Asus SCSI 320-0 LSI MegaRAID User Manual English and Traditional-Chinese Editi
Asus SCSI 320-0 Manual
View all Asus SCSI 320-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus SCSI 320-0 manual content summary:
- Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 1
LSI MegaRAID User's Manual Q2143 August 2005 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 2
OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 3
Table of Contents LSI MegaRAID Userʼs Manual About This Manual ii Chapter 1: RAID Setup 1-1 1.1 Change the Speed of SCSI Channel 1-1 1.2 RAID 0 or RAID 1 Setup 1-3 1.3 RAID 5 Setup 1-9 1.4 RAID 50 Setup 1-15 1.5 RAID 10 Setup 1-21 1.6 Rebuild the Arrays 1-27 1.7 Migration Setup 1-28 1.8 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 4
LSI MegaRAID Userʼs Manual About This Manual This manual is designed for users who have already acquired knowledge of peronal computer integration so as to help establish a powerful ASUS server. Overview The structure of this manual is listed as follows: 1. Overview : How to use this manual This - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 5
LSI MegaRAID Userʼs Manual Important: Important tips or things to be paid attention to. Note: Tips, definitions, or further explanations More Information about This Product You could get, via the following two media, information about the ASUS products you are using as well as the upgrade information - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 6
- Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 7
1 RAID Setup With step-by-step descriptions, this chapter introducess the procedures of setting up a RAID on your system at the time when system is powered on and not yet enters the operation system. - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 8
LSI MegaRAID Userʼs Manual 1.1 Change the Speed of SCSI Channel 1. Press Ctrl + H at the same time and enter the MegaRAID WebBIOS configuration window. Select with your mouse or keyboard the SCSI Channel Properties in the WebBIOS configuration menu. 2. The window will show the current operation speed - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 9
LSI MegaRAID Userʼs Manual 3. Click on the arrow of SCSI Capabilities box and open the drop down menu. The four speed selections are Fast, Ultra, Ultra-II, U160, and U320. Select a suitable speed and click the Submit button to save the new configuration. 4. If it is to disable one of the channels ( - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 10
LSI MegaRAID Userʼs Manual 1.2 RAID 0 or RAID 1 Setup 1. Press at the same time Ctrl + H and enter the MegaRAID WebBIOS configuration window where information about all physical drivers installed is displayed. Click Configuration Wizard to start RAID setup. 2. If this is the first time to setup a RAID - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 11
LSI MegaRAID Userʼs Manual 3. If the setting is to meet special requirements, please click on Custom Configuration. You could also let the Configuration Wizard to set up a RAID automatically by selecting Auto Configuration. Press Next to continue. 4. Press and hold on the Ctrl key on your keyboard and - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 12
LSI MegaRAID Userʼs Manual 5. In the right side windows you could view the information of all RAIDs (arrays). Click Accept Array and Next to continue. 6. For RAID 0 configuration, set the RAID Level as RAID 0, and input the RAID 0 size value within the circled area into the Select Size box (For - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 13
LSI MegaRAID Userʼs Manual 7. For RAID 1 configuration, set the RAID Level as RAID 1, and input the RAID 1 size value within the circled area into the Select Size box (For example: RAID 1 size= 35002 MB). Then click Accept and Next to continue. 8. The Logical Drives window now displays the status of - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 14
9. Click Yes to save the setup. LSI MegaRAID Userʼs Manual 10. Click Yes to initialize the new logical drives. 1-7 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 15
LSI MegaRAID Userʼs Manual 11. If no boot device is ever set, please select Set Boot Drive and then select Go to change the settings so that the RAID storage devices could become the first boot device. 1-8 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 16
1.3 RAID 5 Setup LSI MegaRAID Userʼs Manual 1. Press at the same time Ctrl + H and enter the MegaRAID WebBIOS configuration window where information about all physical drivers installed is displayed. Click Configuration Wizard to start the RAID settings. 2. If this is the first time to setup a RAID - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 17
LSI MegaRAID Userʼs Manual 3. If the setting is to meet individual requirements, please select Custom Configuration. You could also let the Configuration Wizard set up a RAID automatically by selecting Auto Configuration. Click Next to continue. 4. Hold on the Ctrl key on your keyboard and select with - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 18
LSI MegaRAID Userʼs Manual 5. This warning window will prompt out when hard disks of different sizes are deployed in a RAID. If hard disks of identical space are used, this window would not appear. (We recommend using hard disks of a same model for RAID configurationn) 6. You could see the - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 19
LSI MegaRAID Userʼs Manual 7. Set RAID Level as RAID 5 and input the Select Size box with the RAID 5 size value within the circled area. 8. You could see information of all RAID settings in the left side window. Click Accept to continue. 1-12 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 20
LSI MegaRAID Userʼs Manual 9. Click Yes to save the configuration, or click No to cancel the settings. 10. Click Yes to initialize the new logical drives. 1-13 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 21
LSI MegaRAID Userʼs Manual 11. If no boot device is ever set, please select Set Boot Drive and then click Go to change the settings so that the RAID storage device could become the first boot device. 1-14 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 22
RAID 50 Setup LSI MegaRAID Userʼs Manual 1. Press at the same time Ctrl + H and enter the MegaRAID WebBIOS configuration window where information about all physical drivers installed is displayed. Click Configuration Wizard to start the RAID settings. 2. If this is the first time to set up a RAID - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 23
LSI MegaRAID Userʼs Manual 3. If the setting is to meet individual requirements, please select Custom Configuration. You could also let the Configuration Wizard to set up a RAID automatically by selecting Auto Configuration. Then press Next to continue. 4. Hold on the Ctrl key on your keyboard and - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 24
LSI MegaRAID Userʼs Manual 5. The three disks are now set as Array 1. Click Accept Array to continue. 6. Then set the rest three hard disks as Array 2 and click Accept Array. Press Next to continue. 1-17 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 25
LSI MegaRAID Userʼs Manual 7. Select Array 1 and set the RAID Level as RAID5 and Span as Enabled. Then input the RAID 5 size value with spanning in the circled area into the Select Size box. Click Accept to continue. 8. You could now view all the RAID setup information in the Configuration Preview - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 26
9. Click Yes to save the configuration. LSI MegaRAID Userʼs Manual 10. Click Yes to initialize the new logical drives. 1-19 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 27
LSI MegaRAID Userʼs Manual 11. If no boot storage device is ever set, please select Set Boot Drive and then select Go to change the settings so that the RAID storage device could become the first boot device. 12. Now you could see information about all physical drives and logical drives in the home - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 28
RAID 10 Setup LSI MegaRAID Userʼs Manual 1. Press Ctrl + H at the same time and enter the MegaRAID WebBIOS configuration window, where information about all physical drivers installed is displayed. Click Configuration Wizard to start the RAID settings. 2. If this is the first time to setup a RAID - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 29
LSI MegaRAID Userʼs Manual 3. If the setting is to meet individual requirements, please select Custom Configuration. You could also let the Configuration Wizard set up a RAID automatically by selecting Auto Configuration. Click Next to continue. 4. Hold on the Ctrl key of your keyboard and select with - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 30
LSI MegaRAID Userʼs Manual 5. Select two hard disks as and set them as Array1, and the rest Array 2. At least two hard disks are needed for setting up RAID 1, and the number of disks must be even. 6. This warning window will prompt out when hard disks of different sizes are deployed in a RAID. If - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 31
LSI MegaRAID Userʼs Manual 7. You could now see information of all RAID settings. When you have finished the setting for Array 1 and Array 2, please click Next to continue. 8. Set Array 1 as RAID 1, and set the Span as Enable. Input the Select Size box with the RAID 1 size value within the circled - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 32
LSI MegaRAID Userʼs Manual 9. You could then see the information of RAID settings in the Configuration Preview window. The two arrays form a RAID 10, with the Array 2 being the continuance of the Array 1. 10. Click Yes to save the settings, or to click No to cancel the configuration. 1-25 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 33
LSI MegaRAID Userʼs Manual 11. Click Yes to initialize the new array of Logical Drives. 12. If no boot device is ever set, please select Set Boot Drive and then select Go to change the settings so that the RAID storage device could become the first boot device. 1-26 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 34
1.6 Array Rebuild LSI MegaRAID Userʼs Manual 1. When one of the hard disks within the array is removed and substituted with new disk, the array could automatically start the rebuilding process. You could check the information of the rebuilding progress in the MegaRAID WebBIOS configuration window. - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 35
LSI MegaRAID Userʼs Manual 1.7 Migration Setup 1. If new hard disks are to be installed onto the SCSI backplane, please select Scan Devices to discover the disk first. Then you will find the ready disk in the Physical Drives window. Click on Logical Drives to set up Migration. 2. There are two - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 36
1.8 Hotspare Setup LSI MegaRAID Userʼs Manual 1. Select a ready physical drive and set it as Hotspare. Note: The disks already set as a part of RAID (Online) could not be selected. 2. Select Make Hotspare and click Go to set this hard disk as Hotspare. 1-29 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 37
LSI MegaRAID Userʼs Manual 3. If it is to stop the Hotspare function, select Offline and click Go to cancel. 4. The hard disk assigned as Hotspare will be highlighted in pink characters, which means the Hotspare setting is completed. 1-30 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 38
1.9 Clear Arrays LSI MegaRAID Userʼs Manual 1. Press Ctrl + H at the same time and enter the MegaRAID WebBIOS configuration window, where information about all physical drivers installed is displayed. Click Configuration Wizard to start the setup. 2. Select Clear Configuration tab, and then click - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 39
LSI MegaRAID Userʼs Manual 3. You could find no Logical Drivers in the right side window, which means the disk arrays have already been cleared. Click Accept to continue. 4. Click Yes and save the configuration. 1-32 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 40
LSI MegaRAID Userʼs Manual 5. In the right side windows, all the storage devices are listed in the Physical Drives window, while the Logical Drives window is blank. 1-33 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 41
- Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 42
2 System Setup This chapter will guide you throught the relevant settings after entering the operation systems. - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 43
® Server 2003, RedHat Linux®, and SuSE Linux®. Next, we are to get on with the drive installation procedures for these respective OS. 2.1.1 Microsoft® Windows® Insert the support CD with the label reading LSI MegaRAID SCSI 3200/320-1 320 & ASUS AZ CRB into your optical drive and open the Driver - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 44
LSI MegaRAID Userʼs Manual 2. When a screen as follows prompts out, press S to install driver for the operation system. 3. Insert the drive disk previously prepared into the floppy drive, and press Enter. 2-2 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 45
select LSI MEGARAID Products for Windows 2003 (x86). 5. For Windows 2003 Server®, when driver program is selected, a following window would prompt out, displayig the detected preset driver of Windows 2003 Server®. Press S and select to install from the floopy disk. Then please follow the instructions - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 46
LSI MegaRAID Userʼs Manual 2.1.2 RedHat Linux® You could get access ASUS global website to download the *.zip driver. Unzip the file in Windows® OS and run the *.exe file, the driver would automatically write into the floopy disk. If the unzipped files are not *.exe file, please copy these files directly - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 47
LSI MegaRAID Userʼs Manual 3. Insert the drive disk into the floopy drive, and follow the instruction to proceed with the installation. Press Yes, and then press Enter. 4. Select fd0 to install from floopy drive. Select OK and press Enter. If a USB floopy drive is deployed, please select sda to install - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 48
LSI MegaRAID Userʼs Manual 5. The operating system now is reading from the drive disk in the floopy drive. 6. When the installation is completed, please select No and press Enter to enter the Linux® OS; if more drivers are to be installed, please select Yes and press Enter, then repeat the step 3-4 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 49
LSI MegaRAID Q2143 August 2005 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 50
Intel Xeon Pentium Intel Windows MS-DOS Microsoft 1) 2) ©2005 LSI MegaRAID Q2143 V1.0 2005 07 II - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 51
V VI VI 1.1 SCSI 1-2 1.2 RAID 0 RAID 1 1-4 1.3 RAID 5 1-10 1.4 RAID 50 1-13 1.5 RAID 10 1-22 1.6 1-28 1.7 Migration 1-29 1.8 Hotspare 1-30 1.9 1-32 2.1 2.1.1 2.1.2 SCSI RAID 2-2 Windows 2-2 Red Hat Linux 2-5 LSI MegaRAID III - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 52
1. 2. Windows 3. RAID RAID IV - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 53
1. http://tw.asus.com 2. LSI MegaRAID V - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 54
VI - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 55
Windows RAID - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 56
LSI LSI WebBIOS Ctrl+H Copyright© AMERICAN MEGATRENDS, INC. Press to Run Configuration Utility Or press for WebBIOS. WebBIOS [Start] 1.1 1. Properties SCSI WebBIOS SCSI Channel 1-2 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 57
2. 320-1 320-0 320-2 3. SCSI Capabilities Fast Ultra Ultra-II U160 U320 Submit LSI MegaRAID 1-3 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 58
4. Termination Disabled Termination Submit Enabled 1.2 RAID 0 RAID 1 1. MegaRAID BIOS Physical Drivers Configuration Wizard RAID 1-4 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 59
2. Next RAID New Configuration 3. Custom Configuration Auto Configuration Configuration Wizard RAID LSI MegaRAID 1-5 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 60
4. Accept Array RAID 1 2 Ready Drives RAID 1 2 RAID 0 2 5. RAID(Array) 1 Accept Array Next RAID 1-6 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 61
6. MB RAID RAID 0 RAID 1 Select Size Next RAID 0 Accept Next RAID Accept RAID 0 size = 70004 7. RAID 1 RAID 1 size RAID 1 size = 35002 MB Select Size Accept RAID Next LSI MegaRAID 1-7 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 62
8. Logical Drivers Accept RAID 9. Yes 1-8 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 63
10. Yes Initialize Logical Drives 11. Go RAID Set Boot Drive 1 LSI MegaRAID 1-9 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 64
1.3 RAID 5 1. MegaRAID BIOS Physical Drivers Configuration Wizard RAID 2. Next RAID New Configuration 1-10 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 65
3. Custom Configuration Auto Configuration Configuration Wizard RAID 4. 3 Ready Drives Accept Array Array 1 RAID 5 RAID 5 3 LSI MegaRAID 1-11 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 66
5. RAID 6. Next RAID Array 1 1-12 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 67
7. RAID 5 Size = RAID 5 Accept Select Size 8. RAID Accept LSI MegaRAID 1-13 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 68
9. Yes No 10. Yes Initialize Logical Drives 1-14 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 69
11. Go RAID Set Boot Drive 1 LSI MegaRAID 1-15 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 70
1.4 RAID 50 1. MegaRAID BIOS Physical Drivers Configuration Wizard RAID 2. Next RAID New Configuration 1-16 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 71
3. Custom Configuration Auto Configuration Configuration Wizard RAID 4. 6 Physical Drivers Ready RAID 50 6 8 10 LSI MegaRAID 1-17 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 72
5. Accept Array 3 3 Ready Drives Array 1 6. 3 Array 2 Accept Array Arrays Array 1 Array 2 Next 1-18 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 73
7. Array 1 RAID Enabled 5 Select Size Accept RAID 5 Span With spanning RAID RAID 5 Size = 7 1I37 1Z37 [Enable] Array 1 Configuration [Next] 8. 50 1L26 1Z26 RAID 5 R5=(size) Array 1 Array 2 Array 2 Array 1 [Spna] [Accept] RAID LSI MegaRAID 1-19 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 74
9. Yes 10. Yes Initialize Logical Drives 1-20 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 75
11. Go RAID Set Boot Drive 1 12. WebBIOS Physical Logical Drivers Array` RAID LSI MegaRAID 1-21 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 76
1.5 RAID 10 1. MegaRAID BIOS Physical Drivers Configuration Wizard RAID 2. Next RAID New Configuration 1-22 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 77
3. Custom Configuration Auto Configuration Configuration Wizard RAID 4. Accept Array RAID 10 4 2 Array 1 RAID 0 Ready Drives Array 2 LSI MegaRAID 1-23 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 78
5. RAID 6. Next Array 2 Array 1 1-24 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 79
7. Array 1 Select Size Next RAID 1 Span With Spannong RAID 1 Size = Enabled RAID 1 size Accept 7 1I37 1Z37 [Enable] Array 1 Configuration [Next] 8. 10 1L26 1Z26 RAID 1 R1=(size) Array 1 Array 2 Array 2 Array 1 [Spna] [Accept] RAID LSI MegaRAID 1-25 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 80
9. Yes No 10. Yes Initialize Logical Drives 1-26 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 81
11. Go RAID Set Boot Drive 1 LSI MegaRAID 1-27 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 82
1.6 1. Rebuild Progress MegaRAID WebBIOS 2. Rebuilding Progress Abort Go 1-28 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 83
1. SCSI backplane Scan Devices Physical Drivers Ready Logical Drivers Array Migration 2. A. RAID Migration only Array 1 1. Array RAID 2. RAID Migration RAID Migration only Go B. RAID Migration with addition Array [RAID Migration with addition] Go RAID LSI MegaRAID 1-29 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 84
1.8 Hotspare 1. Ready Physical Drives RAID Online Hotspare RAID 5 RAID 10 RAID 50 Hotspare RAID 1 RAID 2. Make Hptspare Go Hotspare 1-30 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 85
3. Hotspare 4. Go Hotspare Offline LSI MegaRAID 1-31 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 86
1.9 1. MegaRAID BIOS Physical Drivers Configuration Wizard 2. Clear Configuration Next 1-32 RAID array - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 87
3. Logical Drives Accept 4. Yes LSI MegaRAID 1-33 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 88
5. WebBIOS Physical Drivers Ready Logical Drivers 1-34 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 89
Windows RAID - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 90
2.1 SCSI RAID SCSI RAID Microsoft Windows® 2000 Windows® Server 2003 RedHat Linux® SuSE Linux® OS Operating System 2.1.1 Windows LSI MegaRAID SCSI 320-0/320-1 320 & ASUS AZ CRB Driver Windows Driver\Windows\ Windows 2000 Windows 2003 64bit SCSI RAID Windows Windows 2000 MakeDisk.exe win2003 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 91
LSI MEGARAID Products for Windows 2000 Driver Windows 2003 Server LSI MEGARAID Products for Windows 2003 (x86) Windows XP RAID 320-0 AZCRB [MegaRAID SCSI 320-0 controller] RAID 320-1 [MegaRAID SCSI 320-1 RAID controller] RAID 320-2 [MegaRAID SCSI 320- 2 RAID controller] LSI MegaRAID - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 92
6. Windows XP Windows 2003 Server Windows 7. Windows 2-4 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 93
2.1.2 Red Hat Linux Driver 9.0\Drivers\ [LSI MegaRAID] Red Hat SuSe 9.0 SCSI RAID \Driver\Linux\Redhat\2.10.8\Linux_2.10.8.2-1\Redhat and SuSe megaraid2-v2.10.8.2-rhl90-kernels.img Red Hat 9.0 *.exe MakeDisk.exe *.zip Windows 2. Linux dd Enter linux LSI MegaRAID 2-5 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 94
3. 4. Enter Yes 2-6 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 95
5. fd0 OK Enter USB 6. sda USB LSI MegaRAID 2-7 - Asus SCSI 320-0 | LSI MegaRAID User Manual English and Traditional-Chinese Editi - Page 96
7. No Enter Linux Yes Enter 34 2-8
LSI MegaRAID User’s Manual
Q2143
August 2005