886-2-2890-7698 Web Site: www.asus.com.tw ASUS Support Support Hotlines: Components: +49-2102-9599-0 Notebook PC: +49-2102-9599-10 Support (Email): www.asuscom.de/kontakt (for online support) Web Site: www.asuscom.de Support - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 11
, and SCSI LED connector are available only on PU-DLS models. CPU Support for dual Intel® Xeon™ processors with speeds up to 3.06 GHz On-die 512KB L2 cache Chipsets Intel E7501 (Plumas 533) MCH Intel ICH3-S I/O Hub P64H2 PCI-X Hub Front Side Bus (FSB) 533/400 MHz Memory 6 x 184-pin DDR DIMM - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 12
PU-DLS/PU-DL specifications summary BIOS features Form Factor Support CD contents 4Mb Firmware Hub (FWH), Award BIOS with ACPI, DMI, Green, PnP features, and Enhanced Server BIOS features Extended ATX form factor: 12 in x 13 in (30.5 cm x 33 cm) Device drivers Management software Utilities Contact - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 13
Chapter 1 This chapter describes the features of the PU-DLS/PU-DL motherboard. It includes brief explanations of the special attributes of the motherboard and the new technology it supports. Product introduction - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 14
Chapter summary 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features 1-2 1.4 Motherboard overview 1-6 ASUS PU-DLS/PU-DL motherboard - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 15
The ASUS PU-DLS/PU-DL motherboard delivers a host of new features and latest technologies making it another standout in the long line of ASUS quality server motherboards! The PU-DLS/PU-DL incorporates dual Intel® Xeon™ processors in 604-pin package coupled with the Intel® E7501 (Plumas 533) chipset - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 16
Latest processor technology The PU-DLS/PU-DL motherboard supports the Intel® Xeon processor via dual 604-pin surface mount ZIF sockets. The processor features the Intel® NetBurst™ micro-architecture that includes hyper-threading technology, a rapid execution engine, a 533/400MHz system bus, and - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 17
only on PU-DLS models. ATA/100 IDE support The dual-channel bus master IDE connectors comply with the ATA/100 protocol and supports ATA/100, Multi-Word DMA Mode2, PIO modes 3 & 4 IDE devices such as ATAPI IDE CD-ROM, CD-R/RW, ZIP, and LS-120 drives. ASUS PU-DLS/PU-DL motherboard user guide 1-3 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 18
fan, and voltage monitoring The CPU temperature is monitored by the ASUS ASIC to prevent overheating and damage. The system fan rotations per the soft-off mode regardless of the BIOS setting. Wake-Up support The motherboard includes Wake-On-LAN, Wake-On-Ring, and BIOS Wake-Up features. ACPI ready The - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 19
management for configuring and managing all system components, 32-bit device drivers, and installation procedures for Windows NT/2000/XP. Color-coded connectors and descriptive icons make identification easy as required by the PC '99 specification. ASUS PU-DLS/PU-DL motherboard user guide 1-5 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 20
PU-DLS/PU-DL motherboard as pointed out in the picture on page 1-7. 1. SSI-type power connector 2. DDR DIMM sockets 3. Intel® E7501 northbridge 4. Intel LED 12. SCSI connector 13. ASUS ASIC 14. CPU Power Fail LED 15. LPC Super I/O controller 16. Floppy connector 17. Intel® ICH3-S I/O Hub 18. ATI - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 21
12 3 4 5 6 21 20 19 22 7 8 9 10 11 18 17 16 15 14 13 12 23 29 28 27 26 25 24 ASUS PU-DLS/PU-DL motherboard user guide 1-7 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 22
transfers of 320Mbps. The onboard SCSI connectors are available only on PU-DLS models. 8 Adaptec® AIC-7902W SCSI controller. The 7902W SCSI controller is a PCI-X dual-channel Ultra320 SCSI ASIC compliant to PC 2000-2001. Each channel supports a data transfer rate up to 320 MB/s on a Wide (16-bit - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 23
connector is slotted to prevent incorrect insertion of the floppy disk cable. 17 Intel® ICH3-S I/O hub. The I/O Controller Hub 3 (ICH3-S) provides the . This PCI-based VGA controller supports 8MB display SDRAM for 1280x1024 and true color resolutions. ASUS PU-DLS/PU-DL motherboard user guide 1-9 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 24
100/1000 Mbps data transfer rates. 21 Intel® 82545GC 64-bit PCI-X Gigabit Ethernet controller. This LAN controller is integrated Ethernet LAN component that supports 10/100/1000Mbps data rates. The 82544GC is optimized for LAN on Motherboard (LOM), enterprise networking, and Internet appliances that - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 25
Chapter 2 This chapter describes the hardware setup procedures that you have to perform when installing system components. It includes details on the switch/jumper settings and connector locations on the motherboard. Hardware information - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 26
Chapter summary 2.1 Motherboard installation 2-1 2.2 Motherboard layout 2-2 2.3 Before you proceed 2-3 2.4 Central Processing Unit (CPU 2-4 2.5 System memory 2-8 2.6 Expansion slots 2-11 2.7 Jumpers 2-14 2.8 Connectors 2-18 ASUS PU-DLS/PU-DL motherboard - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 27
in the image below. 2.1.2 Screw holes Place 10 screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so may damage the motherboard. Place this side towards the rear of the chassis. ASUS PU-DLS/PU-DL motherboard user guide 2-1 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 28
I/O ASUS ASIC with Hardware Monitor J4 J6 WOR1 Intel I/O Controller Hub (ICH3-S) FLOPPY1 SCSI-B 34 68 CPULED1 4Mbit Firmware Hub J5 J12 J11 IDE2 BUZZ1 IDE1 PANEL 1 35 LED1 The SCSI features are available only on PU-DLS models. These components are grayed out in the above motherboard - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 29
-off mode, a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. CPULED1 ® PU-DLS PU-DLS Onboard LED ON CPU Failure OFF CPU OK LED1 ON Standby Power OFF Powered Off ASUS PU-DLS/PU-DL motherboard user guide 2-3 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 30
533/400MHz system bus, and execution trace cache. Together, these attributes improve system performance by allowing higher core frequencies, faster execution of integer instructions, and data transfer rate of up to 4.2/3.2GB/s. ® PU-DLS Prestonia Gold Arrow PU-DLS The motherboard supports either - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 31
CPU in socket 1. Follow these steps to install a CPU. 1. Locate the 604-pin ZIF sockets on the motherboard. Unlock the socket by pressing the lever sideways, then lift it up to at least 115° angle. Make on the side tab to indicate that it is locked. ASUS PU-DLS/PU-DL motherboard user guide 2-5 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 32
2.4.3 Installing the CPU heatsink and fan The Intel® Xeon™ processors require specially designed heatsink and fan assembly to ensure optimum thermal condition the corner of the plastic retention base. (The retention base comes installed with the motherboard.) 2-6 Chapter 2: Hardware information - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 33
Use a small flat screw driver to attach the other end motherboard labeled CPUFAN1 (for the CPU on socket 1) and CPUFAN2 (for the CPU on socket 2). Don't forget to connect the CPU fan cable. Hardware monitoring problems may occur if you fail to plug the cable. ASUS PU-DLS/PU-DL motherboard user guide - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 34
2.5.1 Overview The motherboard comes with six Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets. These sockets support up to 12GB system memory using 184-pin registered PC2100/1600 DIMMs with Serial Presence Detect (SPD) and Error Check and Correction (ECC). ® PU-DLS PU-DLS 184-Pin - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 35
lists the DIMM socket pairs and the memory modules that you can install. The system chipset only supports PC2100/1600 registered ECC DIMMs. Make sure to use only the specified DIMM types for to install identical (the same type and size) DDR DIMM pairs. ASUS PU-DLS/PU-DL motherboard user guide 2-9 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 36
components. Failure to do so may cause severe damage to both the motherboard and the components. Follow these steps to install a DIMM. 1. Unlock outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 37
and the expansion cards that they support. Make sure to unplug the BIOS settings, if any. See Chapter 4 for information on BIOS setup. 2. Assign an IRQ to the card. Refer to the tables on the next page. 3. Install the software drivers for the expansion card. ASUS PU-DLS/PU-DL motherboard user guide - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 38
slot (supports ZCR) PCIX2 slot PCIX3 slot PCIX4 slot (riser slot A) PCIX4 slot (riser slot B) PCIX4 slot (riser slot C) PCI1 slot PCI2 slot Onboard 82540 controller Onboard 82544GC controller Onboard SCSI controller* Onboard VGA controller Onboard P64H2 controller *Available only on PU-DLS model - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 39
above applies only on PU-DLS models. PCI1/PCI2 slots PCI1 and PCI2 are 32-bit/33MHz 5V PCI slots. PCI1 has a Low Pin Count (LPC) signal connector to accommodate the ASUS Server Management Card. The PCI bus speed for these slots is fixed at 33MHz. ASUS PU-DLS/PU-DL motherboard user guide 2-13 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 40
operation. 1. CPU external frequency selection (J16) This jumper allows you to select your desired CPU external frequency (or bus clock). ® PU-DLS PU-DLS CPU External Frequency Selection J16 12 CPU speed AUTO detect (Default) 23 100MHz 1 23 133MHz 2. SCSI setting (J13) This jumper allows - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 41
to pins 1-2 to enable the onboard Intel 82540EM 32-bit Gigabit Ethernet controller and support 10/100/1000 Mbps networking. Set to pins 2-3 to disable the controller. ® PU-DLS J1 12 23 Enable (Default) Disable PU-DLS Intel 82540 LAN Chip Setting ASUS PU-DLS/PU-DL motherboard user guide 2-15 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 42
Set this jumper to pins 1-2 to disable the keyboard wake-up feature. Set to pins 2-3 to enable the wake-up feature. ® PU-DLS J14 12 23 Disable (Default) Enable PU-DLS Keyboard WAKE-UP Setting 6. Onboard VGA setting (J2) This jumper allows you to enable or disbale the onboard VGA feature. Set - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 43
and enter BIOS setup to re-enter data. Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure! ® PU-DLS PU-DLS Clear RTC RAM J3 12 23 Clear CMOS Normal (Default) ASUS PU-DLS/PU-DL motherboard user guide 2-17 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 44
(34-1 pin FLOPPY1) This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug). ® PU-DLS FLOPPY1 PIN 1 NOTE: Orient - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 45
its jumper accordingly. Refer to the hard disk documentation for the jumper settings. BIOS supports specific device bootup. If you have more than two UltraDMA/100/66 devices, /66 cable included in the motherboard package also supports UltraDMA/100. ASUS PU-DLS/PU-DL motherboard user guide 2-19 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 46
In addition to the 24/20-pin SSI/ATXPWR connector (U21), this motherboard requires that you connect the 8/4-pin SSI12V/ATX12V (U58) power plug +5 Volts +5 Volts +5 Volts Ground ® PU-DLS GND GND GND For Power Supply with 4-pin Power Connector PU-DLS SSI/ATX Power Connector U58 (SSI12V/ATX12V) - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 47
SCSI connectors are available only on PU-DLS models. SCSI Connection Notes The PU-DLS motherboard has two 68-Pin Ultra320 SCSI connectors; one for each of the two channels. The onboard SCSI chipset incorporates an advanced multi-mode I/O cell that supports both single-ended (SE), Ultra2, Ultra160 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 48
of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! ® PU-DLS CPU_FAN1 CHASSIS_FAN2 GND +12V Rotation Rotation +12V GND PU-DLS 12-V Fan Connectors Rotation +12V GND CHASSIS_FAN1 CPU_FAN2 GND - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 49
PU-DLS eRMC Connector 9. IPMI connector (4-pin CON2) The Intelligent Platform Management Interface (IPMI) connector is for the ASMC card. Connect the 4-pin ASMC interface cable to this connector. CON2 PU-DLS IPMI Connector ® PU-DLS NC IPMICLK GND IPMIDATA ASUS PU-DLS/PU-DL motherboard user guide - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 50
memory modules with ECC, and predictive caching capability. SMBCLK Ground SMBDATA +3V ® PU-DLS PU-DLS Zero-Channel RAID Zero Channel RAID (ZCR) functions are not supported on PU-DL models. PU-DL motherboards support other PCI-X add-on cards on the PCIX1. 2-24 Chapter 2: Hardware information - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 51
Lock Speaker Power LED Connector +5VSB PLED Keylock Ground +5V Ground Ground Speaker +5 V MLED ExtSMI# Ground PWR Ground Reset Ground PU-DLS System Panel Connectors Message LED SMI Lead Reset SW ATX Power Switch* * Requires an ATX power supply. ASUS PU-DLS/PU-DL motherboard user guide 2-25 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 52
system message LED feature requires an ACPI OS and driver support. • System Warning Speaker Lead (4-pin SPEAKER) , or ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the power switch while in mounted suspend switch, and allows you to manually place the system into "Suspend Mode" or - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 53
Chapter 3 This chapter describes the power up sequence and gives information on the BIOS beep codes. Powering up - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 54
Chapter summary 3.1 Starting up for the first time 3-1 3.2 Powering off the computer 3-2 ASUS PU-DLS/PU-DL motherboard - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 55
: a. Monitor b. External SCSI devices (starting with the last device on the chain) (For PU-DLS models only.) c. System power (if you are using an ATX power supply, you need to hold down to enter BIOS Setup. Follow the instructions in Chapter 4. ASUS PU-DLS/PU-DL motherboard user guide 3-1 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 56
3.2 Powering off the computer You must first exit the operating system and shut down the system before switching off the power. For ATX power supplies, you can press the ATX power switch after exiting or shutting down the operating system. If you use Windows 2000/XP, click the Start button, click - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 57
Chapter 4 This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS setup - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 58
Chapter summary 4.1 Managing and updating your BIOS 4-1 4.2 BIOS Setup program 4-5 4.3 Main Menu 4-8 4.4 Advanced Menu 4-15 4.5 Power Menu 4-23 4.6 Boot Menu 4-28 4.7 Server Menu 4-30 4.8 Exit Menu 4-31 ASUS PU-DLS/PU-DL motherboard - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 59
in the DOS prompt within Windows, and does not work with certain memory drivers that may be loaded when you boot from the hard drive. It is or is not supported by the ACPI BIOS and therefore, cannot be programmed by the Flash Memory Writer utility. ASUS PU-DLS/PU-DL motherboard user guide 4-1 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 60
5. Select 1. Save Current BIOS to File from the Main menu and press . The Save Current BIOS To File screen appears. 6. Type a filename and the path, for example, A:\XXX-XX.XXX, then press . 4-2 Chapter 4: BIOS Setup - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 61
Boot Block and ESCD screen appears. 5. Type the filename of your new BIOS and the path, for example, A:\XXX-XX.XXX, then press . To cancel this operation, press . 6. When prompted to confirm the BIOS update, press Y to start the update. ASUS PU-DLS/PU-DL motherboard user guide 4-3 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 62
process, and if the problem persists, load the original BIOS file you saved to the boot disk. If the Flash Memory Writer utility is not able to successfully update a complete BIOS file, the system may not boot. If this happens, call the ASUS service center for support. 4-4 Chapter 4: BIOS Setup - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 63
and make your selections among the predetermined choices. Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purposes only, and may not exactly match what you see on your screen. ASUS PU-DLS/PU-DL motherboard user guide 4-5 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 64
system device used to locate and load the Operating System. SERVER Use this menu to set server-related items EXIT Use this menu to exit the current menu > or Displays the General Help screen from anywhere in the BIOS Setup Jumps to the Exit menu or returns to the main menu from - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 65
General help In addition to the Item Specific Help window, the BIOS setup program also provides a General Help screen. You may launch this screen from any menu by simply each menu. This window displays the help text for the currently highlighted field. ASUS PU-DLS/PU-DL motherboard user guide 4-7 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 66
. Configuration options: [None] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.] Floppy 3 Mode Support [Disabled] This is required to support older Japanese floppy drives. The Floppy 3 Mode feature allows reading and writing of 1.2MB (as opposed to 1.44MB) on - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 67
BIOS Setup program and to gain full access to the configuration fields. Forgot the password? If you forget your password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. The RAM memory detected by the system during the boot process. ASUS PU-DLS/PU-DL motherboard user guide 4-9 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 68
on an older system, Setup may detect incorrect parameters. In these cases, select [User Type HDD] to manually enter the IDE hard disk drive parameters. Refer to the next section for details. Before attempting to configure a to fail to recognize the installed hard disk. 4-10 Chapter 4: BIOS Setup - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 69
Manually enter the number of cylinders, heads and sectors per track for the drive. Refer to the drive documentation or on the drive label for this information. After entering the IDE hard disk drive information into BIOS disk drive that you configured. ASUS PU-DLS/PU-DL motherboard user guide 4-11 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 70
the Translation Method field to [Manual]. CHS Capacity This field shows the drive's maximum CHS capacity as calculated by the BIOS based on the drive information number of sectors per block to the highest number that the drive supports. Note that when this field is automatically configured, the set - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 71
. Set to [Disabled] to suppress Ultra DMA capability. To make changes to this field, set the Type field to [User Type HDD]. Configuration options: [0] [1] [2] [3] [4] [5] [Disabled] ASUS PU-DLS/PU-DL motherboard user guide 4-13 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 72
Auto-Repeat Delay [1/4 Sec] This field sets the time interval for displaying the first and second characters. Configuration options: [1/4 Sec] [1/2 Sec] [3/4 Sec] [1 Sec] 4-14 Chapter 4: BIOS Setup - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 73
] This field functions as an update loader integrated into the BIOS to supply the processor with the required data. When set to [Enabled], the BIOS loads the update on all processors during system bootup. Configuration options: [Disabled] [Enabled] ASUS PU-DLS/PU-DL motherboard user guide 4-15 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 74
be used for expansion cards. When you set this field to [Enabled], BIOS reserves IRQ12, whether or not a PS/2 mouse is detected at startup. [Disabled]. Configuration options: [Disabled] [Enabled] USB Legacy Support [Auto] This motherboard supports Universal Serial Bus (USB) devices. The default of - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 75
the latency between the DDR SDRAM active command and the read/write command. It is recommended to keep the default setting for stable system operation. ASUS PU-DLS/PU-DL motherboard user guide 4-17 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 76
by caching the display data. You must set this to UC (uncacheable) if your display card does not support this feature, otherwise the system may not boot. Configuration options: [UC] [USWC] Memory Hole At ]. Configuration options: [Both] [Primary] [Secondary] [Disabled] 4-18 Chapter 4: BIOS Setup - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 77
connector. If you disable this field, the Parallel Port Mode and ECP DMA Select configurations are not available. Configuration options: [Disabled] [378H/IRQ7] [278H/IRQ5] ASUS PU-DLS/PU-DL motherboard user guide 4-19 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 78
PCI slot 1and PCI slot 2. Slots 3/4/5/6/7/8 map to PCIX1/2/3/4, with PCIX4 serving riser slots A/B/C. Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15] 4-20 Chapter 4: BIOS Setup - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 79
] ONB Intel 82544 LAN Boot ROM [Disabled] ONB Intel 82540 LAN Boot ROM [Disabled] When set to [Enabled], these fields allow the system to boot from the network using the onboard LAN controller boot ROM. Configuration options: [Disabled] [Enabled] ASUS PU-DLS/PU-DL motherboard user guide 4-21 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 80
to [Yes] if you install a legacy ISA card that requires a unique IRQ and you are NOT using ICU. Configuration options: [No/ICU] [Yes] 4-22 Chapter 4: BIOS Setup - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 81
Max Saving] You should install the Advanced Power Management (APM) utility to keep the system time updated even when the computer enters suspend mode. In Windows 3.x and Windows 95, you need to "Advanced" in the Power Management Properties dialog box. ASUS PU-DLS/PU-DL motherboard user guide 4-23 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 82
Power Management System (DPMS) feature allows the BIOS to control the video display card if it supports the DPMS feature. [Blank Screen] only blanks field. This feature does not affect SCSI hard drives attached on a PU-DLS motherboard. Configuration options: [Disabled] [1 Min] [2 Min] [3 Min]...[15 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 83
a PCI LAN or modem card. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled] ASUS PU-DLS/PU-DL motherboard user guide 4-25 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 84
time of the day by selecting [Everyday] or at a certain time and day by selecting [By Date]. Configuration options: [Disabled] [Everyday] [By Date] 4-26 Chapter 4: BIOS Setup - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 85
[xxxC/xxxF] CPU1 Temperature [xxxC/xxxF] The onboard hardware monitor is able to detect the MB (motherboard) and CPU temperatures. Set to [Ignore] only if necessary. CPU0 Fan Speed [xxxxRPM] CPU1 Fan to "Press F1 to continue or DEL to enter SETUP". ASUS PU-DLS/PU-DL motherboard user guide 4-27 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 86
4.6 Boot Menu The motherboard BIOS supports the BIOS Boot Specification (BBS) version 1.01. BBS BIOS. The BCV devices present in the system will appear as options for this field. The field shows [None] if no BCV device is installed. Boot Connection Vector devices are supported only on PU-DLS - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 87
to configure the PCI bus slots instead of using the BIOS. When [Yes] is selected, interrupts may be Support [Enabled] This field allows you to enable or disable the MultiProcessor Specification 1.4 support. Configuration options: [Disabled] [Enabled] ASUS PU-DLS/PU-DL motherboard user guide - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 88
40 or 80 tracks. Configuration options: [Disabled] [Enabled] 4.7 Server Menu Remote Console [Disabled] This field allows the text mode VGA display to be sent out to VT100 terminal through COM1. This function is effective at BIOS POST and DOS environment. Configuration options: [Disabled] [Enabled - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 89
the values you selected are saved to the CMOS RAM. The CMOS RAM is sustained by an onboard backup battery and stays on even when the PC is turned off. When you select this option time, and password, the BIOS asks for a confirmation before exiting. ASUS PU-DLS/PU-DL motherboard user guide 4-31 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 90
. Select Exit Saving Changes or make other changes before saving the values to the non-volatile RAM. Discard Changes This option allows you to discard the selections you made and restore the previously appears. Select [Yes] to save any changes to the non-volatile RAM. 4-32 Chapter 4: BIOS Setup - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 91
Chapter 5 This chapter tells how to install SCSI, LAN, and VGA drivers for various operating systems. Driver installation - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 92
Chapter summary 5.1 Support CD contents 5-1 5.2 Microsoft Windows NT Server 4.0 5-3 5.3 Microsoft Windows 2000 Server 5-12 5.4 Microsoft Windows XP Professional .......... 5-22 5.5 Novell NetWare Server 5-31 5.6 SCO Open Server 5.0.6 5-39 5.7 Linux RedHat 8.0 5-41 ASUS PU-DLS/PU-DL motherboard - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 93
the installation wizards or find additional instructions as text files in each of the driver folders. The Adaptec SCSI Driver appears only on PU-DLS models. 5.1.2 Management Sofware This screen displays the ASUS proprietary server management software. ASUS PU-DLS/PU-DL motherboard user guide 5-1 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 94
5.1.3 Utilities This screen displays the available system utilities that you can install. 5.1.4 Contact This screen displays the ASUS worldwide contact information. 5-2 Chapter 5: Driver installation - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 95
. Manually 1. Insert a blank formatted high-density floppy disk into the floppy drive. 2. Place the support CD into the CD-ROM drive. 3. Click on the CD icon near the top right corner of the menu to display the folders and sub-folders in the support CD. ASUS PU-DLS/PU-DL motherboard user guide 5-3 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 96
Microsoft® Windows® NT Server 4.0 (continued) 4. Copy the entire winnt40 folder and the txtsetup.oem file from the support CD into the root directory of the floppy disk. These items are in the following folder path: \drivers\adaptec\7902\ B. Installing Windows NT 4.0 with an Ultra320 SCSI Controller - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 97
Start Windows NT 4.0 and install the driver from the Adaptec Ultra320 driver disk. 3. Shut down Windows NT 4.0 and turn off your system. 4. Switch the bootable hard drive from the old SCSI controller to the Ultra320 controller. 5. Power on your system. ASUS PU-DLS/PU-DL motherboard user guide 5-5 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 98
Microsoft® Windows® NT Server 4.0 (continued) 5.2.2 Intel® 82544GC/82540EM LAN driver installation It is recommended that you use the Intel 82544GC/82540EM LAN drivers from the support CD. A. Preparing the Intel 82544GC/82540EM LAN driver disk Prepare one blank formatted high density floppy disk - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 99
5. Follow the succeeding installation instructions. 6. When done, the following screen appears. Click Finish to complete the installation. ASUS PU-DLS/PU-DL motherboard user guide 5-7 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 100
Microsoft® Windows® NT Server 4.0 (continued) B. New System Installation 1. When the Installing Windows NT Networking screen appears, press Next to display the . 3. On the screen that appears, click the button Select from list... to dispaly the following. 5-8 Chapter 5: Driver installation - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 101
Adapter, then click OK. Follow the succeeding screen instructions. 7. When done, the following screen appears showing the Intel(R) PRO/1000 Family Adapter in the list. 8. Click Next and follow any other screen instructions to complete the installation. ASUS PU-DLS/PU-DL motherboard user guide 5-9 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 102
select an adapter from the list. Instead, insert the LAN driver disk that you created from the Support CD. Refer to the section "A. Preparing the Intel 82544GC/82540EM LAN Driver Disk" if you have not yet created the LAN driver disk. 5. Follow steps 4 to 8 in section "B. New System Installation" to - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 103
following screen appears. Click on ATI Rage XL Display Driver to install the driver. If Autorun is disabled, install the display driver from the following path: \Drivers\Ati\Nt40\Setup.exe 3. Follow the screen instructions to complete the installation. ASUS PU-DLS/PU-DL motherboard user guide 5-11 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 104
for the SCSI controller. You must load the driver manually prior to Windows 2000 installation. The Adaptec® SCSI Driver appears only on PU-DLS models. A. Preparing an Adaptec Ultra320 FMS driver disk A1. Using the Drivers menu in the support CD 1. Insert a blank formatted high density floppy disk - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 105
Bootable CD-ROM support is enabled. This is done through the System BIOS Setup Utility. 2. driver disk in your disk drive and enter the following path, then click OK. \win2000 5. Select the Adaptec Ultra320 driver from the list, then click the Next button. ASUS PU-DLS/PU-DL motherboard user guide - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 106
Microsoft® Windows® 2000 Server (continued) 6. Click the Next button again to confirm the installation of the driver. You may be to restart the computer. Select Yes. D. Updating the Adaptec Ultra320 driver under Windows 2000 Follow these instructions only if Windows 2000 is already installed. 1. - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 107
operating system. Install the driver for the Adaptec Ultra320 Adapter. 3. Shut down Windows 2000. Turn off your system if necessary. 4. Switch the bootable hard drive from the old SCSI controller to the Ultra320 controller and boot up your computer. ASUS PU-DLS/PU-DL motherboard user guide 5-15 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 108
Microsoft® Windows® 2000 Server (continued) 5.3.2 Intel® 82544GC/82540EM LAN driver installation It is recommended that you use the Intel 82544GC/82540EM LAN drivers from the support CD. A. Preparing the Intel 82544GC/82540EM LAN driver disk Prepare one blank formatted high density floppy disk - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 109
5. Follow the succeeding installation instructions. 6. When done, the following screen appears. Click Finish to complete the installation. ASUS PU-DLS/PU-DL motherboard user guide 5-17 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 110
You may update the LAN driver directly from the support CD. 1. Insert the support CD into the CD-ROM drive. On the screen that appears, click on Intel PRO/1000 LAN Driver, then on the item Install Base Driver Only. 2. Follow the screen instructions to complete the driver update. When done - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 111
the Intel(R) 82554GC-based Network Connection, click the right mouse button, and select Properties to display the following. 4. Highlight the Intel(R) PRO-1000 Server Adapter, click the right mouse button, and select Properties to display the following. ASUS PU-DLS/PU-DL motherboard user guide - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 112
® Windows® 2000 Server (continued) C. Updating the LAN driver using the LAN driver disk You may also update the LAN drivers from the LAN Driver Disk if you created one in section "A. Preparing the Intel 82544GC/82540EM LAN Driver Disk." Follow these steps to update from the LAN driver disk. 1. Boot - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 113
You do not need to load any driver for supporting the onboard ATI RAGE XL graphics controller chipset. 5.3.4 Enabling ATA100 Feature in Windows® 2000 To enable the ATA100 feature under Windows 2000, you need to upgrade to Windows 2000 Service Pack 2. ASUS PU-DLS/PU-DL motherboard user guide 5-21 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 114
for the SCSI controller. You must load the driver manually prior to Windows XP installation. The Adaptec® SCSI Driver appears only on PU-DLS models. A. Preparing an Adaptec Ultra320 FMS driver disk A1. Using the Drivers menu in the support CD 1. Insert a blank formatted high density floppy disk - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 115
CD-ROM, make sure Bootable CD-ROM support is enabled. This is done through the System BIOS Setup Utility. 2. Press F6 when this and then continue. 5. The screen displays the adapter drivers supported on the disk. Select Adaptec Ultra320 SCSI Cards ( ASUS PU-DLS/PU-DL motherboard user guide 5-23 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 116
A, and then continue. 5. The screen displays the adapter drivers supported on the disk. Select Adaptec Ultra320 SCSI Cards (WinXP IA64 finish setting up the operating system. D. Updating the Adaptec Ultra320 driver under Windows XP Follow these instructions only if Windows XP is already installed - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 117
screen that appears, select Create Install Disk. 3. The next screen allows you to select an operating system to install the driver. Select Windows XP. 4. Select A:/ for the destination drive, then click on Create Disk. (See picture on the next page.) ASUS PU-DLS/PU-DL motherboard user guide 5-25 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 118
Microsoft® Windows® XP Professional (continued) 5. Follow the succeeding installation instructions. 6. When done, the following screen appears. Click Finish to complete the installation. 5-26 Chapter 5: Driver installation - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 119
. On the screen that appears, click on Intel PRO/1000 LAN Driver, then on the item Install Base Driver Only. 2. Follow the screen instructions to complete the driver update. When done, your Computer Management window shows the installed LAN adapters. ASUS PU-DLS/PU-DL motherboard user guide 5-27 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 120
the Intel(R) 82554GC-based Network Connection, click the right mouse button, and select Properties to display the following. 4. Highlight the Intel(R) PRO-1000 Server Adapter, click the right mouse button, and select Properties to display the following. 5-28 Chapter 5: Driver installation - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 121
Select Display a list of the known drivers for this device ... 8. Select Network adapters under Hardware Type, and click Next. 9. Click Have Disk..., then insert the LAN driver disk. 10. Follow the succeeding instructions to complete the installation. ASUS PU-DLS/PU-DL motherboard user guide 5-29 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 122
(continued) 5.4.3 ATI® Rage XL Display Driver Installation Windows XP system can automatically recognize the ATI RAGE XL PCI driver during system installation. You do not need to load any driver for supporting the onboard ATI RAGE XL graphics controller chipset. 5-30 Chapter 5: Driver installation - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 123
unlisted driver. 6. Insert the Adaptec Ultra320 FMS Driver disk for NetWare into the floppy drive. 7. Press F3 and specify the path to the ADPU320.HAM driver. For NetWare 5.1 and 6.0, select: A:\NETWARE\V51_V60\ For NetWare 5.0, select: A:\NETWARE\V42_V50\ ASUS PU-DLS/PU-DL motherboard user guide - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 124
an Ultra320 SCSI Controller 1. Begin installation of NetWare on your server as instructed in your NetWare documentation. 2. When the screen "Choose the Server Drivers - Summary" appears, select "Select additional or modify selected Disk/LAN drivers" and press ENTER. 3. Highlight "Disk and CD-ROM - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 125
. 13. Choose "Select/Modify driver parameters" and press ENTER. 14. Press Alt-Esc to switch to System Console, and at the prompt, type: LOAD A:\NETWARE\V51_V60\ADPU320.HAM (for NetWare 5.1/6.0) or LOAD A:\NETWARE\V42_V50\ADPU320.HAM (for NetWare 5.0) ASUS PU-DLS/PU-DL motherboard user guide 5-33 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 126
Novell® Netware® Server (continued) 15. Write down the HIN value displayed on the the path to the ADPU320.HAM driver: A:\NETWARE\V42_V50\ 8. Select ADPU320.HAM and press ENTER. 9. When prompted, click 'Yes' to copy the driver. 10. Specify the path where the driver ADPU320.HAM should be installed, or - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 127
3. Select "Edit STARTUP.NCF file". 4. Remove the line(s) for loading ADPU320.HAM driver. 5. When finished, press F10 to save and exit. 6. Press ESC twice to quit NWCONFIG utility. NOTE A DOS text editor can also be used to modify the STARTUP.NCF file. ASUS PU-DLS/PU-DL motherboard user guide 5-35 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 128
Novell® Netware® Server (continued) 5.5.2 Intel® 82544GC/82540EM LAN driver installation It is recommended that you use the Intel 82544GC/82540EM LAN drivers from the support CD. A. Preparing the Intel 82544GC/82540EM LAN driver disk Prepare one blank formatted high density floppy disk before - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 129
5. Follow the succeeding installation instructions. 6. When done, the following screen appears. Click Finish to complete the installation. ASUS PU-DLS/PU-DL motherboard user guide 5-37 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 130
5.x/6.0 Installations 1. Prepare the Intel(R) PRO/1000 Server Adapter driver from the previous section. 2. Install NetWare 4.2 according to the NetWare instructions. 3. When the NetWare installation procedure prompts you for a Network Driver, insert the Intel PRO/1000 driver disk into drive A: Then - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 131
the network driver for the onboard LAN device. User also can find the Intel 82544GC/82540EM Network driver from the support CD at: \Drivers\Lan\openunix\ A. Installing the eeE Driver for SCO OpenServer .At the command prompt, type: # reboot (or init 6) ASUS PU-DLS/PU-DL motherboard user guide 5-39 - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 132
SCO Open Server 5.0.6 (continued) 5.6.2 ATI® Rage XL Display Driver Installation SCO OpenServer 5.0.6 system can correctly recognize ATI Rage XL graphic controller (ATI RAGE PRO/LT-PRO/XL/Mobility (P/M/M1)) during installation. User doesn't need to load or modify the video driver for the onboard VGA - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 133
the driver. For questions related to hardware requirements, refer to the documentation supplied with your Intel PRO/1000 adapter. All hardware requirements listed apply to use with Linux. New features include support for the Intel PRO/1000 desktop adapter. ASUS PU-DLS/PU-DL motherboard user guide - Asus PU-DL | Manual pdf format file for PU-DLS/PU-DL M/B - Page 134
Updating Driver on an Existing System Installation To build a binary RPM* package of this driver, run 'rpm -tb ' Replace with the specific file name of the driver. 1. Move the base driver now. 5.7.3 ATI® Rage XL Display Driver Installation The RedHat 8.0 system can
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
 |
 |
Motherboard
PU-DLS
PU-DL
User Guide