Asus TS700-E8-RS8 V2 User Guide

Asus TS700-E8-RS8 V2 Manual

Get Asus TS700-E8-RS8 V2 PDF manuals and user guides View all Asus TS700-E8-RS8 V2 manuals
Add to My Manuals
Save this manual to your list of manuals

Asus TS700-E8-RS8 V2 manual content summary:

  • Asus TS700-E8-RS8 V2 | User Guide - Page 1
    TS700-E8-PS4 V2 TS700-E8-RS8 V2 Server User Guide
  • Asus TS700-E8-RS8 V2 | User Guide - Page 2
    , and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it. Product warranty or service will not be extended if: (1) the product is repaired
  • Asus TS700-E8-RS8 V2 | User Guide - Page 3
    Contents Notices ...viii Safety information...ix About this guide...xi Chapter 1: Product Introduction 1.1 System package contents 1-2 1.2 Serial number label 1-3 1.3 System hot-swap SATA/SAS hard disk drive 2-16 2.5.5 Installing a 2.5-inch hard disk drive (TS700-E8-RS8 V2 only 2-18 iii
  • Asus TS700-E8-RS8 V2 | User Guide - Page 4
    Installing an expansion card 2-21 2.7.2 Installing an ASUS PIKE II card 2-23 2.7.3 Configuring an expansion card TS700-E8-RS8 V2 only)...... 2-34 2.9.3 Chassis footpads 2-35 Chapter 3: Installation Options 3.1 Preparing the system for rack mounting 3-2 3.2 Attaching the inner rail to the server
  • Asus TS700-E8-RS8 V2 | User Guide - Page 5
    Contents 5.2 BIOS setup program 5-6 5.2.1 BIOS menu screen 5-7 5.2.2 Menu bar 5-7 5.2.3 Menu items 5-8 5.2.4 Submenu items 5-8 5.2.5 Navigation keys 5-8 5.2.6 General help 5-8 5.2.7 Configuration fields 5-8 5.2.8 Pop-up window 5-8 5.2.9 Scroll bar 5-8 5.3 Main menu 5-9 5.3.1 System Date [
  • Asus TS700-E8-RS8 V2 | User Guide - Page 6
    Memory Configuration 5-34 5.6.6 IIO Configuration 5-37 5.6.7 PCH Configuration 5-38 5.6.8 Miscellaneous Configuration 5-42 5.6.9 Server ME Configuration 5-43 5.6.10 Runtime Error Logging Support 5-43 5.7 Server Mgmt menu 5-44 5.8 Event Logs menu 5-48 5.8.1 Change Smbios Event Log Settings
  • Asus TS700-E8-RS8 V2 | User Guide - Page 7
    Installing the RAID controller driver 7-3 7.2 Software drivers and utilities installation 7-13 7.3 Running the Support DVD 7-13 7.4 Installing the drivers and utilities 7-16 7.4.1 Using the ASUS InstAll application 7-16 7.4.2 Installing a driver or utility 7-18 7.5 Running the utilities 7-20
  • Asus TS700-E8-RS8 V2 | User Guide - Page 8
    frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no , we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. viii
  • Asus TS700-E8-RS8 V2 | User Guide - Page 9
    by yourself. Contact a qualified service technician or your dealer. Operation Safety • Any mechanical operation on this server must be conducted by certified or experienced engineers. • Before operating the server, carefully read all the manuals included with the server package. • Before using the
  • Asus TS700-E8-RS8 V2 | User Guide - Page 10
    Australian Consumer Law. For the latest product warranty details please visit http:// support.asus.com. Our goods come with guarantees that cannot be excluded under the failure. If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at http://support.asus.com x
  • Asus TS700-E8-RS8 V2 | User Guide - Page 11
    a server. Contents This guide contains the following parts: 1. Chapter 1: Product introduction This chapter describes the general features of the server, including 7: Driver installation This chapter provides instructions for installing the necessary drivers for different system components. xi
  • Asus TS700-E8-RS8 V2 | User Guide - Page 12
    for product and software updates. 1. ASUS Server Web-based Management (ASWM) user guide This manual tells how to set up and use the proprietary ASUS server management utility. 2. ASUS websites The ASUS websites worldwide provide updated information for all ASUS hardware and software products. Refer
  • Asus TS700-E8-RS8 V2 | User Guide - Page 13
    Chapter 1: Product Introduction Product Introduction This chapter describes the motherboard features and the new technologies it supports. 1
  • Asus TS700-E8-RS8 V2 | User Guide - Page 14
    panel, TS700-E8-RS8 V2 only) 1 x SAS/SATA backplane (TS700-E8-PS4 V2) 2 x SAS/SATA backplanes (TS700-E8-RS8 V2) 1 x Front I/O Board 3 x System Fans (Front: 2 x 80mm x 38mm; Rear: 1 x 120mm x 38mm) 1 x Support DVD (including the User Guide) 1 x ASWM** Enterprise DVD 1 x ASMB8 DVD Accessories
  • Asus TS700-E8-RS8 V2 | User Guide - Page 15
    such as xxS0xxxxxxxx shown as the figure below. With the correct serial number of the product, ASUS Technical Support team members can then offer a quicker and satisfying solution to your problems. TS700-E8-PS4 V2 xxS0xxxxxxxx TS700-E8-RS8 V2 xxS0xxxxxxxx ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 1-3
  • Asus TS700-E8-RS8 V2 | User Guide - Page 16
    -E8-PS4 V2, TS700-E8-RS8 V2 is a Pedestal / 5U Rackmount barebone server system featuring the ASUS Z10PE-D16 WS Server Board. The server supports Intel® LGA2011-3 Intel® Xeon® E5-2600 Processor v3 plus other latest technologies through the chipsets onboard. Model Name TS700-E8-PS4 V2 TS700-E8-RS8
  • Asus TS700-E8-RS8 V2 | User Guide - Page 17
    Server CentOS Ubuntu VMWare Citrix XenServer Management Solution Software Out of Band Remote Management * Support versions are subject to change without notice. Refer to www.asus.com for updates. ASWM Enterprise ASMB8-iKVM to change without notice. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 1-5
  • Asus TS700-E8-RS8 V2 | User Guide - Page 18
    LEDs section for the LED descriptions. • * Only the first set of 4-bay HDD module is provided on TS700-E8-PS4 V2. • ** For TS700-E8-RS8 V2, six hot-swap 3.5-inch HDDs are supported by default. Upgrade the optional PIKE card before using eight hot-swap 3.5-inch HDDs. LAN port 3 LAN 1-6 Chapter
  • Asus TS700-E8-RS8 V2 | User Guide - Page 19
    1.5 Rear panel features TS700-E8-PS4 V2 Power connector PS/2 keyboard/ mouse combo port 2 x USB 2.0 ports BIOS Flashback button (RJ-45) port 1 Expansion slots * This port is for ASUS ASMB8-iKVM controller and for technicians only. LAN port 3 LAN port 1 ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 1-7
  • Asus TS700-E8-RS8 V2 | User Guide - Page 20
    TS700-E8-RS8 V2 Power connectors PS/2 keyboard/ mouse combo port 2 x USB 2.0 ports BIOS Flashback button with LED 2 x LAN (RJ-45) port 1 VGA port Expansion slots * This port is for ASUS ASMB8-iKVM controller and for technicians only. LAN port 3 LAN port 1 1-8 Chapter 1: Product Introduction
  • Asus TS700-E8-RS8 V2 | User Guide - Page 21
    Power Supply Module (TS700-E8-RS8 V2) 2. 120mm x 38mm system fan 3. ASUS Z10PE-D16 WS Server Board 4. Chassis intrusion switch 5. Expansion card locks 6. Optical drive (optional) 7. 2 x 5.25-inch drive bays 8. 4-bay HDD module (First set with backplane; TS700-E8-PS4 V2 only supports this set
  • Asus TS700-E8-RS8 V2 | User Guide - Page 22
    1.7 1.7.1 LED information Front panel LEDs Message LED HDD access LED Power LED 1 2 LAN1 LED LAN2 LED Location LED (Reserved) HDD Status LED HDD Activity LED LED Icon Display status Description Power LED HDD Access LED Message LED HDD Status LED ON System power ON OFF No activity
  • Asus TS700-E8-RS8 V2 | User Guide - Page 23
    ACT/LINK LED SPEED LED ACT/LINK LED SPEED LED SPEED LED Status Description OFF 10 Mbps connection ORANGE 100 Mbps connection GREEN 1 Gbps connection ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 1-11
  • Asus TS700-E8-RS8 V2 | User Guide - Page 24
    1-12 Chapter 1: Product Introduction
  • Asus TS700-E8-RS8 V2 | User Guide - Page 25
    Chapter 2: Hardware Information Hardware Information This chapter lists the hardware setup procedures that you have to perform when installing or removing system components. 2
  • Asus TS700-E8-RS8 V2 | User Guide - Page 26
    2.1 2.1.1 Chassis cover Removing the side cover • Ensure that you unplug the power cord before removing the side cover. • Take extra care when removing the side cover. Keep your fingers from components inside the chassis that can cause injury, such as the CPU fan, rear fan, and other sharp-edged
  • Asus TS700-E8-RS8 V2 | User Guide - Page 27
    the side cover toward the front panel until it snaps in place. 3. Drive in the two screws you removed earlier to secure the side cover. 1 3 1 2 3 ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-3
  • Asus TS700-E8-RS8 V2 | User Guide - Page 28
    is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA 2011-3 socket. • The product warranty
  • Asus TS700-E8-RS8 V2 | User Guide - Page 29
    lever 3. Press the right load lever with your thumb (D), move it to the left (E) until it is released from then gently lift the load lever (F). ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-5
  • Asus TS700-E8-RS8 V2 | User Guide - Page 30
    4. Push the left load lever to slightly lift the load plate (G). Do not insert the load lever into the retention tab. 5. Hold the edge then gently lift the load plate (H). Edge of the Load plate Load plate 6. Get the CPU. 7. Align and position the CPU over the socket ensuring that the triangle
  • Asus TS700-E8-RS8 V2 | User Guide - Page 31
    the PnP cap. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the PnP cap on the LGA 2011 socket. PnP cap 11. Push down the left load lever (L) then insert it under the retention tab (M). Retention tab ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-7
  • Asus TS700-E8-RS8 V2 | User Guide - Page 32
    12. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with. • Ensure that the Thermal Interface Material is spread in an even thin layer. • Some heatsinks come with pre-applied Thermal Interface Material. If so, skip this step. The Thermal
  • Asus TS700-E8-RS8 V2 | User Guide - Page 33
    CPU, ensuring that the four screws match the holes on the support plate, and the arrow on the fan faces the rear panel of the server chassis. 2. Twist each of the four screws with a A B B A Tighten the four heatsink screws in a diagonal sequence. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-9
  • Asus TS700-E8-RS8 V2 | User Guide - Page 34
    , and 32 GB RDIMMs or 32 GB and 64 GB LR-DIMMs into the DIMM sockets using the memory configurations in this section. • Refer to ASUS Server AVL for the updated list of compatible DIMMs. • When installing DIMMs, always start from slot A1 (CPU1) and E1 (CPU2). • Always install DIMMs with the
  • Asus TS700-E8-RS8 V2 | User Guide - Page 35
    (CPU2) A2 A1 B2 B1 C2 C1 D2 D1 E2 E1 F2 F1 G2 G1 H2 H1 2 DIMMs P P 4 DIMMs P P P P 8 DIMMs P P P P P P P P 12 DIMMs P P P P P PPPPP P P 16 DIMMs P P P P P P P P P P P P P P P P ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-11
  • Asus TS700-E8-RS8 V2 | User Guide - Page 36
    with the motherboard package. • Refer to the user guide for qualified vendor lists of the memory modules. 2.3.4 Removing a DIMM from a single clip DIMM socket 1. Press the retaining clip outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your fingers when
  • Asus TS700-E8-RS8 V2 | User Guide - Page 37
    panel assembly: 1. Hook the other side of the front panel assembly to the chassis. 2. Swing the front panel assembly and snap it back into place. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-13
  • Asus TS700-E8-RS8 V2 | User Guide - Page 38
    2.5 SATA/SAS hard disk drives The system comes with two sets of hard disk drive modules. TS700-E8-PS4 V2 supports the first set as default. TS700-E8-RS8 V2 supports both sets. Each hard disk drive module, including externally removable trays for mounting four hot-swap SATA/SAS hard disk drives,
  • Asus TS700-E8-RS8 V2 | User Guide - Page 39
    pushed back clockwise. 5. Lock the cage latch properly. 6. Connect the appropriate cables to the SATA/SAS backplane on the HDD module cage. 3 2 4 5 By default, only TS700-E8-RS8 V2 supports the second set of HDD module. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-15
  • Asus TS700-E8-RS8 V2 | User Guide - Page 40
    2.5.3 Removing the backplane DO NOT remove the backplane unless necessary! 1. Remove all hot-swap HDD trays from the chassis. 2. Disconnect all cables from the SATA/ SAS backplane. 3. Loosen the four screws on the backplane. 4. Firmly hold the backplane, and turn it in the direction of the arrow. 5.
  • Asus TS700-E8-RS8 V2 | User Guide - Page 41
    a small fraction of the tray edge protrudes. When installed, the SATA/SAS connector on the drive connects to the SATA/SAS interface on the backplane. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-17
  • Asus TS700-E8-RS8 V2 | User Guide - Page 42
    6 if you wish to install a second SATA/SAS drive. 2.5.5 Installing a 2.5-inch hard disk drive (TS700-E8-RS8 V2 only) The system comes with two hot-swap 2.5-inch hard disk drives on the rear panel for mounting SATA want to install and its bundled screws. Support beam 2-18 Chapter 2: Hardware Setup
  • Asus TS700-E8-RS8 V2 | User Guide - Page 43
    will see the edge of the drive tray is in align with the chassis cover. 9. Repeat steps 1 to 8 to install other 2.5-inch hard disk drives. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-19
  • Asus TS700-E8-RS8 V2 | User Guide - Page 44
    2.6 5.25-inch or 3.5-inch drives Ensure to unplug the power cable before installing or removing any system components. Failure to do so may cause damage to the motherboard and other system components! The system comes with three 5.25-inch drive bays located on the upper front part of the chassis
  • Asus TS700-E8-RS8 V2 | User Guide - Page 45
    . TS700-E8-RS8 V2 supports only one GPU card. 2. Remove the side chassis cover. Lay the system on its side on a flat, stable surface. 3. Release the screws on the metal slot cover where you wish to install the expansion card. 4. Remove the metal slot cover. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2
  • Asus TS700-E8-RS8 V2 | User Guide - Page 46
    5. Align the card's golden fingers with the slot, and then press firmly until the card is completely seated on the slot. 6. Secure the expansion card with the screws that you removed earlier in step 3. 7. When installing a PCIe x16 graphics card that requires external power supply, connect the 6+2
  • Asus TS700-E8-RS8 V2 | User Guide - Page 47
    an ASUS PIKE II card on the provided PCI-E slot onboard. To install an ASUS PIKE II card: 1. Remove the default cable from the motherboard and the backplane. 2. Remove the screw on the metal cover and then remove the metal cover, put them aside for future use. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2
  • Asus TS700-E8-RS8 V2 | User Guide - Page 48
    are totally inserted into the slot. 5. Connect the two mini-SAS HD cables to the ASUS PIKE II card. Connect only one (1) mini-SAS HD cable to ASUS PIKE II connector 1 for TS700-E8-PS4 V2. connect to ASUS PIKE II connector 2 connect to ASUS PIKE II connector 1 2-24 Chapter 2: Hardware Setup
  • Asus TS700-E8-RS8 V2 | User Guide - Page 49
    ASUS PIKE II card to connector 1 on the backplane and connector 2 on the ASUS PIKE II card to connector 2 on the backplane using two miniSAS HD cables. Connect only one (1) mini-SAS HD cable to backplane connector 1 for TS700-E8-PS4 V2. connector 2 connector 1 ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2
  • Asus TS700-E8-RS8 V2 | User Guide - Page 50
    2.7.3 Configuring an expansion card After installing the expansion card, configure it by adjusting the software settings. 1. Turn on the system and change the necessary BIOS settings, if any. See Chapter 5 for information on BIOS setup. 2. Assign an IRQ to the card. Refer to the following tables. 3.
  • Asus TS700-E8-RS8 V2 | User Guide - Page 51
    Expansion slots PCIEX16_1 PCIEX16_2 PCIEX16_3 PCIEX16_4 PCIEX16_5 PCIEX16_6 1 x PCIE x16 (x8 Gen3 Link) 1 x PCIE X16 (x16 Gen3 Link) 1 x PCIE x16 (x8 Gen3 Link) 1 x PCIE X16 (x16 Gen3 Link) 1 x PCIE x16 (x16 Gen3 Link) 1x PCIE x16 (x16 Gen3 Link) ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-27
  • Asus TS700-E8-RS8 V2 | User Guide - Page 52
    2.7.4 Installing an M.2 expansion card You can install an M.2 expansion card on the provided M.2 socket (labeled M2) onboard. To install an M.2 expansion card: 1. Remove the screw on the M.2 socket and set it aside. 2. Find your M.2 expansion card. M2 socket The illustrations below vary with models
  • Asus TS700-E8-RS8 V2 | User Guide - Page 53
    optical drive or rear 2.5-inch SATA/SAS backplane) 8. System auxiliary panel connector (from motherboard to front I/O board) 9. System panel connector (from motherboard to front I/O board) ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-29
  • Asus TS700-E8-RS8 V2 | User Guide - Page 54
    SATA/SAS backplane cabling The system comes with a pre-installed SATA/SAS backplane. The SATA/SAS backplane has four 22-pin SATA/SAS connectors to support Serial ATA hard disk drives and SAS hard disk drives. The backplane design incorporates a hot-swap feature to allow easy connection or removal of
  • Asus TS700-E8-RS8 V2 | User Guide - Page 55
    MSAS_HD1 BPSMB1 PWR1 BPSMB1 Description Connects to SATA SGPIO1 connector on the motherboard or connects to SATA/SAS connectors on the ASUS PIKE II card. Connects to AUX_PANEL1 connector on the motherboard Connects to 4-pin plug of the power supply ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-31
  • Asus TS700-E8-RS8 V2 | User Guide - Page 56
    bays. 3. Squeeze the front system fan latches (step a) and pull out the front system fan (step b), as shown in the right figure. 4. Follow the previous instructions in reverse to reinstall the front system fan. 2-32 a LAN port 3 LAN port 1 b a Chapter 2: Hardware Setup
  • Asus TS700-E8-RS8 V2 | User Guide - Page 57
    shown in the figure below. a a b 2. Unplug the system fan cable from the REAR_FAN1 connector on the motherboard. 3. Carefully remove the system fan. Follow the previous instructions in reverse to reinstall the rear system fan. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-33
  • Asus TS700-E8-RS8 V2 | User Guide - Page 58
    2.9.2 Redundant power supply module (TS700-E8-RS8 V2 only) To install the redundant power supply module: 1. Locate the redundant power supply you want to remove on the rear panel of your chassis. Move
  • Asus TS700-E8-RS8 V2 | User Guide - Page 59
    Kit" user guide for instructions. To remove the footpads: 1. Lay the system chassis on its side. 2. Remove the footpad by rotating it counterclockwise with a Philips (cross) screwdriver. 3. Repeat steps 1 and 2 to remove the other three footpads. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 2-35
  • Asus TS700-E8-RS8 V2 | User Guide - Page 60
    2-36 Chapter 2: Hardware Setup
  • Asus TS700-E8-RS8 V2 | User Guide - Page 61
    Chapter 3: Installation Options Installation Options This chapter describes how to install the optional components and devices into the barebone server. 3
  • Asus TS700-E8-RS8 V2 | User Guide - Page 62
    are purchased separately. • We recommend that you allot at least 1U space above the server system to ensure optimal thermal performance. Removing the footpads Refer to section 2.9.3 Chassis footpads for instructions on removing the footpads. Removing the top cover Unscrew and slide the top cover
  • Asus TS700-E8-RS8 V2 | User Guide - Page 63
    to the rack To attach the rails to the rack: 1. Select one unit of space (1U) on the rack where you wish to install the server. 1U space 2. Drive in two screws on the rack rails. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 3-3
  • Asus TS700-E8-RS8 V2 | User Guide - Page 64
    the rack front, find the corresponding 1U space for the second rail pair. 7. Repeat steps 3-6 to attach the second rail pair. 3.4 Mounting the server to the rack To mount the server to the rack: 1. Align the server rails with the rack rails. 2. Press the lock on side of the rail and slide the
  • Asus TS700-E8-RS8 V2 | User Guide - Page 65
    Chapter 4: Motherboard Info Motherboard Info This chapter includes the motherboard layout and brief descriptions of the jumpers and internal connectors. 4
  • Asus TS700-E8-RS8 V2 | User Guide - Page 66
    ) 2. Baseboard Management Controller LED (BMC_LED1) 3. Location LED (LOCLED2) 4. CATT LED (CATTERR_LED1) 5. CPU Warning LED (ERR_CPU1, ERR_CPU2) 6. M2 LED (M2_LED) 7. ASUS Dr. Power LED (PGLED3) 8. Q-Code LED (LED1) Page 4-4 4-4 4-5 4-5 4-6 4-6 4-7 4-8 4-2 Chapter 4: Motherboard Information
  • Asus TS700-E8-RS8 V2 | User Guide - Page 67
    . Front panel audio connector (10-1 pin AAFP) Page 4-18 4-18 4-19 4-19 4-20 4-20 4-21 4-22 4-22 4-23 4-23 4-24 4-25 4-26 4-27 4-27 4-28 ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-3
  • Asus TS700-E8-RS8 V2 | User Guide - Page 68
    , ERR_DIMMG1, ERR_DIMMH1) These LEDs light up to indicate an error in its nearby DIMM. 2. Baseboard Management Controller LED (BMC_LED1) The BMC LED works with the ASUS ASMB8 management device and indicates its initiation status. When the PSU is plugged and the system is OFF
  • Asus TS700-E8-RS8 V2 | User Guide - Page 69
    software. The Location LED helps visually locate and quickly identify the server in error on a server rack. 4. CATT LED (CATTERR_LED1) The CATT LED indicates that the system has experienced a fatal or catastrophic error and cannot continue to operate. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-5
  • Asus TS700-E8-RS8 V2 | User Guide - Page 70
    5. CPU Warning LED (ERR_CPU1, ERR_CPU2) The CPU warning LEDs light up to indicate failure on either CPU1, CPU2, or both. 6. M2 LED (M2_LED) This LED lights up to indicate that the installed M.2 (NGFF) card is being accessed. 4-6 Chapter 4: Motherboard Information
  • Asus TS700-E8-RS8 V2 | User Guide - Page 71
    7. ASUS Dr. Power LED (PGLED3) This LED near the Dr. Power switch lights up when the Dr. Power switch is on Enable. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-7
  • Asus TS700-E8-RS8 V2 | User Guide - Page 72
    8. Q-Code LED (LED1) The Q-Code LED design provides you the 2-digit display, allowing you to know the system status. Refer to the Q-code table below for details. Q-Code table Code 00 01 02 03 04 06 07 08 09 0A 0B 0C - 0D 0E 0F 10 11 - 14 15 - 18 19 - 1C 2B - 2F 30 Description Not used Power on.
  • Asus TS700-E8-RS8 V2 | User Guide - Page 73
    - 3E 4F 50 - 53 54 55 56 57 58 59 5A 5B 5C - 5F E0 E1 E2 E3 E4 - E7 E8 E9 EA EB EC - EF F0 F1 F2 F3 F4 F5 - F7 F8 F9 FA FB - FF 60 61 62 Description future AMI error codes DXE Core is started NVRAM initialization Installation of the PCH Runtime Services ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-9
  • Asus TS700-E8-RS8 V2 | User Guide - Page 74
    Q-Code table (continued) Code 63 - 67 68 69 6A 6B - 6F 70 71 72 73 - 77 78 79 7A - 7F 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E - 9F A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB Description CPU DXE initialization is started PCI host bridge initialization System Agent DXE initialization is started System
  • Asus TS700-E8-RS8 V2 | User Guide - Page 75
    ASL (see ASL Status Codes section below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM into ACPI mode. Interrupt controller is in APIC mode. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-11
  • Asus TS700-E8-RS8 V2 | User Guide - Page 76
    4.3 Onboard buttons, switches and jumpers 4.3.1 Onboard buttons and switches Onboard switches allow you to fine-tune performance when working on a bare or opencase system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. Power-on The
  • Asus TS700-E8-RS8 V2 | User Guide - Page 77
    3. Dr. Power switch (DR_POWER) Toggle this switch to enable or disable the Dr. Power feature of the system. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-13
  • Asus TS700-E8-RS8 V2 | User Guide - Page 78
    4.3.2 Jumpers 1. Clear RTC RAM (CLRTC1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system
  • Asus TS700-E8-RS8 V2 | User Guide - Page 79
    pins 1-2 to activate the VGA feature. 3. SMBUS connection setting (TESLA_M_SW) This jumper allows you to select the connection to BMC or PHC for PCIE 1/3/5/7 SMBUS. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-15
  • Asus TS700-E8-RS8 V2 | User Guide - Page 80
    4. RAID selection jumper setting (3-pin RAID_SEL1) This jumper allows you to select the PCH SATA RAID mode to use LSI MegaRAID software or Intel® Rapid Storage Technology enterprise 3.0 RAID. Place the jumper caps over pins 1-2 if you want to use the LSI MegaRAID software RAID Utility (default);
  • Asus TS700-E8-RS8 V2 | User Guide - Page 81
    . 7. PMBus 1.2 PSU select jumper (3-pin SMART_PSU1) This jumper allows you to select PSU PMBus version. Set to pins 1-2 for PMBus, set to pins 2-3 for others. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-17
  • Asus TS700-E8-RS8 V2 | User Guide - Page 82
    USB78 and USB910, then install the modules to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. 4-18 Chapter 4: Motherboard Information
  • Asus TS700-E8-RS8 V2 | User Guide - Page 83
    and rear fan connectors (4-pin CPU_FAN1-2, FRNT_FAN1-5, REAR_FAN1-2) The fan connectors support cooling fans. Connect the fan cables to the fan connectors on the motherboard the fan connectors! • All fans feature the ASUS Fan Speed Control technology. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-19
  • Asus TS700-E8-RS8 V2 | User Guide - Page 84
    5. Power supply SMBus connector (PSUSMB1) This connector supplies power for low-speed system management communications. 6. Serial port connectors (10-1 pin COM1) These connectors are for the serial (COM) port. Connect the serial port module cable to one of these connectors, then install the module
  • Asus TS700-E8-RS8 V2 | User Guide - Page 85
    disk drives, you can use a software RAID solution to create a RAID 0, RAID 1, RAID 5, or a RAID 10 configuration. For more information on the SATA RAID solutions supported on this motherboard, refer to the RAID Configuration chapter of this user guide. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-21
  • Asus TS700-E8-RS8 V2 | User Guide - Page 86
    SATA1~4. SSGPIO1 is the jumper for SSATA1~4. 9. M.2 (NGFF) connector (NGFF1) This connector allows you to install an M.2 device. This connector supports type 2260 / 2280 / 22110 devices on both PCI-E and SATA interface. The M.2 (NGFF) device is purchased separately 4-22 Chapter 4: Motherboard
  • Asus TS700-E8-RS8 V2 | User Guide - Page 87
    devices. The system may become unstable or may not boot up if the power is inadequate. • This motherboard supports EATX2.0 PSU or later version. • Ensure that your power supply unit (PSU) can provide at least the minimum power required by your system. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-23
  • Asus TS700-E8-RS8 V2 | User Guide - Page 88
    12. Chassis Intrusion (2-pin INTRUSION) These leads are for the intrusion detection feature for chassis with intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high level signal to these leads to record a chassis intrusion event. The default
  • Asus TS700-E8-RS8 V2 | User Guide - Page 89
    13. System panel connector (20-1 pin PANEL1) This connector supports several chassis-mounted functions. (1) System power LED (3-pin PLED) This 3-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-25
  • Asus TS700-E8-RS8 V2 | User Guide - Page 90
    14. Auxiliary panel connector (20-2 pin AUX_PANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, and LAN LEDs. (1) Front panel SMB (6-1 pin FPSMB) These leads connect the front panel SMBus cable. (2) LAN activity LED (2-pin LAN12_LED) These
  • Asus TS700-E8-RS8 V2 | User Guide - Page 91
    install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. 16. VGA connector (VGA_HDR1) This connector supports the VGA High Dynamic-Range interface. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 4-27
  • Asus TS700-E8-RS8 V2 | User Guide - Page 92
    17. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. • We recommend that
  • Asus TS700-E8-RS8 V2 | User Guide - Page 93
    Chapter 5: BIOS setup BIOS Setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. 5
  • Asus TS700-E8-RS8 V2 | User Guide - Page 94
    disk drive in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the BUPDATER utility. 5.1.1 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the
  • Asus TS700-E8-RS8 V2 | User Guide - Page 95
    perform the BIOS update process. Reboot the system when the update process is done. • This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO NOT F5> and select Yes to load the BIOS default settings. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-3
  • Asus TS700-E8-RS8 V2 | User Guide - Page 96
    file for the motherboard. Save the BIOS file to a bootable USB flash disk drive. 2. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support website at support.asus.com to the bootable USB flash disk drive you created earlier. 3. Boot the system in DOS mode, then at the prompt, type: BUPDATER
  • Asus TS700-E8-RS8 V2 | User Guide - Page 97
    4. The utility verifies the file, then starts updating the BIOS file. ASUS Tek. EzFlash Utility Current Platform Platform : Z10PE-D8 WS Version : 0215 Build date: 05/13 from the hard disk drive. The BIOS update is finished! Please restart your system. C:\> ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-5
  • Asus TS700-E8-RS8 V2 | User Guide - Page 98
    5.2 BIOS setup program This motherboard supports a programmable firmware chip that you can update using the provided utility not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. 5-6 Chapter 5: BIOS Setup
  • Asus TS700-E8-RS8 V2 | User Guide - Page 99
    the advanced system settings IntelRCSetup For changing the Intel RC settings Server Mgmt For changing the Server Mgmt settings Event Logs For changing the event log settings Monitor section of the menu screen to display the Tool and Exit menus. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-7
  • Asus TS700-E8-RS8 V2 | User Guide - Page 100
    5.2.3 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Event Logs, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. 5.2.4 Submenu items A solid
  • Asus TS700-E8-RS8 V2 | User Guide - Page 101
    . 5.3.1 System Date [Day xx/xx/xxxx] Allows you to set the system date. 5.3.2 System Time [xx:xx:xx] Allows you to set the system time. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-9
  • Asus TS700-E8-RS8 V2 | User Guide - Page 102
    settings. Ai Overclock Tuner [Auto] Allows you to optimize the CPU Core Ratio, BCLK Frequency, or memory parameters. Configuration options: [Auto] [Manual] [OC Tune] Spread Spectrum [Auto] Allows you to enable or disable the spread spectrum. Configuration options: [Auto] [Enabled] [Disabled] Xeon
  • Asus TS700-E8-RS8 V2 | User Guide - Page 103
    and the system stability. Configure a higher frequency to increase the overclocking range or a lower frequency to enhance the system stability. Configuration options: [Auto] [Manual] DRAM-AB/CD/EF/GH Power Phase Control [Auto] This is for the power supply ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-11
  • Asus TS700-E8-RS8 V2 | User Guide - Page 104
    CPU1/2 Input Voltage [Auto] This is the input voltage for the processor by the external voltage regulator. DRAM Voltage(CHA, CHB)/(CHC, CHD)/(CHE, CHF)/(CHG, CHH) [Auto] Power supply for the DRAM. VCCIO Offset Mode Sign [+] [+] VCCIO Voltage Offset by a positive value. [-] VCCIO Voltage
  • Asus TS700-E8-RS8 V2 | User Guide - Page 105
    can cause the system to malfunction. Front Panel Type [HD Audio] Allows you to select the Front Panel Type audio. Configuration options: [HD Audio] [AC97] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-13
  • Asus TS700-E8-RS8 V2 | User Guide - Page 106
    5.5.1 ACPI Settings Enable ACPI Auto Configuration [Disabled] Allows you to enable or disable the BIOS ACPI Auto Configuration. Configuration options: [Disabled] [Enabled] Enable Hibernation [Enabled] Allows you to enable or disable the ability of the system to hibernate (OS/Sleep State).
  • Asus TS700-E8-RS8 V2 | User Guide - Page 107
    ; IRQ=4;] [IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-15
  • Asus TS700-E8-RS8 V2 | User Guide - Page 108
    5.5.4 Onboard LAN I210 Configuration Intel LAN1/LAN2 Enable [Enabled] Allows you to enable or disable the Intel LAN. Configuration options: [Disabled] [Enabled] Intel LAN ROM Type [PXE] Allows you to select the Intel LAN ROM type. Configuration options: [Disabled] [PXE] [iSCSI] 5-16 Chapter 5:
  • Asus TS700-E8-RS8 V2 | User Guide - Page 109
    how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-17
  • Asus TS700-E8-RS8 V2 | User Guide - Page 110
    Terminal data. Configuration options: [Disabled] [Enabled] Legacy OS Redirection Resolution [80x24] This allows you to set the number of rows and columns supported on the Legacy OS. Configuration options: [80x24] [80x25] Putty Keypad [VT100] This allows you to select the FunctionKey and Keypad on
  • Asus TS700-E8-RS8 V2 | User Guide - Page 111
    : [9600] [19200] [57600] [115200] Flow Control [None] Microsoft Windows Emergency Management Services (EMS) allow for remote management of a Windows Server OS through a serial port. Configuration options: [None] [Hardware RTS/CTS] [Software Xon/Xoff] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-19
  • Asus TS700-E8-RS8 V2 | User Guide - Page 112
    5.5.6 APM Allows you to configure the Advance Power Management (APM) settings. Restore AC Power Loss [Last State] When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
  • Asus TS700-E8-RS8 V2 | User Guide - Page 113
    computing performance depending on the applications. Ensure that your thermal solution and power supply are available to handle this circumstance. Configuration Options: [Normal] [High] [Extreme] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-21
  • Asus TS700-E8-RS8 V2 | User Guide - Page 114
    decoded in above 4G address space. It only works if the system supports 64-bit PCI decoding. Configuration options: [Disabled] [Enabled] SR-IOV Support [Disabled] This option enables or disables SIngle Root IO Virtualization Support if the system has SRIOV capable PCIe devices. Configuration options
  • Asus TS700-E8-RS8 V2 | User Guide - Page 115
    PXE Boot Support. If disabled, Ipv6 PXE boot option will not be created. Configuration options: [Disabled] [Enabled]. PXE boot wait time [0] Wait time to press ESC key to abort the PXE boot. Media detect time [0] Wait time (in seconds) to detect media. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-23
  • Asus TS700-E8-RS8 V2 | User Guide - Page 116
    [Enabled] This option allows you to enable or disable CSM Support. Configuration options: [Disabled] [Enabled] GateA20 Active [Upon Request] This allows you to set the GA20 option. Configuration options: [Upon Request] [Always] Option ROM Messages [Force
  • Asus TS700-E8-RS8 V2 | User Guide - Page 117
    5.5.11 Trusted Computing Configuration Security Device Support [Disabled] Allows you to enable or disable the BIOS support for security device. Configuration options: [Disabled] [Enabled] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-25
  • Asus TS700-E8-RS8 V2 | User Guide - Page 118
    change should be claimed by XHCI driver. Configuration options: [Disabled] [Enabled] EHCI Hand-off [Disabled] This is a workaround for 0Ses without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. Configuration options: [Disabled] [Enabled] USB Mass Storage Driver
  • Asus TS700-E8-RS8 V2 | User Guide - Page 119
    take before it properly reports itself to the host controller. Configuration options: [Auto] [Manual] Mass Storage Devices AMI Virtual CDROM0 / Floppy0 / HDisk0 1.00 [Auto] Allows ] 5.5.13 iSCSI Configuration Allows you to configure the iSCSi parameters. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-27
  • Asus TS700-E8-RS8 V2 | User Guide - Page 120
    5.6 IntelRCSetup menu The IntelRCSetup menu items allow you to change the processor and chipset settings. 5-28 Chapter 5: BIOS Setup
  • Asus TS700-E8-RS8 V2 | User Guide - Page 121
    return 0. Configuration options: [Disabled] [Enabled] Enable Intel TXT Support [Disabled] This item enables Intel Trusted Execution Technology Configuration. Configuration options Takes effect after reboot. Configuration options: [Disabled] [Enabled] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-29
  • Asus TS700-E8-RS8 V2 | User Guide - Page 122
    . Configuration options: [Disabled] [Enabled] AES-NI [Enabled] This Item allows you to enable or disable the AES-NI support. Configuration options: [Disabled] [Enabled] Down Stream PECI [Disabled] This Item allows you to enable the PCIe Down Stream PECI writer. Configuration options: [Disabled
  • Asus TS700-E8-RS8 V2 | User Guide - Page 123
    BIAS setting. [Balanced Performance] Allows you to set the Energy Performance Bias which overrides the OS setting. Configuration options: [Performance] [Balanced Performance] [Balanced Power] [Power] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-31
  • Asus TS700-E8-RS8 V2 | User Guide - Page 124
    Power/Performance Switch [Enabled] Allows you to switch between Power or performance. Configuration options: [Disabled] [Enabled] Workload Configuration [Balanced] Optimization for the workload characterization. Configuration options: [Balanced] [I/O sensitive] Averaging Time Window [23] This is
  • Asus TS700-E8-RS8 V2 | User Guide - Page 125
    [Auto] This item allows you to disable or enable cluster on Die. Configuration options: [Auto] [Disable] [Enable] Early Snoop [Auto] Configuration options: [Disabled] [Enabled] [Auto] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-33
  • Asus TS700-E8-RS8 V2 | User Guide - Page 126
    [Enabled] Allows you to enable or disable halt on mem Training Error. Configuration options: [Disabled] [Enabled] ECC Support [Auto] Allows you to enable or disable the ECC support. Configuration options: [Auto] [Disabled] [Enabled] Enhanced Log Parsing [Disabled] Allows you to enable or disable the
  • Asus TS700-E8-RS8 V2 | User Guide - Page 127
    options: [Auto] [Disabled] [Enabled] MEMHOT Throttling Mode [Input-only] Allows you to shutdown MDLL during SR when enabled. Configuration options: [Disabled] [Input-only] [Output-only] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-35
  • Asus TS700-E8-RS8 V2 | User Guide - Page 128
    Interleave] Memory RAS Configuration RAS Mode [Disabled] Allows you to enable or disable RAS Modes. Enabling Sparing and Mirroring is not supported. In case enabled, Sparing will be selected. Configuration options: [Disabled] [Mirror] [Lockstep Mode] Memory Rank Sparing [Disabled] Allows you to
  • Asus TS700-E8-RS8 V2 | User Guide - Page 129
    special table for TX_EQ and vendor specific cards. Configuration options: [Disabled] [Enabled] PCI-E ASPM Support (Global) [L1 Only] This option enables or disables the ASPM support for all downstream devices. Configuration options: [Disabled] [L1 Only] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-37
  • Asus TS700-E8-RS8 V2 | User Guide - Page 130
    5.6.7 PCH Configuration PCH Devices DeepSx Power Policies [Disabled] Allows you to configure the DeepSx Mode configuration. Configuration options: [Disabled] [Enabled in S5] [Enabled in S4 and S5] PCI Express Configuration PCH DMI ASPM [Enabled] Allows you to configure the PCH DMI ASPM.
  • Asus TS700-E8-RS8 V2 | User Guide - Page 131
    Support Aggressive Link Power (SALP) Management. Configuration options: [Disabled] [Enabled] SATA Port 1/ SATA Port 2/ SATA Port 3/ SATA Port 4 Port 1/ Port 2/ Port 3/ Port 4 Allows you to enable or disable the SATA port Configuration options: [Disabled] [Enabled] ASUS TS700-E8-PS4 V2, TS700-E8-RS8
  • Asus TS700-E8-RS8 V2 | User Guide - Page 132
    connected to Solid State Drive or Hard Disk Drive. Configuration options: [IDE] [AHCI] [RAID] Support Aggressive Link Power Management [Enabled] Allows you to enable or disable the Support Aggressive Link Power (SALP) Management. Configuration options: [Disabled] [Enabled] SATA Port 1-6 Port 1/ Port
  • Asus TS700-E8-RS8 V2 | User Guide - Page 133
    the USB Ports Per-Port Disable Control is set to [Enabled]. USB Port #1/ #2/ #3/ #4/ #5/ #6 [Enabled] Configuration options: [Disabled] [Enabled] USB 3.0 Port #1/ #2/ #3/ #4/ #5/ #6 [Enabled] Configuration options: [Disabled] [Enabled] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-41
  • Asus TS700-E8-RS8 V2 | User Guide - Page 134
    Azalia Configuration Azalia [Auto] Allows you to enable or disable the control detection of the Azalia device. Configuration options: [Auto] [Disabled] [Enabled] Platform Thermal Configuration PCH Thermal Device [Auto] Allows you to enable or disable the PCH Thermal Device (D31:F6). Configuration
  • Asus TS700-E8-RS8 V2 | User Guide - Page 135
    enable or disable the WHEA support. Configuration options: [Disabled] [Enabled] Memory Error Enabling Memory corrected Error enabling [Disabled] This item allows you to enable or disable Memory corrected Errors. Configuration options: [Disabled] [Enabled] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-43
  • Asus TS700-E8-RS8 V2 | User Guide - Page 136
    Mgmt menu The Server Management menu displays the server management status and allows you to change the settings. OS Watchdog Timer [Disabled] This item allows you to start a BIOS timer which can only be
  • Asus TS700-E8-RS8 V2 | User Guide - Page 137
    the logging of EFI Status Codes, or log only error code, or only progress code or, both. Configuration options: [Disabled] [Both] [Error code] [Progress code] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-45
  • Asus TS700-E8-RS8 V2 | User Guide - Page 138
    BMC network configuration The sub-items in this configuration allow you to configure the BMC network parameters. BMC network configuration The sub-items in this configuration allow you to configure the BMC network parameters. Configuration Address source DM_LAN1/Shared LAN [Unspecified] This item
  • Asus TS700-E8-RS8 V2 | User Guide - Page 139
    source [Unspecified] Select to configure LAN channel parameters statically or dynamically(by BIOS or BMC). Configuration options: [Unspecified] [Static] [Dynamic-Obtained by BMC running DHCP] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-47
  • Asus TS700-E8-RS8 V2 | User Guide - Page 140
    5.8 Event Logs menu The Event Logs menu items allow you to change the event log settings and view the system event logs. 5.8.1 Change Smbios Event Log Settings Press to change the Smbios Event Log configuration. All values changed here do not take effect until computer is restarted.
  • Asus TS700-E8-RS8 V2 | User Guide - Page 141
    5.8.2 View Smbios Event Log Press to view all smbios event logs. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-49
  • Asus TS700-E8-RS8 V2 | User Guide - Page 142
    appears only when CPU FAN1&2 FRNT FAN1 mode is set to [Manual Mode]. This item allows you to configure the fan duty setting from 10% to 100%. FRNT FAN2&3/4&5 mode; REAR FAN1&2 mode [Generic Speed] Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan speeds for more
  • Asus TS700-E8-RS8 V2 | User Guide - Page 143
    . To clear the administrator password, follow the same steps as in changing an administrator password, but press when prompted to create/confirm the password. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-51
  • Asus TS700-E8-RS8 V2 | User Guide - Page 144
    User Password To set a user password: 1. Select the User Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. To change a user password: 1. Select the User Password item and press . 2. From the
  • Asus TS700-E8-RS8 V2 | User Guide - Page 145
    save all secure boot variables. Select Yes if you want to save all secure boot variables, otherwise select No. Configuration options: [Set New] [Delete] [Append] ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-53
  • Asus TS700-E8-RS8 V2 | User Guide - Page 146
    5.11 Boot menu The Boot menu items allow you to change the system boot options. Setup Prompt Timeout [xx] Use the and keys to adjust the number of seconds to wait for setup activation key. Bootup NumLock State [On] Allows you to select the power-on state for the NumLock. Configuration
  • Asus TS700-E8-RS8 V2 | User Guide - Page 147
    allow you to configure options for special functions. Select an item then press to display the submenu. ASUS EZ Flash Allows you to run ASUS EZ Flash BIOS ROM Utility when you press . Refer to the ASUS EZ Flash Utility section for details. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-55
  • Asus TS700-E8-RS8 V2 | User Guide - Page 148
    5.13 Exit menu The Exit menu items allow you to save or discard your changes to the BIOS items. Pressing does not immediately exit this menu. Select one of the options from this menu or from the legend bar to exit. Save Changes & Exit Exit System setup after saving the changes. Discard
  • Asus TS700-E8-RS8 V2 | User Guide - Page 149
    from the selected device. Launch EFI Shell from filesystem device Attempts to launch EFI Shell application (shell.efi) from one of the available filesystem devices. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 5-57
  • Asus TS700-E8-RS8 V2 | User Guide - Page 150
    5-58 Chapter 5: BIOS Setup
  • Asus TS700-E8-RS8 V2 | User Guide - Page 151
    Chapter 6: RAID Configuration RAID Configuration This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. 6
  • Asus TS700-E8-RS8 V2 | User Guide - Page 152
    ROM Utility with RAID 0, RAID 1, RAID 10, and RAID 5 support (for Windows OS only). 6.1.1 RAID definitions RAID 0 (Data striping) disk drive included in a created RAID set, copy first the RAID driver from the support DVD to a floppy disk before you install an operating system to the selected hard
  • Asus TS700-E8-RS8 V2 | User Guide - Page 153
    SATA hard disks into the drive bays following the instructions in the system user guide. 2. Connect a SATA signal cable to the signal supported by the Intel® C612 chipset. Refer to the succeeding section for details on how to use the RAID configuration utility. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2
  • Asus TS700-E8-RS8 V2 | User Guide - Page 154
    (s) from SATA hard disk drives connected to the SATA connectors supported by the motherboard southbridge chip. To enter the LSI MegaRAID software utility, the boot priority of the SATA optical drive has to be manually adjusted. Otherwise, the system will not boot from the connected SATA ODD
  • Asus TS700-E8-RS8 V2 | User Guide - Page 155
    Easy Configuration, the virtual drive parameters are set automatically. In New Configuration, you manually set the virtual drive parameters. Using Easy Configuration To create a RAID set using the Navigate Between Items And Press Enter To Select An Option ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-5
  • Asus TS700-E8-RS8 V2 | User Guide - Page 156
    2. The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Use the up/down arrow keys to select the drives you want to include in the RAID set, and then press . When selected, the drive indicator changes from READY to ONLIN A[X]-[Y], where X is the array number,
  • Asus TS700-E8-RS8 V2 | User Guide - Page 157
    Accept SPAN = NO Status ONLINE Choose RAID Level For This VD Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-7
  • Asus TS700-E8-RS8 V2 | User Guide - Page 158
    8. Select Units from the Virtual Drive sub-menu, and then press . 9. Select the units for virtual drive size from the menu, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured ManagemeLnDt
  • Asus TS700-E8-RS8 V2 | User Guide - Page 159
    #Stripes StripSz Status 0 1 148.580GB 2 64KB ONLINE Select Yes Or No Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-9
  • Asus TS700-E8-RS8 V2 | User Guide - Page 160
    Using New Configuration When a RAID set already exists, using the New Configuration command erases the existing RAID configuration data. If you do not want to delete the existing RAID set, use the View/Add Configuration command to view or create another RAID configuration. To create a RAID set
  • Asus TS700-E8-RS8 V2 | User Guide - Page 161
    drive displays at the bottom of the screen. 3. Follow step 3 to 12 of section 6.2.1 Creating a RAID set: Using Easy Configuration to add a new RAID set. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-11
  • Asus TS700-E8-RS8 V2 | User Guide - Page 162
    6.2.3 Initializing the virtual drives After creating the RAID set(s), you must initialize the virtual drives. You may initialize the virtual drives of a RAID set(s) using the Initialize or Objects command on the Management Menu. Using the Initialize command To initialize the virtual drive using the
  • Asus TS700-E8-RS8 V2 | User Guide - Page 163
    StripSz 0 In1it of 1V4D8.I5s80IGnB Proces2s 64KB VD 0 Initialization Complete. Press Esc.. 100% Completed Status ONLINE Virtual Drives Virtual Drive 0 SPACE-(De)Select, F10-Initialize ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-13
  • Asus TS700-E8-RS8 V2 | User Guide - Page 164
    Using the Objects command To initialize the virtual drives using the Objects command 1. From the Management Menu, select Objects > Virtual Drive, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Objects Management MAednaupter
  • Asus TS700-E8-RS8 V2 | User Guide - Page 165
    And Press Enter To Select An Option 5. A progress bar appears on screen. If desired, press to abort initialization. When initialization is completed, press . ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-15
  • Asus TS700-E8-RS8 V2 | User Guide - Page 166
    6.2.4 Rebuilding failed drives You can manually rebuild failed hard disk drives using the Rebuild command in the Management Menu. To rebuild a failed hard disk drive 1. From the Management Menu, select Rebuild,
  • Asus TS700-E8-RS8 V2 | User Guide - Page 167
    77247MB HDS72808PLA380 PF20A60A SPACE-(De)Select,F10-Start Rebuild,F2-Drive Information,F3-View Virtual Drives 4. When rebuild is complete, press any key to continue. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-17
  • Asus TS700-E8-RS8 V2 | User Guide - Page 168
    6.2.5 Checking the drives for data consistency You can check and verify the accuracy of data redundancy in the selected virtual drive. The utility can automatically detect and/or detect and correct any differences in data redundancy depending on the selected option in the Objects > Adapter menu. The
  • Asus TS700-E8-RS8 V2 | User Guide - Page 169
    consistency check. • Abort - Aborts the consistency check. When you restart checking, it continues from zero percent. 5. When checking is complete, press any key to continue. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-19
  • Asus TS700-E8-RS8 V2 | User Guide - Page 170
    Using the Objects command To check data consistency using the Objects command 1. From the Management Menu, select Objects, and then select Virtual Drive from the sub-menu. 2. Use the arrow keys to select the virtual drive you want to check, and then press . 3. Select Check Consistency from
  • Asus TS700-E8-RS8 V2 | User Guide - Page 171
    Cursor Keys To Navigate Between Items And Press Enter To Select An Option The utility clears all the current array(s). 3. Press any key to continue. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-21
  • Asus TS700-E8-RS8 V2 | User Guide - Page 172
    6.2.7 Selecting the boot drive from a RAID set You must have created a new RAID configuration before you can select the boot drive from a RAID set. See section 6.2.1 Creating a RAID set: Using New Configuration for details. To select the boot drive from a RAID set 1. From the Management Menu, select
  • Asus TS700-E8-RS8 V2 | User Guide - Page 173
    6.2.8 Enabling WriteCache You may manually enable the RAID controller's WriteCache option after creating a RAID set to improve the data transmission performance. When Items And Press Enter To Select An Option 5. When finished, press any key to continue. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-23
  • Asus TS700-E8-RS8 V2 | User Guide - Page 174
    to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. Before you proceed, ensure that you have installed the Serial ATA hard disk drives, have set the correct jumper settings of the
  • Asus TS700-E8-RS8 V2 | User Guide - Page 175
    the selection bar then press to select a disk. A small triangle before the Port number marks the selected drive. Press when you are done. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-25
  • Asus TS700-E8-RS8 V2 | User Guide - Page 176
    range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. 7. In the Capacity field item, key in the RAID
  • Asus TS700-E8-RS8 V2 | User Guide - Page 177
    VERIFICATION ] ALL DATA IN THE VOLUME WILL BE LOST! (This does not apply to Recovery volumes) Are you sure you want to delete volume "Volume0"? (Y/N): ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-27
  • Asus TS700-E8-RS8 V2 | User Guide - Page 178
    6.3.3 Resetting disks to Non-RAID Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive. To reset a RAID set: 1. From the utility main menu, select 3. Reset Disks to Non-RAID and press <
  • Asus TS700-E8-RS8 V2 | User Guide - Page 179
    Model Serial # Size X XXXXXXXXXXX XXXXXXXX XXX.GB [ ]-Previous/Next [ENTER]-Select [ESC]-Exit Select a destination disk with the same size as the original hard disk. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-29
  • Asus TS700-E8-RS8 V2 | User Guide - Page 180
    3. The utility immediately starts rebuilding after the disk is selected. When done, the status of the degraded RAID volume is changed to "Rebuild". Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023 Copyright(C) 2003-12 Intel Corporation. All Rights Reserved. [ MAIN MENU ]
  • Asus TS700-E8-RS8 V2 | User Guide - Page 181
    Chapter 4 for more details. 4. From the Exit menu, select Save Changes & Exit, then press . 5. When the confirmation window appears, select Yes, then press . ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-31
  • Asus TS700-E8-RS8 V2 | User Guide - Page 182
    disk drives that are connected to the Serial ATA connectors supported by the Southbridge. You need to manually install the Intel® Rapid Storage Technology enterprise utility on a Windows® operating system. Please refer to the installation instructions in Chapter 6. To enter the Intel® Rapid Storage
  • Asus TS700-E8-RS8 V2 | User Guide - Page 183
    data on one of the selected disks, select NO when prompted. • If you want to Enable volume write-back cache or Initialize volume, click Advanced. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-33
  • Asus TS700-E8-RS8 V2 | User Guide - Page 184
    6. Confirm the volume creation, than click Create Volume to continue. This process could take a while depending on the number and size of the disks. You can continue using other applications during this time. 7. Wait until the process is completed, then click OK when prompted. You still need to
  • Asus TS700-E8-RS8 V2 | User Guide - Page 185
    range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-35
  • Asus TS700-E8-RS8 V2 | User Guide - Page 186
    6.4.3 Deleting a volume Be cautious when deleting a volume. You will lose all data on the hard disk drives. Before you proceed, ensure that you back up all your important data from your hard drives. To delete a volume: 1. From the utility main menu, select the volume (exp. Volume_0000) in Volumes
  • Asus TS700-E8-RS8 V2 | User Guide - Page 187
    , or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings • Storage system errors ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 6-37
  • Asus TS700-E8-RS8 V2 | User Guide - Page 188
    6-38 Chapter 6: RAID Configuration
  • Asus TS700-E8-RS8 V2 | User Guide - Page 189
    Chapter 7: Driver Installation Driver Installation This chapter provides the instructions for installing the necessary drivers for different system components in both Linux® and Windows® Operating Systems. 7
  • Asus TS700-E8-RS8 V2 | User Guide - Page 190
    server system, you are now ready to install an operating system to the independent hard disk drive or bootable array. This part provides the instructions disk drive has to be manually adjusted. Otherwise, the system Start Windows®. 2. Place the motherboard support DVD into the optical drive. 3. Go
  • Asus TS700-E8-RS8 V2 | User Guide - Page 191
    R2 OS 1. Boot the computer using the Windows® Server 2008 R2 OS installation disc. Follow the screen instructions to start installing Windows Server 2008 R2. 2. When prompted to choose a type of installation, click Custom (advanced). 3. Click Load Driver. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 7-3
  • Asus TS700-E8-RS8 V2 | User Guide - Page 192
    and replace with the motherboard Support DVD into the optical drive. Click Browse to the driver in the corresponding folder of the Support DVD then click OK to continue. 6. the RAID driver, replace the motherboard Support DVD with the Windows Server installation disc. Select the drive to
  • Asus TS700-E8-RS8 V2 | User Guide - Page 193
    Insert your driver disk into /dev/fd0 and press "OK" to continue. OK Back The drivers for the RAID card are installed to the system. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 7-5
  • Asus TS700-E8-RS8 V2 | User Guide - Page 194
    drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 6. Follow the onscreen instructions to finish the OS installation. 7. When the installation is completed, DO NOT click Reboot. Press + + to switch to the command
  • Asus TS700-E8-RS8 V2 | User Guide - Page 195
    , press to give the third party driver. Enter the following command at the boot: Linux dd blacklist=isci blacklist=ahci nodmraid, then press . ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 7-7
  • Asus TS700-E8-RS8 V2 | User Guide - Page 196
    4. Select Yes using the key when asked if you have the driver disk, then press . Main Menu Do you have a driver disk? Yes No 5 . You have multiple devices which could serve as source for a driver disk. Choose one you like to use and select OK, then press . Driver Disk Sou8rce
  • Asus TS700-E8-RS8 V2 | User Guide - Page 197
    RAID controller drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 8. Follow the onscreen instructions to finish the OS installation. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 7-9
  • Asus TS700-E8-RS8 V2 | User Guide - Page 198
    Preparing the Linux Driver Ensure that there is another computer with a Linux-based OS to create the RAID driver. When creating the RAID driver, you may refer to the examples below which uses a 64bit SUSE Linux system to create a 64bit RAID driver for SUSE11 sp1. 1. Copy the image file into the
  • Asus TS700-E8-RS8 V2 | User Guide - Page 199
    controller driver when installing SUSE Linux Enterprise Server OS: 1. Boot the system from the SUSE OS installation CD. 2. Use the arrow keys to select Installation from the Boot Options menu. 3. Press , then select Yes from the menu. Press . ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 7-11
  • Asus TS700-E8-RS8 V2 | User Guide - Page 200
    medium. Select OK, then press . Please choose the Driver Update medium. sda: USB Floppy other device OK Back 6. Select Back and follow the onscreen instructions to finish the installation. 7-12 Chapter 7: Driver Installation
  • Asus TS700-E8-RS8 V2 | User Guide - Page 201
    , Manual, and Contact. These menus are further explained on the succeeding section. 7.3.1 Drivers menu The Drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 7-13
  • Asus TS700-E8-RS8 V2 | User Guide - Page 202
    7.3.2 Utilities menu The Utilities menu displays the software applications and utilities that the motherboard supports. 7.3.3 Make Disk menu The MakeDisk menu contains items to create the Intel RAID driver disks. Press the arrow down button in the lower left part
  • Asus TS700-E8-RS8 V2 | User Guide - Page 203
    guides or manuals for your motherboard. Content may vary depending on motherboard model. 7.3.5 Contact information menu The Contact menu displays ASUS contact information, e-mail addresses, and useful links if you seek for more information or in need of technical support. ASUS TS700-E8-PS4 V2
  • Asus TS700-E8-RS8 V2 | User Guide - Page 204
    7.4 Installing the drivers and utilities This section provides instructions and guidelines on how to install the required drivers, management applications, and optional utilities from the support DVD. 7.4.1 Using the ASUS InstAll application This sections describes how to install the drivers and
  • Asus TS700-E8-RS8 V2 | User Guide - Page 205
    recommended tools automatically from InstAll (recommended) then click OK to open the main ASUS InstAll screen Tick Customize the installation of drivers or Install drivers only if you from the information shown below. display area progress bar ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 7-17
  • Asus TS700-E8-RS8 V2 | User Guide - Page 206
    . To install a driver or utility: 1. Restart the computer, and then log on with Administrator privileges. 2. Insert the motherboard/system support DVD into the optical drive. The support DVD automatically displays the Drivers menu if Autorun is enabled in your computer. If Autorun is NOT enabled in
  • Asus TS700-E8-RS8 V2 | User Guide - Page 207
    / device 1. Intel chipset 2. VGA card 3. USB Controllers 4. Audio Installer on the support DVD • Intel Chipset Device Software • Intel I350-AM4 / I350-AM2 / I210 / 4. Follow onscreen instructions to complete the installation. 5. Restart the system. ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 7-19
  • Asus TS700-E8-RS8 V2 | User Guide - Page 208
    this utility. Refer to section Rear I/O connection of your user guide for more details. • The USB Charger+ does not support USB hubs and USB extension cables, and generic USB cables. • The USB Charger+ may not recognize some ASUS devices due to a special design. Launching USB Charger+ To launch
  • Asus TS700-E8-RS8 V2 | User Guide - Page 209
    Appendix Appendix This appendix includes additional information that you may refer to when configuring the motherboard.
  • Asus TS700-E8-RS8 V2 | User Guide - Page 210
    Z10PE-D16 WS block diagram A-2 Appendix
  • Asus TS700-E8-RS8 V2 | User Guide - Page 211
    Industrial Zone, Minhang District, Shanghai, China. Telephone +86-21-5442-1616 Fax +86-21-5442-0099 Web site http://www.asus.com.cn Technical Support Telephone Online Support 400-620-6655 http://support.asus.com/techserv/techserv.aspx ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 A-3
  • Asus TS700-E8-RS8 V2 | User Guide - Page 212
    +49-2102-959911 Web site http://www.asus.de Online contact http://www.asus.de/sales Technical Support Telephone Support Fax Online support +49-1805-010923 +49-2102-959911 http://support.asus.com/techserv/techserv.aspx ASUS Czech Service s.r.o. (Europe) Address Na Rovince 887, 720 00
  • Asus TS700-E8-RS8 V2 | User Guide - Page 213
    /techserv.aspx ASK-Service (Russia and CIS) Address 10 Telephone (495) 640-32-75 Web site http://ru.asus.com Technical Support Telephone Online Support 008-800-100-ASUS (008-800-100-2787) http://vip.asus.com/eservice/techserv.aspx?SLanguage=ru ASUS TS700-E8-PS4 V2, TS700-E8-RS8 V2 A-5
  • Asus TS700-E8-RS8 V2 | User Guide - Page 214
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
Server User Guide
TS700-E8-PS4 V2
TS700-E8-RS8 V2