Asus RS300-E10-PS4 RS300-E10 Series User Manual

Asus RS300-E10-PS4 Manual

Asus RS300-E10-PS4 manual content summary:

  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 1
    RS300-E10 Series RS300-E10-PS4 RS300-E10-RS4 1U Rackmount Server User Guide
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 2
    , and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it. Product warranty or service will not be extended if: (1) the product is repaired
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 3
    Contents Safety information...vii About this guide...viii Chapter 1: Product Introduction 1.1 System package contents 1-2 1.2 Serial number 2.8 Removable/Optional components 2-23 2.8.1 System fans 2-23 2.8.2 Installing ASUS PIKE II RAID card (optional 2-24 2.8.3 Redundant power supply module
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 4
    ...4-4 4.3 Onboard LEDs 4-9 4.4 Internal connectors 4-12 Chapter 5: BIOS Setup 5.1 Managing and updating your BIOS 5-2 5.1.1 ASUS CrashFree BIOS 3 utility 5-2 5.1.2 ASUS EZ Flash Utility 5-3 5.1.3 BUPDATER utility 5-4 5.2 BIOS setup program 5-6 5.2.1 BIOS menu screen 5-7 5.2.2 Menu bar
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 5
    Contents 5.4.7 Onboard LAN Configuration 5-16 5.4.8 Serial Port Console Redirection 5-17 5.4.9 Intel TXT Information 5-19 5.4.10 PCI Subsystem Settings 5-20 5.4.11 USB Configuration 5-20 5.4.12 Network Stack Configuration 5-22 5.4.13 CSM Configuration 5-23 5.4.14 NVMe Configuration 5-24 5.4.
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 6
    Creating a USB flash drive with RAID drive 7-2 7.1.2 Installing the RAID controller driver 7-2 7.2 Management applications and utilities installation 7-5 7.3 Running the Support DVD 7-5 7.4 Installing the system drivers 7-6 Appendix P11C-C/4L/SYS block diagram A-2 Q-Code table...A-3 Notices
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 7
    to fix it by yourself. Contact a qualified service technician or your dealer. Operation Safety • Any operating the server, carefully read all the manuals included with the server package. • Before used batteries according to the manufacturer's instructions. CLASS 1 LASER PRODUCT Heavy System
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 8
    basic knowledge of configuring a server. Contents This guide contains the following parts: 1. Chapter 1: Product how to install optional components into the barebone server. 4. Chapter 4: Motherboard Information This chapter provides instructions for installing the necessary drivers for different
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 9
    , and for product and software updates. 1. ASUS Control Center (ACC) user guide This manual tells how to set up and use the proprietary ASUS server management utility. 2. ASUS websites The ASUS websites worldwide provide updated information for all ASUS hardware and software products. Refer to the
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 10
    x
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 11
    Chapter 1: Product Introduction Product Introduction This chapter describes the general features of the chassis kit. It includes sections on front panel and rear panel specifications. 1
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 12
    System Fans (40 mm x 28 mm) Accessories 1 x RS300-E10 Series Support DVD (with User's Guide) 1 x Bag of Screws 1 x AC Power Cable (RS300-E10-PS4) 2 x AC Power Cable (RS300-E10-RS4) 1 x CPU Heatsink ASUS PIKE II 3008 card ASUS PIKE II 3108 card ASUS ASMB9-iKVM Remote management card Slim-type DVD
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 13
    xxS0xxxxxxxx shown as the figure below. With the correct serial number of the product, ASUS Technical Support team members can then offer a quicker and satisfying solution to your problems. 4 3 2 1 RS300-E10-RS4 xxS0xxxxxxxx 4 3 2 1 RS300-E10-PS4 xxS0xxxxxxxx ASUS RS300-E10 Series 1-3
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 14
    is a 1U barebone server system featuring the ASUS P11CC/4L/SYS Server Board. The server supports Intel® LGA1151 Intel® Xeon® E-21XX/E-22XX Processor plus other latest technologies through the chipsets onboard. Model Name Processor / System Bus Core Logic Total Slots RS300-E10-RS4 RS300-E10-PS4
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 15
    Model Name RS300-E10-RS4 RS300-E10-PS4 Rear I/O Ports 2 x USB 3.1 ports 2 x USB 3.0 ports 1 x VGA port 4 x RJ-45 ports 1 x RJ LED 1 x Message LED OS Support LAN 1-4 LED Please find the latest OS support from http://www.asus.com/ Software ASUS Control Center Management Solution Out of Band
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 16
    panel features The barebone server displays a RS300-E10-RS4 Power cord connector and Redundant power supply LAN port for iKVM* Q-Code LED USB 3.1 ports USB 3.0 ports VGA port RS300-E10-PS4 button *This port is for ASUS ASMB9-iKVM controller card only. 1-6 Chapter 1: Product Introduction
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 17
    1.6 Internal features The barebone server includes the basic components as shown. RS300-E10-RS4 1. 1+1 Redundant 450W 80 PLUS Gold Power Supply 2. PCI Express slot Riser Card 3. ASUS P11C-C/4L/SYS Server Board 4. System fans 5. SAS / SATA backplane (hidden) 6. HDD tray 1-4 7. Front I/O boards (
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 18
    RS300-E10-PS4 1. Single 400W 80 PLUS Gold Power Supply 2. PCI Express slot Riser Card 3. ASUS P11C-C/4L/SYS Server Board 4. System fans 5. SAS / SATA backplane (hidden) 6. HDD tray 1-4 7. Front I/O boards (hidden) 8. Slim-type optical drive 9. SSD Cage 10. Asset Tag The barebone server does not
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 19
    Location switch is pressed (Press the location switch again to turn off) No LAN connection LAN is transmitting or receiving data LAN connection is present ASUS RS300-E10 Series 1-9
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 20
    1.7.2 LAN (RJ-45) LEDs LAN port LED indications Activity/Link LED Status Description Status OFF GREEN BLINKING No link Linked Data activity OFF YELLOW GREEN Speed LED Description 10 Mbps connection 100 Mbps connection 1 Gbps connection ACT/LINK SPEED LED LED LAN port Dedicated
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 21
    Chapter 2: Hardware Information Hardware Information This chapter lists the hardware setup procedures that you have to perform when installing or removing system components. 2
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 22
    2.1 Chassis cover Removing the rear cover 1. Locate and remove the front side screws. Front side screw 2. Loosen the two thumbscrews on the rear panel to release the rear cover from the chassis. 4 3 2 1 Thumbscrews 3. Firmly hold the cover and slide it toward the rear panel for about half
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 23
    cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related. • The product warranty does is facing toward you and the load lever is on your right. ASUS RS300-E10 Series 2-3
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 24
    2. Press the load lever with your thumb (A), then move it to the right (B) until it is released from the retention tab. Do not remove the PnP cap yet from the CPU socket. Doing so may bend the pins of the socket. 3. Lift the load lever until the load plate is completely lifted. Load lever Retention
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 25
    and inedible. DO NOT eat it. If it gets into your eyes or touches your skin, wash it off immediately and seek professional medical help. ASUS RS300-E10 Series 2-5
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 26
    2.2.2 Installing the CPU heatsink and airduct To install the CPU heatsink: 1. Remove the protection sticker on the back of the CPU heatsink. 2. Place the heatsink on top of the installed CPU, ensuring that the four fasteners match the holes on the motherboard. 3. Twist each of the four screws with
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 27
    4. Secure the heat pipe and air duct to the server with two screws. 5. Insert the system fan mylar into the system fan, as shown in the right figure. 6. Insert the two tips of the system fan mylar into the CPU heatsink, as shown in the right figure. ASUS RS300-E10 Series 2-7
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 28
    2.3 System memory 2.3.1 Overview The motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Modules (DIMM) sockets. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. The figure illustrates the
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 29
    a DIMM from a single clip DIMM socket 1. Press the retaining clip outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. ASUS RS300-E10 Series 2-9
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 30
    2.4 Hard disk drives The system supports four hot-swap SATA/SAS hard disk drives. The hard disk drive installed on the drive tray connects to the motherboard SATA/SAS ports via
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 31
    . The drive tray is correctly placed when its front edge aligns with the bay edge. 8. Repeat steps 1 to 7 to install the other SATA/SAS HDDs. ASUS RS300-E10 Series 2-11
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 32
    To install a 2.5" storage device to the front panel: 1. Push the spring lock to the right (A) then pull the tray lever outward (B) to release the drive tray. The drive tray ejects slightly after you pull out the lever. tray lever 2. Firmly hold the tray lever and pull the tray out of the bay.
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 33
    in place. The tray is correctly placed when its front edge aligns with the bay edge. 8. Repeat steps 1 to 7 to install the other storage devices. ASUS RS300-E10 Series 2-13
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 34
    2.5 Expansion slot 1 Q-Code The barebone server comes with two PCIE slots - PCIE1 and PCIE2. an expansio1 n card Q-Code to the PCIE1 slot The pre-installed riser card bracket on the PCIE1 slot supports Full-Height (FH), Half-Length (HL) PCIE x16 expansion cards. To install a PCIE x16 (Gen3 x16
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 35
    the screws that secure the double PCIE slot PCB to the riser card bracket. 4. Remove the double PCIE slot PCB from the riser card bracket. 3 4 3 ASUS RS300-E10 Series 2-15 6 5
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 36
    3 5. Align and install the single PCIE slo4t PCB into the riser card bracket. 6. Secure the single PCIE slot PCB to the riser card bracket with the s3crews removed earlier. 3 6 5 6 7. Install a GPU card to the bracket as sho6wn. 5 8. Secure the GPU card with a screw. 8 9. Install the riser card
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 37
    PCIE1 slot. Refer to section 2.5.2 Installing a standard GPU card to the PCIE1 slot for the steps on installing a standard GPU card to the PCIE1 slot. ASUS RS300-E10 Series 2-17
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 38
    to the following tables. 3. Install the software drivers for the expansion card. When using PCI cards on shared slots, ensure that the drivers support "Share IRQ" or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 39
    No.(Slot location) Short Description 2 (slot 6) PCIE6 PCI-E x16 (x16 Gen3 link) ASUS RS300-E10 Series 2-19
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 40
    2.5.5 Installing M.2 (NGFF) cards To install an M.2 card: 1. Locate the M.2 connector (NGFF1) on the motherboard. 2. Remove the screw on the stand screw. 3. Prepare the M.2 card. 4. Align and insert the M.2 card into the M.2 connector (NGFF1). 5. Secure the M.2 card with the screw you removed in
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 41
    I/O board) 7. System panel connector (from motherboard to front I/O board) 8. Mini-SAS HD connector (from motherboard to SATA/SAS backplane) 9. Serial General Purpose Input/Output connectors ASUS RS300-E10 Series 2-21
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 42
    2.7 SATA/SAS backplane cabling RS300-E10-RS4 RS300-E10-PS4 Connects a 8-pin plug from power supply Connects the data cable connected to the motherboard Connects the SATA/SAS HDDs 2-22 Chapter 2: Hardware Information
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 43
    . This section tells how to remove/install the following components: 1. System fans 2. ASUS PIKE II RAID card (optional) 3. ASUS ASMB9-iKVM (optional) 4. SSD cage Ensure that the system is turned off before fan mylar out of the system fan, as shown in the right figure. ASUS RS300-E10 Series 2-23
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 44
    Lift the fan, then set aside. 5. Repeat steps 3 to 4 to uninstall the other system fans. 2.8.2 Installing ASUS PIKE II RAID card (optional) Follow the steps below to install an optional ASUS RAID card on your motherboard. 1. Remove the default mini-SAS HD cable from the motherboard. 2. Connect the
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 45
    2 screw from the slot bay. 2 2 5. Install the ASUS PIKE II card x8 or x16 card to the bracket as shown. 6. Secure the card with a screw. 7. Install the riser card bracket and PCI Express card assembly back into the PCI Express x16 slot on the motherboard. ASUS RS300-E10 Series 5 5 5 5 2-25
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 46
    2.8.3 Redundant power supply module To replace a failed redundant power supply module: 1. Hold the power supply module lever and press the PSU latch (A) then pull the power supply module (B) out of the system chassis. module lever PSU latch 2. Get the replacement power supply module. 3. Insert the
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 47
    . The motherboard illustration is for reference only. The motherboard layout and appearance may vary depending on the model, but the installation steps remain the same. ASUS RS300-E10 Series 2-27
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 48
    2.8.5 Installing the SSD cage Follow the steps below to install the SSD cage on your server module. 1. Remove the three screws on the side of the SSD cage. 2. Lift the SSD cage and set aside. 3. With the SSD cage resting on a flat surface, insert the SSD card into the SSD cage. • The SSD Card fits
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 49
    on the motherboard. You can install a second SSD Card by removing the optical drive and connecting the SATA cable connector to its onboard SATA connector. ASUS RS300-E10 Series 2-29
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 50
    2.8.6 Replacing optical drive (optional) This server system supports a slim-type optical disk drive. To replace the optical disk drive: 1. Remove the screw that secures the optical drive. Set aside. 2. Push the spring lock
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 51
    Chapter 3: Installation Options Installation Options This chapter describes how to install the optional components and devices into the barebone server. 3
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 52
    kit also comes with a metal stopping bracket that can be installed to provide additional support and stability to the server. The tool-less rail kit package includes: Set of server models. Refer to your server user manual for details. Front end of system 3-2 Chapter 3: Installation Options
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 53
    ) on opposite positions on the rack. A 1U space consists of three square mounting holes with two thin lips on the top and the bottom. 1U ASUS RS300-E10 Series 3-3
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 54
    6. Secure the rail components to the rail using the bundled screws. 7 Press the spring lock ( ) then insert the studs into the selected square mounting holes on the rack post. 8. Press the spring lock on the other end of rail then insert the stud into the mounting hole on the rack post. Extend the
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 55
    3.2 Rail kit dimensions 43.6mm 43.6mm 900mm 589mm ASUS RS300-E10 Series 3-5
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 56
    3-6 Chapter 3: Installation Options
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 57
    Chapter 4: Motherboard Information Motherboard Information This chapter includes the motherboard layout and brief descriptions of the jumpers and internal connectors. 4
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 58
    4.1 Motherboard layout 4-2 Chapter 4: Motherboard Information
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 59
    (16 pin VGA_HDR1) Page 4-16 2-22 4-19 4-17 4-7 2-8 4-22 2-3 4-18 4-12 4-4 4-12 4-7 4-15 4-21 4-20 4-15 4-8 4-14 4-23 4-14 4-6 4-6 4-23 4-17 4-16 4-5 4-22 4-13 4-5 4-18 ASUS RS300-E10 Series 4-3
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 60
    4.2 Jumpers 1. Clear RTC RAM (3-pin CLRTC1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS which include
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 61
    . 3. LAN controller setting (3-pin LAN_SW1-4) These jumpers allow you to enable or disable the onboard LAN_SW1-4. Set to pins 1-2 to activate the Gigabit LAN feature. ASUS RS300-E10 Series 4-5
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 62
    4. ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to force Intel® Management Engine (ME) boot from recovery mode when ME becomes corrupted. 5. PCH_MFG1 setting (3-pin PCH_MFG1) This jumper allows you to update the BIOS ME block. 4-6 Chapter 4: Motherboard Information
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 63
    1-2 to enable it. When enabled, SmaRT allows uninterrupted operation of the system during an AC loss event. This jumper functions only when you install the ASUS ASMB9 management card. ASUS RS300-E10 Series 4-7
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 64
    8. DMLAN setting (3-pin DM_IP_SEL1) This jumper allows you to select the DMLAN setting. Set to pins 2-3 to force the DMLAN IP to static mode (IP=10.10.10.10, submask=255.255.255.0). 4-8 Chapter 4: Motherboard Information
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 65
    (ERRCPU1) The CPU warning LED lights up to indicate that a CPU error or failure has occurred. The warning LED functions only when you install the ASUS ASMB9 management card. ASUS RS300-E10 Series 4-9
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 66
    3. Message LED (MLED1) This onboard LED lights up to red when there is a BMC event log is generated. 4. BMC LED (BMCLED1) The BMC LED lights up to indicate that the on-board BMC is functional. 4-10 Chapter 4: Motherboard Information
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 67
    5. ME LED (MELED1) The ME LED is an onboard LED that blinks when the the ME is operating properly. 6. CATTERR LED (CATTERR1) The CATTERR LED indicates that the system has experienced a fatal or catastrophic error and cannot continue to operate. ASUS RS300-E10 Series 4-11
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 68
    Serial ATA 6.0Gb/s connectors (7-pin SATA5-6 [Gray]) Supported by the Intel® C242 chipset, these connectors are for a mini Serial Attached SCSI (SAS) HD connector, the storage technology that supports Serial ATA. The connector supports up to four devices. 4-12 Chapter 4: Motherboard Information
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 69
    Micro SD card slot functions only when you install the ASUS ASMB9 Management card. • Some memory cards may not be compatible with your motherboard. Ensure that you use only compatible memory cards to prevent loss of data, damage to your device, or memory card, or both. ASUS RS300-E10 Series 4-13
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 70
    rear panel ports. The 4-pin USB (Universal Serial Bus) Type-A port is available for connecting USB 2.0 devices. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. 4-14 Chapter 4: Motherboard Information
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 71
    SGPIO 1 connector is used for the Intel Rapid Storage Technology Enterprise SGPIO interface that controls the LED pattern generation, device information, and general purpose data. ASUS RS300-E10 Series 4-15
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 72
    connectors (4-pin FRNT_FAN1-4; REAR_FAN1; CPU_FAN1) The fan connectors support cooling fans. Connect the fan cables to the fan ! DO NOT place jumper caps on the fan connectors! • All fans feature the ASUS Smart Fan technology. 9. Serial port connectors (10-1 pin COM1-2) These connectors are
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 73
    (14-1 pin TPM1) This connector supports a TPM (Trusted Platform Module) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. ASUS RS300-E10 Series 4-17
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 74
    . • Ensure that the power of the SATA DOM device that you will use is less than 1A. 13. VGA connector (16 pin VGA_HDR1) This connector supports the VGA High Dynamic-Range interface. 4-18 Chapter 4: Motherboard Information
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 75
    a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • This motherboard supports ATX2.0 PSU or later version. • Ensure that your PSU can provide at least the minimum power required by your system. ASUS RS300-E10 Series 4-19
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 76
    15. System panel connector (20-1 pin PANEL1) This connector supports several chassis-mounted functions. 1. System power LED (3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 77
    LED and USB port (2-pin LAN3_LED, LAN4_LED, USB ports) These leads are for the Gigabit LAN activity LEDs and USB ports on the front panel. ASUS RS300-E10 Series 4-21
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 78
    17. M.2 (NGFF) connector (NGFF1-2) These connectors allow you to install M.2 devices. • This connector supports type 2242/2260/2280/22110 devices on both PCI-E and SATA interface. • When the M.2 connector is operating in SATA mode, SATA connector 5 and 6 (SATA 6 Gbps_5-6)
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 79
    is used for monitoring temperature. Connect the thermal sensor cable to the connector and place its probe to the device that you want to monitor. ASUS RS300-E10 Series 4-23
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 80
    4-24 Chapter 4: Motherboard Information
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 81
    Chapter 5: BIOS Setup BIOS Setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. 5
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 82
    disk drive in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the BUPDATER utility. 5.1.1 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 83
    use a DOS‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash Utility: 1. Insert the USB flash disk that contains . 5. Press to switch to the Folder Info field. ASUS RS300-E10 Series 5-3
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 84
    for the motherboard. Save the BIOS file to a bootable USB flash disk drive. 2. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support website at https://www.asus.com/support to the bootable USB flash disk drive you created earlier. 3. Boot the system in DOS mode, then at the prompt, type
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 85
    4. The utility verifies the file, then starts updating the BIOS file. ASUS Tek. EzFlash Utility Current Platform Platform : P11C-C/4L/SYS Version : 0201 Build date: 12/04/2018 system from the hard disk drive. The BIOS update is finished! Please restart your system. C:\> ASUS RS300-E10 Series 5-5
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 86
    5.2 BIOS setup program This motherboard supports a programmable firmware chip that you can update using the provided utility not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. 5-6 Chapter 5: BIOS Setup
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 87
    options To select an item on the menu bar, press the right or left arrow key on the keyboard until the desired item is highlighted. ASUS RS300-E10 Series 5-7
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 88
    5.2.3 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Chipset, Security, Boot, Monitor, Tool, Event Logs, Server Mgmt, and Save & Exit) on the menu bar have their respective
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 89
    System Date [Day MM/DD/YYYY] Allows you to set the system date. System Time [HH:MM:SS] Allows you to set the system time. ASUS RS300-E10 Series 5-9
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 90
    ]. Core Optimizer [Disabled] Enable this item to keep the processor operating at the turbo frequency. Configuration options: [Disabled] [Enabled] Linux support may vary by version of the OS. Engine Boost [Disabled] Enable this item to boost the CPU's frequency. Configuration options: [Disabled
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 91
    ] [Disabled] [Enabled] • Intel SGX support is only available on certain CPUs, such as Manual User Defined Owner EPOCHs] SGX Launch Control Policy [Unlocked]s] Allows you to select the behavior of SGX Launch Control Policy. Configuration options: [Intel Locked] [Unlocked] [Locked] ASUS RS300-E10
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 92
    CPU Flex Ratio Override [Disabled] Allows you to enable or disable CPU Flex Ratio Override. Configuration options: [Disabled] [Enabled] The following item appears only when you set CPU Flex Ratio Override to [Enabled]. CPU Flex Ratio Settings [37] Allows you to set the CPU Flex Ratio. This value
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 93
    [Turbo Performance] Intel(R) SpeedStep(tm) [Enabled] Allows more than two frequency ranges to be supported. Configuration options: [Disabled] [Enabled] Race To Halt (RTH) [Enabled] Allows you to enable all cores enter C-State. Configuration options: [Disabled] [Enabled] ASUS RS300-E10 Series 5-13
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 94
    C-State Auto Demotion [C1 and C3] This item allows you to configure the C-state auto demotion. Configuration options: [Disabled] [C1] [C3] [C1 and C3] C-State Un-demotion [C1 and C3] This item allows you to configure the C-state Un-demotion. Configuration options: [Disabled] [C1] [C3] [C1 and C3]
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 95
    [Enabled] This item allows you to enable or disable Security Device Support. Configuration options: [Disabled] [Enabled] 5.4.5 APM Configuration Restore AC Power Loss [Last enable or disable Runtime Error Logging System. Configuration options: [Disabled] [Enabled] ASUS RS300-E10 Series 5-15
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 96
    5.4.7 Onboard LAN Configuration Onboard I210 LAN Configuration Intel I210 LAN1 LAN Enable [Enabled] Allows you to enable or disable the Intel LAN. Configuration options: [Disabled] [Enabled] The following item appears only when you set LAN Enable to [Enabled]. Intel LAN ROM Type [PXE] Allows you to
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 97
    ] Allows you to set the terminal type. [VT100] ASCII char set. [VT100+] Extends VT100 to support color, function keys, etc. [VT-UTF8] Uses UTF8 encoding to map Unicode chars onto 1 or [19200] [38400] [57600] [115200] Data Bits [8] Configuration options: [7] [8] ASUS RS300-E10 Series 5-17
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 98
    data. Configuration options: [Disabled] [Enabled] Legacy OS Redirection Resolution [80x24] This allows you to set the number of rows and columns supported on the Legacy OS. Configuration options: [80x24] [80x25] Putty Keypad [VT100] This allows you to select the FunctionKey and Keypad on
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 99
    Windows Emergency Management Services (EMS) allow for remote management of a Windows Server OS through a serial port. Configuration options: [None] [Hardware RTS/CTS] [Software Xon/Xoff] 5.4.9 Intel TXT Information You may view the Intel TXT information in this menu. ASUS RS300-E10 Series 5-19
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 100
    [Disabled] Allows you to enable or disable 64-bit capable devices to be decoded in above 4G address space. It only works if the system supports 64-bit PCI decoding. Configuration options: [Disabled] [Enabled] 5.4.11 USB Configuration 5-20 Chapter 5: BIOS Setup
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 101
    It cannot be recognized in boot devices list. [Enabled] Enables the support for USB devices on legacy operating systems (OS). [Auto] Allows options: [Auto] [Manual] The following item appears only when you set Console Redirection to [Manual]. Device power-up ROM] ASUS RS300-E10 Series 5-21
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 102
    . If disabled, Ipv6 PXE boot option will not be created. Configuration options: [Disabled] [Enabled] IPSEC Certificate [Enabled] Enables or disables support for IPSEC Certificate. Configuration options: [Disabled] [Enabled] PXE boot wait time [0] Set the wait time to press ESC key to abort the
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 103
    only when you set the CSM Support to [Enabled]. GateA20 Active [Upon Request] This allows you to set the GA20 option. [Upon Request] GA20 can be disabled using BIOS services. [Always] Do not allow . Configuration options: [UEFI and Legacy] [Legacy only] [UEFI only] ASUS RS300-E10 Series 5-23
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 104
    options: [UEFI ] [Legacy] 5.4.14 NVMe Configuration You may view the NVMe controller and Drive information if an NVMe device is connected. 5.4.15 WHEA Configuration Whea Support [Enabled] This item allows you to enable or disable the WHEA
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 105
    5.4.16 iSCSI Configuration Allows you to configure the iSCSi parameters. 5.4.17 Tls Auth Configuration Allows you to configure the Tls Auth. ASUS RS300-E10 Series 5-25
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 106
    Allows you to select the maximum memory frequency setting. Configuration options: [Auto] [2133] [2400] [2666] ECC Support [Enabled] Allows you to enable or disable the ECC support. Configuration options: [Disabled] [Enabled] Memory Scrambler [Enabled] Allows you to enable or disable Memory Scrambler
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 107
    Adaptive Hardware Equalization] [Adaptive Software Equalization] [Static Equalization] [Disabled] ASPM [Auto] Control ASPM support for PEG 0. Configuration options: [Auto] [Disabled] [ASPM L0s] [ASPM L1] [ASPM or to adjust the value. The values range from 0 to 8191. ASUS RS300-E10 Series 5-27
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 108
    PEG0 Hotplug [Disabled] Allows you to enable or disable PCI Express Hot Plug. Configuration options: [Disabled] [Enabled] PEG 0:1:1 Max Link Speed [Auto] Allows you to set the Max Link Speed. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] PEG1 Slot Power Limit Value [75] Set the upper limit on
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 109
    Allows you to enable or disable VT-d capability. Configuration options: [Disabled] [Enabled] CRID Support [Disabled] Allows you to enable or disable CRID control for Intel SIPP. Configuration options: [ disable X2APIC Opt Out. Configuration options: [Disabled] [Enabled] ASUS RS300-E10 Series 5-29
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 110
    5.5.2 PCH-IO Configuration PCI Express Configuration PCI Express Clock Gating [Enabled] Allows you to enable or disable PCI Express clock gating for each root port. Configuration options: [Disabled] [Enabled] DMI Link ASPM Control [Enabled] Allows you to enable or disable control of active state
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 111
    : [48 MHz] [96 MHz] iDisplay Audio Link T-Mode [2T Mode] Allows you to select the iDisplay Audio Link T-Mode. Configuration options: [1T Mode][2T Mode] ASUS RS300-E10 Series 5-31
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 112
    5.6 Security menu This menu allows a new password to be created or a current password to be changed. The menu also enables or disables the Secure Boot state and lets the user configure the System Mode state. Administrator Password To set an administrator password: 1. Select the Administrator
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 113
    the CSM function is disabled. Configuration options: [Disabled] [Enabled] Secure Boot Mode [Custom] Allows you to set the Secure Boot selector. Configuration options: [Custom] [Standard] ASUS RS300-E10 Series 5-33
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 114
    Key Management This item only appears when the item Secure Boot Mode is set to [Custom]. The Key Management item allows you to modify Secure Boot variables and set Key Management page. Factory Key Provision [Disabled] Allows you to provision factory default Secure Boot keys when the system is in
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 115
    (DBT) / OsRecovery Signatures Configuration options: [Erase] [Set New] [Save to File] 5.7 Boot menu The Boot menu items allow you to change the system boot options. ASUS RS300-E10 Series 5-35
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 116
    appears on the screen depends on the number of devices installed in the system. • To select the boot device during system startup, press when ASUS Logo appears. • To access Windows OS in Safe Mode, please press after POST. Fast Boot [Disabled] Allows you to enable or disable boot with
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 117
    item appears only when you set the Fan Speed Control to [Manual Speed Mode]. REAR_FAN1 / CPU_FAN1 / FRNT_FAN1-4 Duty [50] Allows you to set the desired POST Report waiting time from 1 to 10 seconds. Use the or to adjust the value. The values range from 10 to 100. ASUS RS300-E10 Series 5-37
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 118
    Flash BIOS ROM Utility when you press . Refer to the ASUS EZ Flash Utility section for details. 5.10 Event Logs menu The Event Logs menu items allow you to change the event log settings and view
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 119
    Standard Smbios Type (Not all may be translated). Configuration options: [Disabled] [Enabled] 5.10.2 View Smbios Event Log Press to view all smbios event logs. ASUS RS300-E10 Series 5-39
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 120
    you to enable or disable interfaces to communicate with BMC. Configuration options: [Disabled] [Enabled] The following items appear only when the BMC Support is set to [Enabled]. Wait for BMC [Disabled] Allows you to enable or disable wait for BMC response for specified time out. Configuration
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 121
    ] BMC Warm Reset This item allow you to perform a BMC warm reset. 5.11.1 System Event Log Allows you to change the SEL event log configuration. ASUS RS300-E10 Series 5-41
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 122
    Enabling/Disabling Options SEL Components [Enabled] Allows you to enable or disable event logging for error/progress codes during boot. Configuration options: [No] [Yes, On next reset] [Yes, On every reset] • The following items are configurable only when you set SEL Components to [Enabled]. • All
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 123
    parameters during BIOS phase. Configuration options: [Unspecified] [Static] [DynamicBmcDhcp] [DynamicBmcNonDhcp] IPV6 Lan channel 1 / Lan channel 2 IPV6 Support [Enabled] Allows you to enable or disable LAN1 IPV6 Support. Configuration options: [Disabled] [Enabled] ASUS RS300-E10 Series 5-43
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 124
    Configuration Address source [Unspecified] This item allows you to configure LAN channel parameters statistically or dynamically (by BIOS or BMC). Unspecified option will not modify any BMC network parameters during BIOS phase. Configuration options: [Unspecified] [Static] [DynamicBmcDhcp] 5.11.4
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 125
    that appears on the screen depends on the number of devices installed in the system. Click an item to start booting from the selected device. ASUS RS300-E10 Series 5-45
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 126
    5-46 Chapter 5: BIOS Setup
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 127
    Chapter 6: RAID Configuration RAID Configuration This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. 6
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 128
    Option ROM Utility with RAID 0, RAID 1, RAID 10, and RAID 5 support. 6.1.1 RAID definitions RAID 0 (Data striping) optimizes two identical hard a created RAID set, copy first the RAID driver from the support DVD to a floppy disk before you install an operating system to the selected hard
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 129
    SATA hard disks into the drive bays following the instructions in the system user guide. 2. Connect a SATA signal cable to the signal a RAID set from SATA hard disk drives attached to the SATA connectors supported by Intel® C242 chipset. To do this: 1. Enter the BIOS Setup ASUS RS300-E10 Series 6-3
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 130
    you to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. Before you proceed, ensure that you have installed the Serial ATA hard disk drives, and have set the correct SATA mode in
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 131
    the selection bar then press to select a disk. A small triangle before the Port number marks the selected drive. Press when you are done. ASUS RS300-E10 Series 6-5
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 132
    6. Use the up/down arrow keys to select the stripe size for the RAID array (for RAID 0, 10 and 5 only) then press . The available stripe size values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 133
    VERIFICATION ] ALL DATA IN THE VOLUME WILL BE LOST! (This does not apply to Recovery volumes) Are you sure you want to delete volume "Volume0"? (Y/N): ASUS RS300-E10 Series 6-7
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 134
    6.2.3 Resetting disks to Non-RAID Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive. To reset a RAID set: 1. From the utility main menu, select 3. Reset Disks to Non-RAID and press <
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 135
    Model Serial # Size X XXXXXXXXXXX XXXXXXXX XXX.GB [ ]-Previous/Next [ENTER]-Select [ESC]-Exit Select a destination disk with the same size as the original hard disk. ASUS RS300-E10 Series 6-9
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 136
    3. The utility immediately starts rebuilding after the disk is selected. When done, the status of the degraded RAID volume is changed to "Rebuild". Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023 Copyright(C) 2003-12 Intel Corporation. All Rights Reserved. [ MAIN MENU ]
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 137
    Chapter 4 for more details. 4. From the Exit menu, select Save Changes & Exit, then press . 5. When the confirmation window appears, select Yes, then press . ASUS RS300-E10 Series 6-11
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 138
    disk drives that are connected to the Serial ATA connectors supported by the Southbridge. You need to manually install the Intel® Rapid Storage Technology enterprise utility on a Windows® operating system. Please refer to the installation instructions in Chapter 7. To enter the Intel® Rapid Storage
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 139
    data on one of the selected disks, select NO when prompted. • If you want to Enable volume write-back cache or Initialize volume, click Advanced. ASUS RS300-E10 Series 6-13
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 140
    6. Confirm the volume creation, than click Create Volume to continue. This process could take a while depending on the number and size of the disks. You can continue using other applications during this time. 7. Wait until the process is completed, then click OK when prompted. You still need to
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 141
    RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. ASUS RS300-E10 Series 6-15
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 142
    6.3.3 Deleting a volume Be cautious when deleting a volume. You will lose all data on the hard disk drives. Before you proceed, ensure that you back up all your important data from your hard drives. To delete a volume: 1. From the utility main menu, select the volume (exp. Volume_0000) in Volumes
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 143
    , or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings • Storage system errors ASUS RS300-E10 Series 6-17
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 144
    6-18 Chapter 6: RAID Configuration
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 145
    Chapter 7: Driver Installation Driver Installation This chapter provides the instructions for installing the necessary drivers for different system components in both Linux® and Windows® Operating Systems. 7
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 146
    independent hard disk drive or bootable array. This part provides the instructions on how to install the RAID controller drivers during OS installation your system. 3. Click on the optical drive to browse the contents of the support DVD. 4. Click Drivers > C24x INTEL RAID > Driver > Windows and then
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 147
    flash drive containing the RAID controller driver. Click Browse to continue. 5. Locate the driver in the corresponding folder of the Support DVD or USB flash drive and then click OK to continue. 6. Select the RAID controller driver you need from the list and click Next. ASUS RS300-E10 Series 7-3
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 148
    the RAID driver, • Replace the motherboard Support DVD with the Windows Server installation disc. • Remove the USB flash drive. Select the drive to install Windows and click Next. 8. Setup then proceeds with the OS installation. Follow the onscreen instructions to continue. 7-4 Chapter 7: Driver
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 149
    enabled in your computer, browse the contents of the support DVD to locate the file Setup.exe. Double-click the Setup.exe to run the support DVD. Onscreen display and content vary depending on the motherboard and chipset. The screenshots are provided for reference only. ASUS RS300-E10 Series 7-5
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 150
    This section provides the instructions on how to install the system drivers. You will need to manually install the system drivers on a Windows® operating system. To install the system drivers: 1. Restart the computer, and then log on with Administrator privileges. 2. Insert the support DVD into the
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 151
    5. Follow the onscreen instructions to complete the installation. ASUS RS300-E10 Series 7-7
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 152
    7-8 Chapter 7: Driver Installation
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 153
    Appendix Appendix This appendix includes additional information that you may refer to when configuring the motherboard.
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 154
    P11C-C/4L/SYS block diagram A-2 Appendix
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 155
    firmware image is loaded Reserved for future AMI progress codes Recovery PPI is not available Recovery capsule is not found (continued on the next page) ASUS RS300-E10 Series A-3
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 156
    Description Invalid recovery capsule Reserved for future AMI error codes DXE Core is started NVRAM initialization Installation of the PCH Runtime Services CPU DXE initialization is started PCI host bridge initialization System Agent DXE initialization is started System Agent DXE SMM initialization
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 157
    ASL (see ASL Status Codes section below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization into ACPI mode. Interrupt controller is in APIC mode. ASUS RS300-E10 Series A-5
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 158
    . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 159
    ) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. EU RoHS This product complies with the EU RoHS Directive. For more details, see http://csr.asus.com/english/article.aspx?id=35 ASUS RS300-E10 Series A-7
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 160
    9 năm2011 trở về sau, đều phải đáp ứng các yêu cầu của Thông tư 30/2011/TT-BCT của Việt Nam. Turkey RoHS AEEE Yönetmeliğine Uygundur ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 161
    , Shanghai, China Telephone +86-21-5442-1616 Fax +86-21-5442-0099 Web site https://www.asus.com.cn Technical Support Telephone Online Support +86-20-2804-7506 (400-620-6655) https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=zh-cn ASUS RS300-E10 Series A-9
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 162
    +49-2102-959911 Web site https://www.asus.com/de/ Technical Support Telephone +49-1805-010923 Support Fax +49-2102-959911 Online support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=de-de ASUS Czech Service s.r.o. (Europe) Address Na Rovince 887, 720 00
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 163
    -pl ASK-Service (Russia and CIS) Address 10 Telephone (495) 640-32-75 Web site https://www.asus.com/ru/ Technical Support Telephone 008-800-100-ASUS (008-800-100-2787) Online Support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=ru-ru ASUS RS300-E10 Series
  • Asus RS300-E10-PS4 | RS300-E10 Series User Manual - Page 164
    A-12 Appendix
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164

1U Rackmount Server
RS300-E10-PS4
RS300-E10-RS4
User Guide
RS300-E10 Series