Asus SABERTOOTH 990FX R2.0 SABERTOOTH 990FX R2.0 User's Manual
Asus SABERTOOTH 990FX R2.0 Manual
View all Asus SABERTOOTH 990FX R2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus SABERTOOTH 990FX R2.0 manual content summary:
- Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 1
Motherboard SABERTOOTH 990FX R2.0 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 2
. ("ASUS"). Product warranty or service will ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL for free by downloading it from http://support.asus.com/download or (2) for the cost however you encounter any problems in obtaining the full - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 3
2.1.3 CPU heatsink and fan assembly installation 2-5 2.1.4 DIMM installation 2-7 2.1.5 ATX Power connection 2-8 2.1.6 SATA device connection 2-9 2.1.7 Front I/O Connector 2-10 2.1.8 Expansion Card installation 2-11 2.2 BIOS update utility 2-12 2.3 Motherboard rear and audio connections - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 4
36 3.10 Updating BIOS 3-37 3.10.1 ASUS Update 3-37 3.10.2 ASUS EZ Flash 2 3-40 3.10.3 ASUS BIOS Updater 3-41 Chapter 4: Software support 4-1 4.1 Installing an operating system 4-1 4.2 Support DVD information 4-1 4.2.1 Running the support DVD 4-1 4.2.2 Obtaining the software manuals - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 5
USB BIOS Flashback Wizard 4-29 4.3.10 Network iControl 4-31 4.3.11 ASUS Update 4-36 4.3.12 MyLogo2 4-37 4.3.13 Audio configurations 4-38 Chapter 5: RAID support 5-1 5.1 RAID configurations 5-1 5.1.1 RAID definitions 5-1 5.1.2 Installing Serial ATA hard disks 5-2 5.1.3 Setting the - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 6
6.2.3 6.2.4 Installing the device drivers 6-7 Enabling the NVIDIA® SLI™ technology 6-8 Appendices A-1 Notices ...A-1 ASUS contact information A-4 vi - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 7
Ensure that your power supply is set to the correct voltage in your service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals problems with the product, contact a qualified service technician or your retailer. vii - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 8
chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. • Chapter 4: Software support This chapter describes the contents of the support DVD that comes with the motherboard package and the software. • Chapter 5: RAID - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 9
note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 10
SABERTOOTH 990FX R2.0 specifications summary CPU Chipset System Bus Memory Expansion slots Multi-GPU support LAN Storage Audio AMD® Socket AM3+ for AMD® FX series CPU up to 8-core compatible with AMD® Socket AM3 for AMD® Phenom™ II / Athlon II™ / Sempron™ 100 series processors Supports AMD® 140W - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 11
Front panel USB 3.0 support Remote GO! USB 3.0 Boost Network iControl ASUS UEFI BIOS EZ Mode USB BIOS Flashback AI Suite II ASUS Q-Connector ASUS Q-Shield ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED) ASUS Q-Slot ASUS Q-DIMM ASUS O.C. Profile Ai Charger+ ASUS EZ Flash 2 ASUS MyLogo2 Multi-language - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 12
SABERTOOTH 990FX R2.0 specifications summary Back Panel I/O ports Internal I/O connectors BIOS features Manageability Support DVD contents Form factor 1 x PS/2 keyboard/mouse combo port 1 x Optical S/PDIF Output port 2 x eSATA 6Gb/s ports [red] 1 x USB BIOS Flashback button 1 x LAN (RJ-45) port 4 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 13
package for the following items. User Manual ASUS SABERTOOTH 990FX R2.0 motherboard User manual Support DVD 4 x Serial ATA 6.0 Gb/s cables 1 x ASUS SLI™ bridge connector 1 x TUF Certification card Five-year warranty 1 x ASUS Q-Shield 1 x 2-in-1 ASUS Q-Connector kit 1 x TUF Five-year warranty - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 14
screws Philips (cross) screwdriver PC chassis Power supply unit AMD AM3+ CPU AMD AM3+ compatible CPU Fan DDR3 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package. xiv - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 15
1866 MHz Support The motherboard supports the dual-channel DDR3 memory that features data transfer rates of 1866 MHz to boost the system's performance, and to meet the higher bandwidth requirements of 3D graphics, multimedia, and Internet applications. Chapter 1 ASUS SABERTOOTH 990FX R2.0 1-1 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 16
(E.S.P.) Design E.S.P., an ASUS exclusive feature, is designed for key components such as CPU, memory, graphics cards, LAN, and USB 3.0 to help improve system efficiency and reduce heat generation. TUF Components (Choke, Cap. & MOSFET; certified by military-standard) This motherboard provides rugged - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 17
the motherboard's lifespan. MemOK! MemOK!, the remarkable memory rescue tool, allows you to simply press a button to patch memory issues, ensure memory boot compatibility, determine fail-safe settings, and dramatically improve the system's bootup. 1.1.5 ASUS EZ DIY ASUS UEFI BIOS (EZ Mode) ASUS UEFI - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 18
This motherboard features the ASUS O.C. Profile that allows you to store or load multiple BIOS settings. The BIOS settings can be stored in the CMOS or a separate file, giving you the freedom to share and distribute your favorite overclocking settings. 1.1.6 Other special features 8 Channel Audio - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 19
before you install motherboard components or change any motherboard settings. • Unplug ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. Chapter 1 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 20
1.2.2 Motherboard layout Chapter 1 Refer to 1.2.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. 1-6 Chapter 1: Product introduction - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 21
, USB1112) 15. Standby power LED 16. TPM connector (20-1 pin TPM) 17. Front panel audio connector (10-1 pin AAFP) 18. Digital audio connector (4-1 pin SPDIF_OUT) Page 1-33 1-8 1-31 1-9 1-22 1-27 1-26 1-27 1-35 1-34 1-23 1-30 1-24 1-29 1-25 1-35 1-32 1-28 Chapter 1 ASUS SABERTOOTH 990FX R2.0 1-7 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 22
Processing Unit (CPU) The motherboard comes with an AM3+ socket designed for AMD® FX Series CPU up to 8core, also compatible with AMD® socket AM3 for AMD® Phenom™ II/Athlon™ II/ Sempron™ 100 Series Processors. Ensure that all power cables are unplugged before installing the CPU. The AM3+ socket has - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 23
The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations Chapter 1 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 24
vendor-marked or at a higher frequency, refer to section 3.4 Ai Tweaker menu for manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition. Chapter 1 1-10 Chapter 1: Product introduction - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 25
SABERTOOTH 990FX R2.0 Motherboard Qualified Vendors Lists (QVL) DDR3 2400 MHz capability Vendors Part NO. - - - - Kingmax N/A Timing Voltage 7-10-10-28 1.65 9-10-9-28 1.65 - - DIMM socket support (Optional) 1 2 4 • • • • • • • • Chapter 1 ASUS SABERTOOTH 990FX R2.0 1-11 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 26
DDR3 2133 MHz capability Vendors Part No. Size CORSAIR CORSAIR CORSAIR ) 4GB SS/ Chip Brand Chip Timing Voltage DIMM socket DS NO. support (Optional) 1 2 4 DS - - 9-10- 1.65 • • • 9-24 DS - - 9-9-9- 1.5 • • • 24 DS - - 9-10- 1.5 • • • 9-27 DS - - 11-11- 1.5 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 27
) - 1.65 6GB DS - - (3x2GB) 9-9-9- 27 4GB DS Hynix H5TQ2G8 9-9-9- - 3BFRH9C 27 6GB DS - - (3x2GB) 8-9-8- 1.65 24 4GB SS - - (2x2GB) 10-10- 1.5 10-27 4GB DS 24 • • • • • • • • • • • • • • • • • • • • • • • • Chapter 1 ASUS SABERTOOTH 990FX R2.0 1-13 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 28
- - 9-10-9-27 DS - - 9-10-9-27 DS - - 9-9-9-27 DS - - DS - - 10-1110-30 9-10-9-28 DS - - 9-10-9-28 DS - - - DS - - 9-11-9-27 DS - - 9-11-9-27 DS Hynix H5TC2G8 9-11-9-27 3BFRH9A Voltage 1.55~ 1.75 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.65 1.65 1.65 1.65 DIMM socket support - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 29
AMD (4x4GB) 6GB DS (3x2GB) 6GB DS (3x2GB) 6GB DS ( - 8-8-8-24 (continued on the next page) Voltage - DIMM socket support (Optional) 124 • • • - • • • 1.55~ • • • 1.5 • • • 1.5 • • • 1.5 • • • 1.6 • • • 1.65 • • • Chapter 1 ASUS SABERTOOTH 990FX R2.0 1-15 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 30
(XMP) EK Memory EKM324L28BP8-I1 6(XMP) EK Memory EKM324L28BP8-I1 6( 4GB DS (2x2GB) 12GB DS (3x4GB) 6GB DS (3x2GB) 6GB DS (3x2GB) 16GB DS (4x4GB) 24GB - 9-9-9-24 - - 9-9-9-24 - - 9-9-9-28 - - 7-7-7-24 Good Ram KING MAX KING MAX - GF1008 KC-JN N/A N/A - 9-9-9-28 9-9-9-28 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 31
6G X(XMP) 6GB DS (3x2GB support (Optional) 1 2 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Chapter 1 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 32
T3D1288R T-16 H5TC2G83 BFRH9A TK483PC W3 K4B2G084 6C D9PFJ K4B2G084 6C 8-8-8-24 9-9-9-24 - Voltage 1.65 1.5 - DIMM socket support (Optional) 1 2 4 • • • • • • • • • • • • • • • • • DDR3 1333 MHz capability Vendors Part No. Size SS/DS Chip Brand Chip NO. Timing A-DATA - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 33
on the next page) DIMM socket support (Optional) 1 2 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Chapter 1 ASUS SABERTOOTH 990FX R2.0 1-19 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 34
ICD77 D9LGK 9 - Hynix H5TQ2G83B 9 - FR Micron D9LGK 9 - Hynix H5TQ2G83CF - - RH9C Micron D9LGK 9 - DIMM socket support (Optional) 1 2 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Chapter 1 1-20 Chapter 1: Product introduction - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 35
• ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. Chapter 1 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 36
Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Chapter 1 Slot No. 1 2 3 4 5 6 Slot Description PCIe 2.0 x16_1 slot (single at x16, dual at x16/x16, triple at x16/x8/x8 mode) PCIe - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 37
fan to the motherboard motherboard A B C PCIe x16_1 shared - - PCIe x16_2 shared - - PCIe x16_3 shared - - PCIe x16_4 - - - PCIe x1_1 - - - ASM eSATA - - - ASM SATA SATA [Brown] - - - Onchip Audio - shared - - - - - - shared Chapter 1 ASUS SABERTOOTH 990FX R2.0 1-23 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 38
up due to BIOS overclocking, press the MemOK! switch to boot and load the BIOS default settings. A message will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from the ASUS website at - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 39
the BIOS directly. • Turn off your system using the power-on button to allow your system to go through POST (without entering the BIOS) when you reboot your system. • Refer to section 3.7 Boot Menu for details about setting the DirectKey default function. Chapter 1 ASUS SABERTOOTH 990FX R2.0 1-25 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 40
need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values. • Due to the chipset behavior, AC power - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 41
during POST (Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drives. If an error is found, the critical component's LED stays lit up until the problem is solved. 2. Standby Power LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 42
RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.5.4 SATA Configuration for details. • Before creating a RAID set, refer to section 5.1 RAID configurations or the manual bundled in the motherboard support DVD. • When creating a RAID set, set the - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 43
additional USB 3.0 ports, and complies with the USB 3.0 specificaton that supports up to 480 MBps connection speed. If the USB 3.0 front panel cable is available from your system chassis, with this USB 3.0 connector, you can have a front panel USB 3.0 solution. Chapter 1 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 44
4. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 45
the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. The USB 2.0 module is purchased separately. Chapter 1 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 46
6. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 47
! • The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. • If you install two VGA cards, we recommend that you plug the rear chassis fan cable to the motherboard connector labeled CHA_FAN1 or CHA_FAN2 for better thermal environment. Chapter 1 ASUS SABERTOOTH 990FX R2.0 1-33 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 48
you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • If you want to connect a high-definition or an AC'97 front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 49
system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. Chapter 1 ASUS SABERTOOTH 990FX R2.0 1- - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 50
you to hear system beeps and warnings. • ATX power button/soft-off button (2-pin PWRSW) This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 51
cable that supports DirectKey, from the chassis to this connector on the motherboard. Ensure that your chassis comes with the button cable that supports the DirectKey feature. Refer to the technical documentation that came with the chassis for details. ASUS SABERTOOTH 990FX R2.0 1-37 Chapter - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 52
Chapter 1 1-38 Chapter 1: Product introduction - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 53
system 2 2.1.1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. 1. Install the ASUS Q-Shield to the chassis rear I/O panel. Chapter 2 ASUS SABERTOOTH 990FX R2.0 2-1 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 54
2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. Chapter 2 2-2 Chapter 2: Getting started - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 55
3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. ASUS SABERTOOTH 990FX R2.0 2-3 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 56
2.1.2 CPU installation The AMD AM3+ socket is compatible with AMD AM3+ and AM3 processors. Ensure you use a CPU designed for the AM3+ socket. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 1 2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 57
2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. To install the CPU heatsink and fan assembly 1 Chapter 2 ASUS SABERTOOTH 990FX R2.0 2-5 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 58
Chapter 2 2 3 4 2-6 5 Chapter 2: Getting started - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 59
2.1.4 1 DIMM installation 2 3 To remove a DIMM B A ASUS SABERTOOTH 990FX R2.0 2-7 Chapter 2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 60
2.1.5 1 ATX Power connection 2 OR OR Chapter 2 2-8 Chapter 2: Getting started - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 61
2.1.6 1 SATA device connection OR 2 OR Chapter 2 ASUS SABERTOOTH 990FX R2.0 2-9 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 62
2.1.7 Front I/O Connector To install ASUS Q-Connector 1 2 IDE_LED+ IDE_LED- IDE_LED PWR Ground Reset Ground POWER SW RESET SW To install USB 2.0 connector To install front panel audio connector Chapter 2 USB 2.0 To install USB 3.0 connector USB 3.0 2-10 AAFP Chapter 2: Getting started - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 63
2.1.8 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2 ASUS SABERTOOTH 990FX R2.0 2-11 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 64
seconds, and the BIOS is updated automatically. To use USB BIOS Flashback: 1. Place the bundled support DVD to the optical drive and install the USB BIOS Flashback Wizard. Follow the onscreen instructions to complete the installation. You can also download the BIOS from ASUS official website www - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 65
PDIF Out port 6. External SATA ports 7. USB 2.0 ports 3, 4, 5, and 6 8. USB 3.0 ports 3 and 4 9. USB BIOS Flashback button 10. USB 2.0 ports 1 and 2 11. Audio I/O ports** * and **: Refer to the tables on the next page for LAN port LEDs, and audio port definitions. ASUS SABERTOOTH 990FX R2.0 2-13 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 66
and better performance for your USB 3.0 devices. • If you want to use the hot-plug function of the external SATA ports, you have to set the ASM1061 Storage Controller item in the BIOS setting to [Enabled] and install the ASM1061 Controller Driver from the motherboard support DVD. Refer to section - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 67
2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers Chapter 2 ASUS SABERTOOTH 990FX R2.0 2-15 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 68
Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Chapter 2 2-16 Chapter 2: Getting started - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 69
screen. If you do not see anything within 30 seconds from the time you turned on the power, the system may have failed a power-on test. Check the jumper settings and connections or call your retailer for assistance. ASUS SABERTOOTH 990FX R2.0 2-17 Chapter 2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 70
four short beeps Description VGA detected Quick boot set to disabled No keyboard detected No memory detected No VGA detected Hardware component failure 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 3. 2.5 Turning off the computer While the - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 71
a new system component that requires further BIOS settings or update. Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-1 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 72
changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. See section 1.2.6 Onboard buttons and switches for information on how to erase the RTC RAM via the Clear CMOS button. • The BIOS setup program does not support the bluetooth devices. BIOS menu screen - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 73
[03/25/2012] SABERTOOTH 990FX R2.0 BIOS Version : 0202 CPU Type : AMD Phenom(tm) II X4 965 Processor Total Memory : 2048 MB (DDR3 1333MHz) Exit/Advanced Mode Build Date : 05/08/2012 Speed : 3400 MHz English Temperature Voltage Fan Speed CPU +113.0ºF/+45.0ºC CPU 1.248V 5V 5.160V - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 74
Tool Exit For changing the basic system configuration For changing the overclocking settings For changing the advanced system settings For displaying the system temperature, power status, and changing the fan settings. For changing the system boot configuration For configuring options for special - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 75
a submenu. Press or use the USB mouse to click this button to return to the Pop-up window Select a menu item and press to display a pop-up window with the BIOS setup program. Use the navigation keys to select items in the menu and change the settings ASUS SABERTOOTH 990FX R2.0 3-5 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 76
, time, language, and security settings. UEFI BIOS Utility - Advanced Mode Exit Main Ai Tweaker Advanced Monitor BIOS Information BIOS Version Build Date 0211 x64 5/30/2012 CPU Information AMD(R) Phenom(TM) II X4 965 Processor Memory Information Total Memory 2048 MB (DDR3 1333MHz - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 77
BIOS setup program. To set set a password, this item shows Installed. To set a user password: 1. Select the User Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. Chapter 3 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 78
section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display other BIOS items. UEFI BIOS Utility - Advanced Mode Exit Main Ai Tweaker Advanced Monitor Boot Tool Current CPU Speed Target CPU Speed Current Memory Frequency Current NB Frequency - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 79
only when you set the Ai Overclocking Tuner to [Manual]. CPU Bus Frequency [Auto] Allows you to set the CPU and VGA frequency. set the HyperTransport link speed. Configuration options: [Auto] [800MHz] [1000MHz] [1200MHz] [1400MHz] [1600MHz] [1800MHz] [2000MHz] Chapter 3 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 80
overclocks the frequency and voltage of CPU and DRAM for enhancing the system performance. Configuration options: [OK] [Cancel] DRAM Timing Control The sub-items in this menu allow you to set ] DRAM RAS# ACT Time [Auto] Configuration options: [Auto] [15] - [30] Chapter 3 3-10 Chapter 3: BIOS setup - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 81
[5] [6] [7] [8] [10] [12] DRAM REF 10] DRAM READ to READ Timing [Auto] Configuration options: [Auto] [2] - [10] DRAM Refresh Rate [Auto] Configuration options: [Auto] [Every 7.8ms] [Every 3.9ms] DRAM COMMAND Rate [Auto] Configuration options: [Auto] [1T] [2T] Chapter 3 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 82
DRAM Driving Control Allows you to set the primary, secondary, and tertiary memory timings. DCT0 Information CKE drive strength [Auto] Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x] options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60 ohms +/20%] Chapter 3 3-12 Chapter 3: BIOS setup - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 83
the ASUS optimized phase tuning profile. [Extreme] Proceeds the full phase mode. [Manual Adjustment] Allows manual adjustment. DO NOT remove the thermal module when switching to Extreme and Manual Mode. The thermal conditions should be monitored. Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-13 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 84
[Fast] This item appears only when you set the CPU Power Phase Control item to [Manual Adjustment]. Configuration options: [Ultra Fast] [Fast] [Medium] [Regular] CPU Voltage Frequency [Auto] Frequency switching affects the VRM transient response, and the thermal component. Higher frequency - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 85
CPU Offset Voltage [Auto] This item appears only when you set the CPU Voltage item to [Offset Mode] and allows you to set the CPU offset voltage. Use the and keys to adjust the value. The values range from 0.006250V to 0.700000V with a 0.006250V interval. Chapter 3 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 86
CPU/NB Offset Voltage [Auto] This item appears only when you set the CPU & NB Voltage item to [Offset Mode] and allows you to set the CPU/NB Allows you to set the VDD PCIE voltage. The values range from 1.10V to 2.20V with a 0.005V interval. VDDR [Auto] Allows you to set the memory's voltage. The - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 87
settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. UEFI BIOS Utility - Advanced Mode Exit Main Ai Tweaker > CPU Configuration > North Bridge > South Bridge > SATA Configuration > USB Configuration > CPU . Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-17 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 88
automatically detects. The items in this menu may vary based on the CPU installed. UEFI BIOS Utility - Advanced Mode Exit Main Back Ai Tweaker Advanced Advanced\ CPU Configuration > CPU Configuration Monitor Socket0: AMD Phenom (tm) II X4 965 Processor Quad Core Running @ 3715 MHz 1400 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 89
Enable [Disabled] Allows you to enable or disable DDR power down mode. Configuration options: [Enabled] [Disabled] Memory Hole Remapping [Enabled] Allows you to enable or disable Memory Hole Remapping function. Configuration options: [Enabled] [Disabled] Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-19 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 90
[Disabled]: Unganged mose. Initiate Graphic Adapter [PEG/PCI] Allows you to set which graphics controller to use as the primary boot device. Configuration options: [PCI/PEG] [PEG/PCI] 3.5.3 South Bridge Configuration UEFI BIOS Utility - Advanced Mode Main Back Ai Tweaker Advanced\ South Bridge - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 91
use the AHCI (Advabced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-21 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 92
ESP on PORT1-6 [Disabled] Allows you to set SATA port on PORT1-6 to external SATA port. Configuration options: [Disabled] [Enabled] 3.5.5 USB Configuration The items in this menu allow you to change the USB-related features. UEFI BIOS Utility - Advanced Mode Exit Main Back Ai Tweaker Advanced - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 93
CPU cores. Configuration options: [Auto] [Manual] The following items appear only when you set the CPU Core Activation to [Manual]. 2nd Core - 4th Core [Enabled] Allows you to enable or disable the core's activation. Configuration options: [Enabled] [Disabled] Chapter 3 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 94
to view the other BIOS items. UEFI BIOS Utility - Advanced Mode Exit USB 3.0 Controller (USB3_12) Asmedia USB 3.0 Controller (USB3_34) Asmedia USB 3.0 Controller (Front) Asmedia USB 3.0 Battery Charging Support [Enabled] This item appears only when you set the previous item to [Enabled] and allows - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 95
disable the serial port (COM). Configuration options: [Enabled] [Disabled] Change Settings [IO=3F8h; IRQ=4] Allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-25 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 96
to [Enabled]. Azalia Front Panel [HD] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC'97 [HD - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 97
user-configurable with set values. 3.5.9 Network Stack UEFI BIOS Utility - Advanced set the Network Stack to [Enabled]. Ipv4/Ipv6 PXE Support [Enabled] Allows you to enable or disable the Ipv4/Ipv6 PXE boot option. Configuration options: [Disabled Link] [Enabled] Chapter 3 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 98
the fan is not connected to the motherboard, the field shows N/A. Select [Ignore] if you do not wish to display the detected speed. CPU Q-Fan Control [Enabled] [Disabled] Disables the CPU Q-Fan control feature. [Enabled] Enables the CPU Q-Fan control feature. Chapter 3 3-28 Chapter 3: BIOS - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 99
. Chassis Fan Speed Low Limit 1/4 [600 RPM] This item appears only when you enable the Chassis Q-Fan Control feature and allows you to disable or set the chassis fan warning speed. Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] Chapter 3 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 100
maximum chassis fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The following four items appear only when you set Chassis Fan Profile to [Manual]. Chassis Upper Temperature [70] Use the and keys to adjust the upper limit of the CPU temperature. The - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 101
without going into the BIOS setup. When set to [Go to BIOS Setup] and the computer is on, the system will shut down when you press the DirectKey button. Press the DirectKey button again or the power button to reboot and go directly into the BIOS setup. Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-31 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 102
Sets Advanced Mode as the default screen for entering the BIOS setup program. [EZ Mode] Sets EZ Mode as the default screen for entering the BIOS devices installed in the system. • To access Windows OS in Safe Mode, do any of the following: • Press when ASUS Logo appears. • Press after - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 103
you to run ASUS EZ Flash 2. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more details, refer to section 3.10.2 ASUS EZ Flash 2 utility. Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-33 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 104
DRAM SPD information. UEFI BIOS Utility - Advanced Mode Main Back Ai Tweaker Tool\ ASUS SPD Information > Advanced Monitor to CAS# (tRCD) RAS# Precharge(tRP) tRAS tRC 1333 1.500 9 9 9 24 33 tWR 10 tRRD 4 tRFC 74 tWTR 5 tRTP 5 tFAW 20 Boot DIMM Slot number Tool →←: Select Screen - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 105
settings, press , and then select Yes. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/ CPU configuration and BIOS version. Chapter 3 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 106
BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Exit Load Optimized Defaults Save Changes & Reset Discard Changes & Exit ASUS , a confirmation window appears. Select Yes to discard changes and exit. ASUS EZ Mode This option allows - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 107
and update the motherboard BIOS in Windows® environment. • ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP). • This utility is available in the support DVD that comes with the motherboard package. Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-37 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 108
ASUS Update To launch ASUS Update, click Update > ASUS Update on the AI Suite II main menu bar. Quit all Windows® applications before you update the BIOS using this utility. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. From the ASUS Update screen, select Update - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 109
to complete the update process. • The screenshots in this section are for reference only. The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS SABERTOOTH 990FX R2.0 3-39 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 110
the USB port. 2. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash Utility and press to enable it. ASUSTek EZ Flash BIOS ROM Utility V00.75 Flash Info MODEL: SABERTOOTH 990FX R2.0 VER: 0202 fs0:\ Drive fs0:\ fs1:\ Folder Info 03/15/12 10:23p - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 111
. Do not save the BIOS file and BIOS Updater to a hard disk drive or USB flash drive in NTFS format. • Do not save the BIOS file to a floppy disk due to low disk capacity. 3. Turn off the computer and disconnect all SATA hard disk drives (optional). Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-41 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 112
BIOS file and BIOS Updater to the USB port. 2. Boot your computer. When the ASUS Logo appears, press to show the BIOS Boot Device Select Menu. Insert the support DVD into the optical drive and select the optical drive as the boot device. Please select boot device: SATA: XXXXXXXXXXXXXXXX USB - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 113
] Exit 3. Press to switch between screen fields and use the keys to select the BIOS file and press . BIOS Updater checks the selected BIOS file and prompts you to confirm BIOS update. Are you sure to update BIOS? Yes No Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-43 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 114
updating BIOS. • Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3 of your motherboard user manual for details. • Ensure to connect all SATA hard disk drives after updating the BIOS - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 115
Click an icon to display DVD/ motherboard information Click an item to install Chapter 4 If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click ASSETUP.EXE to run the DVD. ASUS SABERTOOTH 990FX R2.0 4-1 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 116
the support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening the files. 1. Click Manual tab. Click ASUS Motherboard Utility Guide from - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 117
models. • The screeshots of AI Suite II in this user manual are for reference only. The actual screenshots vary with models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-3 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 118
speeds based on your selected or customized fan profile for each component, keeping the system stable and cool. Launching Thermal Radar To launch Thermal Radar, click Thermal Radar on the AI Suite II main menu bar. The software screen captures in this manual are for reference only. Using the Thermal - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 119
the fan that you want to assign a preset fan profile to. 3. Read the introduction and notice of the selected fan. Click Setting. 4. Select a fan profile in the Profile Name dropdown list and click Apply. Click the CPU or CHA icon to configure the system fans. Chapter 4 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 120
for a 100% combination and click Apply. For example, you assign 60% to motherboard, 20% to VCORE, and 20% to VCCSA and click Apply, Thermal Radar calculates the overall temperature of the monitored components to automatically set the required fan speed. Chapter 4 4-6 Chapter 4: Software support - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 121
to save and apply the changes or click Undo to cancel the fan settings made. Click to undo the changes made Click to select the CHA_FAN4 setting Adjust the slider to set RPM percentage of the User fan setting Click to save and apply the changes made Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-7 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 122
between your computer and mobile device. • Remote GO! is supported only on Windows® 7. • All devices using the Remote GO! functions bar. Allows you to set a password Remote GO! menu Application help Chapter 4 Remote GO! functions • DLNA Media Hub: Provides support to the latest DLNA standard - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 123
iTunes store. For Android devices, download the Wi-Fi GO! Remote from Google Play Store or from ASUS support DVD. Launching Wi-Fi GO! Remote 1. Turn on your mobile device's wireless connection. Ensure that computer you want to connect to your mobile device. Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-9 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 124
reference only and may vary with the mobile device's operating system. Below are the supported screen resolution of your mobile devices: Screen type Low Density Medium Density High Density ( (320, xhdpi) 640 x 960 2048 x 1536 2560 x 1536 2560 x 1600 4-10 Chapter 4: Software support Chapter 4 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 125
launch Windows Media Windows® 7 support the DLNA Media Hub function. • Keep the Windows Media Player open. Ensure that your media file formats supported on Windows Media Player and DLNA playback devices. 3. Click any of the tabs to select your preferred media file type. ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 126
Save. To add as a new playlist, key in your profile name and click Save. 5. To delete playlist, select the profile and click . 4-12 Chapter 4: Software support - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 127
and click Save. To add as a new playlist, key in your profile name and click Save. 5. To delete playlist, select the profile and click . Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-13 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 128
. To add as a new playlist, key in your profile name and click Save. 5. To delete playlist, select the profile and click . Chapter 4 4-14 Chapter 4: Software support - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 129
's desktop and remotely operate your computer in real-time from your mobile device. Using the Remote Desktop 1. From the main screen, click Remote Desktop. 2. Click Setting. Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-15 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 130
4 The Wi-Fi GO! Remote's user interface shown above is for reference only and may vary with the mobile device's operating system. 4-16 Chapter 4: Software support - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 131
Enable to receive files from PC. 3. Tap Enter to send files to PC. Destination path for the files transferred from desktop to mobile device Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-17 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 132
system. Securing your computer for Wi-Fi GO! Remote functions Remote GO! Settings allows you to create a password for your computer. To create a password Key in your password Click to go back to main menu Click to apply settings made • When you launch the Wi-Fi GO! Remote, the application prompts - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 133
after Windows starts. Load profile Target values Current values Click to show settings Click to restore all startup settings Save the current settings as a new profile Voltage Adjustment bars Undoes all the changes Applies all the changes immediately Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-19 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 134
Using the Advanced Mode Click the Advanced Mode tab to adjust the advanced voltage settings. Advanced mode Target values Current values Click to restore all startup settings Voltage Adjustment bars Undoes all the changes Applies all the changes immediately Chapter 4 4-20 Chapter 4: Software - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 135
• Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Ratio function in TurboV. Refer to the BIOS chapter of your motherboard user manual for details. • The CPU Ratio bars show the status of the CPU cores, which vary with your CPU model. Chapter 4 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 136
ASUS menu bar. Select CPU Power or DRAM Power to adjust the power control settings. CPU Power 5 6 overclocking performance but increases the CPU and VRM thermal conditions. 2 CPU Current Capability CPU Current Capability provides wider total power range for overclocking. A higher value setting - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 137
may vary depending on your CPU specification. • DO NOT remove the thermal module. The thermal conditions should be monitored. Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS SABERTOOTH 990FX R2.0 4-23 Chapter 4 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 138
for system stability or to increase the overclocking range. 3 DRAM Power Phase Control Set Manual Adjustment to faster phase response to increase CPU and DRAM specification. • DO NOT remove the thermal module. The thermal conditions should be monitored. Chapter 4 4-24 Chapter 4: Software support - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 139
Recorder on the AI Suite II main menu bar. Using Sensor Recorder Click Voltage/ Temperature/ Fan Speed tabs for the status you want to monitor. Colored lines will automatically appear on the diagram to indicate the immediate changes in the system status. Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-25 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 140
to need. 2. Click Start Recording to start measuring and recording each sensor. 3. To stop recording, click Recording again. 4. To track the recorded contents, set Type/ Date/ Select display items to display the history details. Click Monitor > Sensor on the AI Suite II main menu bar and the system - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 141
or compatible device. • ** Actual charging speeds may vary depending on the charging rate and specifications of your USB device. • To ensure normal charging function, disconnect and reconnect your USB device every time you enable or disable Ai Charger+. Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-27 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 142
to Turbo mode or UASP mode (if UASP is supported by the USB 3.0 device). 2. You can manually switch the USB 3.0 mode back to Normal mode at any time. Chapter 4 • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. • Use the - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 143
the updated BIOS Before you start downloading, ensure that you have installed the USB storage device to your computer's USB port. 1. Click Check for New BIOS Update to check for the latest BIOS version. Wait for the system to check the latest BIOS firmware. Chapter 4 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 144
2. From the Save to dropdown list, select the USB storage device that you want to save the BIOS file to, then click Download. 3. When the download process is completed, click OK to exit. Chapter 4 4-30 Chapter 4: Software support - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 145
disabled. • You may monitor the bandwidth priority from your desktop's taskbar. 3. Tick Set current network program as the highest priority to enable User Profile. 4. Select a profile and click Apply. You may also apply your personal profile in EZ Start. Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-31 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 146
settings made Click to set the current network program as the highest priority Click to select a profile Using Quick Connection Configuring the PPPoE connection settings functions, you must configure the PPPoE connection settings To configure the PPPoE settings: 1. Right-click in the taskbar, and - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 147
for name and password, certificate, etc. Click OK to complete the auto PPPoE connection settings. • You only need to configure the PPPoE connection settings once. • Obtain the necessary information about your PPPoE connection from your network provider. Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-33 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 148
automatic network connection. You can also enable the No Delay TCP function to help improve the network performance. Click to select Connection Name Tick to set the auto PPPoE connection Click to apply settings Click ON to improve network performance Chapter 4 4-34 Chapter 4: Software - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 149
, or rename your profile settings Click to set program as High/Normal/ Low priority Pre-schedule your network priorities to avoid network congestions Select a program, and click to edit your network profile Information pane of currently running programs Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-35 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 150
you to manage, save, and update the motherboard BIOS in Windows® environment. Launching ASUS Update To launch ASUS Update, click Update> ASUS Update on the AI Suite II main menu bar. Using ASUS Update Select any of these options to update the BIOS: • Update BIOS from Internet Allows you to download - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 151
boot logo of a downloaded BIOS file and update (or do not update) this BIOS to the motherboard 1. From the BIOS file field, click Browse to locate the BIOS file. 2. From the Picture File field, click Browse the image for your boot logo, then click Next. Chapter 4 ASUS SABERTOOTH 990FX R2.0 4-37 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 152
Next. 5. Click Flash to update the boot logo. 6. When Audio Jack) technology for all audio ports, eliminating cable connection errors, and giving users plug and play convenience. Follow the installation wizard to install the Realtek® Audio Driver from the support DVD that came with the motherboard - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 153
Control settings window Exit button Minimize button Information button • Refer to the software manual in the support DVD or visit the ASUS website at www. asus.com for detailed software configuration. • To play Blu-Ray disc, make sure to use an HDCP compliant monitor. ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 154
Chapter 4 4-40 Chapter 4: Software support - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 155
5 5.1 RAID configurations The motherboard comes with the AMD® SB950 chipset that allows you to configure Serial ATA hard disk drives as RAID sets. The motherboard supports the following RAID configurations: RAID 0, RAID 1, RAID 10 and RAID 5. • You must install Windows® XP Service Pack 3 or later - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 156
You must enable the RAID function in the BIOS Setup before creating RAID sets using SATA HDDs. To do this: 1. Enter the BIOS Setup during POST. 2. Go to the Advanced menu > SATA Configuration, and then press . 3. Set the SATA Mode item to [RAID Mode]. 4. Save your changes, and then exit the - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 157
. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. To create a RAID volume using more than four hard disk drives, ensure that the SATA connectors 5/6 are set to [RAID] mode. Chapter 5 ASUS SABERTOOTH 990FX R2.0 5-3 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 158
press any key to continue. Enter the LD name here: 8. Press + to erase the MBR, or you may press any key to abort the settings. Fast Initialization Option has been selected. It will erase the MBR data of the disks. - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 159
messages: Press Ctrl-Y to delte the data in the disk! or press any other key to abort... Press + to delete the RAID volume. Chapter 5 ASUS SABERTOOTH 990FX R2.0 5-5 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 160
Displaying a RAID set information To display a RAID set information: 1. In the Main Menu, press to enter the LD View / LD Define Menu function. 2. Select a RAID item and press to display its information. - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 161
Intel AHCI/RAID Driver Disk to create a RAID driver disk. 5. Select USB floppy disk drive as the destination disk. 6. Follow the succeeding screen instructions to complete the process. Write-protect the floppy disk to avoid a computer virus infection. Chapter 5 ASUS SABERTOOTH 990FX R2.0 5-7 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 162
version. Click OK. 4. Follow the succeeding screen instructions to complete the installation. Before loading the RAID driver from a USB flash drive, you have to use another computer to copy the RAID driver from the support DVD to the USB flash drive. Chapter 5 5-8 Chapter 5: RAID configurations - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 163
right-click xxxxxx USB Floppy, and then select Properties from the pop-up window. The name of the USB floppy disk drive driver disk to locate the file txtsetup.oem. 6. Double-click the file. A window appears, allowing you to select the program for opening the oem file. ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 164
following line to the bottom of the two sections: id = "USB\VID_xxxx&PID_xxxx", "usbstor" [HardwareIds.scsi.iaAHCI_ DesktopWorkstationServer] id= "PCI "USB\VID_03EE&PID_6901", "usbstor" Add the same line to both sections. The VID and PID vary with different vendors. 10. Save and exit the file. 5-10 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 165
For Windows XP, go to Control Panel > Add/Remove Programs. For Windows 7, go to Control Panel > Programs and Features. 3. Select your current graphics card driver/s. 4. For Windows XP, select Add/Remove. For Windows 7, select Uninstall. 5. Turn off your computer. Chapter 6 ASUS SABERTOOTH 990FX R2 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 166
the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi- bridge (bundled with graphics cards) Goldfingers Chapter 6 6-2 Chapter 6: Multiple GPU support - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 167
5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately. 6. Connect a VGA or a DVI cable to the graphics card. Chapter 6 ASUS SABERTOOTH 990FX R2.0 6-3 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 168
supports the AMD® CrossFireX™ technology. Download the latest driver from the AMD website (www.amd.com). 6.1.5 Enabling the AMD® CrossFireX™ technology After installing your graphics cards and the device drivers, enable the CrossFireX™ feature through the AMD Catalyst™ Control Center in Windows - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 169
CrossFireX technology 1. In the Catalyst Control Center window, click Performance > AMD CrossFireXTM. 2. Select Enable CrossFireXTM. 3. Select a GPU combination from the drop-down list. 4. Click Apply to save and activate the GPU settings made. 2 1 3 4 Chapter 6 ASUS SABERTOOTH 990FX R2.0 6-5 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 170
fans for better thermal environment. • Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified graphics card and supported 3D application list. 6.2.2 Installing two SLI-ready graphics cards The following pictures are for reference only. The graphics cards and the motherboard - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 171
Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the NVIDIA® SLI™ technology. Download the latest driver from the NVIDIA website (www.nvidia.com). Chapter 6 ASUS SABERTOOTH 990FX R2.0 6-7 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 172
desktop and select NVIDIA Control Panel. The NVIDIA Control Panel window appears (See Step B3). B1. If you cannot see the NVIDIA Control Panel item in step (A), select Screen Resolution. B2. From the Screen Resolution window, click Advanced settings. Chapter 6 6-8 Chapter 6: Multiple GPU support - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 173
Panel window appears. Enabling SLI settings From the NVIDIA Control Panel window, select Configure SLI, Surround, PhysX. In the Quad-SLI enabled, click Maximize 3D Performance SLI to set the display for viewing SLI rendered content. When done, click Apply. Chapter 6 ASUS SABERTOOTH 990FX R2.0 6-9 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 174
Chapter 6 6-10 Chapter 6: Multiple GPU support - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 175
cause undesired operation. This equipment has been tested and found to comply with the limits for in accordance with manufacturer's instructions, may cause harmful interference to /TV technician for help. The use of shielded cables for connection of the monitor to the ASUS SABERTOOTH 990FX R2.0 A-1 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 176
Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 177
ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback asus.com/english/Takeback.htm for detailed recycling information in different regions. Appendices ASUS SABERTOOTH 990FX R2.0 A-3 - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 178
CA 94539, USA Telephone +1-812-282-3777 Fax +1-510-608-4555 Web site usa.asus.com Technical Support Telephone Support fax Online support +1-812-282-2787 +1-812-284-0883 support.asus.com ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 179
Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name : Motherboard Model name : SABERTOOTH 990FX R2.0 conform with the essential requirements of the - Asus SABERTOOTH 990FX R2.0 | SABERTOOTH 990FX R2.0 User's Manual - Page 180
Appendices A-6 Appendices
Motherboard
SABERTOOTH
990FX R2.0