Asus ZenPad 7.0 Z370KL ASUS ZenPad 8.0 Z380CX Firmware update SOPEnglish
Asus ZenPad 7.0 Z370KL Manual
View all Asus ZenPad 7.0 Z370KL manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus ZenPad 7.0 Z370KL manual content summary:
- Asus ZenPad 7.0 Z370KL | ASUS ZenPad 8.0 Z380CX Firmware update SOPEnglish - Page 1
Device Firmware Update SOP 1. Check Image Version: Please follow the path below to check the image version before and after image update: Enter [Settings][About phone]Find the [Build number] to check the image version. 2. Requirement > A windows PC > A USB cable > The battery life of device has to - Asus ZenPad 7.0 Z370KL | ASUS ZenPad 8.0 Z380CX Firmware update SOPEnglish - Page 2
Step 7: Then, a detecting notification (an exclamation mark) will show up on the top left corner of the screen. Step 8: Pull down the notification list and select "System Update File Detected". Select the image package which is going to update in the Select "System - Asus ZenPad 7.0 Z370KL | ASUS ZenPad 8.0 Z380CX Firmware update SOPEnglish - Page 3
Step 10: After the system update is confirmed in the "System Update Available" window, the device will automatically reboot and go into the recovery mode to update the image. Step 11: When the updating is completed, device will automatically reboot and show "Android is upgrading..." message (It will
Device Firmware Update SOP
1.
Check Image Version:
Please follow the path below to check the image version
before and after image update: Enter [Settings]
[About phone]
Find the [Build
number] to check the image version.
2.
Requirement
> A windows PC
> A USB cable
> The battery life of device has to be more than 15%
3.
Updating Image Through Detecting Notification
Step 1:
Download the zipped image file to your Windows PC.
Step 2
: Extract the zipped file.
Step 3
: After extracting, go into the extracted folder, you will get a zip file with prefix
“UL
-K***
” (ex: “UL
-K00G-WW-10.16.1.3.1-user
.zip”).
Step 4:
Connect the device with your PC.
Step 5:
Place the zip file with prefix “UL
-K***
” to the root directory of the
internal
sdcard storage.
Step 6:
Disconnect the device from your PC.