Asus VN247N VN247 Series User Guide for English Edition - Page 17

• In the User Mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0 ~ 100. 3. Image You can adjust the image Sharpness, Trace Free(only for VN247H ), Aspect Control, ASCR, Position (VGA only), and Focus (VGA only) from this main function. VN247 Splendid Sharpness 40 Color Trace Free 60 Image Aspect Control Full Input Select ASCR OFF System Setup Position Focus Move Menu Exit • Sharpness: Adjusts the picture sharpness. The adjusting range is from 0 to 100. • Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100. (only for VN247H) • Aspect Control: Adjusts the aspect ratio to "Full", "4:3","Overscan". (Overscan is available only for VN247H HDMI source) • ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function. • Position: Adjusts the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100 (Only available for VGA input). • Focus: Reduces Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100 (Only available for VGA input). • Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances. • Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional. ASUS LCD Monitor VN247 Series 3-3