Axis Communications M1025 Assign an IP Address and Access the Video Stream -
Axis Communications M1025 Manual
View all Axis Communications M1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Axis Communications M1025 manual content summary:
- Axis Communications M1025 | Assign an IP Address and Access the Video Stream -
- Page 1
INSTALLATION GUIDE Assign an IP Address and Access the Video Stream - Axis Communications M1025 | Assign an IP Address and Access the Video Stream -
- Page 2
• report problems to Axis support staff by logging in to your private support area • chat with Axis support staff (selected countries only) • visit Axis Support at www.axis.com/techsup/ Learn More! Visit Axis learning center www.axis.com/academy/ for useful trainings, webinars, tutorials and guides. - Axis Communications M1025 | Assign an IP Address and Access the Video Stream -
- Page 3
to the instructions. 5. When the Axis product appears in the window, double-click to open its web pages. 6. For information about how to set the password, see page 6 . AXIS Camera Management - Large Installations AXIS Camera Management is a powerful installation and management tool for Axis network - Axis Communications M1025 | Assign an IP Address and Access the Video Stream -
- Page 4
current user and enter the user name and password to log on with. 5. The first time AXIS Camera Management runs it automatically searches for Axis products on the network. To manually search for products, select Configuration > Add Devices. The software displays a list of the products found. Select - Axis Communications M1025 | Assign an IP Address and Access the Video Stream -
- Page 5
run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restart the product by disconnecting and reconnecting power. 5. Close the command prompt when the product responds with Reply from 192 - Axis Communications M1025 | Assign an IP Address and Access the Video Stream -
- Page 6
Set the Root Password To access the Axis product, you must set the password for is accessed for the first time. To prevent network eavesdropping, the root password can be set via an the product to factory default, see the product's User Manual. To set the password via a standard HTTP connection, - Axis Communications M1025 | Assign an IP Address and Access the Video Stream -
- Page 7
/tilt motor, select Uploadable PTZ driver. For information about how to upload a PTZ driver, see the User Manual available at www.axis.com Camera Mode Some 360°/180° cameras must be configured to use either multiple view modes (dewarped views) or intelligent video applications. Multiple view modes - Axis Communications M1025 | Assign an IP Address and Access the Video Stream -
- Page 8
Dynamic DNS Service at www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup Further Information The User Manual is available at www.axis.com Visit www.axis.com/techsup to check if there is updated firmware available for your network product - Axis Communications M1025 | Assign an IP Address and Access the Video Stream -
- Page 9
Installation Guide Assign an IP Address and Access the Video Stream © Axis Communications AB, 2012 - 2013 Ver. M1.18 Date: March 2013 Part No. 51375
INSTALLATION GUIDE
Assign an IP Address and Access the Video Stream