Asus SABERTOOTH Z97 MARK 1 USB 3.1 User Guide

Asus SABERTOOTH Z97 MARK 1 USB 3.1 Manual

Get Asus SABERTOOTH Z97 MARK 1 USB 3.1 PDF manuals and user guides View all Asus SABERTOOTH Z97 MARK 1 USB 3.1 manuals
Add to My Manuals
Save this manual to your list of manuals

Asus SABERTOOTH Z97 MARK 1 USB 3.1 manual content summary:

  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 1
    Motherboard SABERTOOTH Z97 MARK 1/USB 3.1
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 2
    service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL from http://support.asus.com/download problems
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 3
    About this guide...vii SABERTOOTH Z97 MARK 1/USB 3.1 specifications summary ix Package contents...xiii Installation tools and components xiv Chapter 1: Product Introduction 1.1 Special features 1-1 1.1.1 Product highlights 1-1 1.1.2 "Ultimate COOL" Thermal Solutions 1-2 1.1.3 "TUF Engine
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 4
    2.3 Motherboard rear and audio Agent Configuration 3-37 3.6.5 USB Configuration 3-38 3.6.6 Platform Intel(R) Rapid Storage Technology 3-45 3.7 Monitor menu 3-46 3.8 Boot menu 3-51 3.9 Tool menu 3-57 3.9.1 ASUS EZ Flash 2 Utility 3-57 3.9.2 ASUS O.C. Profile 3-58 3.9.3 ASUS
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 5
    Update 3-61 3.11.2 ASUS EZ Flash 2 3-62 3.11.3 ASUS CrashFree BIOS 3 3-63 Chapter 4: Software support 4.1 Installing an operating system 4-1 4.2 Support DVD information 4-1 4.2.1 Running the support DVD 4-1 4.2.2 Obtaining the software manuals 4-3 4.3 Software information 4-4 4.4 AI
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 6
    Contact a Qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with . • If you encounter technical problems with the product, contact a Qualified service technician or your retailer. vi
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 7
    you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 8
    note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 9
    SABERTOOTH Z97 MARK 1/USB 3.1 specifications summary CPU Chipset Memory Expansion slots VGA Multi-GPU support LAN LGA1150 socket for the 4th, New 4th, and 5th generation Intel® Core™ i7 / Intel® Core™ i5 / Intel® Core™ i3, Pentium®, and Celeron® processors Supports 22nm CPU Supports Intel® Turbo
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 10
    SABERTOOTH Z97 MARK 1/USB 3.1 specifications summary Storage Audio USB Exclusive TUF Features Intel® Z97 Express Chipset with RAID 0, 1, 5, 10 and Intel® Rapid Start Technology 13 support - 1 x SATA Express port (black at the bottom, compatible with 2 x SATA 6.0 Gb/s ports) - 4 x SATA 6.0 Gb/s
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 11
    SABERTOOTH Z97 MARK 1/USB 3.1 specifications summary Exclusive TUF Features Other Special Features Rear Panel I/O Ports Internal I/O connectors "SAFE & Stable!" Guardian Angel - Dust Defenders with connector caps and rear I/O dust filter - TUF ESD Guards - MemOK! - USB 3.1 Boost featuring speedy
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 12
    SABERTOOTH Z97 MARK 1/USB 3.1 specifications summary Internal I/O connectors BIOS Features Manageability Support DVD contents Form factor 1 x CPU Fan connector (moss green) supports both 3-pin (DC mode) and 4-pin (PWM mode) CPU coolers control with auto detection support 1 x CPU Optional Fan
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 13
    for the following items User Manual ASUS SABERTOOTH Z97 MARK 1/ USB3.1 motherboard Technical documentations, certification and warranty card Support DVD 4 x Serial ATA 6.0 Gb/s cables 1 x ASUS SLI™ bridge connector (7 cm) 1 x ASUS Q-Shield 1 x 2-in-1 ASUS Q-Connector kit 1 x 35 mm Assistant
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 14
    Philips (cross) screwdriver PC chassis Power supply unit Intel® LGA1150 CPU Intel® LGA1150 compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package. xiv
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 15
    enjoyment. SATA Express support SATA Express provides faster data transfer speeds of up to 10 Gb/s, allowing your system to catch up with the speed of the SSDs. It also features backward compatibility with up to two SATA drives of the same speed. Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-1
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 16
    energy use low. Complete USB 3.0 integration This motherboard offers you the strategic USB 3.0 accessibility for both USB 2.0. Extra SATA 6.0 Gb/s Support The Intel® Z97 Express Chipset natively supports the next-generation Serial ATA (SATA) interface, delivering up to 6.0 Gb/s data transfer. ASUS
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 17
    the motherboard's lifespan. MemOK! MemOK!, the remarkable memory rescue tool, allows you to simply press a button to patch memory issues, ensure memory boot compatibility, determine fail-safe settings, and dramatically improve the system's bootup. Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-3
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 18
    with dual selectable modes and native support for hard drives larger than 2.2 TB. ASUS UEFI BIOS includes the following new ASUS Q-shield ASUS Q-Shield's special design makes it convenient and easy to install on your motherboard. With better electric conductivity, it ideally protects your motherboard
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 19
    to control files and sync them all across cloud services in a few clicks. • ASUS Media Streamer: Allows you to stream media files to a DLNA-supported devices. • Remote Desktop: Allows you to view to switch back and forth between different utilities. Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-5
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 20
    4K/2K resolution visuals through a single cable. Supporting HDCP copy protection such as HD DVD and blu highest quality home theater experience. ErP Ready The motherboard is European Union's Energy-related Products (ErP) . This is in line with ASUS vision of creating environment-friendly and
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 21
    component. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-7
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 22
    1.2.2 Motherboard layout Chapter 1 Refer to 1.2.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. 1-8 Chapter 1: Product introduction
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 23
    pin ASST_FAN1-2, 4-pin ASST_FAN3) 3. LGA1150 CPU socket 4. DDR3 DIMM slots 5. MemOK! button 6. USB 3.0 connector (20-1 pin USB3_34) 7. Intel® Z97 Serial ATA 6.0 Gb/s connectors (7-pin 1-27 1-26 1-37 1-36 1-30 1-32 1-34 1-38 1-34 1-31 1-37 Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-9
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 24
    the damage is shipment/ transit-related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1150 socket. • The product warranty does not cover damage to the socket contacts resulting
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 25
    The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 26
    According to Intel® CPU more memory on the motherboard, the actual usable marked value. To operate at the vendor-marked or at a higher frequency, refer to section Ai Tweaker menu for manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 27
    SABERTOOTH Z97 MARK 1/USB 3.1 Motherboard Qualified Vendors Lists (QVL) DDR3 3200 MHz capability Vendors Part No. Size SS/ 1.65V 12-14-14-35 1.65V 12-14-14-36 1.65V DIMM socket support (Optional) 2 4 • • • • • • • • • • • • • • Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-13
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 28
    65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V DIMM socket support (Optional) 24 DDR3 2666 MHz capability Vendors Part No. Size SS/ Chip Chip DS Brand NO. Apacer 78.BAGFF.AFC0C(XMP) 8GB ( 2x 4GB ) DS
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 29
    TX2400KLN-8GK(XMP) 8GB ( 2x 4GB ) SS/ DS Chip Brand Chip NO. Timing Voltage DIMM socket support (Optional) 124 SS - - 11-13-13-35 1.65 • • • DS - - 11-13-13 -11-13- - 13-32 - 2400-11-12- 1.6 11-29 • • • • • • • • • Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-15
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 30
    1.65 1.65 1.5 1.65 1.5 1.5 1.5 1.65 1.5 1.5 1.65 1.5 1.6 1.6 DIMM socket support (Optional) 124 • • • • • • • • • • • • • • • • • • • • • • • • • • • • - 9-9-9-27 9-9-9-28 Voltage 1.65 1.65 DIMM socket support (Optional) 124 • • • • • • • •
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 31
    1.5 9-27 - 9-9-9-27 1.5 DIMM socket support (Optional) 124 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • (continued on the next page) Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-17
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 32
    1.65 • • • - • • • - • • • DDR3 1600 MHz capability Vendors Part No. Size SS/ Chip DS Brand Chip NO. Timing Voltage DIMM socket support (Optional) 1 2 4 A-DATA AD3U1600W4G11 4GB SS A-DATA 3WCD-1211A 11-11-11-28 - • • • A-DATA AD3U1600W8G11 8GB DS A-DATA 3WCD-1211A 11
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 33
    SS/ DS Chip Brand Chip NO. Timing DS Apacer AM5D5908DEQSCK - Voltage 1.65 DIMM socket support (Optional) 124 ••• SS Apacer AM5D6008BQQSCK 11-11- 11-28 DS Apacer AM5D6008BQQSCK 11-11 - 1.5 10-27 8-8-8-24 1.5 (continued on the next page) Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-19
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 34
    -DG(XMP) 2GB SS/ Chip DS Brand DS DS SS Elixir Chip NO. - Timing 1600-99-9-24 8-8-8-24 Voltage 1.5 1.5 DIMM socket support (Optional) 124 ••• ••• N2CB2G80GN-DG 9-9-9-28 - ••• Elixir M2X4G64CB8HG5N-DG(XMP) 4GB DS Elixir N2CB2G80GN-DG 9-9-9-28 - ••• G.SKILL F3-12800CL9D-8GBSR2(XMP) 8GB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 35
    -16 DS UMAX U2S96D30TP-16 - - 11-11-11- 28-1 11-11-11- 28-2 1600-11- 11-11-28 1600-11- 11-11-28 DIMM socket support (Optional) 124 ••• ••• ••• Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-21
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 36
    ( 2x DS 4GB ) INNODISK M3UN-2GHJBC09 2GB SS Hynix Chip NO. Timing Voltage DIMM socket support (Optional) 124 23EY4587MB3H - 1.5 • • • 23EY4587MB3H - 1.5 • • • AM5D5908CEHSBG 9 - • • • 302G08-DJ1C - - • • • 304G08-DJ1B 9-10- - 10-26 • • • 304G08-DJ1B 9-9-9-24
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 37
    . • ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 38
    Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Chapter 1 Slot No. 1 2 3 4 5 6 Slot Description PCIe 2.0 x1_1 slot PCIe 3.0/2.0 x16_1 slot PCIe 2.0 x1_2 slot PCIe 3.0/2.0 x16_2 slot PCIe 2.0 x1_3
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 39
    better thermal environment. IRQ assignments for this motherboard PCIe x16_1 PCIe x16_2 PCIe x16_3 PCIe - - - - shared - - - - - shared - - - - Realtek 8111GR - - - shared - - - - High Definition Audio - - - - - - shared - Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-25
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 40
    with the motherboard may cause system tested. If the installed DIMMs still fail to boot after the whole tuning process, the DRAM_LED lights continuously. Replace the DIMMs with ones recommended in the Memory QVL (Qualified Vendors Lists) in this user manual or on the ASUS website at www.asus
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 41
    is required to enable C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before rebooting the system. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-27 Chapter 1
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 42
    2. CPU Over Voltage jumper (3-pin CPU_OV) The CPU Over Voltage jumper allows you to set a higher CPU voltage for a flexible overclocking system, depending on the type of the installed CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage setting,
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 43
    LEDs The POST State LEDs provide the status of these key components during POST (Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drives. If an error is found, the critical component's LED stays lit up until the problem is solved. Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-29
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 44
    create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z97 chipset. Chapter 1 • These connectors are set to [AHCI to section 5.1 RAID configurations or the manual bundled in the motherboard support DVD. 1-30 Chapter 1: Product introduction
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 45
    compatibility with USB 2.0. Chapter 1 • The USB 3.0 module is purchased separately. • These connectors are based on xHCI specification. We recommend you to install the related driver to fully use the USB 3.0 ports under Windows® 7 or later Windows® OS. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-31
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 46
    4. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 47
    motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, dark brown) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. The USB 2.0 module is purchased separately. Chapter 1 ASUS SABERTOOTH Z97 MARK
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 48
    4-pin ASST_FAN3) Connect the fan cables to the fan connectors on the motherboard. Chapter 1 • DO NOT forget to connect the fan cables to The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. • The CPU_FAN, CHA_FAN and ASST_FAN connectors support the TUF Thermal Radar 2 feature
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 49
    is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect motherboard. Connect the thermistor cable and place the sensor on the device or the motherboard's component to detect its temperature. Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 50
    down firmly until the connectors completely fit. • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W. • DO NOT forget to connect the 4-pin/8-pin EATX12 V power plug
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 51
    (20-8 pin PANEL) This connector supports several chassis-mounted functions. • System speaker. The speaker allows you to hear system beeps and warnings. • ATX power button/soft-off button (2-pin PWRSW) This connector is for the system power. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-37 Chapter 1
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 52
    . 12. DirectKey connector (2-pin DRCT) This connector is for the chassis-mounted button that supports the DirectKey function. Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard. Ensure that your chassis comes with the extra button cable that
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 53
    that supports Intel's Thunderbolt Technology, allowing you to connect up to six Thunderbolt-enabled devices and a DisplayPort-enabled display in a daisy-chain configuration. The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately. Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 54
    models, but the installation steps are the same for all models. 1. Install the ASUS Q-Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. Chapter 2 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 2-1
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 55
    3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT over tighten the screws! Doing so can damage the motherboard. 2-2 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 56
    2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1150 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1150 socket. Chapter 2 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 2-3
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 57
    2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. To install the CPU heatsink and fan assembly Chapter 2 2-4 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 58
    To uninstall the CPU heatsink and fan assembly Chapter 2 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 2-5
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 59
    2.1.4 DIMM installation Chapter 2 To remove a DIMM 2-6 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 60
    2.1.5 ATX Power connection OR OR ASUS SABERTOOTH Z97 MARK 1/USB 3.1 2-7 Chapter 2
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 61
    2.1.6 SATA device connection OR OR Chapter 2 2-8 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 62
    I/O Connector To install ASUS Q-Connector HDD LED HDD LED+ HDD LED- HDD LED PWR Ground Reset Ground POWER SW RESET SW To install USB 2.0 connector To install front panel audio connector Chapter 2 USB 2.0 AAFP To install USB 3.0 connector USB 3.0 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 2-9
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 63
    2.1.8 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2 2-10 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 64
    USB BIOS Flashback: 1. Place the bundled support DVD to the optical drive and install the USB BIOS Flashback Wizard. Follow the onscreen instructions to complete the installation. 2. Insert the USB storage device to the USB your local ASUS Service Center. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 2-11
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 65
    2.3 Motherboard rear and audio connections 2.3.1 Rear I/O connection Chapter 2 Rear panel connectors 1. USB 2.0 ports 7-10 2. DisplayPort 3. Intel LAN port* 4. Realtek LAN port* 5. USB BIOS Flashback button 6. HDMI port 7. USB 3.0 ports 5-6, support ASUS USB 3.0 Boost. Bottom port supports USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 66
    Intel® 9 series chipset, all USB devices connected to the USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. • Multi-VGA output supports Rear Speaker Out Chapter 2 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 2-13
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 67
    2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers Chapter 2 2-14 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 68
    Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers Chapter 2 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 2-15
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 69
    ATX power button. If your monitor complies with the "green" standards or if it has a "power standby" feature, the monitor LED may light up or change from orange to green after the system LED turns on. The system then runs the power-on self tests (POST). While the tests the instructions in Chapter
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 70
    smoothness as your operating system. The term "BIOS" in this user manual refers to "UEFI BIOS" unless otherwise specified. BIOS (Basic Input and service personnel. When downloading or updating the BIOS file, rename it as Z97STU31.CAP for this motherboard. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 71
    and brief onscreen help to guide you in using the BIOS Setup program press during the Power-On Self Test (POST). If you do not press . • Ensure that a USB mouse is connected to your motherboard if you want to use • The BIOS setup program does not support the Bluetooth devices. BIOS menu screen The
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 72
    Mode item in section 3.8 Boot menu for details. Displays the CPU/motherboard temperature, CPU voltage output, CPU/chassis/power fan speed, and RAID mode for Intel Rapid Storage Technology Displays the CPU Fan's speed. Click the button to manually tune the fans ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-3
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 73
    Hot Keys Chapter 3 Sub-menu item Menu items Item description Configuration fields Scroll bar Last modified settings Goes back to EZ Mode Displays the CPU/motherboard temperature, CPU and memory voltage output 3-4 Chapter 3: BIOS setup
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 74
    bar displays the current settings of your fans. Use this button to manually tweak the fans to your desired settings. Refer to section 3.2.3 QFan motherboard's SATA mode from AHCI to RAID mode. Refer to section 3.2.4 EZ Tuning Wizard for more information. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 75
    above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste. • You can only use the alphanumeric characters to enter your notes. Hot keys This button above
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 76
    3.2.3 Q-Fan Control The Q-Fan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans. Click to select a fan Click to undo the changes Click to go back to main menu Select to manually configure your fans ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-7
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 77
    configure your fans' operating speed. Speed points Click or tap to manually configure your fans To configure your fans: 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 78
    of the CPU fan type, click I'm not sure. The system automatically detects the CPU fan type. 4. Click Next then click Yes to confirm auto-tuning. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-9 Chapter 3
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 79
    3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. Chapter 3 3-10 Chapter 3: BIOS setup
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 80
    . 4. Click Exit (ESC) or press key to close Setup Tree Map screen. 5. Go to My Favorites menu to view the saved BIOS items. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-11
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 81
    3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 82
    the User Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-13
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 83
    values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display other BIOS items. Chapter 3 3-14 Chapter 3: BIOS setup
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 84
    preset overclocking configuration options: [Auto] Loads the optimal settings for the system. [Manual] Automatically optimizes the CPU ratio and BCLK frequency. The following item appears only depend on the value you set on BCLK Frequency. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-15
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 85
    item allows you to maximize the oveclocking performance optimized by ASUS core ratio settings. [Disabled] This item allows you Core Ratio Limit [Auto] Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 1-Core Limit value that must be higher than or equal to the 2-Core
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 86
    . [Manual] This ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption settings. Enable this item to set lower CPU VCCIN and Vcore voltages and achieve the best energy saving condition. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 87
    DRAM Timing Control The subitems in this menu allow you to set the DRAM timing control features. Use the or keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the key. Changing the values in this menu may cause the system to become
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 88
    ) [Auto] Configuration options: [Auto] [1] - [15] Third Timings tRDRD [Auto] Configuration options: [Auto] [1] - [7] tRDRD_dr [Auto] Configuration options: [Auto] [1] - [15] tRDRD_dd [Auto] Configuration options: [Auto] [1] - [15] Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-19
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 89
    you to enable or disable the DIMMs on channels A and B. Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1] [Disable Both DIMMS] Scramble Setting [Optimized (ASUS)] This item allows you to set the optimized mode to enhance system stability. Configuration options: [Optimized
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 90
    Load-line is defined by Intel® specification and affects CPU Manual] to configure a higher frequency for a quicker transient response speed. Configuration options: [Auto] [Manual] DO NOT remove the thermal module. The thermal conditions should be monitored. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 91
    The following item appears only when you set the CPU VRM Switching Frequency to [Manual]. Fixed CPU VRM Switching Frequency (KHz) [300] This item allows you to set a higher frequency for a quicker transient response speed. Use the or to adjust
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 92
    range and system stability. Set this item to [Manual] to manually set a fixed DRAM switching frequency for an increased set the CPU ratio and their features. Enhanced Intel SpeedStep Technology [Enabled] This item allows the operating Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-23
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 93
    Turbo Mode [Enabled] This item allows you to enable your core processor's speed to run faster than the base operating frequency when it is below operating power, current and temperature specification limit. Configuration options: [Disabled] [Enabled] The following items appear only when you set the
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 94
    item allows you to set the slew rate for the Fully Integrated Voltage Regulator when it enters manual override mode. Configuration options: [Auto] [Regular] [Fast] Idle Power-out Response [Auto] values range from 0 A to 80 A at 1 A increment. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-25
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 95
    OC_CPU jumper is set to ON. Refer to section 1.2.7 Jumpers of this user guide for more details. CPU Core Voltage [Auto] This item allows you to options: [Auto] [Manual Mode] [Offset Mode] The following item appears only when you set the CPU Core Voltage to [Manual Mode]. CPU Core Voltage
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 96
    enhance the overclocking capability. You can use the or keys to adjust the value. The values range from 0.001 V to 0.999 V with a 0.001 V interval. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-27
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 97
    item appears only when you set SVID Support to [Enabled]. SVID Voltage Override 92 V with a 0.005 V interval. According to Intel® CPU specifications, DIMMs with voltage requirement over 1.65 the CPU PLL Voltage, CPU Manual Voltage, CPU Offset Voltage, iGPU Manual Voltage, iGPU Offset Voltage, DRAM
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 98
    BCLK. Set this item to [Enabled] for EMI reduction, or set this item to [Disabled] to enhance BCLK overclocking. Configuration options: [Auto] [Disabled] [Enabled] Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-29
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 99
    3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Chapter 3 3-30 Chapter 3: BIOS setup
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 100
    in this menu may vary based on the CPU installed. Chapter 3 Intel Adaptive Thermal Monitor [Enabled] This item allows you to protect the CPU OS to boot even without support for CPUs with extended CPUID functions. Configuration options: [Disabled] [Enabled] ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-31
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 101
    Disable prevents certain classes of malicious buffer overflow attacks when combined with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3). Configuration options: [Disabled] [Enabled] Intel Virtualization Technology [Disabled] When set to [Enabled], a VMM can utilize the additional
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 102
    C7 latency for C7 state. Configuration options: [Short] [Long] Package C State Support [Auto] This item allows you to set the a C-state support for the CPU package. Configuration options: [Auto] [Enabled] [C0/C1] [C2] [C3] [C6] [CPU C7] [CPU C7s] Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-33
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 103
    automatically goes into sleep mode when the partition size is not enough for the Intel® Rapid Start Technology to work. Configuration options: [Enabled] [Disabled] Active Memory Threshold [0] This item supports Intel Rapid Storage Technology when the partition size is greater than the Active Page
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 104
    the SRIS (Separate Reference Clock Independent Spread Spectrum Clocking Architecture) support for connected SATA Express devices. [Auto] Set to activate SRIS support. [Disabled] Set to disable SRIS support and enable ASUS RUNWAY SATA Express bridge card. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-35
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 105
    Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that Aggressive LPM Support [Disabled] This item is designed for LPM (link power management) support with a shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks.
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 106
    to support high frequency DRAMs for a better stability. Configuration options: [Enabled] [Disabled] Memory Remap [Enabled] Set this item to [Enabled] to support DRAM address remapping for 64-bit operating systems. Configuration options: [Enabled] [Disabled] ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-37
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 107
    ] Your system automatically detects the presence of USB devices at startup. If any USB devices are detected, the legacy USB support is enabled. Intel xHCI Mode [Smart Auto] [Auto] The xHCI is automatically enabled and runs at USB 3.0 mode when the xHCI driver is installed in the operating system
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 108
    enable or disable the individual USB ports. Refer to section 1.2.2 Motherboard layout for the location of the USB ports. 3.6.6 Platform Misc state power management) support for devices. [Disabled] BIOS controls the ASPM support for the device. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-39
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 109
    the ASPM to take effect. Configuration options: [Disabled] [L0s] [L1] [L0sL1] PEG ASPM Support [Disabled] This item allows you to select the ASPM state for energy-saving conditions, or use the ASUS optimized energy saving profile. Configuration options: [Disabled] [L0s] [L1] [L0sL1] [Auto] Chapter
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 110
    connector (AAFP) mode to legacy AC'97 SPDIF Out Type [SPDIF] [SPDIF] Sets to an SPDIF audio output. [HDMI] Sets to an HDMI audio output. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-41 Chapter 3
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 111
    ] The following item appears only when you set the ASMedia USB 3.1 Controller to [Enabled]. ASMedia USB 3.1 Battery Charging Support [Disabled] This item allows you to enable the ASMedia® USB 3.1 battery charging support of your system. Configuration options: [Disabled] [Enabled] Asmedia Storage
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 112
    item appears only when you set the Intel LAN Controller to [Enabled]. Intel PXE OPROM [Disabled] This item allows you to enable or disable the Intel® LAN PXE (Preboot Execution Environment) option PCI-E LAN cards. Configuration options: [Disabled] [Enabled] ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-43
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 113
    network stack. Configuration options: [Disabled] [Enabled] The following item appears only when you set the Network Stack to [Enabled]. Ipv4/Ipv6 PXE Support [Enabled] This item allows you to enable or disable the Ipv4/Ipv6 PXE wake event. Configuration options: [Disabled] [Enabled] Chapter 3 3-44
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 114
    create a RAID volume. This item only appears when at least one HDD is connected to the Intel® SATA ports and set to RAID mode. Name [Volume1] This item allows you to key in [128KB] Capacity (MB): [0] This item allows you to set the RAID capacity. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-45 Chapter 3
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 115
    detects and displays the CPU, chassis, power, and assistant fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A. Select [Ignore] if you do not wish to display the detected speed. CPU Core 0/3 Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 116
    speed for quiet CPU fan operation. [Turbo] Set to achieve maximum CPU fan speed. [Manual] Set to assign the detailed fan speed control parameters. The following items appear only when you fan duty cycle. The values may differ via Qfan tuning. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-47
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 117
    feature into DC Mode, PWM Mode, or disable these Q-Fan controls from your motherboard. Configuration options: [Disabled] [DC Mode] [PWM Mode] The following items . [Turbo] Set to achieve maximum chassis fan speed. [Manual] Set to assign detailed fan speed control parameters. The following
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 118
    DC Mode, PWM Mode, or disable these Q-Fan controls from your motherboard. Configuration options: [Disabled] [DC Mode] [PWM Mode] The [Turbo] Set to achieve maximum assistant fan speed. [Manual] Set to assign detailed fan speed control parameters. The 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-49
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 119
    options: [Disabled] [15 seconds] [30 minutes] [45 seconds] Anti Surge Support [Enabled] This item allows you to enable or disable the OVP (Over Voltage voltage exceeds the safe range that protects the motherboard's components. Configuration options: [Disabled] [Enabled] Chapter 3 3-50 Chapter
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 120
    SATA Support USB devices will not be available until OS boot up for a fastest POST time. All USB devices will be available during POST. This process will extend the POST time. For a faster POST time, only USB ports with keyboard and mouse connections will be detected. ASUS SABERTOOTH Z97 MARK 1/USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 121
    Network Stack Driver Support [Disabled] [Disabled] Select to skip the network stack driver from loading during POST. [Enabled] Select to load the network stack driver during POST. Next Boot after AC Power Loss [Normal Boot] [Normal Boot] Returns to normal boot on the next boot after an AC power
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 122
    to decode the 64-bit capable devices above 4G address space. Ensure that your system supports 64-bit PCI decoding. Configuration options: [Disabled] [Enabled] Setup Mode [EZ Mode] options: [Legacy OpROM first] [UEFI driver first] [Ignore] Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-53
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 123
    Configuration options: [Legacy OpROM first] [UEFI driver first] Secure Boot This item allows you to Windows® nonUEFI mode. Microsoft® Secure Boot only supports Windows® UEFI mode. The following item appears to save the PK (Platform Keys) to a USB storage device. PK Management The Platform Key (PK)
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 124
    drivers USB storage device. Append Default db This item allows you to load the additional db from a storage device so that more images can be loaded securely. The db file must be formatted as a UEFI variable structure with time-based authenticated variable. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 125
    Default dbx This item allows you to load the downloaded dbx from a USB storage device. Configuration options: [Yes] [No] Append Default This item > after POST (Windows® 8 not supported). • To select the boot device during system startup, press when ASUS Logo appears. Boot Override These item
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 126
    you to run ASUS EZ Flash 2. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more details, refer to section 3.11.2 ASUS EZ Flash 2. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-57 Chapter
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 127
    3.9.2 ASUS O.C. Profile This item allows you to store or load multiple BIOS settings. Load from Profile This item allows profile. Key in a profile number from one to eight, press , and then select Yes. Load/Save Profile from/to USB Drive This item allows you to load or save profile from your
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 128
    3.9.3 ASUS DRAM SPD Information This item allows you to view the DRAM SPD information. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-59
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 129
    program without saving your changes. When you select this option or if you press , a confirmation window appears. Select Yes to discard changes and exit. ASUS EZ Mode This option allows you to enter the EZ Mode screen. Launch EFI Shell from filesystem device This option allows you to attempt to
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 130
    Internet connection either through a network or an ISP (Internet Service Provider). • This utility is available in the support DVD that comes with the motherboard package. • Refer to section 4.4.3 EZ Update of this user guide for more information. Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-61
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 131
    ‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1. Insert the USB flash disk that contains the latest BIOS file to the USB port. 2. Enter the Advanced Mode of the BIOS setup program. Go to the
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 132
    file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. ! Doing so can cause system boot failure! Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-63
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 133
    Before updating BIOS • Prepare the motherboard support DVD and a USB flash drive. • Download the latest BIOS file and BIOS Updater from http://support.asus.com and save them in your USB flash drive. NTFS is not supported under DOS environment. Ensure that your USB flash drive is in single partition
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 134
    then select D:. Drives panel ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01] Current ROM BOARD: SABERTOOTH Z97 MARK 1/USB 3.1 VER: 0210 (H :00 B :00) DATE: 04/12/2014 PATH: C:\ Update ROM BOARD: keys to select the BIOS file and press . Chapter 3 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 3-65
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 135
    file, select Yes to confirm the BIOS update. Are you sure you want to update the BIOS? Yes No The BIOS Backup feature is not supported due to security regulations. 5. Select Yes then press . When BIOS update is done, press to exit BIOS Updater. 6. Restart your computer. DO NOT
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 136
    . 2. In the AutoPlay dialog box, click or tap Run ASSETUP.EXE. Chapter 4 If the AutoPlay dialog box does not appear, browse the contents of the support DVD and double-click or tap \\bin\ASSETUP.EXE to launch the ASUS motherboard support DVD main menu. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-1
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 137
    AHCI driver disk. The Manual menu contains the list of supplementary user guides. Click or tap an item to open the folder of the user guide. The Utilities menu shows the applications and other software that the motherboard supports. Click or tap an item to install Click or tap to display the ASUS
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 138
    3. Some software manuals are provided in different languages. Open the language's folder to view the software manual. The screenshots in this section are for reference only. The actual software manuals containing in the support DVD vary by models. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-3 Chapter
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 139
    support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. 4.4 AI Suite 3 AI Suite 3 is an all-in-one interface that integrates several ASUS 1. Place the Support DVD into the
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 140
    the Utilities tab and click or tap AI Suite 3. 3. Follow the succeeding onscreen instructions. If the ASUS motherboard support DVD main menu did not appear, try the following: a. Go to the Start or tap the AI Suite 3 app on the Start Screen). Chapter 4 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-5
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 141
    Flashback Push Notice USB 3.1 Boost System Information USB Charger+ Version • Some functions in the AI Suite 3 main menu in this user guide may vary depending on the motherboard model. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 142
    on Thermal Radar 2 appears only when you install an optional ASUS graphics card into your system. • The VGA feature of Thermal Radar 2 supports ASUS NVidia 700 Series graphics card only. VGA - Auto Mode The to save a new profile Click to load a saved profile ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-7
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 143
    VGA - Smart Mode Manually adjust the acceleration and deceleration time of the graphic card's changes Click to save a new profile Click to load a saved profile VGA - RPM Mode Allows you to manually adjust the fan's speed (in rpm). Press the Fan Tuning button if this item is disabled or grayed-out
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 144
    system's current thermal settings. It allows you to configure your CPU, chassis, and the exclusive TUF Turbo fans to achieve the best balance between cooling performance and low noise. Click or tap to condition of your system. Click or tap to scroll down/up ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-9
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 145
    DIGI+ Power Control ASUS DIGI+ Power Control features the revolutionary and innovative digital VRM and DRAM Voltage controllers. These controllers offers ultra-precise memory and to the previous screen Click or tap to undo the changes Click or tap to apply the changes Chapter 4: Software support
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 146
    specifications of your USB device. • To ensure normal charging function, disconnect and reconnect your USB device every time you enable or disable Ai Charger+. • Ai Charger+ does not support USB hubs, USB extension cables, and generic USB cables. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-11 Chapter
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 147
    your motherboard's software, drivers and BIOS easily. With this utility, you can also manually motherboard driver, software and firmware Click or tap to search and select the BIOS file Click or tap to select a boot logo Click or tap to update the BIOS Chapter 4 4-12 Chapter 4: Software support
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 148
    Manually update the BIOS and selecting a boot logo Click or tap to search an image file for your boot logo Click or tap to go you click or tap BIOS Update button, click or tap Flash to update the BIOS and upload the boot logo in your system. Chapter 4 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-13
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 149
    or tap main menu, then select USB BIOS Flashback. on the top-right corner of the AI Suite 3 USB BIOS Flashback is available only in selected motherboard models. Using USB BIOS Flashback Set a schedule for the Cancel to cancel the download schedule. Chapter 4 4-14 Chapter 4: Software support
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 150
    the latest BIOS version. 2. After the utility detects a new BIOS, click or tap from the Save to: field, select the USB flash drive, then click or tap Download. SABERTOOTH Z97 MARK 1/USB 3.1 3. After the download is complete, click or tap OK. Chapter 4 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-15
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 151
    you want to pair with. To pair your computer and smart device, ensure that both are connected to the same wireless network. 4-16 Chapter 4: Software support Chapter 4
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 152
    to your smart device Tick to send alert when the components selected are back to its normal status Tick to select the smart device Chapter 4 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-17
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 153
    PC sent messages Tap to scan more host computers Click or tap to send your message Tap to delete PC alerts Chapter 4 4-18 Chapter 4: Software support
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 154
    I/O connection of your user guide for more details. • USB 3.1 Boost automatically detects the USB 3.1/3.0 devices that support UASP. • The data transfer speed varies with USB devices. For a higher data transfer performance, use a USB 3.1 device. Chapter 4 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-19
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 155
    utility allows you get the detailed information of the motherboard, CPU, and memory settings. Launching the System top-right corner of the AI Suite 3 Viewing the motherboard information Click or tap the MB tab to view the motherboard's information. Viewing the CPU information Click or tap
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 156
    Viewing the SPD information Click or tap the SPD tab to view the memory's information. Chapter 4 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-21
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 157
    this utility. Refer to section 2.3.1 Rear I/O connection of your user guide for more details. • The USB Charger+ does not support USB hubs and USB extension cables, and generic USB cables. • The USB Charger+ may not recognize some ASUS devices due to a special design. Chapter 4 4-22 Chapter
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 158
    4.4.8 Version Displays the installed software or utilities and their current version. Chapter 4 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-23
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 159
    to set an online budget time to your network adapters. • Traffic Analysis: Allows you to assign protocols and programs in one set. 4-24 Chapter 4: Software support Chapter 4
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 160
    convenience. Follow the installation wizard to install the Realtek® Audio Driver from the support DVD that came with the motherboard package. If the Realtek® audio software is correctly installed, device button Analog and digital connector status Chapter 4 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 4-25
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 161
    . b. If you select Front Speaker Out, click or tap to select the type of speaker installed then click or tap OK. Chapter 4 4-26 Chapter 4: Software support
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 162
    Chapter 5: RAID support RAID support 5 5.1 RAID configurations The motherboard comes with the Intel® Rapid Storage Technology that supports RAID 0, RAID 1, RAID 10 and RAID 5 configuration. existing drive and three new drives for this setup. Chapter 5 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 5-1
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 163
    5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 164
    + to display the utility main menu. Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ MAIN MENU utility supports maximum four hard disk drives for RAID configuration. Chapter 5 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 5-3
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 165
    the utility main menu, select 1. Create RAID Volume and press . The following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ CREATE VOLUME MENU ] Name: Volume0 RAID Level: Disks: Strip Size: Capacity
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 166
    down arrow key to select a drive, and then press to select. A small triangle marks the selected drive. Press after completing your selection. 6. Use the up/down arrow key to the main menu, or to go back to the CREATE VOLUME menu. Chapter 5 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 5-5
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 167
    Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: 1. From the utility main menu, select 2. Delete RAID Volume and press . The following screen appears: Name Volume0 [ DELETE VOLUME MENU
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 168
    the RAID driver from a USB flash drive, you have to use another computer to copy the RAID driver from the support DVD to the USB flash drive. To set up a Windows® UEFI operating system under RAID mode, ensure to load the UEFI driver for your optical drive. Chapter 5 ASUS SABERTOOTH Z97 MARK 1/USB
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 169
    Chapter 5 5-8 Chapter 5: RAID configurations
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 170
    interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. ASUS SABERTOOTH Z97 MARK 1/USB 3.1 A-1
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 171
    . If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Appendices A-2 Appendices
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 172
    our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal should not be placed in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our ASUS SABERTOOTH Z97 MARK 1/USB 3.1 A-3 Appendices
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 173
    FCC Bluetooth Wireless Compliance The antenna used with this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant. Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 174
    direttive CE. Per maggiori informazioni fate riferimento alla dichiarazione di conformità CE. ASUS AsusTek Inc CE CE Hrvatski AsusTek Inc. ovim izjavljuje da je ovaj Za više informacija molimo pogledajte Deklaraciju o usklađenosti EK. Appendices ASUS SABERTOOTH Z97 MARK 1/USB 3.1 A-5
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 175
    Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site http://www.asus.com/us/ Technical Support Support fax Telephone Online support +1-812-284-0883 +1-812-282-2787 http://www.service.asus.com/ ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen
  • Asus SABERTOOTH Z97 MARK 1 USB 3.1 | User Guide - Page 176
    . 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Product name : Motherboard Model name : SABERTOOTH Z97 MARK 1, SABERTOOTH Z97 MARK 1/USB 3.1, SABERTOOTH Z97 MARK 2, SABERTOOTH Z97 MARK S conform with the essential requirements of the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
Motherboard
SABERTOOTH Z97
MARK 1/USB 3.1