Asus ProArt Z490-CREATOR 10G Users Manual English
Asus ProArt Z490-CREATOR 10G Manual
 |
View all Asus ProArt Z490-CREATOR 10G manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus ProArt Z490-CREATOR 10G manual content summary:
- Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 1
Motherboard ProArt Z490CREATOR 10G - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 2
service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL https://www.asus.com/support/ or (2) problems - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 3
information...iv About this guide...v ProArt Z490-CREATOR 10G specifications summary vi Connectors with shared bandwidth xi Package contents...xiii Installation tools and components xiv Chapter 1: Product Introduction 1.1 Before you proceed 1-1 1.2 Motherboard layout 1-2 Chapter 2: Basic - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 4
service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals If you encounter technical problems with the product, contact a qualified service technician or your retailer. • Your motherboard should only be used - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 5
you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 6
ProArt Z490-CREATOR 10G specifications summary CPU Chipset Memory Graphics Expansion Slots Multi-GPU support Intel® Socket LGA 1200 for 10th Gen Intel® Core™, Pentium® Gold and Celeron® processors* Supports Intel® 14 nm CPU Supports Intel® Turbo Boost Technology 2.0 and Turbo Boost Max Technology - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 7
ProArt Z490-CREATOR 10G specifications summary Storage Ethernet USB Audio Total supports 2 x M.2 slots and 6 x SATA 6Gb/s ports Intel® Z490 Chipset M.2_1 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 3.0 x4 & SATA modes)* M.2_2 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 3.0 x4 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 8
ProArt Z490-CREATOR 10G specifications summary Back Panel I/O Ports Internal I/O connectors 2 x Thunderbolt™ 3 USB Type-C® ports 2 x USB 3.2 Gen 1 ports (2 x Type-A) 4 x USB 3.2 Gen 2 ports (4 x Type-A) 2 x DisplayPort IN ports for Thunderbolt™ 3* 1 x HDMI™ port 1 x Intel® I225-V Ethernet port 5 x - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 9
ProArt Z490-CREATOR 10G specifications summary Special Features Software Features Extreme Engine Digi+ - 5K Black Metallic Capacitors - ON-semi NCP302045 ASUS 5X PROTECTION III - ASUS DIGI+ VRM (- Digital power design with Dr. MOS) - ASUS Enhanced DRAM Overcurrent Protection - ASUS ESD Guards - - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 10
ProArt Z490-CREATOR 10G specifications summary Software Features BIOS Manageability Operating System Form Factor UEFI BIOS AI Overclocking Guide ASUS EZ DIY - ASUS CrashFree BIOS 3 - ASUS EZ Flash 3 - ASUS UEFI BIOS EZ Mode FlexKey 192 (128+64) Mb Flash ROM, UEFI AMI BIOS WOL by PME, PXE Windows® - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 11
Connectors with shared bandwidth D A B A D Configuration PCIEX16_1 A PCIEX16_2 Configuration M.2_1 B SATA_2 Configuration M.2_2 C SATA_56 Configuration PCIEX16_3 D Thunderbolt™ 3 B C C 1 2 x16 x8 - x8 1 2 x4 SATA mode V - 1 2 x2 x4 V - 1 2 x4 - - V xi - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 12
• When M.2_1 is operating in SATA mode, SATA6G_2 will be disabled. • M.2_2 runs at PCIe 3.0 x2 by default and shares bandwidth with SATA6G_56. When M.2_2 runs at PCIe 3.0 x4 or is populated by H10, SATA6G_56 will be disabled. • PCIEX16_3 shares bandwidth with Thunderbolt™ 3. Thunderbolt™ 3 will be - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 13
Miscellaneous Installation Media Documentation 1 x ProArt Z490-CREATOR 10G motherboard 4 x SATA 6Gb/s cables 1 x DP to DP cable for Thunderbolt™ 3 1 x I/O Shield 1 x M.2 Rubber Package 1 x M.2 SSD screw package 1 x Fan bracket 1 x HYPER 10G LAN Card 1 x Support DVD 1 x User manual If any of the - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 14
supply unit Intel® LGA 1200 CPU Intel® LGA 1200 compatible CPU Fan DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) M.2 SSD module (optional) 1 Bag of screws The tools and components in the table above are not included in the motherboard package - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 15
bag that came with the component. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. ProArt Z490-CREATOR 10G 1-1 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 16
1.2 Motherboard layout Chapter 1 1-2 Chapter 1: Product Introduction - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 17
header 19. Q-LEDs 20. 8-pin Power Plug LED Page 1-4 1-5 1-7 1-9 1-10 1-11 1-12 1-13 1-14 1-15 1-16 1-17 1-18 1-19 1-19 1-20 1-21 1-22 1-23 1-23 ProArt Z490-CREATOR 10G 1-3 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 18
the damage is shipment/ transit-related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1200 socket. • The product warranty does not cover damage to the socket contacts resulting - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 19
Chapter 1 2. DIMM slots The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4 (Double Data Rate 4) memory modules. A DDR4 DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. Recommended memory configurations ProArt Z490-CREATOR 10G 1-5 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 20
vendor-marked value. • For system stability, use a more efficient memory cooling system to support a full memory load or overclocking condition. • Always install the DIMMS with the same get the correct memory modules. • Visit the ASUS website for the latest QVL. 1-6 Chapter 1: Product Introduction - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 21
slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Chapter 1 Please refer to the following tables for the recommended VGA configuration and Hyper M.2 configuration. ProArt Z490-CREATOR 10G 1-7 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 22
x8. • When using up to 3 intel® SSD on CPU support, PCIe 3.0 x16_2 will be disabled. If you wish to connect a display, we suggest using the internal VGA, or installing a VGA card to PCIe x16_3, which will run at x4. • Enable the Hyper M.2 X16 series card under BIOS settings. 1-8 Chapter 1: Product - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 23
connect the fan cables to the fan headers. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan headers! • Ensure the Q-Fan Controlled Q-Fan Controlled Full-Speed Shared Control A A - ProArt Z490-CREATOR 10G 1-9 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 24
These Power connectors allow you to connect your motherboard to a power supply. The power supply plugs a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a minimum power of 350 W. • We recommend - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 25
M design and type 2242 / 2260/ 2280 / 22110 storage devices. • M.2_2 slot supports PCIe 3.0 x4 mode Key M design and type 2242 / 2260 / 2280 / 22110 be disabled. • M.2 slots supports IRST (Intel® Rapid Storage Technology). The M.2 SSD module is purchased separately. ProArt Z490-CREATOR 10G 1-11 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 26
Intel® Z490 chipset. • The slots are set to [AHCI] by default. If you intend to create a SATA RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST Premium with Intel Guide. You can download the RAID Configuration Guide from the ASUS website. 1-12 Chapter 1: - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 27
1 connector provides data transfer speeds of up to 5 Gb/s. • The USB 3.2 Gen 1 module is purchased separately. • For the list of compatible devices, please visit the ASUS website for the latest QVL. ProArt Z490-CREATOR 10G 1-13 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 28
Chapter 1 9. USB 3.2 Gen 1 header The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1 header provides data transfer speeds of up to 5 Gb/s. The USB 3.2 Gen 1 module is purchased separately. 1-14 Chapter 1: Product - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 29
provides data transfer speeds of up to 480 MB/s connection speed. DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. ProArt Z490-CREATOR 10G 1-15 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 30
or WS2812B based LED strips. Chapter 1 The Addressable Gen2 header supports WS2812B addressable RGB LED strips (5V/ Data/Ground), with from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • Actual lighting and color will vary with LED - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 31
you to connect RGB LED strips. Chapter 1 The AURA RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating the motherboard. • The LED strip will only light up when the system is powered on. • The LED strip is purchased separately. ProArt Z490-CREATOR 10G 1-17 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 32
cap for about 5-10 seconds. 3. Plug the power cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS setup to re-enter data. DO NOT short-circuit the pins except when clearing the RTC RAM. Short-circuiting or placing a jumper cap will cause - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 33
type of the installed CPU). Set to pins 2-3 to increase the CPU voltage setting, or set to pins 1-2 to use the default CPU voltage setting. ProArt Z490-CREATOR 10G 1-19 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 34
Chapter 1 16. Front Panel Audio header The front panel audio header is for a chassis-mounted front panel audio I/O module that supports HD Audio. Connect one end of the front panel audio I/O module cable to this header. We recommend that you connect a high-definition front panel audio - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 35
Panel header The System Panel header supports several chassis-mounted functions. Chapter default. You can assign a different function to this header in the BIOS settings. • Chassis intrusion connector (CHASSIS) The 2-pin connector allows you chassis intrusion event. ProArt Z490-CREATOR 10G 1-21 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 36
you to connect a sensor to monitor the temperature of the devices and the critical components inside the motherboard. Connect the thermal sensor and place it on the device or the motherboard's component to detect its temperature. The thermal sensor is purchased separately. 1-22 Chapter 1: Product - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 37
solved. The Q-LEDs provide the most probable cause of an error code as a starting point for troubleshooting. The actual cause may vary from case to case. 20. 8-pin Power Plug LED The 8-pin Power Plug LED lights up to indicate that the 8-pin power plug is not connected. ProArt Z490-CREATOR 10G 1-23 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 38
Chapter 1 1-24 Chapter 1: Product Introduction - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 39
are for reference only. The motherboard layout may vary with models, but LGA1200 socket. • ASUS will not cover damages resulting from incorrect CPU installation/removal, incorrect CPU orientation/placement, or other damages resulting from negligence by the user. Chapter 2 ProArt Z490-CREATOR 10G - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 40
Chapter 2 2-2 Chapter 2: Basic Installation - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 41
2.1.2 Cooling system installation Apply Thermal Interface Material to the CPU cooling system and CPU before you install the cooling system, if necessary. To install a CPU heatsink and fan assembly Chapter 2 ProArt Z490-CREATOR 10G 2-3 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 42
To install an AIO cooler If you wish to install an AIO cooler, we recommend installing the AIO cooler after installing the motherboard into the chassis. Chapter 2 AIO_PUMP CPU_FAN CPU_OPT 2-4 Chapter 2: Basic Installation - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 43
2.1.3 DIMM installation Chapter 2 To remove a DIMM ProArt Z490-CREATOR 10G 2-5 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 44
Chapter 2 2.1.4 M.2 installation 1 2 1 OPTIONAL 3 • The M.2 rubber pad is optional for when installing a single sided M.2 storage device. Ensure to install the bundled M.2 rubber pad before installing your single sided M.2 storage device. • DO NOT install the bundled M.2 rubber pads when - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 45
Chapter 2 4 5 4 8 7 8 6 The M.2 is purchased separately. ProArt Z490-CREATOR 10G 2-7 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 46
2.1.5 Fan bracket installation Chapter 2 When using high performance settings whilst overclocking, ensure to install the fan holder for additional fan(s). • You may install 12V (1A, 12W), 40mm x 40mm fans or 50mm x 50mm fans. • Ensure to the use the bundled screws that came with your fans. • Fans - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 47
chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. 2. Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT over tighten the screws! Doing so can damage the motherboard. ProArt Z490-CREATOR 10G 2-9 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 48
2.1.7 ATX power connection Chapter 2 Ensure to connect the 8-pin power plug. 2.1.8 SATA device connection OR 2-10 Chapter 2: Basic Installation - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 49
connector until it clicks into place. To install USB 3.2 Gen 1 connector To install USB 2.0 connector USB 3.2 Gen 1 To install front panel audio connector USB 2.0 AAFP ProArt Z490-CREATOR 10G 2-11 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 50
2.1.10 Expansion card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2 2-12 Chapter 2: Basic Installation - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 51
To install the HYPER 10G LAN card Chapter 2 ProArt Z490-CREATOR 10G 2-13 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 52
available using the DP IN and Thunderbolt™ 3 USB Type-C® ports. 1. Connect the bundled ASUS DisplayPort cable to the DisplayPort on a discrete graphic card and to the DisplayPort IN port on the motherboard. Refer to section Rear I/O connection for the location of the DisplayPort IN port - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 53
the DisplayPort IN 1, DisplayPort IN 2, USB Type-C® 1, and USB Type-C® 2 ports when your motherboard is powered on. If you have a CPU with integrated graphics and wish to only use a Type-C® 1 and USB V Type-C® 2 output standards depend on the external graphics card ProArt Z490-CREATOR 10G 2-15 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 54
Type-C® output (Using a CPU without integrated graphics) USB Type-C® 1 output USB Type-C® 2 output Details DP-IN 1 no input A - DP-IN 2 no input - Not supported DP-IN 1 no input B - DP-IN 2 with input DP-IN 1 with input C V DP-IN 2 no input DP-IN 1 with input D V DP-IN 2 with - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 55
USB Type-C® 1 output USB Type-C® 2 output Details DP-IN 1 no input A - DP-IN 2 no input - Not supported DP-IN 1 no input B - DP-IN 2 with input DP-IN 1 with input C V DP-IN 2 no input V Type-C® 2 output standards depend on the external graphics card ProArt Z490-CREATOR 10G 2-17 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 56
using configuration C when you are using 1 output. USB Type-C® 1 output USB Type-C® 2 output Details DP-IN 1 no input A - DP-IN 2 no input - Not supported DP-IN 1 no input B - DP-IN 2 with input DP-IN 1 with input C V DP-IN 2 no input DP-IN 1 with input D V DP-IN 2 with - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 57
ports for faster and better performance for your devices. • Due to the design of the Intel chipset, all USB devices connected to the USB 3.2 Gen 1 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. ProArt Z490-CREATOR 10G 2-19 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 58
Chapter 2 * Audio 2, 4, 5.1 or 7.1-channel configuration Port Light Blue Lime Pink Orange Headset 2-channel Line In Line Out Mic In - 4-channel Line In Front Speaker Out Mic In - 5.1-channel Line In Front Speaker Out Mic In Center/Sub woofer 7.1-channel Side Speaker Out Front Speaker Out Mic - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 59
Connect to 2-channel Speakers Connect to 4-channel Speakers Connect to 5.1-channel Speakers Chapter 2 ProArt Z490-CREATOR 10G 2-21 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 60
Connect to 7.1-channel Speakers Chapter 2 2-22 Chapter 2: Basic Installation - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 61
is ON, press the power button for less than four seconds to put the system on sleep mode or soft-off mode, depending on the BIOS setting. Press the power button for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. ProArt Z490-CREATOR 10G 2-23 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 62
Chapter 2 2-24 Chapter 2: Basic Installation - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 63
may vary due to different BIOS release versions. Please refer to the latest BIOS version for settings and options. For more information on BIOS configurations, please refer to https://www.asus.com/support, or download the BIOS manual by scanning the QR code. Chapter 3 ProArt Z490-CREATOR 10G 3-1 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 64
. 3.3 EZ Update The EZ Update is a utility that allows you to update the motherboard BIOS in Windows® environment. • EZ Update requires an Internet connection either through a network or an ISP (Internet Service Provider). • This utility is available in the support USB drive that comes with the - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 65
the latest BIOS, and then press . 5. Press to switch to the Folder field. 6. Press the Up/Down arrow keys to find the BIOS file, and then press to perform the BIOS update process. Reboot the system when the update process is done. Chapter 3 ProArt Z490-CREATOR 10G 3-3 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 66
during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 67
motherboard comes with the Intel® Rapid Storage Technology that supports RAID 0, RAID 1, RAID 5 and RAID 10 configuration. For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support ProArt Z490-CREATOR 10G 3-5 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 68
Chapter 3 3-6 Chapter 3: BIOS Setup - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 69
Information Responsible Party: Asus Computer International Address: that may cause undesired operation. This equipment has been tested and found to comply with the limits for a installed and used in accordance with the instructions, may cause harmful interference to radio ProArt Z490-CREATOR 10G A-1 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 70
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 71
23, 2011,meet the requirements of the Vietnam Circular 30/2011/TT-BCT. Các sản phẩm ASUS bán tại Việt Nam, vào ngày 23 tháng 9 năm2011 trở về sau, đều phải đáp ứng các yêu cầu của Thông tư 30/2011/TT-BCT của Việt Nam. Turkey RoHS AEEE Yönetmeliğine Uygundur Appendix ProArt Z490-CREATOR 10G A-3 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 72
Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. DO NOT throw the motherboard in municipal waste. This product has been - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 73
bulunabilir: www.asus.com/support Bosanski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj usklađen sa bitnim zahtjevima i ostalim odgovarajućim odredbama vezanih direktiva. Cijeli tekst EU izjave o usklađenosti dostupan je na: www.asus.com/support Appendix ProArt Z490-CREATOR 10G A-5 - Asus ProArt Z490-CREATOR 10G | Users Manual English - Page 74
Harkortstrasse 21-23, 40880 Ratingen, Germany Web site https://www.asus.com/de Online contact https://www.asus.com/support/Product/ContactUs/ Services/questionform/?lang=de-de Technical Support Telephone (DE) Telephone (AT) Online support +49-2102-5789557 +43-1360-2775461 https://www
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
 |
 |
Motherboard
ProArt
Z490-
CREATOR
10G