Audiovox FDTV1A Owners Manual

Audiovox FDTV1A - TERK - TV Antenna Manual

Audiovox FDTV1A manual content summary:

  • Audiovox FDTV1A | Owners Manual - Page 1
    FDTV1a Owner's Manual FDTV1a Flat Antenna Amplified Indoor Television Antenna
  • Audiovox FDTV1A | Owners Manual - Page 2
    1 About Your TERK FDTV1a Flat Antenna Thank you for choosing the TERK FDTV1a. TERK antennas are designed to deliver sharp, clear reception of digital signals. At TERK, our engineering department is dedicated to designing antennas that enhance both the latest technology and the aesthetics of any
  • Audiovox FDTV1A | Owners Manual - Page 3
    2 Installing your FDTV1a antenna Find the best location for the Antenna Before you connect the antenna, determine the best spot in settings, the recommended position is lying flat, attached to the included stand. However, the best position for your antenna may vary depending on your location and
  • Audiovox FDTV1A | Owners Manual - Page 4
    wall, or to the bottom for standing the antenna upright. To lay the FDTV1a flat or mount it to your wall: 1. Push the screws through the holes on the bottom of the stand. 2. Line the stand up with the holes on the back of the antenna. Use a Phillips-head screwdriver to attach the stand to
  • Audiovox FDTV1A | Owners Manual - Page 5
    stand up with the holes on the bottom of the antenna. Use a Phillipshead screwdriver to attach the stand to the bottom of the antenna. Make sure not to overtighten the screws. Connecting the FDTV1a You can use the FDTV1a with or without its amplifier, depending on which connection gives you the best
  • Audiovox FDTV1A | Owners Manual - Page 6
    . FDTV1a Built-In Coaxial Cable ANTENNA Amplifier Insert TV/STB TV 3. Connect the amplifier's builtin cable to the antenna input on your TV. 4. Plug the amplifier's power cord into an electrical outlet. Important: This power unit should be plugged in so that it stays vertical or lays flat
  • Audiovox FDTV1A | Owners Manual - Page 7
    the amplifier directly to your TV: 1. Make sure your TV is turned off. FDTV1a Built-In Coaxial Cable 2. Connect the FDTV1a's built-in coaxial cable to the antenna input on your TV. 3. Run your TV's tuner/channel setup to scan for available broadcast channels. TV 6 Note about digital channels
  • Audiovox FDTV1A | Owners Manual - Page 8
    Box Audio/Video Coaxial Cables -or- Cable TV 2. Connect the FDTV1a's built-in cable to the input jack of the amplifier. 3. Connect the amplifier's cable to the antenna input on the converter box. 4. Follow the directions in the manual that came with your converter box to connect it to your TV
  • Audiovox FDTV1A | Owners Manual - Page 9
    Box Audio/Video Coaxial Cables -or- Cable TV 2. Connect the FDTV1a's built-in cable to the input jack of the amplifier. 3. Connect the amplifier's cable to the antenna input on the converter box. 4. Follow the directions in the manual that came with your converter box to connect it to your TV
  • Audiovox FDTV1A | Owners Manual - Page 10
    FDTV1a 9 Troubleshooting I have a cable ready TV. Why am I not getting any channels above 13? The tuners inside of cable ready TVs have two modes. One mode is for cable and the other mode is for antenna. When the TV is in cable mode, and you are using an antenna, you will not be able to receive
  • Audiovox FDTV1A | Owners Manual - Page 11
    bill of sale), specification of defects(s), transportation prepaid, to the Company at the address shown below. Do not return this product to the Retailer. This Warranty is not transferable and does not cover product purchased, service or used outside the United States or Canada. The Warranty does
  • Audiovox FDTV1A | Owners Manual - Page 12
    For customer service and technical information::1.800.290.6650 FDTV1a US IB 02 For Customer Service Visit Our Website At www.audiovox.com Product Information, Photos, FAQ's, Owner's Manuals
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

FDTV1a
Owner’s Manual
FDTV1a Flat Antenna
Amplified Indoor Television Antenna