Audiovox CCDFR Installation Instructions
Audiovox CCDFR Manual
View all Audiovox CCDFR manuals
Add to My Manuals
Save this manual to your list of manuals |
Audiovox CCDFR manual content summary:
- Audiovox CCDFR | Installation Instructions - Page 1
Installation Instructions Model CCDF Color Camera External Mount CCDF FEATURES: l High Resolution, 1/3"CCD Color Camera l Compact Zinc Alloy Die Cast Body l Waterproof Housing l Waterproof Microphone l Adjustable Mounting Angle l Wide Angle Lens l Flush Mount or Surface Mount 128-6951 1 of 12 - Audiovox CCDFR | Installation Instructions - Page 2
Color Camera View: Cable Connector End View: 1 128-6951 2 of 12 - Audiovox CCDFR | Installation Instructions - Page 3
Specifications: 1. Signal System: NTSC 2. Voltage: DC12V 3. Current: 80mA 4. Image Sensor: 1/3" CCD Color Sensor NTSC: 510 X 492 picture elements 5. Horizontal Definition: 420 Lines 6. Viewing Angle: 120 degrees 7. Minimum Illumination: 0.8 LUX 8. Outer Dimensions: 1.18"(W) x 1.10"(H) x 1.65"(D) 9. - Audiovox CCDFR | Installation Instructions - Page 4
Contents: 3 128-6951 4 of 12 - Audiovox CCDFR | Installation Instructions - Page 5
Contents Description: 1. Camera: 1 2. Support Bracket: 1 3. Lock Nut: 1 4. Protective Cover: 1 5. Top Cover: 1 6. Flat Washer 1: 1 7. Flat Washer 2: 1 8. Slant Washer 1: 1 9. Slant Washer 2: 1 10. Tapping Screw: 2 11. Combine Screw: 2 12. Washer: 2 13. Docking Nut: 2 4 128-6951 5 of 12 - Audiovox CCDFR | Installation Instructions - Page 6
Flush Mount Note: 1. Camera 6. Flat Washer 1 3. Lock Nut 14. Mounting Plate 5 5. Top Cover 128-6951 6 of 12 - Audiovox CCDFR | Installation Instructions - Page 7
components. Use a 7/8" hole saw to drill the mount ing hole. 2. Screw the lock nut with the threaded side toward the camera body in the showed direction, then put the camera neck through the mounting hole with the lens exposed and wire cable facing down. 3. Place the flat washer 1 (# 6) and top - Audiovox CCDFR | Installation Instructions - Page 8
Angle Flush Mount Note: 1. Camera 5. Top Cover 3. Lock Nut 7. Flat Washer 2 8. Slant Washer 1 9. Slant Washer 2 7 Size of Mounting Holes (See the Attached Page) 128-6951 8 of 12 - Audiovox CCDFR | Installation Instructions - Page 9
. 6. Hold the top cover (# 5) by hand and tighten the lock nut (#3) towards the topcover (# 5) with the camera cable downwards. 7. Route the camera cable thru an existing grommet into the vehicle. 8. Connect the camera cable to the extension cable and route towards the monitor. 8 128-6951 9 of 12 - Audiovox CCDFR | Installation Instructions - Page 10
Surface Mount Note: 1. Camera 2. Support Bracket 4. Protective Cover 5. Top Cover 11. Combine Screw 12. Washer 3. Lock Nut 6. Flat Washer 1 13. Docking Nut 9 128-6951 10 of 12 - Audiovox CCDFR | Installation Instructions - Page 11
template to mark and drill two 5/32" holes on the mounting location. 2. Put the support bracket (# 2) onto the camera neck, then screw the lock nut along the camera neck to secure the bracket (# 2) to the camera body (# 1) in the showed direction. 3. Screw the combine screws (or tapping screws) into - Audiovox CCDFR | Installation Instructions - Page 12
© 2004 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-6951 128-6951 12 of 12
128-6951
1 of 12
Installation Instructions
Model
CCDF
Color Camera External Mount
CCDF
FEATURES:
l
High Resolution, 1/3”CCD Color Camera
l
Compact Zinc Alloy Die Cast Body
l
Waterproof Housing
l
Waterproof Microphone
l
Adjustable Mounting Angle
l
Wide Angle Lens
l
Flush Mount or Surface Mount