Asus RAMPAGE IV GENE User Manual

Asus RAMPAGE IV GENE Manual

Get Asus RAMPAGE IV GENE PDF manuals and user guides View all Asus RAMPAGE IV GENE manuals
Add to My Manuals
Save this manual to your list of manuals

Asus RAMPAGE IV GENE manual content summary:

  • Asus RAMPAGE IV GENE | User Manual - Page 1
    Motherboard RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 2
    INC. ("ASUS"). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS
  • Asus RAMPAGE IV GENE | User Manual - Page 3
    tools and components to build a PC system 2-32 2.3.2 CPU installation 2-33 2.3.3 CPU heatsink and fan assembly installation 2-35 2.3.4 DIMM installation 2-37 2.3.5 Motherboard installation 2-38 2.3.6 ATX Power connection 2-40 2.3.7 SATA device connection 2-41 2.3.8 Front I/O Connector
  • Asus RAMPAGE IV GENE | User Manual - Page 4
    3 utility 3-46 3.10.4 ASUS BIOS Updater 3-47 3.10.5 USB BIOS Flashback 3-50 4.1 Installing an operating system 4-1 4.2 Support DVD information 4-1 4.2.1 Running the support DVD 4-1 Chapter 4: Software support 4.2.2 Obtaining the software manuals 4-2 4.3 Software information 4-3 iv
  • Asus RAMPAGE IV GENE | User Manual - Page 5
    4.3.4 EPU 4-11 4.3.5 FAN Xpert 4-12 4.3.6 Sensor Recorder 4-13 4.3.7 Probe II 4-14 4.3.8 USB 3.0 Boost 4-18 4.3.9 Ai Charger 4-19 4.3.10 ASUS Update 4-20 4.3.11 MyLogo2 4-21 4.3.12 ROG Connect 4-23 4.3.13 Audio configurations 4-26 4.3.14 Sound Blaster X-Fi MB 2 4-27 4.4 RAID
  • Asus RAMPAGE IV GENE | User Manual - Page 6
    and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance. RF exposure warning This
  • Asus RAMPAGE IV GENE | User Manual - Page 7
    the requirements of the EEC directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC "Low voltage directive". CE marking for devices with wireless LAN/ Bluetooth This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March
  • Asus RAMPAGE IV GENE | User Manual - Page 8
    with maximum authorized power of 100mW in the 2446.5-2483.5 MHz band. Use outdoors on public property is not permitted. In the departments listed below, for the entire 2.4 GHz band: • Maximum authorized power indoors is 100mW • Maximum authorized power outdoors is 10mW Departments in which the use
  • Asus RAMPAGE IV GENE | User Manual - Page 9
    , including interference that may cause undesired operation of the device. To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit
  • Asus RAMPAGE IV GENE | User Manual - Page 10
    the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that a qualified service technician or your retailer. • The optical S/PDIF is an optional component (may or may not be included in your motherboard) and is RELATED INSTRUCTIONS. 
  • Asus RAMPAGE IV GENE | User Manual - Page 11
    framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
  • Asus RAMPAGE IV GENE | User Manual - Page 12
    This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system
  • Asus RAMPAGE IV GENE | User Manual - Page 13
    of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete
  • Asus RAMPAGE IV GENE | User Manual - Page 14
    RAMPAGE IV GENE specifications summary CPU Chipset Memory Expansion Slots Multi-GPU Technology Storage LAN Audio Intel® Core™ i7 processor family for the LGA 2011 Socket Supports Intel® Turbo Boost Technology 2.0 * Refer to www.asus.com for Intel CPU support list Intel® X79 Express Chipset Quad
  • Asus RAMPAGE IV GENE | User Manual - Page 15
    RAMPAGE IV GENE specifications summary USB ROG Exclusive Overclocking Features 2 x USB 3.0 Controllers: - 4 x USB 3.0/2.0 ports (2 ports at mid-board, 2 ports at the back panel) Intel® X79 Chipset: - 12 x USB 2.0 ports (4 ports at mid-board, 8 ports at the back panel, and 1 reserved for ROG
  • Asus RAMPAGE IV GENE | User Manual - Page 16
    SATA 3Gb/s connectors (black) Debug LED 5 x Fan connectors: - 2 x CPU - 3 x Chassis 11 x Probelt measurement points 1 x SPDIF_out connector 1 x 24 pin ATX power connector 1 x 8-pin ATX 12V power connector 1 x Power on switch 1 x Reset switch 1 x Go button 1 x Audio front panel connector System panel
  • Asus RAMPAGE IV GENE | User Manual - Page 17
    RAMPAGE IV GENE specifications summary BIOS 64Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.0, WfM20, SM BIOS 2.5, ACPI2.0a Mutli-Language BIOS Manageability WfM2.0, DMI2.0, WOL by PME, WOR by PME, PXE Software Support DVD: Drivers and applications - ASUS AI Suite II - ROG CPU-Z - ROG GameFirst
  • Asus RAMPAGE IV GENE | User Manual - Page 18
    xviii
  • Asus RAMPAGE IV GENE | User Manual - Page 19
    ROG RAMPAGE IV GENE 1 x ROG connect cable 1 x 2-in-1 ASUS Q-Connector Kit 2 x 2-in-1 SATA 6Gb/s signal cables 1 x 2-in-1 SATA 3Gb/s signal cables 1 x SLI cable 1 x ROG theme label 1 x 12-in-1 ROG cable label 1 x I/O Shield ROG motherboard support DVD User guide ROG exclusive feature guide If
  • Asus RAMPAGE IV GENE | User Manual - Page 20
    PCIe speed depends on installed CPU type. SLI/CrossFire On-Demand Why choose when you can have both? SLI or CrossFireX? Fret no longer because with the ROG RAMPAGE IV GENE, you'll be able to run both multi-GPU setups. The board features SLI/CrossFireX on Demand technology, supporting up to Quad GPU
  • Asus RAMPAGE IV GENE | User Manual - Page 21
    ! Never want your graphics or DRAM card to get loose? Just enter the BIOS setting to find out. The action helps you to quickly detect the problem, fix it, and go overclocking. Remove your doubts, and have control over all components. Overclocking has never been this easy! ROG RAMPAGE IV GENE 1-3
  • Asus RAMPAGE IV GENE | User Manual - Page 22
    USB BIOS Flashback gives overclockers the ultimate convenience! CPU Level Up A simple click for an instant upgrade! Wishing that you could have a more expensive CPU? Upgrade your CPU at no additional cost with ROG's CPU Level Up! Simply pick the processor you wanted to overclock, and the motherboard
  • Asus RAMPAGE IV GENE | User Manual - Page 23
    timing adjustments, DRAM efficiency gauge When changing the DRAM settings in BIOS, it always takes time for the system to reboot. Worry no more! With Mem TweakIt, you can tune the DRAM in real-time, view your DRAM efficiency score, and upload and share your ranking online. ROG RAMPAGE IV GENE 1-5
  • Asus RAMPAGE IV GENE | User Manual - Page 24
    get enhanced scalability, faster data retrieval, and double the bandwidth of current bus systems. SATA on the Go The motherboard supports the next-generation hard drives based on the Serial ATA (SATA) 3Gb/s storage specification, delivering an enhanced scalability, and doubling the bus bandwidth for
  • Asus RAMPAGE IV GENE | User Manual - Page 25
    BIOS EZ Flash 2 is a user-friendly BIOS update utility. Simply launch this tool and update the BIOS from a USB flash disk before entering the BIOS. You can update your BIOS only in a few clicks without preparing an additional floppy diskette, or using an OS-based flash utility. ROG RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 26
    users and home offices. It is based on advanced antivirus technologies. The product incorporates the Kaspersky® Anti-Virus engine, which is renowned for malicious program detection rates that is among the industry's highest. ROG CPU-Z Whole new design of CPU-Z ROG CPU-Z is a customized ROG version
  • Asus RAMPAGE IV GENE | User Manual - Page 27
    the bag that came with the component. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. ROG RAMPAGE IV GENE 2-1
  • Asus RAMPAGE IV GENE | User Manual - Page 28
    2.2 Motherboard overview 2.2.1 Motherboard layout Chapter 2 Refer to 2.2.8 Internal connectors and 2.3.10 Rear panel connection for more information about rear panel connectors and internal connectors. 2-2 Chapter 2: Hardware information
  • Asus RAMPAGE IV GENE | User Manual - Page 29
    13. Go LED 14. Go Button 15. Reset switch 16. Power-on switch 17. Digital audio connector (4-1 pin SPDIF_OUT) 18. Front panel audio connector (10-1 pin AAFP) Page 2-28 2-5 2-29 2-4 2-17 2-29 2-25 2-23 2-22 2-24 2-29 2-26 2-16 2-14 2-13 2-13 2-27 2-31 Chapter 2 ROG RAMPAGE IV GENE 2-3
  • Asus RAMPAGE IV GENE | User Manual - Page 30
    Intel® 2nd Generation Core™ i7 Processor Extreme Edition. Chapter 2 Ensure that all power cables are unplugged before installing the CPU. • Upon purchase of the motherboard installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes
  • Asus RAMPAGE IV GENE | User Manual - Page 31
    memory The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations Chapter 2 ROG RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 32
    2133/1866/1600 MHz frequency as default. • According to Intel® spec, the max. 32GB memory capacity can be supported with DIMMs of 8GB (or above). ASUS will update QVL once the DIMMs are available on the market. • According to Intel CPU spec, DIMM voltage below 1.65V is recommended to protect the
  • Asus RAMPAGE IV GENE | User Manual - Page 33
    1.65 - 9-11-9-28 1.65 - - 1.5~1.7 DIMM socket support (Optional) 1 DIMM 4 DIMM • • • • • • RAMPAGE IV GENE Motherboard Qualified Vendors Lists (QVL) DDR3 2133 MHz capability Vendors Part No. Size SS/ DS Apacer CORSAIR CORSAIR CORSAIR G.SKILL G.SKILL GEIL KINGSTON KINGSTON KINGSTON
  • Asus RAMPAGE IV GENE | User Manual - Page 34
    65 • • • 1.65 • • • RAMPAGE IV GENE Motherboard Qualified Vendors Lists (QVL) DDR3 1800MHz capability Vendors G.SKILL Part No. Size SS/ Chip DS Brand F3-14400CL9D-4GBRL(XMP) 4GB(2x2GB) DS - Chip NO. Timing - 9-9-9-24 Voltage 1.6 DIMM socket support (Optional) 2 DIMM 3 DIMM 4 DIMM
  • Asus RAMPAGE IV GENE | User Manual - Page 35
    RAMPAGE IV GENE Motherboard Qualified Vendors Lists (QVL) DDR3 1600MHz capability Vendors Part No. Size SS/ DS A-DATA AM2U16BC2P1 2GB SS A-DATA AM2U16BC4P2 4GB DS A-DATA AX3U1600GC4G9(XMP) 4GB DS A-DATA AX3U1600PC4G8(XMP) 4GB DS CORSAIR HX3X12G1600C9(XMP) 12GB(6x2GB) DS CORSAIR
  • Asus RAMPAGE IV GENE | User Manual - Page 36
    RAMPAGE IV GENE Motherboard Qualified Vendors Lists (QVL) DDR3 1333MHz capability Vendor A-DATA CORSAIR G.SKILL KINGMAX KINGSTON MICRON SAMSUNG Elixir Patriot UMAX Part -15 - DS UMAX U2S24D30TP-13 - Voltage 1.5 1.5 1.5 - DIMM socket support 2DIMM 4DIMM • • • • • • • • • • • •
  • Asus RAMPAGE IV GENE | User Manual - Page 37
    x8 mode. • We recommend that you provide sufficient power when running CrossFireX™ or SLI mode. See page 2-30 for details. • Connect a chassis fan to the motherboard connector labeled CHA_FAN1/2/3 when using multiple graphics cards for better thermal environment. ROG RAMPAGE IV GENE 2-11
  • Asus RAMPAGE IV GENE | User Manual - Page 38
    IRQ assignments for this motherboard PCIE_X16_1 PCIE_X16_2 PCIE_X8_3 PCIE_X4 ASM USB3 #1 ASM USB3 #2 ASM SATA6 #1 Intel W82579 EHCI#0 EHCI#1 High Definition Audio SATA #0 SATA #0 A B C D E F G H shared - - - - - - - shared - - - - - - - shared - - - - - - - shared - -
  • Asus RAMPAGE IV GENE | User Manual - Page 39
    or opencase system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. Power-on switch Press the power-on switch to wake/power up the system. 2. Reset switch Press the reset switch to reboot the system. Chapter 2 ROG RAMPAGE IV GENE 2-13
  • Asus RAMPAGE IV GENE | User Manual - Page 40
    3. GO button Press the GO button before POST to enable MemOK! or press it to quickly load the preset profile (GO_Button file) for temporary overclocking when in OS. Chapter 2 2-14 Chapter 2: Hardware information
  • Asus RAMPAGE IV GENE | User Manual - Page 41
    disk LED is designed to indicate the hard disk activity. It blinks when data is being written into or read from the hard disk drive. The LED does not light up when there is no hard disk drive connected to the motherboard or when the hard disk drive does not function. Chapter 2 ROG RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 42
    in OS. 3. Q LED Q LEDs check key components (CPU, DRAM, VGA card, and booting devices) in sequence during motherboard booting process. If an error is found , the corresponding LED will continue lighting until the problem is solved. This user-friendly design provides an intuitional way to locate the
  • Asus RAMPAGE IV GENE | User Manual - Page 43
    in any motherboard component. The illustration below shows the location of the onboard power-on switch. 5. Debug LEDs The Debug LED design provides you the 2-digit display, allowing you to know the system status. Refer to the Debug table below for details. Chapter 2 ROG RAMPAGE IV GENE 2-17
  • Asus RAMPAGE IV GENE | User Manual - Page 44
    for future AMI SEC error codes Microcode not found Microcode not loaded PEI Core is started Pre-memory CPU initialization is started Pre-memory System Agent initialization is started Pre-memory PCH initialization is started OEM pre-memory initialization codes Memory initialization Reserved for ASL
  • Asus RAMPAGE IV GENE | User Manual - Page 45
    PCH Runtime Services CPU DXE initialization is started PCI host bridge initialization System Agent DXE initialization is started System Agent DXE SMM initialization is started System Agent DXE initialization (System Agent module specific) PCH DXE initialization is started ROG RAMPAGE IV GENE 2-19
  • Asus RAMPAGE IV GENE | User Manual - Page 46
    DXE codes OEM DXE initialization codes Boot Device Selection (BDS) phase is started Driver connecting Codes section below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System
  • Asus RAMPAGE IV GENE | User Manual - Page 47
    future AMI codes OEM BDS initialization codes CPU initialization error System Agent initialization error PCH initialization error Some of the Architectural Protocols are not available PCI resource allocation error. Out of Resources No Space for Legacy Option ROM No Console Output Devices are found
  • Asus RAMPAGE IV GENE | User Manual - Page 48
    , refer to section 4.4 RAID configurations or the manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial
  • Asus RAMPAGE IV GENE | User Manual - Page 49
    BIOS to [AHCI Mode]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions. ROG RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 50
    is not supported. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. • When using NCQ, set the ASM1061 Storage Controller item in the BIOS to [Enabled]. Refer to section 3.5.6 Onboard Devices Configuration for details. Chapter 2 2-24 Chapter
  • Asus RAMPAGE IV GENE | User Manual - Page 51
    the USB 3.0 specificaton that supports up to 4.8Gbps connection speed. If the USB 3.0 front panel cable is available from your system chassis, with this USB 3.0 connector, you can have a front panel USB 3.0 solution. The USB 3.0 module is purchased separately. Chapter 2 ROG RAMPAGE IV GENE 2-25
  • Asus RAMPAGE IV GENE | User Manual - Page 52
    the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue
  • Asus RAMPAGE IV GENE | User Manual - Page 53
    Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. Chapter 2 ROG RAMPAGE IV GENE 2-27
  • Asus RAMPAGE IV GENE | User Manual - Page 54
    to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! • The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. • If you install two VGA
  • Asus RAMPAGE IV GENE | User Manual - Page 55
    ]. 9. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. ROG RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 56
    are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. PSU Suggested List AcBel PC7030 AcBel API5PC36 AcBel PC6018 AMA AA1200U
  • Asus RAMPAGE IV GENE | User Manual - Page 57
    on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ROG RAMPAGE IV GENE 2-31
  • Asus RAMPAGE IV GENE | User Manual - Page 58
    system 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit Intel LGA 2011 CPU Intel LGA 2011 compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card The tools and components in the table above are not included in the motherboard
  • Asus RAMPAGE IV GENE | User Manual - Page 59
    the double latch. Follow the instructions printed on the metal sealing hatch or the illustrations shown below in this manual. The plastic cap will pop up automatically once the CPU is in place and the hatch properly sealed down. 1 A 2 B Load lever C 3 4 A B A B ROG RAMPAGE IV GENE 2-33
  • Asus RAMPAGE IV GENE | User Manual - Page 60
    Chapter 2 5 6 Triangle mark 7 8 B A 9 B A 2-34 Chapter 2: Hardware information
  • Asus RAMPAGE IV GENE | User Manual - Page 61
    2.3.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. To install the CPU heatsink and fan assembly 1 A 2 B B A Chapter 2 ROG RAMPAGE IV GENE 2-35
  • Asus RAMPAGE IV GENE | User Manual - Page 62
    To replace the LGA2011 CPU pad (X-Socket) 1 2 3 4 Chapter 2 5 2-36 Chapter 2: Hardware information
  • Asus RAMPAGE IV GENE | User Manual - Page 63
    2.3.4 1 DIMM installation 2 Chapter 2 3 To remove a DIMM B A ROG RAMPAGE IV GENE 2-37
  • Asus RAMPAGE IV GENE | User Manual - Page 64
    2.3.5 1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps remain the same. 2 Chapter 2 2-38 Chapter 2: Hardware information
  • Asus RAMPAGE IV GENE | User Manual - Page 65
    3 Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. ROG RAMPAGE IV GENE 2-39
  • Asus RAMPAGE IV GENE | User Manual - Page 66
    2.3.6 1 ATX Power connection 2 OR OR Chapter 2 2-40 Chapter 2: Hardware information
  • Asus RAMPAGE IV GENE | User Manual - Page 67
    2.3.7 1 SATA device connection OR 2 OR Chapter 2 ROG RAMPAGE IV GENE 2-41
  • Asus RAMPAGE IV GENE | User Manual - Page 68
    2.3.8 Front I/O Connector To install ASUS Q-Connector 1 2 IDE_LED+ IDE_LED- IDE_LED PWR Ground Reset Ground POWER SW RESET SW To install USB 2.0 Connector To install front panel audio connector Chapter 2 USB 2.0 AAFP To install USB 3.0 Connector USB 3.0 2-42 Chapter 2: Hardware
  • Asus RAMPAGE IV GENE | User Manual - Page 69
    2.3.9 Expansion Card installation To install PCIe x16 cards Chapter 2 ROG RAMPAGE IV GENE 2-43
  • Asus RAMPAGE IV GENE | User Manual - Page 70
    LAN (RJ-45) port* 4. External SATA port 5. USB 2.0 ports 6. Clear CMOS switch 7. Optical S/PDIF out port 8. ROG Connect switch 9. USB 2.0 ports 10. USB 3.0 ports (blue) 11. Audio I/O ports** * and **: Refer to the tables on the next page for LAN port LED, and audio port definitions. 2-44 Chapter
  • Asus RAMPAGE IV GENE | User Manual - Page 71
    BIOS setup information only when the system hangs due to overclocking. • DO NOT insert a different connector to the external SATA port. • Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows Center/Subwoofer Rear Speaker Out Side Speaker Out ROG RAMPAGE IV GENE 2-45
  • Asus RAMPAGE IV GENE | User Manual - Page 72
    Chapter 2 2.3.11 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers 2-46 Chapter 2: Hardware information
  • Asus RAMPAGE IV GENE | User Manual - Page 73
    Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Chapter 2 Connect to 7.1 channel Speakers ROG RAMPAGE IV GENE 2-47
  • Asus RAMPAGE IV GENE | User Manual - Page 74
    order: a. Monitor b. External SCSI devices (starting with the last device on the chain) c. System power 6. After applying power, the system power LED on the system front panel case lights up. For systems with ATX power supplies, the system LED lights up when you press the ATX power button. If your
  • Asus RAMPAGE IV GENE | User Manual - Page 75
    select from the available options using a keyboard or a USB mouse. The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode. You can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ Mode/Advanced Mode screen. Chapter 3 ROG RAMPAGE IV GENE 3-1
  • Asus RAMPAGE IV GENE | User Manual - Page 76
    BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To access the EZ Mode, click Exit, then select ASUS basic system configuration For changing the advanced system settings Monitor For displaying the system
  • Asus RAMPAGE IV GENE | User Manual - Page 77
    and press . Pop-up window Select a menu item and press to display a pop-up window with the configuration options for that of the menu screen are the navigation keys for the BIOS setup program. Use the navigation keys to select items list of options. Chapter 3 ROG RAMPAGE IV GENE 3-3
  • Asus RAMPAGE IV GENE | User Manual - Page 78
    the CPU/motherboard temperature, CPU/5V/3.3V/12V voltage output, CPU/ Chassis/CPU_OPT fan speed Exits the BIOS setup program without saving the changes, saves the changes and resets the system, or enters the Advanced Mode Chapter 3 Selects the boot device priority Displays the system properties
  • Asus RAMPAGE IV GENE | User Manual - Page 79
    of the Extreme Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display the following items: Chapter 3 ROG RAMPAGE IV GENE 3-5
  • Asus RAMPAGE IV GENE | User Manual - Page 80
    any of these preset overclocking configuration options: [Auto] [Manual] [X.M.P.] Loads the optimal settings for the system. Allows you to individually set overclocking parameters. The BCLK frequency, CPU ratio and memory parameters will be optimized. CPU Level Up [Disabled] Allows you to select
  • Asus RAMPAGE IV GENE | User Manual - Page 81
    may cause the system to become unstable! If this happens, revert to the default settings. Load Elipida Hyper Profile Change settings to suit Elpida Hyper Profile by selecting Yes. Load Tight PSC Profile Change settings to suit Tight PSC Profile by selecting Yes. Chapter 3 ROG RAMPAGE IV GENE 3-7
  • Asus RAMPAGE IV GENE | User Manual - Page 82
    Profile Change settings to suit RAW MHZ Profile by selecting Yes. Rampage Tweak [Auto] Mode 1 can help Memory Compatibility. Mode 2 can help overclocking and performance. Configuration options: Time [Auto] Configuration options: [Auto] [4 DRAM Clock] - [40 DRAM Clock] 3-8 Chapter 3: BIOS setup
  • Asus RAMPAGE IV GENE | User Manual - Page 83
    ] [0 DRAM Clock] - [15 DRAM Clock] tWRDR [Auto] Configuration options: [Auto] [0 DRAM Clock] - [7 DRAM Clock] tWRDD [Auto] Configuration options: [Auto] [0 DRAM Clock] - [7 DRAM Clock] Chapter 3 ROG RAMPAGE IV GENE 3-9
  • Asus RAMPAGE IV GENE | User Manual - Page 84
    [Auto]) Configuration options: [Auto] [Normal] [More] Transmitter Slew [Auto]) Configuration options: [Auto] [Normal] [More] MCH Recheck [Auto]) Configuration options: [Auto] [Disabled] [Enabled] Chapter 3 3-10 Chapter 3: BIOS setup
  • Asus RAMPAGE IV GENE | User Manual - Page 85
    . This item allows you to adjust the voltage range from the following percentages to boost the system performance: 0% (Regular), 25% (Medium), 50% (High), 75% (Ultra High) and 100% (Extreme). Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme] ROG RAMPAGE IV GENE 3-11
  • Asus RAMPAGE IV GENE | User Manual - Page 86
    number under light system loading to increase VRM efficiency [Auto] The default power control phase mode [Standard] Proceeds phase control depending on the CPU loading. [Optimized] Loads the ASUS optimized phase tuning profile. [Extreme] Proceeds the full phase mode. [Manual
  • Asus RAMPAGE IV GENE | User Manual - Page 87
    set ASUS optimized phase tuning profile. [Extreme] Allows you to set the Full phase mode. PCH 1.1V PCH 1.1v Switching Freq. [Auto] This item allows you to switch the frequency of PCH power. Set 1.3x for cleaner power. Configuration options: [Auto] [1x] [1.3x] Chapter 3 ROG RAMPAGE IV GENE 3-13
  • Asus RAMPAGE IV GENE | User Manual - Page 88
    . The valid value ranges vary according to your CPU model. Enhanced Intel SpeedStep Technology [Enabled] Allows you to enable or disable the Enhanced Intel® SpeedStep Technology. [Disabled] [Enabled] Disables this function. The operating system dynamically adjusts the processor voltage and core
  • Asus RAMPAGE IV GENE | User Manual - Page 89
    CPU voltage. The values range from 0.800V to 2.100V with a 0.005V interval. Offset Mode Sign [+] This item appears only when you set the CPU VCORE Voltage item to [Offset Mode]. [+] To offset the voltage by a positive value. [-] To offset the voltage by a negative value. ROG RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 90
    a low voltage may make the system unstable. 2nd VTTCPU Voltage [Auto] Allows you to set the second VTTCPU voltage. The values range from 0.80642V to 1.70538V with a 0.00661V interval. CPU VCCSA Voltage [Manual Mode] [Manual Mode] Allows you to set a fixed CPU voltage. [Offset Mode] Allows you
  • Asus RAMPAGE IV GENE | User Manual - Page 91
    values range from 0.6250V to 1.1000V with a 0.00625V interval. CPU Spread Spectrum [Auto] [Auto] Sets to default CPU spread spectrum configuration. [Disabled] Enhances the BCLK overclocking ability. [ ability. [Enabled] Sets to [Enabled] for EMI control. Chapter 3 ROG RAMPAGE IV GENE 3-17
  • Asus RAMPAGE IV GENE | User Manual - Page 92
    Memory Tweakers' Paradise Chapter 3 Scroll down to display the following items: IMC AB/CD Signal 1/2/3 [Auto] Configuration options: [-126] - [-1] [Auto] interval. DRAM Read REF Voltage on CHA/B/C/D The values range from 0.38500x to 0.61500x with a 0.0050x interval. 3-18 Chapter 3: BIOS setup
  • Asus RAMPAGE IV GENE | User Manual - Page 93
    , and security settings. Chapter 3 3.4.1 System Language [English] Allows you to choose the BIOS language version from the options. 3.4.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. 3.4.3 System Time [xx:xx:xx] Allows you to set the system time. ROG RAMPAGE IV GENE 3-19
  • Asus RAMPAGE IV GENE | User Manual - Page 94
    3.4.4 Security The Security menu items allow you to change the system security settings. Chapter 3 • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 2.3.10 Rear panel connection for information on how to erase the RTC RAM.
  • Asus RAMPAGE IV GENE | User Manual - Page 95
    User Password If you have set a user password, you must enter the user password for accessing the system. The User Password item on top of the screen shows the default Not Installed. After you set , the User Password item on top of the screen shows Not Installed. Chapter 3 ROG RAMPAGE IV GENE 3-21
  • Asus RAMPAGE IV GENE | User Manual - Page 96
    3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Chapter 3 3-22 Chapter 3: BIOS setup
  • Asus RAMPAGE IV GENE | User Manual - Page 97
    processor core to appear as two virtual cores to the operating system, enabling the operating system to schedule two threads or processes simultaneously. [Disabled] Only one thread per activated core is enabled. [Enabled] Two threads per activated core are enabled. ROG RAMPAGE IV GENE 3-23
  • Asus RAMPAGE IV GENE | User Manual - Page 98
    Cores [All] Allows you to choose the number of CPU cores to activate in each processor package. Configuration options: [All] [1] [2] [3] [4] [5] Limit CPUID Maximum [Disabled] [Enabled] Allows legacy operating systems to boot even without support for CPUs with extended CPUID functions. [Disabled
  • Asus RAMPAGE IV GENE | User Manual - Page 99
    CPU C3 report to OS. CPU C6 Report [Auto] Allows you to disable or enable the CPU C6 report to OS. CPU C7 Report [Auto] Allows you to disable or enable the CPU C7 report to OS. 3.5.2 System disable the High Precision Event Timer. Configuration options: [Disabled] [Enabled] ROG RAMPAGE IV GENE 3-25
  • Asus RAMPAGE IV GENE | User Manual - Page 100
    Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. Chapter 3 SATA Mode [AHCI Mode] Allows you to set the SATA configuration. [Disabled] Disables the
  • Asus RAMPAGE IV GENE | User Manual - Page 101
    ] [Disabled] Disables the function. [Enabled] Enables the support for USB 3.0 devices on legacy operating systems (OS). EHCI Hand-off [Disabled] [Disabled] Disables the function. [Enabled] Enables the support for operating systems without an EHCI hand‑off feature. ROG RAMPAGE IV GENE 3-27
  • Asus RAMPAGE IV GENE | User Manual - Page 102
    module supports. [HD] [AC97] Sets the front panel audio connector (AAFP) mode to high definition audio. Sets the front panel audio connector (AAFP) mode to legacy AC97 SPDIF Out Type [SPDIF] [SPDIF] Sets to [SPDIF] for SPDIF audio output. [HDMI] Sets to [HDMI] for HDMI audio output. Intel
  • Asus RAMPAGE IV GENE | User Manual - Page 103
    motherboard support DVD. ASM1061 Storage OPROM [Enabled] This item appears only when you set the previous item to [IDE Mode] or [AHCI Mode] and allows you to enable or disable the OptionRom of the ASM1061 storage controller. Configuration options: [Disabled] [Enabled] Chapter 3 ROG RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 104
    system goes into off state after an AC power loss. [Last State] The system goes into either off or on state, whatever the system keyboard to turn on the system. Configuration options: [Disabled] devices to generate a wake event. [Enabled] Enables the PCIE devices to get the system ready for ErP
  • Asus RAMPAGE IV GENE | User Manual - Page 105
    ; MB Temperature; PCH Temperature; PCH Overheat Protection[xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU, motherboard, and the assigned devices temperatures. Select [Ignored] if you do not wish to display the detected temperatures. ROG RAMPAGE IV GENE 3-31
  • Asus RAMPAGE IV GENE | User Manual - Page 106
    to [Silent] to minimize the fan speed for quiet CPU fan operation. [Turbo] Set to [Turbo] to achieve maximum CPU fan speed. [Manual] S ets to [Manual] to display more items for you to manually adjust the CPU upper/lower temperature, and CPU fan upper/lower duty cycle. The following four items
  • Asus RAMPAGE IV GENE | User Manual - Page 107
    CPU temperature. CPU Fan Min. Duty Cycle(%) [20] Use the and keys to adjust the minimum CPU fan duty cycle. The values range from 0% to 100%. When the CPU temperature is under 40ºC, the CPU maximum chassis fan speed. [Manual] Sets to [Manual] to assign detailed fan speed RAMPAGE IV GENE 3-33
  • Asus RAMPAGE IV GENE | User Manual - Page 108
    logo display feature. Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. Wait For 'F1' If Error [Enabled] [Disabled] Disables this function. [Enabled] The system waits for the key to be pressed when error occurs. PCI ROM Priority [Legacy ROM] [Legacy ROM] Launches the
  • Asus RAMPAGE IV GENE | User Manual - Page 109
    Safe Mode, press after POST. Boot Override These items displays the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. Click an item to start booting from the selected device. Chapter 3 ROG RAMPAGE IV GENE 3-35
  • Asus RAMPAGE IV GENE | User Manual - Page 110
    menu items allow you to configure options for special functions. Select an item then press to display the submenu. Chapter 3 3.8.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2 Utility. When you press to start the application. For more details, refer to section 3.10
  • Asus RAMPAGE IV GENE | User Manual - Page 111
    3.8.2 ASUS SPD Information Allows you to get DRAM SPD information. Chapter 3 ROG RAMPAGE IV GENE 3-37
  • Asus RAMPAGE IV GENE | User Manual - Page 112
    in the profile number that saved your BIOS settings, press , and then select Yes. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/CPU configuration and BIOS version
  • Asus RAMPAGE IV GENE | User Manual - Page 113
    3 Scroll down to display the following items: BCLK Frequency; CPU Ratio; CPU Voltage; CPU VCCSA Voltage; DRAM Voltage (CHA, CHB/CHC, CHD); CPU PLL Voltage; VTT CPU Voltage; PCH 1.1v Voltage; PCH 1.5v Voltage; VTTDDR EEPROM settings Allows you to load from EEPROM setting. ROG RAMPAGE IV GENE 3-39
  • Asus RAMPAGE IV GENE | User Manual - Page 114
    to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from window appears. Select Yes to discard changes and exit. ASUS EZ Mode This option allows you to enter the EZ Mode screen. Launch EFI Shell from filesystem device
  • Asus RAMPAGE IV GENE | User Manual - Page 115
    (ISP). Launching ASUS Update After installing AI Suite II from the motherboard support DVD, launch ASUS Update by clicking Update > ASUS Update on the AI Suite II main menu bar. Quit all Windows® applications before you update the BIOS using this utility. Chapter 3 ROG RAMPAGE IV GENE 3-41
  • Asus RAMPAGE IV GENE | User Manual - Page 116
    Updating the BIOS through the Internet To update the BIOS through the Internet: 1. From the ASUS Update screen, select Update BIOS from Internet, and then click Next. 2. Select the ASUS FTP site nearest you to avoid network traffic. If you want to enable the BIOS downgradable function and auto BIOS
  • Asus RAMPAGE IV GENE | User Manual - Page 117
    5. Click Browse to locate your desired picture file. 6. Adjust the picture resolution if needed and click Next to continue. Chapter 3 7. Follow the onscreen instructions to complete the update process. ROG RAMPAGE IV GENE 3-43
  • Asus RAMPAGE IV GENE | User Manual - Page 118
    . 4. Follow the onscreen instructions to complete the update process. Chapter 3 • The screenshots in this section are for reference only. The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www. asus.com for detailed software
  • Asus RAMPAGE IV GENE | User Manual - Page 119
    shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for details. ROG RAMPAGE IV GENE 3-45
  • Asus RAMPAGE IV GENE | User Manual - Page 120
    may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at support.asus.com and save it to a USB flash drive. Recovering the BIOS To recover the BIOS: 1. Turn on the system. 2. Insert the motherboard support DVD to the optical
  • Asus RAMPAGE IV GENE | User Manual - Page 121
    all SATA hard disk drives (optional). Booting the system in DOS environment 1. Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port. 2. Boot your computer. When the ASUS Logo appears, press to show the BIOS Boot Device Select Menu. Insert the support DVD
  • Asus RAMPAGE IV GENE | User Manual - Page 122
    backup is done, press any key to return to the DOS prompt. ASUSTek BIOS Updater for DOS V1.18 [2010/04/29] Current ROM BOARD: RAMPAGE IV GENE VER: 0217 DATE: 11/30/2011 PATH: A:\ Update ROM BOARD: Unknown VER: Unknown DATE: Unknown BIOS backup is done! Press any key to continue. Note Saving
  • Asus RAMPAGE IV GENE | User Manual - Page 123
    system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3 of your motherboard user manual for details. • Ensure to connect all SATA hard disk drives after updating the BIOS file if you have disconnected them. Chapter 3 ROG RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 124
    port (the white USB 2.0 port) at the rear panel of the motherboard 5. Hold the ROG Connect button until the LED begins to blink, then release 6. Wait until the LED stops to blink, then the BIOS flash will be completed. • This function can support devices such as a USB flash disk with FAT 32/16
  • Asus RAMPAGE IV GENE | User Manual - Page 125
    the ASUS contact information. Click an icon to display DVD/ motherboard information Chapter 4 If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the DVD. ROG RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 126
    support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening the files. 1. Click on the Manual tab. Click on ASUS Motherboard Utility Guide
  • Asus RAMPAGE IV GENE | User Manual - Page 127
    Tool menu vary with models. • The screeshots of AI Suite II in this user manual are for reference only. The actual screenshots vary with models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ROG RAMPAGE IV GENE 4-3
  • Asus RAMPAGE IV GENE | User Manual - Page 128
    4.3.2 TurboV EVO ASUS TurboV EVO introduces TurboV that allows you to manually adjust the CPU frequency and related voltages as well as Auto Tuning function that offers automatic and easy overclocking and system level up. After installing AI Suite II from the motherboard support DVD, launch TurboV
  • Asus RAMPAGE IV GENE | User Manual - Page 129
    all changes immediately • Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Ratio function in TurboV. Refer to Chapter 3 of your motherboard user manual for details. • The CPU Ratio bars show the status of the CPU cores, which vary with your CPU model. ROG RAMPAGE IV GENE 4-5
  • Asus RAMPAGE IV GENE | User Manual - Page 130
    varies with your CPU model. CPU Level Up ASUS TurboV EVO includes three CPU level up modes, providing the most flexible autotuning options. • The overclocking result varies with the CPU model and the system configuration. • To prevent overheating from damaging the motherboard, a better thermal
  • Asus RAMPAGE IV GENE | User Manual - Page 131
    TurboV EVO automatically overclocks the CPU, saves BIOS settings and restarts the system. After re-entering Windows, a message appears indicating BIOS settings and restarts the system. After re-entering Windows, a message appears indicating auto tuning success. Click OK to exit. ROG RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 132
    Start. 2. Read through the warning messages and click OK to start auto-overclocking. 3. TurboV automatically adjusts and saves BIOS settings and restarts the system. After re-entering Windows, a message appears indicating auto tuning success. Click OK to exit. Chapter 4 4-8 Chapter 4: Software
  • Asus RAMPAGE IV GENE | User Manual - Page 133
    and extends the overclocking frequency range simultaneously. CPU Power Phase Control Increase phase number under heavy system loading to get more transient and better thermal performance. Reduce phase number under light system loading to increase VRM efficiency. Chapter 4 ROG RAMPAGE IV GENE 4-9
  • Asus RAMPAGE IV GENE | User Manual - Page 134
    to increase OC Range. DRAM Power Phase Control Set Manual Adjustment to faster phase response to increase system performance or to slower phase response to increase DRAM power efficiency. • The actual performance boost may vary depending on your CPU specification. • Do not remove the thermal module
  • Asus RAMPAGE IV GENE | User Manual - Page 135
    EPU. *• Select From the Last Reset to show the total CO2 that has been reduced since you click the Clear button . • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. Chapter 4 ROG RAMPAGE IV GENE 4-11
  • Asus RAMPAGE IV GENE | User Manual - Page 136
    geographic regions and your PC's system loading. The built-in variety of useful profiles offer flexible automatic and manual fan speed controls to achieve a quiet and cool environment. Launching FAN Xpert After installing AI Suite II from the motherboard support DVD, launch FAN Xpert by clicking
  • Asus RAMPAGE IV GENE | User Manual - Page 137
    track of the three system statuses for certain purposes. Launching Sensor Recorder After installing AI Suite II from the motherboard support DVD, launch Sensor on the AI Suite II main menu bar and a highlight of the system statuses will appear on the right panel. ROG RAMPAGE IV GENE 4-13 Chapter 4
  • Asus RAMPAGE IV GENE | User Manual - Page 138
    of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility, you are assured that your computer is always at a healthy operating condition. Launching Probe II After installing AI Suite II from the motherboard support DVD
  • Asus RAMPAGE IV GENE | User Manual - Page 139
    Temperature tab displays the CPU and motherboard temperature sensors, including the current and threshold values. When the CPU/MB temperature exceeds the threshold temperature, the sensor sends an alert to the user through the monitor panels or a pop-up message. Chapter 4 ROG RAMPAGE IV GENE 4-15
  • Asus RAMPAGE IV GENE | User Manual - Page 140
    (per minute) of the CPU, chassis, and power fans. When a fan rotation is less than the threshold rotation, the sensor sends an alert to the user through the monitor panels or a pop-up message. Preference The Preference tab allows you to enable the pop-up window, set the cycle detection interval
  • Asus RAMPAGE IV GENE | User Manual - Page 141
    Alert Log The Alert Log tab displays all normal and critical events detected by the sensors, including the sensor value at the time of the event. Click Clear to clear the log. Chapter 4 ROG RAMPAGE IV GENE 4-17
  • Asus RAMPAGE IV GENE | User Manual - Page 142
    with ease. Launching USB 3.0 Boost After installing AI Suite II from the motherboard support DVD, launch USB 3.0 Boost by clicking Tool > USB 3.0 Boost on the AI Suite II main menu bar. Configuring USB 3.0 Boost 1. Connect a USB 3.0 device to the USB 3.0 port. 2. USB 3.0 Boost automatically detects
  • Asus RAMPAGE IV GENE | User Manual - Page 143
    USB device manufacturer if it fully supports the BC 1.1 function. • ** The actual charging speed may vary with your USB device's conditions. • Ensure to remove and reconnect your USB device after enabling or disabling Ai Charger+ to ensure normal charging function. Chapter 4 ROG RAMPAGE IV GENE
  • Asus RAMPAGE IV GENE | User Manual - Page 144
    the motherboard support DVD, launch ASUS Update by clicking Update> ASUS Update on the AI Suite II main menu bar. Using ASUS Update Select the way you would like to do with the BIOS utility. Click on Next and follow the instructions to complete your request. • Update BIOS from Internet Download the
  • Asus RAMPAGE IV GENE | User Manual - Page 145
    Select the way you would like to do update your boot logo. Then click Next and follow the given instructions. Change the BIOS boot logo of my motherboard 1. Under Current BIOS, click Browse and choose the desired image for your boot logo. Then click on Next. Chapter 4 ROG RAMPAGE IV GENE 4-21
  • Asus RAMPAGE IV GENE | User Manual - Page 146
    downloaded BIOS file and update (or do not update) this BIOS to the motherboard 1. At BIOS File, Browse to download the requested BIOS file to your system in Change the BIOS boot logo of my motherboard to complete logo update. Chapter 4 The fullscreen logo application in BIOS utility must be
  • Asus RAMPAGE IV GENE | User Manual - Page 147
    USB connection between your local and remote PC • Install ROG Connect on the remote PC from the provided Support DVD before using ROG Connect. • ROG Connect must work with ROG Connect Plus to avail full function. and buttons to monitor or adjust your local PC. Chapter 4 ROG RAMPAGE IV GENE 4-23
  • Asus RAMPAGE IV GENE | User Manual - Page 148
    to display more options. RC Poster RC Poster shows the status of the local system during the POST. You can switch the display mode between String and Code. RC Remote RC Remote allows you to operate your local system through the ROG Connect cable. RC Diagram RC Diagram allows you to monitor and
  • Asus RAMPAGE IV GENE | User Manual - Page 149
    GPU TweakIt GPU TweakIt allows you to control and monitor the installed GPU on the local system. Use the sliders to adjust the values and click Apply to save your customized settings. Chapter 4 ROG RAMPAGE IV GENE 4-25
  • Asus RAMPAGE IV GENE | User Manual - Page 150
    ® proprietary UAJ® (Universal Audio Jack) technology for all audio ports, eliminating cable connection errors and giving users plug and play convenience. Follow the installation wizard to install the Realtek® Audio Driver from the support DVD that came with the motherboard package. If the Realtek
  • Asus RAMPAGE IV GENE | User Manual - Page 151
    you have the latest version of the Windows Media Player installed on your system. Ensure to download and install the latest Windows Media Player before installing Sound Blaster X-Fi MB 2. The onboard 8-channel HD audio (High Definition Audio, previously code-named Azalia) CODEC enables high-quality
  • Asus RAMPAGE IV GENE | User Manual - Page 152
    speaker-related or the headphonerelated configurations. Speaker and Headphone EAX Equalizer Mixer THX Adjusting Volume Restoring to the Default Mute Environment audio extensions (EAX) After enabling the EAX effects, you are allowed to select and add your desired environment sounds into the music
  • Asus RAMPAGE IV GENE | User Manual - Page 153
    use. Mixer You can manually adjust the audio volumes, including Line In, Stereo Mix and Microphone, when recording or during the playback. THX THX is a high-fidelity sound technology that allows you to adjust the surround sound effect, sub-woofer volume, etc.. Chapter 4 ROG RAMPAGE IV GENE 4-29
  • Asus RAMPAGE IV GENE | User Manual - Page 154
    The motherboard supports the Intel® Rapid Storage Technology with RAID 0, RAID 1, RAID 10 and RAID 5 support. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP
  • Asus RAMPAGE IV GENE | User Manual - Page 155
    motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: 1. Install the SATA ESC]-Exit [ENTER]-Select Menu ROG RAMPAGE IV GENE 4-31
  • Asus RAMPAGE IV GENE | User Manual - Page 156
    allow you to move through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. Creating a RAID set To create
  • Asus RAMPAGE IV GENE | User Manual - Page 157
    64KB RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. 7. When the Capacity item is selected, enter , or to go back to the CREATE VOLUME menu. Chapter 4 ROG RAMPAGE IV GENE 4-33
  • Asus RAMPAGE IV GENE | User Manual - Page 158
    return to the utility main menu, or press to return to the DELETE VOLUME menu. Exiting the Intel® Rapid Storage Technology Option ROM utility To exit the utility: 1. From the utility main menu, select or press to return to the utility main menu. 4-34 Chapter 4: Software support Chapter 4
  • Asus RAMPAGE IV GENE | User Manual - Page 159
    Double-click AsMakeDisk.exe to launch the ASUS MakeDisk Utility. 5. Select the USB floppy disk drive as the destination disk. 6. Follow the succeeding screen instructions to complete the process. Write-protect the floppy disk to avoid a computer virus infection. Chapter 4 ROG RAMPAGE IV GENE 4-35
  • Asus RAMPAGE IV GENE | User Manual - Page 160
    the USB port or the support DVD into the optical drive, and then click Browse. 3. Click the name of the device you've inserted, go to Drivers > RAID, and then select the RAID driver for the corresponding OS version. Click OK. 4. Follow the succeeding screen instructions to complete the installation
  • Asus RAMPAGE IV GENE | User Manual - Page 161
    4. Click Details tab. The Vendor ID (VID) and Product ID (PID) are displayed. 5. Browse the contents of the RAID driver disk to locate the file txtsetup.oem. 6. Double-click the file. A window appears, allowing you to select the program for opening the oem file. Chapter 4 ROG RAMPAGE IV GENE 4-37
  • Asus RAMPAGE IV GENE | User Manual - Page 162
    ", "usbstor" Add the same line to both sections. The VID and PID vary with different vendors. 10. Save and exit the file. 4-38 Chapter 4: Software support Chapter 4
  • Asus RAMPAGE IV GENE | User Manual - Page 163
    2. For Windows XP, go to Control Panel > Add/Remove Programs. For Windows Vista, go to Control Panel > Programs and Features. 3. Select your current graphics card driver/s. 4. For Windows XP, select Add/Remove. For Windows Vista, select Uninstall. 5. Turn off your computer. ROG RAMPAGE IV GENE 5-1
  • Asus RAMPAGE IV GENE | User Manual - Page 164
    the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi- or a DVI cable to the graphics card. goldfingers 5-2 Chapter 5: Multiple GPU technology support
  • Asus RAMPAGE IV GENE | User Manual - Page 165
    Center window, click Graphics Settings > Performance > AMD CrossFireXTM Configuration. 2. From the Graphics Adapter list, select the graphics card to act as the display GPU. 3. Select Enable CrossFireXTM. 1 4. Click Apply, and then click OK to exit the window. ROG RAMPAGE IV GENE 2 3 4 5-3
  • Asus RAMPAGE IV GENE | User Manual - Page 166
    supports the NVIDIA SLI technology. Download the latest driver from the NVIDIA website (www.nvidia.com). • Ensure that your power supply unit (PSU) can provide at least the minimum power required by your system motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for
  • Asus RAMPAGE IV GENE | User Manual - Page 167
    ™ operating system. Launching the NVIDIA Control Panel You can launch the NVIDIA Control Panel by the following two methods. A. Right click on the empty space of the Windows® desktop and select NVIDIA Control Panel. The NVIDIA Control Panel window appears (See Step B5). ROG RAMPAGE IV GENE 5-5
  • Asus RAMPAGE IV GENE | User Manual - Page 168
    Chapter 5 B1. If you cannot see the NVIDIA Control Panel item in step (A), select Personalize. B2. From the Personalization window, select Display Settings. B3. From the Display Settings dialog box, click Advanced Settings. 5-6 Chapter 5: Multiple GPU technology support
  • Asus RAMPAGE IV GENE | User Manual - Page 169
    Start the NVIDIA Control Panel. Chapter 5 B5. The NVIDIA Control Panel window appears. Enabling SLI settings From the NVIDIA Control Panel window, select Set SLI Configuration. Click Enable SLI and set the display for viewing SLI rendered content. When done, click Apply. ROG RAMPAGE IV GENE 5-7
  • Asus RAMPAGE IV GENE | User Manual - Page 170
    Chapter 5 5-8 Chapter 5: Multiple GPU technology support
  • Asus RAMPAGE IV GENE | User Manual - Page 171
    Fax +49-2102-959911 Web site www.asus.de Online contact www.asus.de/sales Technical Support Telephone (Component) Telephone (System/Note/Eee/LCD) Support Fax Online support +49-1805-010923* +49-1805-010920* +49-2102-9599-11 support.asus.com * EUR 0.14/minute from a German
  • Asus RAMPAGE IV GENE | User Manual - Page 172
    OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont, CA 94539. Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Number : RAMPAGE IV GENE Conforms to the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
Motherboard
RAMPAGE IV
GENE