Audiovox SIRSWB Installation Guide
Audiovox SIRSWB - FM Switching Module Manual
 |
UPC - 044476017186
View all Audiovox SIRSWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Audiovox SIRSWB manual content summary:
- Audiovox SIRSWB | Installation Guide - Page 1
Guide FM Switching Box (For Use with Audiovox Vehicle Installation Kit SIR-CK1) 1. Remove the existing vehicle radio as required, withdrawing the radio from the dashboard far enough to unplug the antenna cable from the radio antenna jack. 2. Determine the position of the SIR-SWB FM Switching Box - Audiovox SIRSWB | Installation Guide - Page 2
, an optional relay box is available. The Audiovox part number is SIRSWB and plugs into the 1/8" jack on the side of the chassis. This relay box is installed between the vehicle antenna and the car radio to provide the best possible FM reception of the DVD player audio. When the SIRSWB is installed
-
1 -
2
 |
 |
SHUTTLE
1.
Remove the existing vehicle radio as required, withdrawing the radio from the dashboard far enough to unplug the
antenna cable from the radio antenna jack.
2.
Determine the position of the SIR-SWB FM Switching Box
(usually under the dash near the radio), and mount
it
in position.
3.
Plug the male antenna output cable of the SIR-SWB into the existing vehicle radio antenna jack. Plug the vehicle side
radio antenna cable into the SIR-SWB antenna input connector.
NOTE:
Some vehicles use a special dual antenna “Diversity" system. If the vehicle into which this system is being
installed has this type of antenna system,
the antenna cable will not fit the socket on the FM modulator. Use of
the SIR-SWB with “Diversity" systems is not recommended. You may also find some cars have an antenna
plug that is too small to mate with the socket on the FM Switching Box. This adaptor can be purchased at most
car stereo installation centers.
4.
Reposition the radio in the dashboard and secure it in place.
5.
Plug the 3.5mm Stereo connector cable from the SIR-SWB into the “FM OUT” jack on the back of the SIR-CK1.
6.
Choose one of four FM frequencies (88.1MHz, 88.3MHz, 88.5MHz or 88.7MHz), selected with the SIR-CK1 slide switch.
Tune your existing vehicle radio to the same frequency as selected by the slide switch.
SIR-SWB Installation Guide
FM Switching Box
(For Use with Audiovox Vehicle
Installation Kit SIR-CK1)
128-6891A
SHUTTLE
CRADLE
SIR-CK1
FM OUT JACK
TO EXISTING VEHICLE
RADIO ANTENNA JACK
FM SWITCHING
BOX SIR-SWB
FM FREQUENCY
SELECT SLIDE
SWITCH:
88.1 MHz
88.3 MHz
88.5 MHz
88.7 MHz
VEHICLE RADIO (TYP)
TO “FM OUT”
JACK ON BACK
OF SIR-CK1
TO SIR-SWB
ANTENNA
INPUT
NOTE:
MOUNT SIR-SWB UNDER
DASH BETWEEN CK1 AND
EXISTING VEHICLE RADIO
NOTE:
IN SOME INSTALLATIONS IT MAY BE
NECESSARY TO INCLUDE AN ANTENNA
CABLE ADAPTER (PURCHASED SEPA-
RATELY) IF THE EXISTING RADIO ANTENNA
CONNECTOR IS DIFFERENT IN SIZE.
3.5mm STEREO
CONNECTOR
VEHICLE RADIO
ANTENNA