Behringer 995 ATTENUATORS Quick Start Guide
Behringer 995 ATTENUATORS Manual
 |
View all Behringer 995 ATTENUATORS manuals
Add to My Manuals
Save this manual to your list of manuals |
Behringer 995 ATTENUATORS manual content summary:
- Behringer 995 ATTENUATORS | Quick Start Guide - Page 1
Guide 995 ATTENUATORS Specifications Legendary Analog Attenuator Module for Eurorack Controls Signal Input Type Impedance Maximum input level Signal Output Type Impedance Maximum output level Controls Attenuators Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are
-
1
 |
 |
Quick Start Guide
995 ATTENUATORS
Legendary Analog Attenuator
Module for Eurorack
Controls
Attenuator knobs
– Adjust the level of the input signal passively
from -∞ to unity (0 dB).
IN and OUT jacks
– A single input connected to the top
attenuator will pass to all 3 outputs when all the attenuators
are open. Additional inputs in the lower attenuators will break the
chain so that input 1 (top) will only feed output 1, input 2 will only
feed output 2 and input 3 will only feed output 3.
Installation
The necessary screws are included with the module for mounting
in a Eurorack case. Connect the power cable before mounting.
Depending on the rack case, there may be a series of fixed holes
spaced 2 HP apart along the length of the case, or a track that
allows individual threaded plates to slide along the length
of the case. The free-moving threaded plates allow precise
positioning of the module, but each plate should be positioned in
the approximate relation to the mounting holes in your module
before attaching the screws.
Hold the module against the Eurorack rails so that each of the
mounting holes are aligned with a threaded rail or threaded
plate. Attach the screws part way to start, which will allow
small adjustments to the positioning while you get them all
aligned. After the final position has been established, tighten the
screws down.
Specifications
Signal Input
Type
3.5 mm jack, half
normalled, DC coupled
Impedance
< 25 kΩ, unbalanced
Maximum input level
+20 dBu
Signal Output
Type
3.5 mm jack, DC coupled
Impedance
< 25 kΩ, unbalanced
Maximum output level
+20 dBu
Controls
Attenuators
-∞ to unity gain, passive
Physical
Dimensions
35 x 40 x 129 mm
(1.4 x 1.6 x 5.1")
Rack units
8 HP
Weight
0.08 kg (0.18 lbs)
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and
other information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone
and Coolaudio are trademarks or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd. 2019 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online
at musictribe.com/warranty.
Zhongshan Eurotec Electronics Limited
No. 10 Wanmei Road, South China Modern Chinese Medicine Park,
Nanlang Town, 528451, Zhongshan City, Guangdong Province, China