Axis Communications M1025 M1025 Network Camera - User Manual
Axis Communications M1025 Manual
View all Axis Communications M1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Axis Communications M1025 manual content summary:
- Axis Communications M1025 | M1025 Network Camera - User Manual - Page 1
USER MANUAL AXIS M1025 Network Camera - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 2
About this Document This manual is intended for administrators and users of the AXIS M1025 Fixed Dome Network Camera, and is applicable to firmware 5.4 and later. It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 3
20~80 4.9~5.1V DC, Max. 6.5W 또는Power over Ethernet IEEE 802.3af/802.3at Type1 Class1 Axis Communications AB Network Camera (M1025 MSIP-REM-PNB-M1025 Axis Communications AB/Sweden A/S정보 Axis Communications AB 685 1012호 TEL : 82-2-780-9636 FAX : 82-2-6280-9636 Safety This product complies with - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 4
& Time 37 Network 37 Storage 43 Maintenance 44 Support 44 Advanced 45 Reset to Factory Default Settings 46 Troubleshooting 47 Checking the Firmware 47 Upgrading the Firmware 47 Symptoms, Possible Causes and Remedial Actions 48 Problems Retrieving Additional Video Streams 50 Technical - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 5
AXIS M1025 Network Camera Hardware Overview Hardware Overview 4 1 5 2 6 3 7 8 9 10 11 12 13 1. Status LED indicator 2. Focus ring 3. Lens 4. Network connector (PoE) 5. Power connector 6. Lock ring 7. Control button 8. SD card slot 9. Power LED 10. Network LED 11. Wireless indicator - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 6
AXIS M1025 Network Camera Hardware Overview NOTICE To prevent corruption of recordings, the SD card : • Resetting the product to factory default settings. See page 46. • Connecting to an AXIS Video Hosting System service. See page 39. To connect, press and hold the button for about 1 second until - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 7
AXIS M1025 Network Camera Accessing the Product Accessing the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 8
from Setup > System Options > Network > TCP/IP Advanced. For more information, see NAT traversal (port mapping) for IPv4, on page 40. See also AXIS Internet Dynamic DNS Service at www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup Set the - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 9
AXIS M1025 Network Camera Accessing the Product Select the desired capture mode from the drop Profile drop-down list. For information about how to configure stream profiles, see page 18. The Manual Trigger button is used to trigger an action rule from the Live View page. For information about how - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 10
AXIS M1025 Network Camera Accessing the Product 4. From the second drop-down list, select Manual Trigger. 5. Select the desired action and configure the other settings as required. For more information about action rules, see Events, on page 31. To show the manual trigger buttons in the Live View - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 11
AXIS M1025 Network Camera Accessing the Product Pan and Tilt bars - Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the camera view to that position. The PTZ controls can be disabled under PTZ > Advanced > Controls, see Controls, on page 24. 11 - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 12
AXIS M1025 Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 13
AXIS M1025 Network Camera Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User's Manual access video and images from the Axis product in the following ways: • Motion JPEG server push (if supported by the client, Firefox, for - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 14
AXIS M1025 Network Camera Media Streams Note • = IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. 14 - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 15
AXIS M1025 Network Camera Setting Up the Product Setting Up the Product The Axis product can be configured (see page 46). Basic Setup Basic Setup provides shortcuts to the settings that should be made before using the Axis product: 1. Users. See page 35. 2. TCP/IP. See page 37. 3. Date & Time. See - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 16
AXIS M1025 Network Camera Setting Up the Product Video It is possible to configure the following video features in your Axis product: • Video stream. See page 16. • Stream profiles. See page 18. • Camera settings. See page 18. • View area. See page 19. • Overlay image. See page 20. • Privacy mask. - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 17
AXIS M1025 Network Camera Setting Up the Product Image The default image settings can be or 0°. • Mirror. If required, the image can be mirrored. • Maximum frame rate. To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixed amount. Alternatively, the frame rate - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 18
AXIS M1025 Network Camera Setting Up the Product Stream Profiles A stream profile is a set of predefined stream settings including resolution, compression, frame rate and overlay settings. Stream profiles can - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 19
AXIS M1025 Network Camera Setting Up the Product The image Brightness can be adjusted in colors in the image appear the same regardless of the color temperature of the light source. The Axis product can be set to automatically identify the light source and compensate for its color. Alternatively, - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 20
AXIS M1025 Network Camera Setting Up the Product Note The PTZ functionality is useful during installation of the Axis product. Use a view area to crop out a specific part of and enter the X and Y coordinates. 3. Click Save. For information about supported image formats, see the online help . 20 - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 21
AXIS M1025 Network Camera Setting Up the Product Privacy Mask A privacy mask is an area . Note To view privacy masks in video over HDMI the video stream must be restarted every time the Axis product is restarted. This can be done for example, by selecting a video stream from the Stream Profile - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 22
AXIS M1025 Network Camera Live View Config Live View Config You can customize the Live View page and alter it to suit your requirements. It is possible to define - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 23
AXIS M1025 Network Camera Live View Config Browser Windows Internet Explorer Other browsers using the AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control (AMC), on page 12. User Defined Links To display user-defined links in the Live - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 24
AXIS M1025 Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ preset position: 1. Go to PTZ > Preset Positions. 2. Use the pan, tilt and zoom controls to steer the camera view to the desired position. 3. Enter a descriptive name in the Current position field. The entire view area is - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 25
AXIS M1025 Network Camera PTZ (Pan Tilt Zoom) Note Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to preset positions that require a tilt movement. 25 - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 26
AXIS M1025 Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when should be ignored (areas outside Include windows are automatically ignored). For instructions, see Set Up Motion Detection Windows, on page 27. To control - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 27
AXIS M1025 Network Camera Detectors Note • Using the motion detection feature may decrease the product's overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 28
AXIS M1025 Network Camera Detectors Low level (0%) Recommended values Default values Even very small objects trigger motion detection. 5-15% 15% An object that appears in the window triggers motion - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 29
AXIS M1025 Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis . 5. Configure the application. For instructions, see the documentation provided by the guaranteed by Axis Communications AB. Note that the application must be supported by the - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 30
AXIS M1025 Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings. 30 - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 31
AXIS M1025 Network Camera Events Events The Axis product can be configured to perform actions when Network - Trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card. • Input Signal - Manual Trigger - Trigger the rule using the Manual - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 32
AXIS M1025 Network Camera Events • Send Images - Send images to a recipient. • Send Notifications - Send a notification message to a recipient. • Status LED - Flash the LED indicator. This can for example be - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 33
AXIS M1025 Network Camera Events HTTP Send Images HTTPS Send Notification Send Images Send Notification Network Share2 Send Images TCP Check the email provider's security policy to avoid delivery problems and locked email accounts. 2. A network share can also be used as a storage device for - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 34
AXIS M1025 Network Camera Recordings Recordings The Axis product can be configured to record video continuously or previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings. To start a continuous recording, follow - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 35
AXIS M1025 Network Camera you automatically enable ONVIF communication. Use the user name and password with all ONVIF communication with the product. For (a single entry can contain multiple IP addresses). HTTPS The Axis product supports encrypted browsing using HTTPS. This is configured on the System - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 36
AXIS M1025 Network Camera System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by IEEE 802. - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 37
AXIS M1025 Network Camera be configured. See DNS Configuration, on page 39. • Set manually - Allows you to manually set date and time. If using an NTP server, select your and select Include date and Include time. Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 38
AXIS M1025 Network Camera System Options IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic. DHCP (Dynamic Host Configuration - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 39
AXIS M1025 Network Camera System Options Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced. Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server. To make manual - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 40
AXIS M1025 Network Camera System Options NTP Configuration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced. Select Obtain NTP server address via DHCP to use the NTP settings - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 41
AXIS M1025 Network Camera System Options Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one router - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 42
AXIS M1025 Network Camera System Options The Axis product can be configured to support SNMP on the System Options > Network > SNMP page. Depending on the level of security required, select the version on SNMP to use. SNMP v1/v2 provides the lowest level of security. The community name can be - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 43
AXIS M1025 Network Camera System Options Storage SD Card The Axis product supports product is started. A manual mount is only required problem can be found and then try Repair. This option is only available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 44
you require technical assistance. See also Troubleshooting, on page 47. System Overview To get an overview of the Axis product's status and settings, go to System Options > Support > System Overview. Information that can be found here includes firmware version, IP address, network and security - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 45
AXIS M1025 Network Camera System Options Logs & Reports The System Options > Support > Logs & Reports page generates logs and reports useful for system analysis and troubleshooting. If contacting Axis Support, please provide a valid Server Report with your query. System Log - Provides information - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 46
AXIS M1025 Network Camera System Options Reset to Factory Default Settings Important Reset to management software tools are available on the CD supplied with the product and from the support pages on www.axis.com/techsup To reset the product to the factory default settings: 1. Disconnect power - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 47
AXIS M1025 Network Camera Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problem should be to check the current firmware version. The latest version may contain a - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 48
AXIS M1025 Network Camera Troubleshooting Emergency Recovery Procedure If power or network connection is Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 49
AXIS M1025 Network Camera Troubleshooting The IP address has been changed by DHCP IP addresses obtained from a DHCP server are dynamic and may change. If the IP address has been changed, use AXIS IP Utility or AXIS Camera Management to locate the product on the network. Identify the product using - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 50
AXIS M1025 Network Camera Troubleshooting Lower frame rate than expected See Performance Considerations, on page 54. Reduce the number of applications running on the client computer. Limit the number of simultaneous viewers. Check with the network administrator that there is enough bandwidth - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 51
AXIS M1025 Network Camera Troubleshooting 'Error reading video Stream' message in browser when using the Java applet If 1080p capture mode without HDMI support is selected the following streams are available: Stream 0: Fixed resolution - 1920 x 1080, fixed, cannot be changed Stream 1: Fixed - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 52
Technical Specifications Function/group Camera Video Network Item Model Image sensor Lens Light sensitivity Shutter time Pan/Tilt/Zoom Video compression Resolutions Frame rate H.264 Frame rate Motion JPEG Video streaming Image settings Security Supported protocols Specifications AXIS M1025 - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 53
AXIS M1025 Network Camera Technical Specifications Function/group System Integration General Item Specifications Application Programming Interface Open API for software integration, including VAPIX®, specifications at www.axis.com AXIS Video Hosting System (AVHS) with One-Click Camera - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 54
M1025 Network Camera Technical Specifications Function/group Item Included accessories Video management software Optional accessories Warranty Specifications Power supply, stand and clamp, Installation Guide, Installation and Management Software CD, Windows decoder 1-user license AXIS Camera - Axis Communications M1025 | M1025 Network Camera - User Manual - Page 55
User Manual AXIS M1025 Network Camera © Axis Communications AB, 2014 Ver. M2.4 Date: February 2014 Part No. 52870
USER MANUAL
AXIS M1025 Network Camera