Asus SABERTOOTH Z97 MARK 2 USB 3.1 User Guide

Asus SABERTOOTH Z97 MARK 2 USB 3.1 Manual

Get Asus SABERTOOTH Z97 MARK 2 USB 3.1 PDF manuals and user guides View all Asus SABERTOOTH Z97 MARK 2 USB 3.1 manuals
Add to My Manuals
Save this manual to your list of manuals

Asus SABERTOOTH Z97 MARK 2 USB 3.1 manual content summary:

  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 1
    Motherboard SABERTOOTH Z97 MARK 2/USB 3.1
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 2
    service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL from http://support.asus.com/download problems
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 3
    About this guide...vii SABERTOOTH Z97 MARK 2/USB 3.1 specifications summary ix Package contents...xiii Installation tools and components xiv Chapter 1: Product Introduction 1.1 Special features 1-1 1.1.1 Product highlights 1-1 1.1.2 "Ultimate COOL" Thermal Solutions 1-2 1.1.3 "TUF Engine
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 4
    3-46 3.8 Boot menu 3-51 3.9 Tool menu 3-57 3.9.1 ASUS EZ Flash 2 Utility 3-57 3.9.2 ASUS O.C. Profile 3-58 3.9.3 ASUS DRAM SPD Information 3-59 3.10 Exit menu 3-60 3.11 Updating BIOS 3-61 3.11.1 EZ Update 3-61 3.11.2 ASUS EZ Flash 2 3-62 3.11.3 ASUS CrashFree BIOS 3 3-63 iv
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 5
    Installing an operating system 4-1 4.2 Support DVD information 4-1 4.2.1 Running the support DVD 4-1 4.2.2 Obtaining the software manuals 4-3 4.3 Software information 4-4 4.4 AI Suite 3...4-4 4.4.1 Ai Charger 4-11 4.4.2 EZ Update 4-12 4.4.3 USB BIOS Flashback 4-14 4.4.4 Push Notice
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 6
    Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with . • If you encounter technical problems with the product, contact a qualified service technician or your retailer. vi
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 7
    the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. • Chapter 4: Software support This chapter describes the contents of the support DVD 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 8
    note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 9
    SABERTOOTH Z97 MARK 2/USB 3.1 specifications summary CPU Chipset Memory Expansion slots VGA Multi-GPU support LAN LGA1150 socket for the 4th, New 4th, and 5th generation Intel® Core™ i7 / Intel® Core™ i5 / Intel® Core™ i3, Pentium®, and Celeron® processors Supports 22nm CPU Supports Intel® Turbo
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 10
    SABERTOOTH Z97 MARK 2/USB 3.1 specifications summary Storage Audio USB Exclusive TUF Features Intel® Z97 Express Chipset with RAID 0, 1, 5, 10 and Intel Rapid Storage Technology 13 support - 6 x SATA 6Gb/s ports with RAID 0, 1, 5, 10 support - Supports Intel® Smart Response Technology, Intel®
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 11
    SABERTOOTH Z97 MARK 2/USB 3.1 specifications summary Other Special Features Rear Panel I/O Ports - USB 3.1 Boost featuring speedy USB 3.1 transmission - USB BIOS Flashback with USB BIOS Flashback Wizard for EZ BIOS download scheduling - USB Charger+ featuring quick-charging function for all smart
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 12
    SABERTOOTH Z97 MARK 2/USB 3.1 specifications summary Internal I/O connectors BIOS features Accessories Manageability Support DVD contents Form factor 2 x USB 3.0/2.0 connectors support additional 4 USB 3.0/2.0 ports (19-pin; moss green) 2 x USB 2.0/1.1 connectors support additional 4 USB 2.0/1.1
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 13
    package for the following items User Manual ASUS SABERTOOTH Z97 MARK 2/ USB 3.1 motherboard Technical documentations, certification and warranty card Support DVD 4 x Serial ATA 6.0 Gb/s cables 1 x ASUS SLI™ bridge connector (7 cm) 1 x ASUS Q-Shield 1 x 2-in-1 ASUS Q-Connector kit • If any of
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 14
    Installation tools and components 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit Intel® LGA1150 CPU Intel® LGA1150 compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 15
    Internet applications. Quad-GPU SLI and Quad GPU CrossFireX™ Support This motherboard features the most powerful Intel® Z97 platform that optimizes PCIe allocation in multi-GPU SLI and CrossFireX™ solution, giving you a brand-new gaming enjoyment. Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-1
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 16
    processors family support Intel® Smart USB 3.1 integration This motherboard has the latest USB 3.1 connectivity built in with dual Type-A ports for the very fastest USB CPU and VGA zone cooling status, and promotes extended system longevity, power saving solution, and noise reduction. TUF ICe ASUS TUF
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 17
    CPU Voltage controllers. These controllers offers ultra-precise memory and voltage tuning for optimal system efficiency, stability and performance. TUF Components (TUF new Alloy Chokes, TUF 10K Ti-Caps, and TUF improve the system's bootup. Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-3
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 18
    providing you with more flexibility, convenience, and easy to navigate UEFI BIOS than the traditional BIOS versions. It offers you with dual selectable modes and native support for hard drives larger than 2.2 TB. ASUS UEFI BIOS includes the following new features: • New My Favorites function allows
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 19
    to control files and sync them all across cloud services in a few clicks. • ASUS Media Streamer: Allows you to stream media files to a DLNA-supported devices. • Remote Desktop: Allows you to view to switch back and forth between different utilities. Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-5
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 20
    uncompressed digital video up to 4K/2K resolution visuals through a single cable. Supporting HDCP copy protection such as HD DVD and blu-ray discs, HDMI in regards to energy consumptions. This is in line with ASUS vision of creating environment-friendly and energyefficient products through product
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 21
    or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-7
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 22
    1.2.2 Motherboard layout Chapter 1 Refer to Internal connectors and Rear I/O connection section for more information about rear panel connectors and internal connectors. 1-8 Chapter 1: Product introduction
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 23
    CPU socket 4. DDR3 DIMM slots 5. MemOK! button 6. USB 3.0 connector (20-1 pin USB3_12, USB3_34) 7. Intel® Z97 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6 [brown]) 8. CPU 31 1-30 1-28 1-27 1-37 1-36 1-32 1-38 1-34 1-34 1-31 1-37 Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-9
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 24
    unplugged before installing the CPU. • Ensure that you install the correct CPU designed for LGA1150 only. DO NOT install a CPU designed for LGA1155 and your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 25
    module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-11
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 26
    Intel® CPU spec, DIMM voltage below 1.65V is recommended to protect the CPU. • marked value. To operate at the vendor-marked or at a higher frequency, refer to section Ai Tweaker menu for manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 27
    SABERTOOTH Z97 MARK 2/USB 3.1 Motherboard Qualified Vendors Lists (QVL) DDR3 3200 MHz capability Vendors Part No. Size SS 1.65V 12-14-14-35 1.65V 12-14-14-36 1.65V DIMM socket support (Optional) 2 4 • • • • • • • • • • • • • • Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-13
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 28
    65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V 1.65V DIMM socket support (Optional) 24 DDR3 2666 MHz capability Vendors Part No. Size SS/ Chip Chip DS Brand NO. Apacer 78.BAGFF.AFC0C(XMP) 8GB ( 2x 4GB ) DS
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 29
    TX2400KLN-8GK(XMP) 8GB ( 2x 4GB ) SS/ DS Chip Brand Chip NO. Timing Voltage DIMM socket support (Optional) 124 SS - - 11-13-13-35 1.65 • • • DS - - 11-13-13 -11-13- - 13-32 - 2400-11-12- 1.6 11-29 • • • • • • • • • Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-15
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 30
    1.65 1.65 1.5 1.65 1.5 1.5 1.5 1.65 1.5 1.5 1.65 1.5 1.6 1.6 DIMM socket support (Optional) 124 • • • • • • • • • • • • • • • • • • • • • • • • • • • • - 9-9-9-27 9-9-9-28 Voltage 1.65 1.65 DIMM socket support (Optional) 124 • • • • • • • •
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 31
    1.5 9-27 - 9-9-9-27 1.5 DIMM socket support (Optional) 124 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • (continued on the next page) Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-17
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 32
    1.65 • • • - • • • - • • • DDR3 1600 MHz capability Vendors Part No. Size SS/ Chip DS Brand Chip NO. Timing Voltage DIMM socket support (Optional) 1 2 4 A-DATA AD3U1600W4G11 4GB SS A-DATA 3WCD-1211A 11-11-11-28 - • • • A-DATA AD3U1600W8G11 8GB DS A-DATA 3WCD-1211A 11
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 33
    .B1GE3.9L10C Size SS/ DS Chip Brand Chip NO. Timing Voltage DIMM socket support (Optional) 124 4GB DS Apacer AM5D5908DEQSCK - 1.65 ••• Apacer Apacer Apacer Apacer 1.5 10-27 10-10- 1.5 10-27 8-8-8-24 1.5 (continued on the next page) Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-19
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 34
    -DG(XMP) 2GB SS/ Chip DS Brand DS DS SS Elixir Chip NO. - Timing 1600-99-9-24 8-8-8-24 Voltage 1.5 1.5 DIMM socket support (Optional) 124 ••• ••• N2CB2G80GN-DG 9-9-9-28 - ••• Elixir M2X4G64CB8HG5N-DG(XMP) 4GB DS Elixir N2CB2G80GN-DG 9-9-9-28 - ••• G.SKILL F3-12800CL9D-8GBSR2(XMP) 8GB
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 35
    -16 DS UMAX U2S96D30TP-16 - - 11-11-11- 28-1 11-11-11- 28-2 1600-11- 11-11-28 1600-11- 11-11-28 DIMM socket support (Optional) 124 ••• ••• ••• Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-21
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 36
    ( 2x DS 4GB ) INNODISK M3UN-2GHJBC09 2GB SS Hynix Chip NO. Timing Voltage DIMM socket support (Optional) 124 23EY4587MB3H - 1.5 • • • 23EY4587MB3H - 1.5 • • • AM5D5908CEHSBG 9 - • • • 302G08-DJ1C - - • • • 304G08-DJ1B 9-10- - 10-26 • • • 304G08-DJ1B 9-9-9-24
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 37
    . • ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 38
    1.2.5 Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Chapter 1 Slot No. 1 2 3 4 5 6 Slot Description PCIe 2.0 x1_1 slot PCIe 3.0/2.0 x16_1 slot PCIe 2.0 x1_2 slot PCIe 3.0/2.0
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 39
    mode PCI Express sharing mode PCIe x16_3 Rear USB 3.1_E1~E2 x2 Enabled x4 Disabled • - - - - - - - - - - - - - - - shared - - - XHCI Controller - - - - - shared - - High Definition Audio - - - - - - shared - Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-25
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 40
    Memory QVL (Qualified Vendors Lists) in this user manual or on the ASUS website at www.asus.com. • If you turn off the computer and due to BIOS overclocking, press the MemOK! button to boot and load the BIOS default settings. A message will appear during POST reminding you that the BIOS has been
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 41
    the BIOS can automatically reset parameter settings to default values. • Due to the chipset behavior, AC power off is required to enable C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before rebooting the system. ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-27
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 42
    Over Voltage jumper allows you to set a higher CPU voltage for a flexible overclocking system, depending on the type of the installed CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage setting, insert the jumper to pins 1-2. Chapter 1 1-28
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 43
    LEDs The POST State LEDs provide the status of these key components during POST (Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drives. If an error is found, the critical component's LED stays lit up until the problem is solved. Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-29
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 44
    1. Intel® Z97 Serial ATA 6.0 with the Intel® Rapid Storage Technology through the onboard Intel® Z97 chipset. Chapter 1 • These connectors are set to [AHCI Mode set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.6.3 PCH Storage Configuration for details
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 45
    devices, optimized power efficiency, and backward compatibility with USB 2.0. These connectors are based on xHCI specification. We recommend you to install the related driver to fully use the USB 3.0 ports under Windows® 7 or later Windows® OS. ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-31 Chapter 1
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 46
    damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, dark brown) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. The USB 2.0 module is purchased separately. Chapter 1 1-32 Chapter
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 47
    connector supports the CPU fan of maximum 1A (12 W) fan power. • The CPU_FAN, CHA_FAN and ASST_FAN connectors support the TUF Thermal Radar 2 feature. • To fully use the fan control function, ensure that you connect only an assistant fan to the ASST_FAN connectors. ASUS SABERTOOTH Z97 MARK 2/USB
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 48
    This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97]. 7. Thermal Sensor connectors (2-pin T_SENSOR1;
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 49
    want to use two or more high-end PCI Express x16 cards, use a PSU with 1000W power or above to ensure the system stability. Chapter 1 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-35
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 50
    9. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 51
    that supports DirectKey, from the chassis to this connector on the motherboard. Chapter 1 Ensure that your chassis comes with the extra button cable that supports the DirectKey feature. Refer to the technical documentation that came with the chassis for details. ASUS SABERTOOTH Z97 MARK 2/USB
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 52
    12. Thunderbolt header (5-pin TB_HEADER) This connector is for the add-on Thunderbolt I/O card that supports Intel's Thunderbolt Technology, allowing you to connect up to six Thunderbolt-enabled devices and a DisplayPort-enabled display in a daisy-chain configuration. The add-on Thunderbolt I/O
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 53
    ASUS SABERTOOTH Z97 MARK 2/USB 3.1 1-39 Chapter 1
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 54
    models, but the installation steps are the same for all models. 1. Install the ASUS Q-Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. Chapter 2 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 2-1
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 55
    3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT over tighten the screws! Doing so can damage the motherboard. 2-2 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 56
    2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1150 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1150 socket. Chapter 2 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 2-3
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 57
    2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. To install the CPU heatsink and fan assembly Chapter 2 2-4 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 58
    To uninstall the CPU heatsink and fan assembly Chapter 2 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 2-5
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 59
    2.1.4 DIMM installation Chapter 2 To remove a DIMM 2-6 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 60
    2.1.5 ATX Power connection OR OR ASUS SABERTOOTH Z97 MARK 2/USB 3.1 2-7 Chapter 2
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 61
    2.1.6 SATA device connection OR OR Chapter 2 2-8 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 62
    I/O Connector To install ASUS Q-Connector HDD LED HDD LED+ HDD LED- HDD LED PWR Ground Reset Ground POWER SW RESET SW To install USB 2.0 connector To install front panel audio connector Chapter 2 USB 2.0 AAFP To install USB 3.0 connector USB 3.0 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 2-9
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 63
    2.1.8 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2 2-10 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 64
    error. If this scenario happens, please restart the system to turn off the light. • Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system's failure to boot up, please contact your local ASUS Service Center. ASUS SABERTOOTH Z97 MARK 2/USB 3.1 2-11
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 65
    I/O connection Chapter 2 Rear panel connectors 1. USB 2.0 ports 7-10 2. DisplayPort 3. LAN (RJ-45) port* 4. USB BIOS Flashback button 5. HDMI port 6. USB 3.0 ports 5-6, support ASUS USB 3.1 Boost. Bottom port supports USB BIOS Flashback and USB Charger+ 7. USB 3.1 ports E1-E2 8. Audio I/O ports
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 66
    . Some legacy USB devices must update their firmware for better compatibility. • Multi-VGA output supports up to three displays under Windows® OS environment, two displays under BIOS, and one display Out Mic In Center/Subwoofer Rear Speaker Out Chapter 2 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 2-13
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 67
    2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers Chapter 2 2-14 Chapter 2: Basic installation
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 68
    Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers Chapter 2 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 2-15
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 69
    test. Check the jumper settings and connections or call your retailer for assistance. BIOS Beep One short beep One continuous beep followed by two short power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 3. 2.5 Turning off the computer While the system
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 70
    BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. When downloading or updating the BIOS file, rename it as Z97S2U31.CAP for this motherboard. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 71
    BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS BIOS setup program does not support the Bluetooth devices. BIOS menu screen The BIOS Setup
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 72
    the BIOS setup program configures system overclocking Chapter 3 Enables or disables the SATA RAID mode for Intel Rapid Storage Technology Displays the CPU Fan's speed. Click the button to manually tune depending on the devices you installed to the system. ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-3
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 73
    Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer modified settings Goes back to EZ Mode Displays the CPU/motherboard temperature, CPU and memory voltage output 3-4 Chapter 3: BIOS setup
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 74
    BIOS settings and save it to MyFavorites menu. Refer to section 3.3 My Favorites for more information. Q-Fan Control (F6) This button above the menu bar displays the current settings of your fans. Use this button to manually for more information. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-5
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 75
    Note (F9) This button above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste. • You can only use the alphanumeric characters to enter your notes. Hot keys
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 76
    Q-Fan Control The Q-Fan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans. Click to select a fan to be configured Click to Click to go back to main menu Select to manually configure your fans ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-7
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 77
    configure your fans' operating speed. Speed points Click or tap to manually configure your fans To configure your fans: 1. Select the fan that you want to configure and the fans' operating speed. 3. Click Apply to save the changes then click Exit (ESC). 3-8 Chapter 3: BIOS setup Chapter 3
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 78
    the CPU fan type (Box cooler, Tower cooler, or Water cooler) that you installed then click Next. If you are not sure of the CPU fan type, click I'm not sure. The system automatically detects the CPU fan type. 4. Click Next then click Yes to confirm auto-tuning. ASUS SABERTOOTH Z97 MARK 2/USB
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 79
    3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. Chapter 3 3-10 Chapter 3: BIOS setup
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 80
    on your keyboard or click Setup Tree Map screen. from the BIOS screen to open 2. On the Setup Tree Map screen, select the BIOS items that you want to save in MyFavorites screen. Main menu 5. Go to My Favorites menu to view the saved BIOS items. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-11
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 81
    . Security The Security menu items allow you to change the system security settings. • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section Onboard buttons and switches for information on how to erase the RTC RAM via the Clear
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 82
    system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and press then press . 3. Confirm the password when prompted. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-13
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 83
    of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display other
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 84
    Tuner to [Manual]. CPU Strap [Auto] This item allows you to select a strap close to your target BCLK (base clock) for an extreme overclocking, or leave it at [Auto] for the BIOS to upgrade. depend on the value you set on BCLK Frequency. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-15
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 85
    ASUS core ratio settings. [Disabled] This item allows you to set to default core ratio settings. CPU Core Ratio [Auto] This item allows you to set the CPU the CPU default Turbo Ratio setting or manually assign the CPU default Turbo Ratio setting or manually assign the CPU installed. Max. CPU Cache
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 86
    ] The ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption settings. Enable this item to set lower CPU VCCIN and Vcore voltages and achieve the best energy saving condition. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-17
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 87
    options: [Auto] [1] - [15] DRAM CKE Minimum Pulse Width [Auto] Configuration options: [Auto] [1] - [15] DRAM CAS# Write Latency [Auto] Configuration options: [Auto] [1] - [31] Chapter 3 3-18 Chapter 3: BIOS setup
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 88
    ) [Auto] Configuration options: [Auto] [1] - [15] Third Timings tRDRD [Auto] Configuration options: [Auto] [1] - [7] tRDRD_dr [Auto] Configuration options: [Auto] [1] - [15] tRDRD_dd [Auto] Configuration options: [Auto] [1] - [15] Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-19
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 89
    DIMM0] [Disable DIMM1] [Disable Both DIMMS] Scramble Setting [Optimized (ASUS)] This item allows you to set the optimized mode to enhance system stability . Configuration options: [Optimized (ASUS] [Default (MRC)] MCH Full Check [Auto] Enable this item
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 90
    and the component thermal production. Select [Manual] to configure a higher frequency for a quicker transient response speed. Configuration options: [Auto] [Manual] DO NOT remove the thermal module. The thermal conditions should be monitored. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-21
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 91
    the CPU VRM Switching Frequency to [Manual]. Fixed CPU CPU overclocking. A higher value setting provides higher power consumption delivery and extends the overclocking frequency range simultaneously. Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%] Chapter 3 3-22 Chapter 3: BIOS
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 92
    keys to adjust the value. The values depend on the CPU installed. DO NOT remove the thermal module. The thermal conditions range and system stability. Set this item to [Manual] to manually set a fixed DRAM switching frequency for an increased Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-23
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 93
    The values range from 1 W t0 4096 W. CPU Integrated VR Current Limit [Auto] Allows you to 1023.875 with a 0.125 interval. CPU Internal Power Switching Frequency Frequency Tuning Mode 0% to 6%. CPU Internal Power Fault Control Thermal Feedback [ [Disabled] [Enabled] CPU Integrated VR Fault Management [
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 94
    rate for the Fully Integrated Voltage Regulator when it enters manual override mode. Configuration options: [Auto] [Regular] [Fast [Auto] This item allows you to enhance the response of the CPU voltage regulator during the load transients. Use the or ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-25
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 95
    to section 1.2.7 Jumpers of this user guide for more details. CPU Core Voltage [Auto] This item allows you to configure the amount of voltage fed to the CPU cores. Increase the voltage when setting a high Core Frequency value. Configuration options: [Auto] [Manual Mode] [Offset Mode] The following
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 96
    this item takes the standard value of the installed CPU. Increase the amount of voltage to enhance the overclocking capability. You can use the or keys to adjust the value. The values range from 0.001 V to 0.999 V with a 0.001 V interval. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-27
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 97
    Support to [Enabled]. SVID Voltage Override [Auto] This item allows you to set the SVID Voltage override. By default, this item takes the standard value of the installed CPU The values of the CPU PLL Voltage, CPU Manual Voltage, CPU Offset Voltage, iGPU Manual Voltage, iGPU Offset Voltage, BIOS setup
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 98
    the value. The values range from 0.1 V to 1.9 V with a 0.00625 V interval. CPU Spread Spectrum [Auto] This item allows you to enhance the BCLK overclocking capability or reduce the EMI . Configuration options: [Auto] [Disabled] [Enabled] Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-29
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 99
    3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Chapter 3 3-30 Chapter 3: BIOS setup
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 100
    processor package. Configuration options: [All] [1] [2] [3] Limit CPUID Maximum [Disabled] When set to [Enabled], this item allows the legacy OS to boot even without support for CPUs with extended CPUID functions. Configuration options: [Disabled] [Enabled] ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-31
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 101
    CPU speed. Turbo Mode [Enabled] This item allows you to automatically set the CPU cores to run faster than the base operating frequency when it is below the operating power, current and temperature specification limit. Configuration options: [Enabled] [Disabled] Chapter 3 3-32 Chapter 3: BIOS
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 102
    C7 latency for C7 state. Configuration options: [Short] [Long] Package C State Support [Auto] This item allows you to set the a C-state support for the CPU package. Configuration options: [Auto] [Enabled] [C0/C1] [C2] [C3] [C6] [CPU C7] [CPU C7s] Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-33
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 103
    timer at S3 entry. The time ranges from 0 minute (immediately) to 120 minutes. Active Page Threshold Support [Enabled] The system automatically goes into sleep mode when the partition size is not enough for the Intel size is larger than the total memory size. 3-34 Chapter 3: BIOS setup Chapter 3
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 104
    allows the system to support Intel Smart Connect BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. Scroll down to display the other BIOS items. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 105
    Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases Aggressive LPM Support [Disabled] This item is designed for LPM (link power management) support with a better Plug Support. Configuration options: [Disabled] [Enabled] Chapter 3
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 106
    to support high frequency DRAMs for a better stability. Configuration options: [Enabled] [Disabled] Memory Remap [Enabled] Set this item to [Enabled] to support DRAM address remapping for 64-bit operating systems. Configuration options: [Enabled] [Disabled] ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-37
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 107
    Mode [Smart Auto] [Auto] The xHCI is automatically enabled and runs at USB 3.0 mode when the xHCI driver is installed in the operating system. [Smart Auto] Upon detection, the xHCI driver supports the USB 3.0 mode during both POST and operating system. [Enabled] Enables the xHCI controller
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 108
    when you set the PCI Express Native Power Management to [Enabled]. Native ASPM [Disabled] [Enabled] Windows® Vista OS controls the ASPM (active state power management) support for devices. [Disabled] BIOS controls the ASPM support for the device. ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-39
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 109
    Disabled] [Enabled] ASPM Support [Disabled] This item CPU and PCH sides must be enabled for the ASPM to take effect. Configuration options: [Disabled] [L0s] [L1] [L0sL1] PEG ASPM Support [Disabled] This item allows you to select the ASPM state for energy-saving conditions, or use the ASUS
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 110
    connector (AAFP) mode to legacy AC'97 SPDIF Out Type [SPDIF] [SPDIF] Sets to an SPDIF audio output. [HDMI] Sets to an HDMI audio output. ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-41 Chapter 3
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 111
    set the ASMedia USB 3.1 Controller to [Enabled]. ASMedia USB 3.1 Battery Charging Support [Disabled] This item allows you to enable the ASMedia® USB 3.1 battery charging support of your system. ) option ROM. Configuration options: [Enabled] [Disabled] Chapter 3 3-42 Chapter 3: BIOS setup
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 112
    RTC alarm date. When enabled, you can set the days, hours, minutes, or seconds to schedule an RTC alarm date. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-43
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 113
    network stack. Configuration options: [Disabled] [Enabled] The following item appears only when you set the Network Stack to [Enabled]. Ipv4/Ipv6 PXE Support [Enabled] This item allows you to enable or disable the Ipv4/Ipv6 PXE wake event. Configuration options: [Disabled] [Enabled] Chapter 3 3-44
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 114
    the size of your RAID setup. Configuration options: [4KB] [8KB] [16KB] [32KB] [64KB] [128KB] Capacity (MB): [0] This item allows you to set the RAID capacity. ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-45 Chapter 3
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 115
    the other BIOS items. Qfan Tuning Click this item to automatically detect the lowest speed and configure the minimum duty cycle for each fan. CPU Temperature / Select [Ignore] if you do not wish to display the detected speed. CPU Core 0/3 Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage The onboard
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 116
    [20] Use the or keys to adjust the CPU fan's lower temperature. The values range from 20% to 75%. CPU Fan Min. Duty Cycle(%) [20] Use the or keys to adjust the minimum CPU fan duty cycle. The values may differ via Qfan tuning. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-47
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 117
    only when you set the Chassis Fan Profile to [Manual]. Chassis Fan 1/4 Upper Temperature [70] Use the or keys to adjust the upper limit of the CPU temperature. The values range from 40°C to 90°C. fan duty cycle. The values may differ via Qfan tuning. Chapter 3 3-48 Chapter 3: BIOS setup
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 118
    when you set the ASST Fan 1/2 Profile to [Manual]. ASST Fan 1/2 Upper Temperature [70] Use the or keys to adjust the upper limit of the CPU temperature. The values range from 40°C to 90 duty cycle. The values may differ via Qfan tuning. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-49
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 119
    minutes. Configuration options: [Disabled] [1 minute] [3 minutes] [5 minutes] [10 minutes] Anti Surge Support [Enabled] This item allows you to enable or disable the OVP (Over Voltage Protection) and UVP components. Configuration options: [Disabled] [Enabled] Chapter 3 3-50 Chapter 3: BIOS setup
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 120
    SATA Support USB devices will not be available until OS boot up for a fastest POST time. All USB devices will be available during POST. This process will extend the POST time. For a faster POST time, only USB ports with keyboard and mouse connections will be detected. ASUS SABERTOOTH Z97 MARK 2/USB
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 121
    Driver Support [Disabled] [Disabled] Select to skip the network stack driver from loading during POST. [Enabled] Select to load the network stack driver you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot.
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 122
    EZ Mode of the BIOS after POST. CSM (Compatibility Support Module) This item allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, options: [Legacy OpROM first] [UEFI driver first] [Ignore] Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-53
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 123
    Configuration options: [Legacy OpROM first] [UEFI driver first] Secure Boot This item allows you ® nonUEFI mode. Microsoft® Secure Boot only supports Windows® UEFI mode. The following item appears to save the PK (Platform Keys) to a USB storage device. PK Management The Platform Key (PK) BIOS setup
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 124
    drivers USB storage device. Append Default db This item allows you to load the additional db from a storage device so that more images can be loaded securely. The db file must be formatted as a UEFI variable structure with time-based authenticated variable. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 125
    Default dbx This item allows you to load the downloaded dbx from a USB storage device. Configuration options: [Yes] [No] Append Default This item > after POST (Windows® 8 not supported). • To select the boot device during system startup, press when ASUS Logo appears. Boot Override These item
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 126
    allows you to run ASUS EZ Flash 2. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more details, refer to section ASUS EZ Flash 2. ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-57 Chapter
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 127
    then select Yes. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/ CPU configuration and BIOS version. Profile Name This item allows you to key in a profile name. Save to
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 128
    3.9.3 ASUS DRAM SPD Information This item allows you to view the DRAM SPD information. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-59
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 129
    you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the , a confirmation window appears. Select Yes to discard changes and exit. ASUS EZ Mode This option allows you to enter the EZ Mode screen. Launch EFI
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 130
    an Internet connection either through a network or an ISP (Internet Service Provider). • This utility is available in the support DVD that comes with the motherboard package. • Refer to section EZ Update of this user guide for more information. Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-61
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 131
    you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1. Insert the USB flash disk that contains the latest BIOS file to the USB port. 2. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 132
    enter BIOS Setup to recover the BIOS setting. To ensure system compatibility and stability, we recommend that you press to load default BIOS values. DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure! Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 133
    computer screen. Before updating BIOS • Prepare the motherboard support DVD and a USB flash drive. • Download the latest BIOS file and BIOS Updater from http://support.asus.com and save them in your USB flash drive. NTFS is not supported under DOS environment. Ensure that your USB flash drive is in
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 134
    Files panel to Drives panel then select D:. Drives panel ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01] Current ROM BOARD: SABERTOOTH Z97 MARK 2/USB3.1 VER: 0210 (H :00 B :00) DATE or Home/ End> keys to select the BIOS file and press . Chapter 3 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 3-65
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 135
    file, select Yes to confirm the BIOS update. Are you sure you want to update the BIOS? Yes No The BIOS Backup feature is not supported due to security regulations. 5. Select Yes then press . When BIOS update is done, press to exit BIOS Updater. 6. Restart your computer. DO NOT shut
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 136
    . 2. In the AutoPlay dialog box, click or tap Run ASSETUP.EXE. Chapter 4 If the AutoPlay dialog box does not appear, browse the contents of the support DVD and double-click or tap \\bin\ASSETUP.EXE to launch the ASUS motherboard support DVD main menu. ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-1
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 137
    AHCI driver disk. The Manual menu contains the list of supplementary user guides. Click or tap an item to open the folder of the user guide. The Utilities menu shows the applications and other software that the motherboard supports. Click or tap an item to install Click or tap to display the ASUS
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 138
    3. Some software manuals are provided in different languages. Open the language's folder to view the software manual. The screenshots in this section are for reference only. The actual software manuals containing in the support DVD vary by models. ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-3 Chapter
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 139
    support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. 4.4 AI Suite 3 AI Suite 3 is an all-in-one interface that integrates several ASUS 1. Place the Support DVD into the
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 140
    the Utilities tab and click or tap AI Suite 3. 3. Follow the succeeding onscreen instructions. If the ASUS motherboard support DVD main menu did not appear, try the following: a. Go to the Start or tap the AI Suite 3 app on the Start Screen). Chapter 4 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-5
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 141
    Update USB BIOS Flashback Push Notice USB 3.1 Boost System USB Charger+ Information Version • Some functions in the AI Suite 3 main menu in this user guide may vary depending on the motherboard model. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 142
    on Thermal Radar 2 appears only when you install an optional ASUS graphics card into your system. • The VGA feature of Thermal Radar 2 supports ASUS NVidia 700 Series graphics card only. VGA - Auto Mode The to save a new profile Click to load a saved profile ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-7
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 143
    VGA - Smart Mode Manually adjust the acceleration and deceleration time of the graphic card's changes Click to save a new profile Click to load a saved profile VGA - RPM Mode Allows you to manually adjust the fan's speed (in rpm). Press the Fan Tuning button if this item is disabled or grayed-out
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 144
    based on your system's current thermal settings. It allows you to configure your CPU, chassis, and the exclusive TUF Turbo fans to achieve the best balance between cooling performance and low noise. condition of your system. Click or tap to scroll down/up ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-9
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 145
    ASUS DIGI+ Power Control features the revolutionary and innovative digital VRM and DRAM Voltage controllers. These controllers offers ultra-precise memory and voltage tuning for optimal system efficiency, stability and performance. DIGI+ Power Control - CPU the changes Chapter 4: Software support
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 146
    specifications of your USB device. • To ensure normal charging function, disconnect and reconnect your USB device every time you enable or disable Ai Charger+. • Ai Charger+ does not support USB hubs, USB extension cables, and generic USB cables. ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-11 Chapter
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 147
    update your motherboard's software, drivers and BIOS easily. With this utility, you can also manually update the BIOS and select the boot logo or tap to automatically update your motherboard driver, software and firmware Click or tap to search and select the BIOS file Click or tap to select a
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 148
    your boot logo Click or tap to go back to EZ Update main screen Click or tap to proceed the updating BIOS and boot logo After you click or tap BIOS Update button, click or tap Flash to update the BIOS and upload the boot logo in your system. Chapter 4 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-13
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 149
    quickly check for the latest available BIOS and set the BIOS download schedule. Launching USB BIOS Flashback To launch USB BIOS Flashback, click or tap main menu, then select USB BIOS Flashback. on the top-right corner of the AI Suite 3 USB BIOS Flashback is available only in selected motherboard
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 150
    the latest BIOS version. 2. After the utility detects a new BIOS, click or tap from the Save to: field, select the USB flash drive, then click or tap Download. SABERTOOTH Z97 MARK 2/USB 3.1 3. After the download is complete, click or tap OK. Chapter 4 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-15
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 151
    you want to pair with. To pair your computer and smart device, ensure that both are connected to the same wireless network. 4-16 Chapter 4: Software support Chapter 4
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 152
    to your smart device Tick to send alert when the components selected are back to its normal status Tick to select the smart device Chapter 4 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-17
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 153
    PC sent messages Tap to scan more host computers Click or tap to send your message Tap to delete PC alerts Chapter 4 4-18 Chapter 4: Software support
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 154
    I/O connection of your user guide for more details. • USB 3.1 Boost automatically detects the USB 3.1/3.0 devices that support UASP. • The data transfer speed varies with USB devices. For a higher data transfer performance, use a USB 3.1 device. Chapter 4 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-19
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 155
    utility allows you get the detailed information of the motherboard, CPU, and memory settings. Launching the System Information To launch System view the motherboard's information. Viewing the CPU information Click or tap the CPU tab to view the processor's information. Chapter 4 4-20 Chapter
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 156
    Viewing the SPD information Click or tap the SPD tab to view the memory's information. Chapter 4 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-21
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 157
    this utility. Refer to section 2.3.1 Rear I/O connection of your user guide for more details. • The USB Charger+ does not support USB hubs and USB extension cables, and generic USB cables. • The USB Charger+ may not recognize some ASUS devices due to a special design. Chapter 4 4-22 Chapter
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 158
    4.4.8 Version Displays the installed software or utilities and their current version. Chapter 4 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-23
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 159
    to set an online budget time to your network adapters. • Traffic Analysis: Allows you to assign protocols and programs in one set. 4-24 Chapter 4: Software support Chapter 4
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 160
    plug and play convenience. Follow the installation wizard to install the Realtek® Audio Driver from the support DVD that came with the motherboard package. If the Realtek® audio software is default device button Analog and digital connector status Chapter 4 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 4-25
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 161
    . b. If you select Front Speaker Out, click or tap to select the type of speaker installed then click or tap OK. Chapter 4 4-26 Chapter 4: Software support
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 162
    5 5.1 RAID configurations The motherboard comes with the Intel® Rapid Storage Technology that supports RAID 0, RAID 1, RAID 10 and RAID 5 configuration. 5.1.1 RAID definitions RAID 0 ( use an existing drive and three new drives for this setup. Chapter 5 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 5-1
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 163
    Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal [RAID Mode]. 4. Save your changes, and then exit the BIOS Setup. Refer to Chapter 3 for details on entering and navigating through the BIOS Setup Due to chipset limitation, when SATA ports are set to
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 164
    through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. Chapter 5 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 5-3
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 165
    Creating a RAID set To create a RAID set: 1. From the utility main menu, select 1. Create RAID Volume and press . The following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ CREATE VOLUME MENU ]
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 166
    down arrow key to select a drive, and then press to select. A small triangle marks the selected drive. Press after completing your selection. 6. Use the up/down arrow key to the main menu, or to go back to the CREATE VOLUME menu. Chapter 5 ASUS SABERTOOTH Z97 MARK 2/USB 3.1 5-5
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 167
    Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: 1. From the utility main menu, select 2. Delete RAID Volume and press . The following screen appears: Name Volume0 [ DELETE VOLUME MENU
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 168
    the RAID driver from a USB flash drive, you have to use another computer to copy the RAID driver from the support DVD to the USB flash drive. To set up a Windows® UEFI operating system under RAID mode, ensure to load the UEFI driver for your optical drive. Chapter 5 ASUS SABERTOOTH Z97 MARK 2/USB
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 169
    Chapter 5 5-8 Chapter 5: RAID configurations
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 170
    radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that void the user's authority to operate this equipment. Appendices ASUS SABERTOOTH Z97 MARK 2/USB 3.1 A-1
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 171
    IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 172
    indicates that the battery should not be placed in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards governing permissions and limitations under the License. Appendices ASUS SABERTOOTH Z97 MARK 2/USB 3.1 A-3
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 173
    ai requisiti essenziali e alle altre disposizioni pertinenti alle direttive CE. Per maggiori informazioni fate riferimento alla dichiarazione di conformità CE. ASUS AsusTek Inc CE CE Hrvatski AsusTek Inc. ovim izjavljuje da je ovaj uređaj sukladan s bitnim zahtjevima i ostalim odgovaraju
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 174
    Ratingen, Germany Fax +49-2102-959911 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-1805-010923* Support Fax +49-2102-9599-11 Online support http://www.asus.com/de/support/ Appendices ASUS SABERTOOTH Z97 MARK 2/USB 3.1 A-5
  • Asus SABERTOOTH Z97 MARK 2 USB 3.1 | User Guide - Page 175
    -TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Product name : Motherboard Model name : SABERTOOTH Z97 MARK 1, SABERTOOTH Z97 MARK 1/USB 3.1, SABERTOOTH Z97 MARK 2, SABERTOOTH Z97 MARK 2/USB 3.1, SABERTOOTH Z97 MARK S conform with the essential
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
Motherboard
SABERTOOTH Z97
MARK 2/USB 3.1