Audiovox CE149MP Operating Instructions

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THE UNIT TO RAIN OR MOISTURE.

TO AVOID ELECTRICAL SHOCK, DO NOT OPEN THE

CABINET.

REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

POWER SOURCES

Using With Batteries

Insert two size AA batteries (LR6 or MN1500 alkaline) according to the “

” and “

” marks correctly

aligned.

Notes on batteries

•

Insert batteries with correct polarity.

•

Do not use old batteries together with new ones or different types of batteries together.

•

If the electrolyte inside the battery should leak, wipe the contaminated parts in the battery

compartment with a cloth and replace the old batteries with new ones.

•

When the unit is not to be used for a long period of time, remove the batteries.

•

Do not mix old new batteries.

Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable (NICKEL-CADMIUM) batteries.

Notes on “

”

•

During playback (batteries are in use), “

” is off.

•

When the battery voltage level is low,

“

” and “Low Battery” will display for approx. 10 ~15 minutes,

playback still continues in this period.

•

Playback would automatically come to a stop when the batteries have no more power. Do not

repeat pressing “

” as the unit may operate incorrectly. Replace all the batteries with new ones.

•

“

” would not be on if an AC adaptor is used.

Using on house current

If the unit you purchased does not include an AC power adaptor, please use a 6V 450mA AC power

adaptor. Plus pole “

” to the centre pin of the 5.5mm socket.

When the unit is not to be used, be sure to disconnect the AC power adaptor.

Recharging Nickel-Cadmium / Nickel-Metal Hydride batteries (size “AA”)

Your mains adaptor also works as a charger. This is only possible with Nickel-Cadmium / Nickel-Metal Hydride

batteries (size “AA”) .

•

Insert two size “AA”

RECHARGEABLE BATTERIES

according to the

"

"

and "

"

indications in

the battery compartment.

•

Fully charge the

RECHARGEABLE BATTERIES

before using it for the first time and also if the batteries

have not been used for a long period.

•

Connect the AC power adaptor to CD player and then to the wall outlet.

•

The batteries will be fully charged approximately in 12 - 15 hours.

•

The ambient temperature for recharging should be between 5

o

C and 40

o

C.

•

The player can be operated while the batteries are being recharged.

•

Do not charge continuously for 24 hours or more. Doing so can cause the performance of the

rechargeable batteries to deteriorate.

•

More time may be required for charging in cold temperatures.

•

Replace the rechargeable batteries if the operating time decreases drastically even when they are

properly charged.

WARNING: DO NOT CHARGE NORMAL BATTERIES AS IT MAY CAUSE EXPLOSION. CHARGE ONLY

RECHARGEABLE NI-CAD AND NI-MH BATTERIES.

FUNCTION OF CONTROLS

DISC PLAYING

1.

Open the CD tray with the “OPEN” button.

2.

Insert the CD with the printed side facing upwards and push the disc gently until it clicks so that the disc

fits into the pivot.

3.

Press the CD door to close.

On display windows

When you press “

” , the display window shows:

During play

The track number of the current selection appears.

When "

" is pressed during play, total number of tracks on the disc will be displayed and the unit is still on.

The unit will be returned to full stop mode automatically after approximately 30 seconds if no button is pressed

again within the 30 seconds. Or press "

" for few minutes to stop the unit.

During pause

The elapsed time will flash.

When no disc is inserted into the player and when “

” is pressed, the display window shows "

".

The unit cannot be operated when the message is displayed. After approx. 30 seconds the unit will return to full

stop mode, or reset the player by pressing

and holding “

” and then insert a disc to start playing.

VARIOUS PLAYING MODES

During playback, every time the PLAY MODE key is pressed, the mode would be changed to the next one as

follows:

NORMAL play -> (

) Repeat One -> (

) Repeat All -> (

) Repeat Dir (for MP3

play mode only) ->(INTRO) Intro Scan -> Random -> Random All -> Random Dir (for MP3 play mode

only) -> Repeat Off

NORMAL play -

Playing the whole disc

The CD is played once from beginning to end.

REPEA

T PLA

YBACK (Repeat One / Repeat All/Repeat Dir)

•

To repeat the same track

Press

“ PLAY MODE ”

during play until “

Repeat

One

”

appears in the display window. Select desired track to be played only

once by pressing “

” or “

”

or by Multi-Jog Rotary.

•

To repeat

the whole disc

Press “

PLAY MODE

” during play until “

Repeat All

” ap-

pears in the display window.

•

To repeat

the directory of MP3 disc

Press “

PLAY MODE


Repeat Dir

” ap-

pears in the display window.

INTRO PLA

Y - Playing the First About T

en seconds of

a

ll the

s

elections:

1.

Press “

PLAY MODE

” button during play until “

Intro Scan

”

appear in

the display windows.

2.

It starts intro playing automatically (play each track for approx 10

second).

*

Automatically “

Intro

” play always starts from the track that

immediately follows the current running one.

*

By

or

button or Multi-Jog Rotary, you may start intro

play from the track selected.

RANDOM PLA

Y - Playing the selections in random order

1.

To random

Press “

PLAY MODE

” button during play until “

Random

” appears in

the

display window.

After all files are played , system will stop auto-

matically.

2.

To random all

Press “

PLAY MODE


Random All

” appear in the

display window. All tracks will play without sequence repeated.

*

To locate the next track: press

“

”

or use multi-rotary button by

clockwise. However, you cannot locate a previous track even if you

keep “

” pressed.

3.

To random dir (only for MP3 )

Press “

PLAY MODE


Random Dir

” display in the

display window. It can play all tracks of a directory on MP3 disc with-

out sequence repeated.

*

To locate the next track: press

“

” or use multi-rotary button by

clockwise. However, you cannot locate a previous track even if you

keep “

” pressed.

Portable MP3 CD Player

Operating Instructions

Before operating the unit, please read this manual thoroughly and retain it for future reference.

CAUTION

The use of optical instruments with this product will increase eye hazard.

INFORMATION (For the customers in USA)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, If not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

-

Connect the equipment into an outlet that is on a circuit different from the one the receiver is connected.

-

Consult the dealer or an experienced radio / TV technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual could void your

authority to operate this equipment.

For the Customers in the United Kingdom and / European countries

This Compact Disc player is classified as a

CLASS 1 LASER product.

The CLASS LASER PRODUCT label is located

on the bottom exterior.

For the Customers in Canada

This apparatus complies with the Class B limits

for radio noise emissions set out in radio

interference regulations.

This product contains a low power laser device.

PRECAUTIONS

On safety

As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the

casing. Refer servicing to qualified personnel only.

Do not put any foreign objects in the safety slot inside the disc compartment. If you do so, the laser beam may

come out when the lid is opened.

Do not put any foreign objects in the DC in 6V (external power input) jack. Should any solid objects or liquid

fall into the unit, disconnect the power supply and have the unit checked by qualified personnel before oper-

ating it any further.

On operation

Since the CD system offers a wide dynamic range, the peaks of the high level inputs are recorded with high

fidelity, and the noise level is very low.

Do not turn up the volume while listening to a part of the disc with

no audio signals or very low level inputs.

If you do so, the speakers may be damaged when the peak level

of the sound is played. The lens on the disc table should be kept clean. Do not touch the lens or poke at it. If

you do so, the lens may be damaged and the unit will not operate properly.

On installation

Never install the unit where it would be subjected to:

-

heat sources such as radiators or airducts.

-

direct sunlight.

-

excessive dust.

-

moisture or rain.

-

mechanical vibration or shock.

-

uneven surface.

•

Do not place any heavy object on top of the unit.

•

When the unit is used with an AC power adaptor, do not wrap the unit in a cloth, blanket, etc. If you do

so, the temperature inside and outside the unit may rise considerably, resulting in malfunctioning of the

unit or serious accidents.

•

If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture

may condense on the lens inside the unit. Should this occur, the unit will not operate. In this case,

remove the disc and leave the unit in a warm place for several hours until the moisture evapo-

rates.

•

For the unit to operate at its best, it should not be subjected to temperatures below 5

o

C (41

o

F) or above 35

o

C (95

o

F).

Notes on headphones / earphone

Do not use headphones / earphone while driving, cycling, or operating any motorized vehicle, it may create

a

traffic hazard and is illegal in some areas. It can also be potentially dangerous to play your headsets at high

volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue

use in potentially hazardous situations.

Avoid using headphones / earphone at high volume. Hearing experts advise against continuous, loud and

extended play. If you experience a ringing in your ears, reduce volume or discontinue use.

Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the

people around you.

If you have any questions or problems concerning your unit, please consult your nearest dealer.

POWER SOURCES

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTER.

LOCKS DEFEATED.

AVOID EXPOSURE TO BEAM.

Pause mode of the first track

SMART FIND BUTTON

It activates smart find mode for MP3 disc.

It changes smart find mode.

PLAY MODE BUTTON

It changes playing mode as follows (In case of non

seven key option).

For CD :

Repeat one -> Repeat all -> Intro scan

->

Random -> Random all -> Repeat off

For MP3: Repeat one -> Repeat all -> Repeat Dir

-> Intro Scan -> Random -> Random all

-> Random Dir -> Repeat off

PROGRAM BUTTON

It reserves songs to play in the program play mode.

SKIP/SEARCH BUTTON

It activates skip to next track (or directory) and ac-

tivates high-speed forward search.

It activates character input position to right direc-

tion.

SKIP/SEARCH BUTTON

It activates skip to previous track (or directory) and

activates high-speed reverse search.

It activates character input position to left direc-

tion.

PLAY/PAUSE BUTTON

It release stand by mode, playing starts from stop

mode.

It toggles playing and pause.

STOP BUTTON

It activates stop mode from playing mode, activates

standby mode.

It clears all program memory in the program

memory mode.

DIR/FILE and ANTI-SHOCK ON/OFF BUTTON

It changes from ESP/BYPASS mode to BYPASS/ESP

for CD disc (default ESP mode).

It changes skip condition by file level or directory level

for MP3 disc (default file skip mode).

It changes smart find mode.

ENTER BUTTON

It enters selected character for smart find mode.

It activates playing selected title or album.

MULTI-JOG ROTARY

Select character for smart find mode and select al-

bum or title for MP3 disc. And it is also used to search

track in high speed.

OPEN SWITCH

It activates open or close door.

LOCK / UNLOCK SWITCH

It activates lock or release all button from button lock.

DC IN 6V

Main socket.

BASS BOOST ON/OFF SWITCH

It activates dynamic bass boosting.

LINE OUT JACK

For connecting an external amplifier (stereo unit, ac-

tive loudspeakers etc.).

VOLUME CONTROL

Adjust the volume.

PHONES JACK

For connecting the headphones / earphone.

CHARGE SWITCH

(On the underside of the appliance.)

It can charging rechargeable batteries.

Audiovox CE149MP Operating Instructions

Audiovox CE149MP Manual

Audiovox CE149MP manual content summary: