Asus TX97-XE TX97-XE User Manual

Asus TX97-XE Manual

Get Asus TX97-XE PDF manuals and user guides View all Asus TX97-XE manuals
Add to My Manuals
Save this manual to your list of manuals

Asus TX97-XE manual content summary:

  • Asus TX97-XE | TX97-XE User Manual - Page 1
    R TX97-XE Pentium® ATX Motherboard USER'S MANUAL
  • Asus TX97-XE | TX97-XE User Manual - Page 2
    OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARES DESCRIBED IN IT. Copyright © 1998 ASUSTeK COMPUTER INC. All Rights Reserved. Product Name: ASUS TX97-XE Manual Revision: 3.03 Release Date: July 1998 2 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 3
    Str. 25, 40880 Ratingen, BRD, Germany Telephone: 49-2102-445011 Fax: 49-2102-442066 Email: [email protected] Technical Support Hotline: 49-2102-499712 BBS: 49-2102-448690 Email: [email protected] WWW: www.asuscom.de FTP: ftp.asuscom.de/pub/ASUSCOM ASUS TX97-XE User's Manual 3
  • Asus TX97-XE | TX97-XE User Manual - Page 4
    this Manual is Organized 7 Item Checklist 7 II. FEATURES 8 Features of the ASUS TX97-XE Motherboard 8 ASUS TX97 Smart Series Motherboards 9 Parts of the ASUS TX97-XE Motherboard 11 III. INSTALLATION 12 ASUS TX97-XE Motherboard Layout 12 Installation Steps 14 1. Jumpers 14 Jumper Settings
  • Asus TX97-XE | TX97-XE User Manual - Page 5
    Drivers 63 Configuration Manager 63 Creative PnP Configuration Manager (CTCM 63 Audio Software 65 Environment Variables 69 SOUND Environment variable 69 BLASTER Environment Variable 69 MIDI Environment Variable 70 Maximum Recording Rates for the Audio Hardware 70 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 6
    and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. 6 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 7
    master and slave drives (1) Floppy ribbon cable for (1) 5.25inch floppy and (2) 3.5inch floppies (1) Bag of spare jumpers (1) Support drivers and utilities (1) User's Manual Infrared module (optional) ASUS audio onboard and audio driver CD with online help (optional) ASUS TX97-XE User's Manual 7
  • Asus TX97-XE | TX97-XE User Manual - Page 8
    FEATURES Features of the ASUS TX97-XE Motherboard The ASUS TX97-XE is carefully designed for the demanding PC user who wants many features in a small package. This motherboard: • Intel Chipset: Features Intel's 430TX PCIset with I/O subsystems. • Versatile Processor Support: Intel Pentium® 75-233MHz
  • Asus TX97-XE | TX97-XE User Manual - Page 9
    prevent system overheat and system damage, there is a heat sensor under the CPU and on the motherboard itself to monitor CPU and system temperature to make sure the system is operating at a safe heat level to avoid any failures triggered by extremely high temperature. ASUS TX97-XE User's Manual 9
  • Asus TX97-XE | TX97-XE User Manual - Page 10
    anywhere in the world! • Message LED (requires ACPI OS support): Chassis LEDs now act as information providers. Through the way a particular LED illuminates, the user can determine the stage the computer is in. A simple glimpse provides useful information to the user. 10 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 11
    Parts II. FEATURES Parts of the ASUS TX97-XE Motherboard T: PS/2 Mouse B: PS/2 Keyboard T: USB Port 1 B: USB Port 2 COM 1 T: Parallel Conn. B: Serial Conn. COM 2 Intel's Labs Audio (optional) 4 ISA Slots LM78 Hardware Programmable Monitor (optional) Flash ROM ASUS TX97-XE User's Manual 11
  • Asus TX97-XE | TX97-XE User Manual - Page 12
    Cell BIOS Power FANPWR1 Hardware Monitor LM78 BBLKW Chasis open alarm lead Block Program Flash ROM for BIOS Infrared Con. (IrDA) ISA Slot 4 Panel Connections IDE LED NOTE: The items in outline are optional and may not be present. RTC (Test/Clear) RTCLR 12 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 13
    INSTALLATION Jumpers 1) RTCLR 2) AUDIO (optional) 3) M/IO 4) FS0, FS1, FS2 5) BF0, BF1, BF2 6) VID0, 1, 2, 3 p. 15 Real Time Clock RAM IR p. 30 Infrared Port Module Connector 14) ATXPWR p. 30 ATX Motherboard Power Connector (20-pin Block) 15) VOLCTL (optional) p. ASUS TX97-XE User's Manual 13
  • Asus TX97-XE | TX97-XE User Manual - Page 14
    BIOS Software 1. Jumpers Several hardware settings are made through the use of jumper caps to connect jumper pins (JP) on the motherboard. See motherboard layout for locations of jumpers. The jumper settings whenever the components are separated from the system. 14 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 15
    jumper and attaching a current meter to pins 1&2. WARNING: You must unplug the power cord to your power supply to ensure that there is no power to your motherboard. The CMOS RAM containing BIOS 2 3 Disable AUDIO 1 2 3 Enable (Default) Onboard Audio (Disable / Enable) ASUS TX97-XE User's Manual 15
  • Asus TX97-XE | TX97-XE User Manual - Page 16
    of BIOS SOFTWARE or disable all Multi-I/O items at once with the following jumper in Ratio (BF0, BF1, BF2) These jumpers set the frequency ratio between the Internal frequency Ratio 3.0x(3/1) 3.0x(3/1) ---------- ------------4.0x(4/1) ------------4.5x(9/2) 16 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 17
    III. INSTALLATION Set the jumpers by the Internal speed of the Intel, AMD, IBM, Cyrix Rev 2.7 or later is supported on this motherboard (see next page). Bootup screen will show 6x86-P166+ with the Cyrix PR166+ installed on this motherboard. III. INSTALLATION Jumpers ASUS TX97-XE User's Manual 17
  • Asus TX97-XE | TX97-XE User Manual - Page 18
    2 3 1.8 Volts 1 2 3 2.7 Volts 1 2 3 3.2 Volts 1 2 3 1.9 Volts 1 2 3 2.8 Volts 1 2 3 3.4 V * 1 2 3 2.1 Volts 1 2 3 2.9 Volts 1 2 3 3.5 V * * Setting these two jumpers' VID1 to [2-3] or [----] (removed) will result in the same voltages respectively. 1 2 3 2.5 Volts 18 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 19
    are not supported). SIMMs must be installed in pairs so that each Row (see Map of Motherboard for motherboard. IMPORTANT: Memory speed setup is required through "Auto Configuration" in BIOS Chipset Setup of the BIOS SOFTWARE. If both 60ns and 70ns memory are used, set ASUS TX97-XE User's Manual 19
  • Asus TX97-XE | TX97-XE User Manual - Page 20
    Side Only) Mounting Hole 4. The plastic guides should go through the two mounting holes on the sides and the support clips should snap on the other side. 5. To release the memory module, push both support clips outward and rock the module out of the support clips. 20 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 21
    between left, center, or right to identify the type and also to prevent the wrong type to be inserted into the DIMM slot on the motherboard. You must ask your retailer for the specifications before purchasing. Four clock signals are supported on this motherboard. ASUS TX97-XE User's Manual 21
  • Asus TX97-XE | TX97-XE User Manual - Page 22
    CPU as your guide. The white printed on the motherboard next to that set jumpers for "CPU to BUS Frequency Ratio" and jumpers for "BUS Frequency Selection" depending on the CPU that you install. Lever Lock Blank 1 Notch 1 ZIF Socket 7 with Pentium MMX Processor 22 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 23
    the "Resources" tab, which shows the Interrupt number and address. Make sure that no two devices use the same IRQs or your computer will experience problems when those two devices are in use at the same time. ASUS TX97-XE User's Manual 23
  • Asus TX97-XE | TX97-XE User Manual - Page 24
    BIOS automatically assigns an IRQ to a PCI slot that has a card in it that requires an IRQ. To install a PCI card, you need to set something called the INT (interrupt) assignment. Since all the PCI slots on this motherboard use an INTA #, be sure that the jumpers Cards 24 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 25
    These are clearly separated from jumpers in "Map of the Motherboard." Placing jumper caps over these will cause damage to your motherboard. IMPORTANT: Ribbon cables should See "PS/2 Mouse Control" in BIOS Features Setup of the BIOS SOFTWARE. PS/2 Mouse (6-pin Female) ASUS TX97-XE User's Manual 25
  • Asus TX97-XE | TX97-XE User Manual - Page 26
    Setup of the BIOS SOFTWARE. R III. INSTALLATION Connectors COM 1 COM 2 Serial Ports (9-pin Male) 5. Floppy Disk Drive Connector (34-1pin FLOPPY) This connector supports the provided floppy drive to Pin 1 Floppy Drive Connector Pin 1 Floppy Disk Drive Connector 26 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 27
    (15-pin Female) 8. Universal Serial BUS Ports 1 & 2 (Two 4-pin Female Sockets) Two USB ports are available for connecting USB devices. USB 1 Universal Serial Bus (USB) 2 ASUS TX97-XE User's Manual 27
  • Asus TX97-XE | TX97-XE User Manual - Page 28
    second drive to Slave mode by setting its jumper accordingly. Please refer to the documentation of your hard disk for the jumper settings. BIOS now supports SCSI device or IDE CD-ROM bootup (see "HDD Sequence SCSI reversing the 2-pin plug. IDE_LED + IDE Activity LED 28 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 29
    & Power Supply Fan Connectors (3-pin FANPWR) These connectors support cooling fans of 500mAMP (6WATT) or less. Orientate occur to the motherboard and/or the CPU fan if these pins are incorrectly used. These are not jumpers, do not place jumper caps over Chassis Signal ASUS TX97-XE User's Manual 29
  • Asus TX97-XE | TX97-XE User Manual - Page 30
    opening on system cases that support this feature. You must also configure the setting through "UART2 Use Infrared" in available, you must connect an optional Infrared (IrDA) module to the motherboard. 14. ATX Power Supply Connector (20-pin ATXPWR) This connector 3V 30 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 31
    INSTALLATION 15. Onboard Digital Audio Control (VOLCTL) (with optional onboard Audio) This jumper allows you to adjust the audio volume digitally using case mounted momentary buttons. Audio on the system. R Wake On LAN Connector III. INSTALLATION Connectors ASUS TX97-XE User's Manual 31
  • Asus TX97-XE | TX97-XE User Manual - Page 32
    the inbox). Requires ACPI OS support. 18. System Management Interrupt Lead (SMI) This allows the user to manually place the system into a problems. May require one or two pushes depending on the position of the switch. Wake-up can be controlled by settings in the BIOS but ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 33
    . Recheck your jumper settings and connections or call your retailer for assistance. 7. During power-on, hold down to enter BIOS setup. Follow the instructions in the next section, BIOS SOFTWARE. * not appear when shutting down with ATX power supplies. ASUS TX97-XE User's Manual 33
  • Asus TX97-XE | TX97-XE User Manual - Page 34
    you save AFLASH.EXE and the BIOS file to a bootable floppy disk. To save your current BIOS, type [1] at the Main Menu and then press . The Save Current BIOS To File screen appears. Type a filename and the path, for example, A:\XXXXX1 and then press . 34 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 35
    the BIOS update, press Y to start the update. The utility starts to program the new BIOS information into the flash ROM. When the programming is finished, Flashed Successfully will be displayed. Follow the onscreen instructions to continue. IV. BIOS Flash Memory Writer ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 36
    , update the original BIOS file you saved to disk above. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service. IV. BIOS Updating BIOS 36 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 37
    later, and take note of the configuration settings for future reference; in particular, the hard disk specifications. If you are installing the motherboard, reconfiguring your system or you receive a will appear with the following options: IV. BIOS BIOS Setup ASUS TX97-XE User's Manual 37
  • Asus TX97-XE | TX97-XE User Manual - Page 38
    : Date To set the date, highlight the "Date" field and then press either / or / to set the current date. Follow the month, day and year format. Valid values for month, day and year are: Month: (1 to 12), Day: (1 to 31), Year: (up to 2079) 38 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 39
    Block Addressing (LBA) to allow larger IDE hard disks; set it to Large for drives over 528MB that do not support LBA. Large type of drive can only be used with MS-DOS and is very uncommon. Most IDE drives over 528MB support the LBA mode. IV. BIOS Standard CMOS ASUS TX97-XE User's Manual 39
  • Asus TX97-XE | TX97-XE User Manual - Page 40
    type. If you use older hard disks that do not support this feature, then you must configure the hard disk in from either: Drive A, Drive B, Both, and Disabled Video (EGA/VGA) Set this field to the type of video display card installed in your system. BIOS Standard CMOS 40 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 41
    set up some system features according to your preference. Some entries are required by the motherboard's design to remain in their default settings. IV. BIOS time. Setup default setting for this field is Enabled. A complete test of the system is done on each test. ASUS TX97-XE User's Manual 41
  • Asus TX97-XE | TX97-XE User Manual - Page 42
    on the setup default setting of Disabled. OS/2 Onboard Memory > 64M (Disabled) When using OS/2 operating systems with installed DRAM of greater than 64MB, you need to Enable this option otherwise leave this on the setup default of Disabled... IV. BIOS BIOS Features 42 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 43
    default setting is 6; other settings are 8, 10, 12, 15, 20, 24, and 30. Typematic Delay (Msec) (250) This field sets the time interval for displaying the first and second characters. Four delay rate options are available: 250, 500, 750, and 1000. IV. BIOS BIOS Features ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 44
    the BIOS Features Setup screen. IV. BIOS Chipset Features under certain situations have a problem utilizing this feature so it setting of Disabled for some ISA cards that are not PCI 2.1 compliant. 16-bit I/O Recovery Time (1 BUSCLK) Timing for 16-bit ISA cards. 44 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 45
    use a different controller card to connect the floppy drives, set this field to Disabled. Onboard FDC Swap A & B that there is no conflict in the address assignments. The PC can support up to three parallel ports as long as there are no conflicts BIOS Chipset Features ASUS TX97-XE User's Manual 45
  • Asus TX97-XE | TX97-XE User Manual - Page 46
    have a different Mode timing (0, 1, 2, 3, 4), it is necessary for these to be independent. PIO and DMA timings can be independently set. The default setting of Auto will allow autodetection to ensure optimal performance. Chipset Features IV. BIOS Chipset Features 46 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 47
    after a period of inactivity. Power Management Chipset Features IV. BIOS IV. BIOS NOTE: SETUP Defaults are noted in parenthesis next to each function power management. The settings are Susp,Stby -> Off (default); All Modes -> Off; Always On; and Suspend -> Off. ASUS TX97-XE User's Manual 47
  • Asus TX97-XE | TX97-XE User Manual - Page 48
    BIOS to control the video display card if it supports the DPMS feature. Blank Screen only blanks the screen (or monitors without power management or "green" features). If set setting, holding the ATX switch for more than 4 seconds will power off the system. IV. BIOS 48 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 49
    hardware monitor can detect the CPU and MB (motherboard) Temperatures. These values refresh upon key entries. Set to Ignore only if necessary. Voltage Monitor (xx the screen will instruct you to "Press F1 to continue, DEL to enter SETUP" IV. BIOS Power Management ASUS TX97-XE User's Manual 49
  • Asus TX97-XE | TX97-XE User Manual - Page 50
    system to configure the PCI bus slots instead of using the BIOS. Thus interrupts may be reassigned by the OS when Yes is selected set the field for that IRQ to Yes. For example: If you install a legacy ISA card that requires IRQ 10, then set IRQ10 Used By ISA to Yes... 50 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 51
    accomplish this task, leave ISA MEM Block BASE to its default setting of No/ICU. SYMBIOS SCSI BIOS (Auto) The default uses Auto settings for the onboard SCSI BIOS. If you do not want to use the onboard SCSI BIOS, choose Disabled. Power Management IV. BIOS PnP / PCI ASUS TX97-XE User's Manual 51
  • Asus TX97-XE | TX97-XE User Manual - Page 52
    troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high performance features. To load these default settings, highlight "Load BIOS fields on the Standard CMOS Setup screen. IV. BIOS Load Defaults 52 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 53
    asking you to type it again. After setting a password, the screen automatically reverts to the main screen. IV. BIOS Passwords To implement password protection, specify in If you forget the password, see CMOS RAM in section III for procedures on clearing the CMOS. ASUS TX97-XE User's Manual 53
  • Asus TX97-XE | TX97-XE User Manual - Page 54
    CMOS Setup screen. IV. BIOS Hard Drive Detect Up to auto-detecting a hard disk that supports the LBA mode, three lines set of parameters for a particular IDE hard drive. Some IDE drives can use more than one set. This is not a problem if the drive is new and empty. 54 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 55
    . BIOS Save & Exit Exit Without Saving Select this option to exit the Setup utility without saving the modifications you specify during the current session. To exit without saving, highlight the "Exit Without Saving" option on the main screen and then press . ASUS TX97-XE User's Manual 55
  • Asus TX97-XE | TX97-XE User Manual - Page 56
    SOFTWARE Desktop Management Interface (DMI) Introducing the ASUS DMI Configuration Utility This motherboard supports DMI within the BIOS level and provides a DMI Configuration Utility to bypass your AUTOEXEC.BAT and CONFIG.SYS files. V. SOFTWARE DMI Introduction 56 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 57
    to change the settings. Enter to BIOS Auto Detect **, *appears on the right for each menu item on the left side that has been auto detected by the system BIOS. A heading, *** User Modified ***, will appear on the right for menu items that have been modified by the user. ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 58
    V. SUPPORT SOFTWARE Save MIFD BIOS Defaults V. SOFTWARE Using DMI Utility You can load the BIOS defaults from a MIFD file and can clear all user modified and added data. You must reboot your computer in order for the defaults to be saved back into the Flash BIOS. 58 ASUS TX97-XE User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 59
    R 16-bit Audio USER'S MANUAL Drivers Installation
  • Asus TX97-XE | TX97-XE User Manual - Page 60
    by the digit before and after the period of the manual revision number. Manual updates are represented by the third digit in the manual revision number. For previous or updated manuals, BIOS, drivers, or product release information, contact ASUS at http://www.asus.com.tw or through any of the means
  • Asus TX97-XE | TX97-XE User Manual - Page 61
    Audio Drivers Manual & CD Info Audio Drivers Installation ASUS Audio CD This CD contains a collection of audio drivers and audio software applications for products with the Creative Labs ViBRA 16C Series Audio Chipset. NOTES: • Some of the drivers were originally created for floppy diskettes.
  • Asus TX97-XE | TX97-XE User Manual - Page 62
    Win95 Audio Drivers Audio Drivers Installation Procedures: 1. Insert the installation CD into the CD-ROM drive. 2. Double click on "My Computer" icon. 3. Double click on your CD-ROM drive. 4. Double click menu as shown below: Win95 Audio Drivers Drivers Installation 62 ASUS Audio User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 63
    the audio drivers first, the audio install program will not be able to find the PLUGPLAY\DRIVERS\DOS\ESCD. used for installing Configuration Manager programs. Proceed using the settings shown Configuration Manager Path : C:\CTCM Microsoft Windows 3.1 CD again. ASUS Audio User's Manual 63
  • Asus TX97-XE | TX97-XE User Manual - Page 64
    Manager Win3.x Audio Drivers You will get to exit. The following lines will be added to your system files: C:\AUTOEXEC.BAT file: SET CTCM=C:\CTCM C:\CTCM\CTCU /S /W=C:\WINDOWS C:\CONFIG.SYS file: DEVICE=C:\CTCM\CTCM.EXE Press to reboot your system. 64 ASUS Audio User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 65
    from the \AUDIO\WIN31\ directory for the following installation screens: Win3.x Audio Drivers Audio Installation Follow the instructions and make your choice to learn more about INSTALL , view the README to continue so that changes can be made to you system files. ASUS Audio User's Manual 65
  • Asus TX97-XE | TX97-XE User Manual - Page 66
    must also add the following two lines through "Custom Installation." DEVICE=C:\VIBRA16\DRV\VIBRA16.SYS /UNIT=0 /BLASTER=A:220 I:5 D:1 H:5 DEVICE=C:\VIBRA16\DRV\CTMMSYS.SYS Win3.x Audio Drivers Audio Installation 66 ASUS Audio User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 67
    here: Win3.x Audio Drivers Audio Installation The following files will then be saved with a .B~K extension in case you need to reference your original system file settings: C:\CONFIG.SYS C:\AUTOEXEC.BAT C:\WINDOWS\WIN.INI C:\WINDOWS\SYSTEM.INI C:\WINDOWS\CONTROL.INI ASUS Audio User's Manual 67
  • Asus TX97-XE | TX97-XE User Manual - Page 68
    then reboot on your own. Otherwise, press to automatically reboot your system. Win3.x Audio Drivers Audio Installation After your system is rebooted, enter Windows to see that the Audio Software is correctly to Section II or Section III for Audio Software usage. 68 ASUS Audio User's Manual
  • Asus TX97-XE | TX97-XE User Manual - Page 69
    variable specifies the directory location of audio drivers and software. You can type "SET" at the DOS prompt and see the following line for the setting of the SOUND environment variable: SOUND=< DMA channel Specifies the MPU-401 base I/O port Specifies the card type ASUS Audio User's Manual 69
  • Asus TX97-XE | TX97-XE User Manual - Page 70
    Win3.x Audio Drivers MIDI Environment Variable and Basic MIDI. You can type "SET" at the DOS prompt and see the following line for the setting of the BLASTER environment variable: MIDI hardware Getting Started Manual for more information on setting up the sound card to use a high DMA channel. 70
  • Asus TX97-XE | TX97-XE User Manual - Page 71
    (This page was intentionally left blank) ASUS Audio User's Manual 71
  • Asus TX97-XE | TX97-XE User Manual - Page 72
    (This page was intentionally left blank) 72 ASUS Audio User's Manual
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
R
TX97-XE
Pentium
®
ATX Motherboard
USER'S MANUAL