Asus RS500A-S6 PS4 User Guide

Asus RS500A-S6 PS4 Manual

Get Asus RS500A-S6 PS4 PDF manuals and user guides View all Asus RS500A-S6 PS4 manuals
Add to My Manuals
Save this manual to your list of manuals

Asus RS500A-S6 PS4 manual content summary:

  • Asus RS500A-S6 PS4 | User Guide - Page 1
    RS500A-S6/PS4 1U Rackmount Server User Guide
  • Asus RS500A-S6 PS4 | User Guide - Page 2
    , and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it. Product warranty or service will not be extended if: (1) the product is repaired
  • Asus RS500A-S6 PS4 | User Guide - Page 3
    Contents Contents...iii Notices...vii Safety information viii About this guide ix Chapter 1: Product introduction 1.1 System package contents 1-2 1.2 Serial number label 1-2 1.3 System specifications 1-3 1.4 Front panel features 1-5 1.5 Rear panel features 1-5 1.6 Internal features 1-6 1.7
  • Asus RS500A-S6 PS4 | User Guide - Page 4
    layouts 4-2 4.2 Jumpers 4-4 4.3 Internal connectors 4-8 Chapter 5: BIOS setup 5.1 Managing and updating your BIOS 5-2 5.1.1 ASUS EZ Flash 2 utility 5-2 5.1.2 BUPDATER utility 5-3 5.1.3 ASUS CrashFree BIOS 3 utility 5-5 5.2 BIOS setup program 5-6 5.2.1 BIOS menu screen 5-7 5.2.2 Menu bar
  • Asus RS500A-S6 PS4 | User Guide - Page 5
    5-28 5.6 Power menu 5-30 5.6.1 Suspend Mode [Auto 5-30 5.6.2 Repost Video on S3 Resume [No 5-30 5.6.3 ACPI 2.0 Support [ACPI v2.0 5-30 5.6.4 ACPI APIC support [Enabled 5-30 5.6.5 APM Configuration 5-31 5.6.6 Hardware Monitor 5-32 5.7 Boot menu 5-34 5.7.1 Boot Device Priority 5-34 5.7.2 Hard
  • Asus RS500A-S6 PS4 | User Guide - Page 6
    driver installation 7-14 7.3 LAN driver installation 7-15 7.4 ATI SM Bus controller driver installation 7-19 7.5 Display driver installation 7-20 7.6 Management applications and utilities installation 7-23 7.6.1 Running the support DVD 7-23 7.6.2 Drivers menu 7-23 7.6.3 Utilities menu 7-24
  • Asus RS500A-S6 PS4 | User Guide - Page 7
    frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no , we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. vii
  • Asus RS500A-S6 PS4 | User Guide - Page 8
    to fix it by yourself. Contact a qualified service technician or your dealer. Operation Safety • Any operating the server, carefully read all the manuals included with the server package. • Before used batteries according to the manufacturer's instructions. CD-ROM Drive Safety Warning CLASS
  • Asus RS500A-S6 PS4 | User Guide - Page 9
    the battery should not be placed in municipal waste. About this guide Audience This user guide is intended for system integrators, and experienced users with at least 7: Driver installation This chapter provides instructions for installing the necessary drivers for different system components. ix
  • Asus RS500A-S6 PS4 | User Guide - Page 10
    for product and software updates. 1. ASUS Server Web-based Management (ASWM) user guide This manual tells how to set up and use the proprietary ASUS server management utility. 2. ASUS websites The ASUS websites worldwide provide updated information for all ASUS hardware and software products. Refer
  • Asus RS500A-S6 PS4 | User Guide - Page 11
    Product introduction Chapter 1 This chapter describes the general features of the chassis kit. It includes sections on front panel and rear panel specifications. ASUS RS500A-S6/PS4 1-
  • Asus RS500A-S6 PS4 | User Guide - Page 12
    6 x System Fans (40 x 56mm) 1 x Air Duct 1 x RS500A-S6/PS4 User Guide 1 x ASUS ASWM 2.0 User Guide 1 x RS500A-S6/PS4 Support CD (including ASWM*) 1 x Bag of Screws 1 x AC Power Cable ASUS Technical Support team members can then offer a quicker and satisfying solution to your problems. RS500A-S6/PS4
  • Asus RS500A-S6 PS4 | User Guide - Page 13
    System specifications The ASUS RS500A-S6/PS4 is a server featuring the ASUS KGPX-D24 server board. The server supports AMD® LGA 1944 Opteron™ 6100 series processors with HyperTransport™ technology, plus other latest technologies through the chipsets onboard. Processor Support / System Bus Core
  • Asus RS500A-S6 PS4 | User Guide - Page 14
    Server 11 32/64-bit (Subject to change without any notice) Optional Trend Micro anti-virus software ASWM 2.0 Optional ASMB4-iKVM for KVM-over-IP support 615mm x 444mm x 43.6mm (1U) 15 Kg 770W Easy Swap Single Power Supply Operation temperature: 10°C - 35°C Non operation temperature: -40°C - 70°C Non
  • Asus RS500A-S6 PS4 | User Guide - Page 15
    PS/2 keyboard, PS/2 mouse, USB, VGA, and Gigabit LAN do not appear on the rear panel if motherboard is not present. • *The port is for ASUS ASMB4-iKVM controller card only. ASUS RS500A-S6/PS4 1-5
  • Asus RS500A-S6 PS4 | User Guide - Page 16
    The barebone server includes the basic components as shown. 1. PCI Express G2 x16 slot Riser Card (G2 x16 link) 2. Power fans 1 2 3. ASUS KGPX-D24 server board 4 4. Power supply 5. System fan 1* - Connects 3 to CPU_FAN2 connector 6. System fan 2* - Connects to FRNT_FAN1 connector 10
  • Asus RS500A-S6 PS4 | User Guide - Page 17
    Status Description OFF No link GREEN Linked BLINKING Data activity SPEED LED Status Description OFF 10 Mbps connection ORANGE 100 Mbps connection GREEN 1 Gbps connection ASUS RS500A-S6/PS4 1-7
  • Asus RS500A-S6 PS4 | User Guide - Page 18
    1.7.3 HDD status LED HDD status LED HDD Activity LED SATAII/SAS HDD LED Description GREEN ON HDD Status LED RED* GREEN/ RED* HDD Activity LED GREEN ON Blinking Blinking SATAII/SAS HDD power ON HDD has failed and should be swapped immediately RAID rebuilding Read/write data from/into the
  • Asus RS500A-S6 PS4 | User Guide - Page 19
    Hardware setup Chapter 2 This chapter lists the hardware setup procedures that you have to perform when installing or removing system components. ASUS RS500A-S6/PS4 2-
  • Asus RS500A-S6 PS4 | User Guide - Page 20
    from the chassis. Front side screw 3. Lift the cover from the chassis. 4. To recover the rear cover, reverse step 1 to 3. A protection film is pre-attached to the system cover before shipping. Please remove the protection film before turning on the system for proper heat dissipation. 2-2 Chapter
  • Asus RS500A-S6 PS4 | User Guide - Page 21
    cost only if the damage is shipment/transit-related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on box is facing toward you and the load lever is on your left. ASUS RS500A-S6/PS4 2-3
  • Asus RS500A-S6 PS4 | User Guide - Page 22
    2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab A To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. B Load lever 3. Lift the load lever in the direction of the
  • Asus RS500A-S6 PS4 | User Guide - Page 23
    of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer. Some heatsinks come with pre-applied Thermal Interface Material. If so, skip this step. ASUS RS500A-S6/PS4 2-5
  • Asus RS500A-S6 PS4 | User Guide - Page 24
    2.2.2 Installing the CPU heatsink and airduct To install the CPU heatsink: 1. Locate the two screw stands beside the CPU socket. 2. Place the heatsink on top of the installed CPU, ensuring that the two fasteners match the screw stands on the motherboard. 3. Twist each of the two screws with a
  • Asus RS500A-S6 PS4 | User Guide - Page 25
    in the order as follows: DIMM_A3 -> DIMM_C3 -> DIMM_B3 -> DIMM_D3. For CPU1 + CPU2 configuraton, install DIMMs from the orange slots and in the order as follows: DIMM_A3 -> DIMM_E3 -> DIMM_C3 -> DIMM_G3. • For Quad Ranks DIMMs, you can install only one DIMM for each channel. ASUS RS500A-S6/PS4 2-7
  • Asus RS500A-S6 PS4 | User Guide - Page 26
    Memory population table For UDIMM (Single Rank, Dual Ranks) CPU1 Configuration A1 A2 A3 B1 B2 B3 C1 C2 C3 D1 D2 D3 2 DIMMs V V 4 DIMMs V V V V 8 DIMMs V VV VV VV V CPU1 + CPU2 Configuration A1 A2 A3 B1 B2 B3 C1 C2 C3 D1 D2 D3 2 DIMMs V 4 DIMMs V V 8 DIMMs V V V V 16 DIMMs
  • Asus RS500A-S6 PS4 | User Guide - Page 27
    MHz 800 MHz Max. MHz. 1.35V DIMMs 1333 MHz 1333 MHz 1333 MHz 1333 MHz 1066 MHz 800 MHz 1066 MHz 800 MHz 667 MHz ASUS RS500A-S6/PS4 2-9
  • Asus RS500A-S6 PS4 | User Guide - Page 28
    Clip 2.3.4 Removing a DIMM Follow these steps to remove a DIMM. 2 1. Simultaneously press the retaining clips outward to unlock the DIMM. 1 1 DIMM notch Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force
  • Asus RS500A-S6 PS4 | User Guide - Page 29
    2.4 Hard disk drives The system supports four hot-swap SATAII/SAS hard disk drives. The hard disk drive installed on the drive tray connects to the to secure the hard disk drive. 4. Place a SATAII/SAS hard disk drive on the tray, then secure it with four screws. ASUS RS500A-S6/PS4 2-11
  • Asus RS500A-S6 PS4 | User Guide - Page 30
    5. Carefully insert the drive tray and push it all the way to the depth of the bay until just a small fraction of the tray edge protrudes. When installed, the SATAII/SAS connector on the drive connects to the SATAII/ SAS interface on the backplane. 6. Push the tray lever until it clicks, and secures
  • Asus RS500A-S6 PS4 | User Guide - Page 31
    screw from the slot bay. PCI Express x16 slot 3. Install a PCI Express expansion card to the bracket as shown, then secure the card with a screw. ASUS RS500A-S6/PS4 2-13
  • Asus RS500A-S6 PS4 | User Guide - Page 32
    To reinstall the riser card bracket: 1. Align the riser card bracket with the cards to the PCI Express x16 slot on the motherboard. 2. Press the riser card bracket until the golden connectors completely fit the slot and the bracket aligns with the rear panel. 3. Connect the cable(s) to the card, if
  • Asus RS500A-S6 PS4 | User Guide - Page 33
    Standard Interrupt assignments IRQ Priority Standard function 0 1 System Timer 1 2 Keyboard Controller 2 - Programmable Interrupt 3* 11 Communications Port (COM2) 4* 12 Communications Port Channel * These IRQs are usually available for ISA or PCI devices. ASUS RS500A-S6/PS4 2-15
  • Asus RS500A-S6 PS4 | User Guide - Page 34
    ‑installed components to install additional devices. • Refer to Chapter 4 for detailed information on the connectors. 3 22 14 4 4 4 4 5 8 7 9 6 Pre-connected system cables 1. 24-pin SSI power connector (from power supply to motherboard) 2. 8-pin SSI power connectors (from power supply to
  • Asus RS500A-S6 PS4 | User Guide - Page 35
    cables connected to the motherboard Connect the SATAII/SAS HDDs * For PIKE RAID solution, ensure to connect SAS_SGPIO_CON1 to the SGPIO1 connector on the motherboard. ASUS RS500A-S6/PS4 2-17
  • Asus RS500A-S6 PS4 | User Guide - Page 36
    install the optional components into the system. This section tells how to remove/install the following components: 1. System fans 2. ASUS PIKE RAID card (optional) 3. ASUS ASMB4-iKVM (optional) Ensure that the system is turned off before removing any components. 2.8.1 System fans To uninstall the
  • Asus RS500A-S6 PS4 | User Guide - Page 37
    RAID card (optional) Follow the steps below to install an optional ASUS RAID card on your motherboard. If you install the PIKE 1078 or PIKE 2008 Series SAS RAID card, follow slot on the motherboard. 4. Align the golden fingers of the RAID card with the PIKE RAID card slot. ASUS RS500A-S6/PS4 2-19
  • Asus RS500A-S6 PS4 | User Guide - Page 38
    data cables connected to the SATA connectors (black) on the motherboard. 7. Connect the data cables, by numerial order, to the SAS connectors labeled SAS1-4 (blue) on the motherboard. 8. Move the pre-installed SGPIO cable from the SGPIO3 connector to the SGPIO1 connector on the motherboard as shown
  • Asus RS500A-S6 PS4 | User Guide - Page 39
    only) Follow the steps below to install an optional i Button on your motherboard. 1. Locate the i Button slot on the motherboard. 2. Snap the i Button in place. ASUS RS500A-S6/PS4 2-21
  • Asus RS500A-S6 PS4 | User Guide - Page 40
    2.8.3 Installing ASMB4 series management board (optional) Follow the steps below to install an optional ASMB4 series management board on your motherboard. 1. Locate the BMC_FW header on the motherboard. 2. Orient and press the ASMB4 management card in place. 3. Insert the LAN cable plug to the LAN
  • Asus RS500A-S6 PS4 | User Guide - Page 41
    Installation options Chapter 3 This chapter describes how to install the optional components and devices into the barebone server. ASUS RS500A-S6/PS4 2-
  • Asus RS500A-S6 PS4 | User Guide - Page 42
    3.1 Installing friction rail kit items Your friction rail kit package contains: • Two pairs of rack rails (for the rack) • Nut-and-bolt type screws and one pair of server latches Nuts and screws Front rack rails Rear rack rails 3.1.1 Attaching the fixing latches to the server Refer to the image
  • Asus RS500A-S6 PS4 | User Guide - Page 43
    you secure in step 2, as shown in the right figure. 10. Repeat steps 6 to 9 to assemble and attach the rack rail on the other 8 side. 9 8 9 7 ASUS RS500A-S6/PS4 3-3
  • Asus RS500A-S6 PS4 | User Guide - Page 44
    3.1.3 Mounting the server to the rack To mount the server to the rack 1. Place the server on the rack rails, and then push the server all the way to the depth of the rack. 2. Tighten the two rack screws to secure the server in place. To uninstall the server from the rack 1. Loosen the rack screws
  • Asus RS500A-S6 PS4 | User Guide - Page 45
    the front panel until it locks in place. 2. Secure the front end of the server rail to the side of the chassis with one screw. ASUS RS500A-S6/PS4 3-5
  • Asus RS500A-S6 PS4 | User Guide - Page 46
    3. Attach the rear end of the server rail to the side of the chassis, matching each of the two hooks to the holes on the rail. Then slide the rail toward the front panel until it locks in place. 4. Secure the rear end of the server rail to the side of the chassis with one screw. 5. Repeat steps 1
  • Asus RS500A-S6 PS4 | User Guide - Page 47
    server to the rack. 2. Pull the server from the rack. Remember to press the latches on both sides to release the server from the rack. ASUS RS500A-S6/PS4 3-7
  • Asus RS500A-S6 PS4 | User Guide - Page 48
    3-8 Chapter 3: Installation options
  • Asus RS500A-S6 PS4 | User Guide - Page 49
    Motherboard info Chapter 4 This chapter includes the motherboard layout, and brief descriptions of the jumpers and internal connectors. ASUS RS500A-S6/PS4 3- 4-1
  • Asus RS500A-S6 PS4 | User Guide - Page 50
    4.1 Motherboard layouts 4-2 Chapter 4: Motherboard information
  • Asus RS500A-S6 PS4 | User Guide - Page 51
    controller setting (3-pin VGA_SW1)) 3. CPU Fan and Chassis Fan control setting (3-pin CPUFAN_SEL1, CHAFAN_SEL1) 4. LAN controller setting (3-pin LAN_SW1, LAN_SW2) 5. DDR3 voltage control 4-8 4-8 4-9 4-9 4-10 4-10 4-11 4-11 4-12 4-12 4-13 4-13 4-14 4-14 4-15 4-16 ASUS RS500A-S6/PS4 4-3
  • Asus RS500A-S6 PS4 | User Guide - Page 52
    4.2 Jumpers 1. Clear RTC RAM (CLRTC1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system
  • Asus RS500A-S6 PS4 | User Guide - Page 53
    the jumper to pin 2-3, the fan you installed may not work. • If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan control will not work and the fan you installed will always run at full speed. ASUS RS500A-S6/PS4 4-5
  • Asus RS500A-S6 PS4 | User Guide - Page 54
    setting (3-pin LAN_SW1) This jumper allows you to enable or disable the onboard Intel® Gigabit LAN controller. Set to pins 1-2 to activate the Gigabit LAN feature. 5. DDR3 voltage control setting (4-pin LVDDR3_SEL1; LVDDR3_SEL2) These jumpers allow you to adjust the DIMM voltage. Set to pins
  • Asus RS500A-S6 PS4 | User Guide - Page 55
    and turn on the system to recover or update the BIOS. 3. Shut down the system. 4. Set the jumper back to pins 1-2. 5. Turn on the system. ASUS RS500A-S6/PS4 4-7
  • Asus RS500A-S6 PS4 | User Guide - Page 56
    motherboard comes with eight (8) Serial Attached SCSI (SAS) connectors, the next-generation storage technology that supports both Serial Attached SCSI (SAS) and Serial ATA (SATA). Each connector supports one device. • These connectors function only when you install a PIKE RAID card. • Connect the
  • Asus RS500A-S6 PS4 | User Guide - Page 57
    USB34 and USB56, then install the modules to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. ASUS RS500A-S6/PS4 4-9
  • Asus RS500A-S6 PS4 | User Guide - Page 58
    pin CPU_FAN1, CPU_FAN2, FRNT_FAN1, FRNT_FAN2, FRNT_FAN3, FRNT_FAN4, FRNT_FAN5, FRNT_FAN6, REAR_FAN1) The fan connectors support cooling fans of 350 mA-740 mA (8.88 W max.) or a total of 3.15 A-6.66 connectors! • All fans feature the ASUS Fan Speed technology. 4-10 Chapter 4: Motherboard information
  • Asus RS500A-S6 PS4 | User Guide - Page 59
    , device information and general purpose data. These connectors function only when you install an ASUS PIKE SAS RAID card. 8. Serial General Purpose Input/Output connectors (8-1 pin SGPIO3/4) These connectors are used for the SGPIO peripherals of the PROMISE® RAID SATA LED. ASUS RS500A-S6/PS4 4-11
  • Asus RS500A-S6 PS4 | User Guide - Page 60
    opening at the back of the system chassis. The serial port module is purchased separately. 10. BMC header (BMC_FW1) The BMC connector on the motherboard supports an ASUS® Server Management Board 4 Series (ASMB4). 4-12 Chapter 4: Motherboard information
  • Asus RS500A-S6 PS4 | User Guide - Page 61
    11. TPM connector (20-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. SMBus devices using the SMBus interface. This connector functions only when you install the ASUS ASMB4. ASUS RS500A-S6/PS4 4-13
  • Asus RS500A-S6 PS4 | User Guide - Page 62
    13. Location LED cable connector (3-pin LOCLED1) This connector is for a LED cable that allows you to know the server location. 14. SSI power connectors (24-pin SSIPWR1, 8-pin SSI12V1, 8-pin SSI12V2) These connectors are for the SSI power supply plugs. The power supply plugs are designed to fit
  • Asus RS500A-S6 PS4 | User Guide - Page 63
    connector (20-pin PANEL1) This connector supports several chassis-mounted functions. 1. System LED cable that connects to the front message LED. The message LED is controlled by Hardware monitor to indicate an abnormal event occurance. 3. System warning the system power. ASUS RS500A-S6/PS4 4-15
  • Asus RS500A-S6 PS4 | User Guide - Page 64
    16. Auxiliary panel connector (20-pin AUX_PANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs. 1. Front panel SMB (6-1 pin FPSMB) These leads connect the front panel SMBus cable. 2. LAN activity LED (2-pin
  • Asus RS500A-S6 PS4 | User Guide - Page 65
    Chapter 5 This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS setup ASUS RS500A-S6/PS4 3-
  • Asus RS500A-S6 PS4 | User Guide - Page 66
    you to update the BIOS without having to use a DOS‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2 1. Insert the USB flash disk that contains the latest BIOS file to the USB port
  • Asus RS500A-S6 PS4 | User Guide - Page 67
    to a bootable USB flash disk drive. 2. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support website at support.asus.com to the bootable USB flash disk drive you created earlier. 3. Boot the system in DOS disk drive, then press . A:\>BUPDATER /i[file name].ROM ASUS RS500A-S6/PS4 5-3
  • Asus RS500A-S6 PS4 | User Guide - Page 68
    4. The utility verifies the file, then starts updating the BIOS file. ASUSTek BIOS Update for DOS V1.06 (09/08/04) FLASH TYPE: MXIC 25L1605A Current ROM BOARD: KGPX-D24 Series VER: 0204 DATE: 05/31/2010 Update ROM BOARD: KGPX-D24 Series VER: 0205 DATE: 06/04/2010 PATH: WARNING! Do not turn
  • Asus RS500A-S6 PS4 | User Guide - Page 69
    BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when boot failure! The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website at www.asus.com to download the latest BIOS file. ASUS RS500A-S6/PS4 5-5
  • Asus RS500A-S6 PS4 | User Guide - Page 70
    5.2 BIOS setup program This motherboard supports a programmable firmware chip that you can update using the provided utility not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. 5-6 Chapter 5: BIOS setup
  • Asus RS500A-S6 PS4 | User Guide - Page 71
    particular menu. Use the navigation keys to select items in the menu and change the settings. The navigation keys differ from one screen to another. ASUS RS500A-S6/PS4 5-7
  • Asus RS500A-S6 PS4 | User Guide - Page 72
    5.2.4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective menu items. System Time System Date SATA1 SATA2 SATA3
  • Asus RS500A-S6 PS4 | User Guide - Page 73
    . 5.3.1 System Time [xx:xx:xx] Allows you to set the system time. 5.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. ASUS RS500A-S6/PS4 5-9
  • Asus RS500A-S6 PS4 | User Guide - Page 74
    in SATA 5/6 only. LBA/Large Mode [Auto] Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto] Block (Multi-Sector Transfer) M [Auto
  • Asus RS500A-S6 PS4 | User Guide - Page 75
    .61 (C)Copyright 1985-2010, American Megatrends, Inc. OnChip SATA Channel [Enabled] Allows you to enable or disable the onboard SATA channel. Configuration options: [Disabled] [Enabled] ASUS RS500A-S6/PS4 5-11
  • Asus RS500A-S6 PS4 | User Guide - Page 76
    [IDE] Sets the configuration for the Serial ATA connectors supported by the Southbridge chip. Configuration options: [IDE] [ ATA hard disk drives to use the Advanced Host Controller Interface (AHCI), set this item to [AHCI the drive to internally optimize the order of commands. • When this item
  • Asus RS500A-S6 PS4 | User Guide - Page 77
    Speed Node1 Speed DDR3 1333 N/A DIMM_A1 DIMM_A2 DIMM_A3 DIMM_B1 DIMM_B2 DIMM_B3 DIMM_C1 DIMM_C2 DIMM_C3 DIMM_D1 DIMM_D2 DIMM_D3 N/A N/A 2048 MB, 2R, 1333, 43.00ºC/ 109.40ºF N/A N/A N/A N/A N/A N/A N/A N/A N/A ASUS RS500A-S6/PS4 5-13
  • Asus RS500A-S6 PS4 | User Guide - Page 78
    in this menu show the CPU-related information that the BIOS automatically detects. Some items may not appear if your CPU does not support the related functions. Advanced BIOS SETUP UTILITY CPU Configuration Module Version: 5.1104.1 Socket Count : 1 Node Count : 2 Core Count : 12 AMD Opteron(tm
  • Asus RS500A-S6 PS4 | User Guide - Page 79
    ] Allows you to enable or disable the C1E support function. This item should be enabled in order to enable the Enhanced Halt State. Configuration options: [Disabled] [Enabled] CPU2 [Enabled] Allows you to enable or disable CPU2. Configuration options: [Enabled] [Disabled] ASUS RS500A-S6/PS4 5-15
  • Asus RS500A-S6 PS4 | User Guide - Page 80
    5.4.2 Chipset Configuration The Chipset configuration menu allows you to change advanced chipset settings. Select an item then press to display the submenu. Advanced Advanced Chipset Settings BIOS SETUP UTILITY Options for NB NorthBridge Configuration SouthBridge Configuration SR5690
  • Asus RS500A-S6 PS4 | User Guide - Page 81
    to enable or disable the Bank Swizzle mode. Configuration options: [Disabled] [Enabled] Channel B/C/D/E/F/G/H [Enabled] Allows you to enable or disable channel B/C/D/E/F/G/H. Configuration options: [Disabled] [Enabled] ASUS RS500A-S6/PS4 5-17
  • Asus RS500A-S6 PS4 | User Guide - Page 82
    ] [Good] [Super] [Max] [User] DRAM Timing Configuration Advanced BIOS SETUP UTILITY DRAM Timing Configuration DRAM Timing Config [Auto] Options Auto Manual ←→ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2010, American
  • Asus RS500A-S6 PS4 | User Guide - Page 83
    ] [Enabled] Port 0/1/2/3/4/5 ESP [ISP] Selects the type or the Port ESP help. Configuration options: [ISP] [ESP] Dis #THRMTRIP Before KBRst [Enabled] Configuration options: [Disabled] [Enabled] ASUS RS500A-S6/PS4 5-19
  • Asus RS500A-S6 PS4 | User Guide - Page 84
    SATA-IDE Ports Auto Clk Ctrl [Disabled] When set to [Enabled], the system will turn off the clocks for the unused SATA ports in IDE modes. Doing so will enable some power savings. Configuration options: [Disabled] [Enabled] The hot-plug function will be disabled when turning off the clock for the
  • Asus RS500A-S6 PS4 | User Guide - Page 85
    Configuration Hyper Transport Configuration IOMMU [Disabled] Primary Video Controller [Slot1/2-Slot4/5-PI] Debug Option PCI Express Configuration Disabled] Configuration options: [Disabled] [Enable] Lane Reversal [Disabled] Configuration options: [Disabled] [Enabled] ASUS RS500A-S6/PS4 5-21
  • Asus RS500A-S6 PS4 | User Guide - Page 86
    Enter> to display the sub-items. NB-SB Link ASPM [L1] Configuration options: [Disabled] [L1] NP NB-SB VC1 Traffic Support [Disabled] Configuration options: [Disabled] [Enabled] Complicance Mode [Disabled] Configuration options: [Disabled] [Enable] PCIE Slot 1/2, PCIE Slot 3, PCIE Slot 4/5, PIKE Slot
  • Asus RS500A-S6 PS4 | User Guide - Page 87
    ] Configuration options: [Disabled] [Enabled] Primary Video Controller [Slot1/2-Slot4/5-PI] Allows you to select the primary video controller. Configuration options: [Slot1/2-Slot4/5-PIKE-PCI] [Slot4/5-Slot1/2-PIKE-PCI] [PIKE-Slot1/2-Slot4/5-PCI] [PCI-Slot1/2-Slot4/5-PIKE] ASUS RS500A-S6/PS4 5-23
  • Asus RS500A-S6 PS4 | User Guide - Page 88
    Debug Option Advanced Memory Decode on Sec. GFX IOC Peer-to-Peer Mode Northbridge interrupt pin [Disable] [Auto] [Disable] Options Disable Force ←→ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2010, American Megatrends,
  • Asus RS500A-S6 PS4 | User Guide - Page 89
    3E8/IRQ4] [2E8/IRQ3] Onboard LAN Chip [Enabled] Enables or disables the onboard LAN controller. Configuration options: [Disabled] [Enabled] The following items appear only when you set Onboard the onboard LAN1/2/3/4 boot mode. Configuration options: [Disabled] [PXE] [iSCSI] ASUS RS500A-S6/PS4 5-25
  • Asus RS500A-S6 PS4 | User Guide - Page 90
    - 2.24.5-13.4 USB Devices Enabled : None Legacy USB Support USB 2.0 Controller Mode BIOS EHCI Hand-Off Legacy USB1.1 HC Support [Enabled] [HiSpeed] [Enabled] [Enabled] Enables support for legacy USB. AUTO option disables legacy support if no USB devices are connected. ←→ Select Screen
  • Asus RS500A-S6 PS4 | User Guide - Page 91
    if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes] ASUS RS500A-S6/PS4 5-27
  • Asus RS500A-S6 PS4 | User Guide - Page 92
    Configure Remote Access type and parameters Remote Access [Enabled] Serial port number Base Address, IRQ Serial Port Mode Flow Control Redirection After BIOS POST Terminal Type [COM2] [2F8h, 3] [57600 8,n,1] [Hardware] [Disabled] [VT-UTF8] Select Remote Access type. ←→ Select Screen
  • Asus RS500A-S6 PS4 | User Guide - Page 93
    [57600 8,n,1] [38400 8,n,1] [19200 8,n,1] [09600 8,n,1] Flow Control [Hardware] Allows you to select the flow control for console redirection. Configuration options: [None] [Hardware] [ you to select the target terminal type. Configuration options: [ANSI] [VT100] [VT-UTF8] ASUS RS500A-S6/PS4 5-29
  • Asus RS500A-S6 PS4 | User Guide - Page 94
    [Enabled] Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled] [Enabled] 5-30
  • Asus RS500A-S6 PS4 | User Guide - Page 95
    selection. System Time [12:30:30] Use the , or key to select a field. Use the or key to configure alarm time. ASUS RS500A-S6/PS4 5-31
  • Asus RS500A-S6 PS4 | User Guide - Page 96
    Front Fan4 Speed Front Fan5 Speed Front Fan6 Speed Rear Fan1 Speed Fan Speed Control VCORE1 Voltage VCORE2 Voltage P1DDR3 Voltage P2DDR3 Voltage [ 38 ºC/ 100 ºF] [ N/A ] [ N/A ] [ N/A ] [ 904 RPM] [ N/A ] [ N/A ] [ N/A ] [ N/A ] [ N/A ] [ N/A ] [ N/A ] [ N/A ] [Generic Mode
  • Asus RS500A-S6 PS4 | User Guide - Page 97
    Fan Speed Control [Generic Mode] Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan speeds for more efficient system operation. Configuration options: [Full the onboard voltage regulators. Select [Ignored] if you do not want to detect this item. ASUS RS500A-S6/PS4 5-33
  • Asus RS500A-S6 PS4 | User Guide - Page 98
    5.7 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press to display the submenu. Main Advanced Server BIOS SETUP UTILITY Power Boot Tools Boot Settings Boot Device Priority Hard Disk Drives CDROM Drives Boot Settings Configuration
  • Asus RS500A-S6 PS4 | User Guide - Page 99
    feature. Configuration options: [Disabled] [Enabled] Set this item to [Enabled] to use the ASUS MyLogo2™ feature. AddOn ROM Display Mode [Force BIOS] Allows you to set the display mode for the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled] ASUS RS500A-S6/PS4 5-35
  • Asus RS500A-S6 PS4 | User Guide - Page 100
    5.7.4 Security The Security menu items allow you to change the system security settings. Select an item then press to display the configuration options. BIOS SETUP UTILITY Boot Security Settings Supervisor Password : Not Installed User Password : Not Installed to change
  • Asus RS500A-S6 PS4 | User Guide - Page 101
    accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Configuration options: [Setup] [Always] ASUS RS500A-S6/PS4 5-37
  • Asus RS500A-S6 PS4 | User Guide - Page 102
    Exit Press ENTER to run the utility to select and update BIOS. This uitlity supports 1. FAT 12/16/32 (r/w) 2. NTFS (read only) 3. CD-DISC Exit v02.61 (C)Copyright 1985-2009, American Megatrends, Inc. ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press , a confirmation message
  • Asus RS500A-S6 PS4 | User Guide - Page 103
    window appears. Select YES to load default values. Select Exit & Save Changes or make other changes before saving the values to the non-volatile RAM. ASUS RS500A-S6/PS4 5-39
  • Asus RS500A-S6 PS4 | User Guide - Page 104
    5-40 Chapter 5: BIOS setup
  • Asus RS500A-S6 PS4 | User Guide - Page 105
    RAID configuration Chapter 6 This chapter provides instructions for setting up, creating and configuring RAID sets using the available utilities. ASUS RS500A-S6/PS4 3-
  • Asus RS500A-S6 PS4 | User Guide - Page 106
    or speed. If you want to boot the system from a hard disk drive included in a created RAID set, copy first the RAID driver from the support CD to a floppy disk before you install an operating system to the selected hard disk drive. 6-2 Chapter 6: RAID configuration
  • Asus RS500A-S6 PS4 | User Guide - Page 107
    SATA hard disks into the drive bays following the instructions in the system user guide. 2. Connect a SATA signal cable to the signal a RAID set from SATA hard disk drives attached to the SATA connectors supported by AMD SP5100 chipset. To do this: 1. Enter the BIOS Setup ASUS RS500A-S6/PS4 6-3
  • Asus RS500A-S6 PS4 | User Guide - Page 108
    Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Promise RAID. To enter the FastBuild Utility: 1. Install all LD View / LD Define Menu .....[ 2 ] Delete LD Menu 3 ] Controller Configuration .....[ 4 ] [ Keys Available ] Press 1..4 to Select Option
  • Asus RS500A-S6 PS4 | User Guide - Page 109
    (RAID 0, RAID 1, RAID 10, RAID 5, SPAN or JBOD) To create a RAID set: 1. From the main control panel, press to to enter the LD View Menu. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [Ctrl+C] Define LD [Enter] View LD [Ctrl+V] View JBOD Disk [ESC] Exit ASUS RS500A-S6/PS4 6-5
  • Asus RS500A-S6 PS4 | User Guide - Page 110
    2. Press + to define an LD and use to select a desired RAID mode. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ LD Define Menu ] LD No LD Name LD 1 Logical Drive 1 RAID Mode Drv RAID 1 0 Stripe Block Gigabyte Boundary Read Policy 128 KB ON NA
  • Asus RS500A-S6 PS4 | User Guide - Page 111
    , the de2f5a0u.l0t5 HDTXXLXDXXnXaXmXeXXwXiXll be usSeAdT.A 3G 250.05 Assignment Y Y N N [ Keys Available ] [↑] Up [↓] Down [PaUp/PaDn] Switch Page [Space] Change Option [Ctrl+Y] Save [ESC] Exit ASUS RS500A-S6/PS4 6-7
  • Asus RS500A-S6 PS4 | User Guide - Page 112
    6. Press + again and enter the LD name. Press to continue. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ LD Define Menu ] LD No LD Name LD 1 Logical Drive 1 RAID Mode Drv RAID 1 2 Stripe Block Gigabyte Boundary Read Policy 128 KB ON Read Cache
  • Asus RS500A-S6 PS4 | User Guide - Page 113
    : 200 250.05 250.05 Assignment Y Y N N [ Keys Available ] [↑] Up [↓] Down [PaUp/PaDn] Switch Page [Space] Change Option [0-9] Input Capacity [Enter] Save [BackSpace] Delete [Esc] Exit ASUS RS500A-S6/PS4 6-9
  • Asus RS500A-S6 PS4 | User Guide - Page 114
    /PaDn] Switch Page [Ctrl+C] Define LD [Enter] View LD [Ctrl+V] View JBOD Disk [ESC] Exit 11. Press any key to return to the main control panel. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ View LD Definition Menu] LD No LD Name LD 1 RAID1 RAID Mode Drv RAID 1 2 Capacity
  • Asus RS500A-S6 PS4 | User Guide - Page 115
    Drive Assignment .......[ 1 ] LD View / LD Define Menu .....[ 2 ] Delete LD Menu 3 ] Controller Configuration .....[ 4 ] [ Keys Available ] Press 1..4 to Select Option [ESC]Exit 2. Select the PaDn] Switch Page [Del/Alt+D] Delete LD [Ctrl+V] View JBOD Disk [ESC] Exit ASUS RS500A-S6/PS4 6-11
  • Asus RS500A-S6 PS4 | User Guide - Page 116
    3. Press + to confirm and delete the selected RAID set. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ View LD Definition Menu] LD No LD Name LD 1 RAID1 RAID Mode Drv RAID 1 2 Capacity(GB) 199.99 Stripe Block NA Read Policy NA Write Policy WriteThru Port:ID 01
  • Asus RS500A-S6 PS4 | User Guide - Page 117
    Drive Assignment .......[ 1 ] LD View / LD Define Menu .....[ 2 ] Delete LD Menu 3 ] Controller Configuration .....[ 4 ] [ Keys Available ] Press 1..4 to Select Option [ESC]Exit 2. The drive assignment +H] Full Erase [ESC] Exit [↑] Up [↓] Down [PaUp/PaDn] Switch Page ASUS RS500A-S6/PS4 6-13
  • Asus RS500A-S6 PS4 | User Guide - Page 118
    2004-2010 Promise Technology, Inc. [ Main Menu ] View Drive Assignment .......[ 1 ] LD View / LD Define Menu .....[ 2 ] Delete LD Menu 3 ] Controller Configuration .....[ 4 ] [ Keys Available ] Press 1..4 to Select Option [ESC]Exit 2. The system resources configuration is displayed as shown
  • Asus RS500A-S6 PS4 | User Guide - Page 119
    Driver installation Chapter 7 This chapter provides instructions for installing the necessary drivers for different system components. ASUS RS500A-S6/PS4
  • Asus RS500A-S6 PS4 | User Guide - Page 120
    disk drive or bootable array. This part provides instructions on how to install the RAID controller drivers during OS installation. The RAID card a SATA optical drive and PROMISE RAID, you cannot boot into FreeDOS using this support CD. Either reset SATA Port1-4 in BIOS to [IDE] and boot again or
  • Asus RS500A-S6 PS4 | User Guide - Page 121
    you want to create and press to enter the sub-menu. Promise SW ROMB Controller Driver Windows Server 2003 32/64 bit Windows Server 2008 32 bit Windows Server 2008 64 to the floppy disk drive. 7. Press . 8. Follow screen instructions to create the driver disk. ASUS RS500A-S6/PS4 7-3
  • Asus RS500A-S6 PS4 | User Guide - Page 122
    installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage devices(s): * To specify additional SCSI adapters, DVD-ROM drives, or special disk controllers for use with Windows, including those for which you
  • Asus RS500A-S6 PS4 | User Guide - Page 123
    the OS installation. Follow screen instructions to continue. To an existing Windows® Server OS To install the RAID controller driver on an existing Windows controller drivers. When found, click Next to install the drivers. 11. Click Finish after the driver installation is done. ASUS RS500A-S6/PS4
  • Asus RS500A-S6 PS4 | User Guide - Page 124
    button. 3. Click the "+" sign before the item SCSI and RAID controllers, and then the Promise AHCI Compatible RAID Controller item should appear. The screen differs based on the controller. 4. Right-click the RAID controller driver item, and then select Properties from the menu. 5. Click the
  • Asus RS500A-S6 PS4 | User Guide - Page 125
    Red Hat® Enterprise Linux OS 4.7/4.8 To install the RAID controller driver when installing Red Hat® Enterprise OS: 1. Boot the system from the Red Hat® OS installation CD. 2. At the to continue. More Driver Disks? Do you wish to load any more driver disks? Yes No ASUS RS500A-S6/PS4 7-7
  • Asus RS500A-S6 PS4 | User Guide - Page 126
    begin testing the CD media before installation press OK. Choose Skip to skip the media test and start the installation. OK Skip 8. Follow the onscreen instructions to finish installing the RedHat operating system. 7-8 Chapter 7: Driver installation
  • Asus RS500A-S6 PS4 | User Guide - Page 127
    Red Hat® Enterprise Linux OS 5.0 To install the RAID controller driver when installing Red Hat® Enterprise OS: 1. Boot the system from the Red Hat® OS installation CD. 2. At the boot press "OK" to continue. OK Back The drivers for the RAID card are installed to the system. ASUS RS500A-S6/PS4 7-9
  • Asus RS500A-S6 PS4 | User Guide - Page 128
    6. When asked if you will load additional RAID controller drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 7. Follow the onscreen instructions to finish the OS installation. 7-10 Chapter 7: Driver installation
  • Asus RS500A-S6 PS4 | User Guide - Page 129
    SUSE Linux 11 OS To install the RAID controller driver when installing SUSE Linux Enterprise Server OS: 1. Boot the system from the SUSE OS installation CD. 2. Use the F3 Video Mode English(US) 1024 X768 F4 Source DVD Yes No File URL F5 Kernel F6 Driver Default No ASUS RS500A-S6/PS4 7-11
  • Asus RS500A-S6 PS4 | User Guide - Page 130
    4. Insert the RAID driver disk to the floppy disk drive. Type the command acpi=off apic=bigsmp brokenmodules=ahci in Boot Options field, and press . Boot from Hard Disk Installation Repair Installed System Rescue System Check Installation Media Firmware Test Memory Test Boot Options acpi=off
  • Asus RS500A-S6 PS4 | User Guide - Page 131
    as shown below. Please choose the Driver Update medium. sda: USB Floppy sr0: CD-ROM, ASUS DRW-1612BLT sdb: Disk, Promise 1X2 Morror/RAID1 sd3: Disk, Promise RAID Console other device OK Back 7. Select Back and follow the onscreen instructions to finish the installation. ASUS RS500A-S6/PS4 7-13
  • Asus RS500A-S6 PS4 | User Guide - Page 132
    instructions on how to install the AMD® processor driver on the system. You need to manually install support DVD to locate the file AUTORUN.EXE and double-click the AUTORUN.EXE to run the support DVD. 3. Click the item AMD Processor Driver from the menu, and then follow the onscreen instructions
  • Asus RS500A-S6 PS4 | User Guide - Page 133
    is enabled in your computer. If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file AUTORUN.EXE and double-click the AUTORUN.EXE and follow step 4 to run the installation. 3. Click Intel® PRO/1000 Gigabit Adapters Driver. ASUS RS500A-S6/PS4 7-15
  • Asus RS500A-S6 PS4 | User Guide - Page 134
    4. When the Intel® Network Connections - InstallShield Wizard window appears, click Next to start the installation. 5. Click I accept the terms in the license agreement and then click Next to continue. 7-16 Chapter 7: Driver installation
  • Asus RS500A-S6 PS4 | User Guide - Page 135
    6. Select the programs you want to install and click Next to continue. 7. Click Install to start the installation. ASUS RS500A-S6/PS4 7-17
  • Asus RS500A-S6 PS4 | User Guide - Page 136
    8. The programs you select are being installed. 9. Click Finish to finish the installation. 7-18 Chapter 7: Driver installation
  • Asus RS500A-S6 PS4 | User Guide - Page 137
    computer, browse the contents of the support DVD to locate the file AUTORUN.EXE and double-click the AUTORUN.EXE to run the support DVD. 3. Click the item ATI SM Bus Controller Driver from the menu, and then follow the onscreen instructions to complete the installation. ASUS RS500A-S6/PS4 7-19
  • Asus RS500A-S6 PS4 | User Guide - Page 138
    7.5 Display driver installation This section provides instructions on how to install the ASPEED display driver. To install the ASPEED display driver on a Windows® OS: 1. Restart the computer, then log on with Administrator privileges. 2. Insert the motherboard/system support DVD to the optical drive
  • Asus RS500A-S6 PS4 | User Guide - Page 139
    4. When the ASPEED InstallShield Wizard window appears, click Next to continue. 5. Click Install to start the installation. ASUS RS500A-S6/PS4 7-21
  • Asus RS500A-S6 PS4 | User Guide - Page 140
    6. The system installs the driver automatically. 7. When the installation completes, click Finish to exit the wizard. 7-22 Chapter 7: Driver installation
  • Asus RS500A-S6 PS4 | User Guide - Page 141
    The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website (www.asus.com) for updates. 7.6.1 Running the support DVD Place the support DVD to the optical display and driver options vary under different operating system versions. ASUS RS500A-S6/PS4 7-23
  • Asus RS500A-S6 PS4 | User Guide - Page 142
    menu displays the software applications and utilities that the motherboard supports. Click an item to install. 7.6.4 Make disk menu The the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. 7-24 Chapter 7: Driver
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
1U Rackmount Server
RS500A-S6/PS4
User Guide