Behringer ACOUSTIC MODELER AM300 Manual
Behringer ACOUSTIC MODELER AM300 Manual
View all Behringer ACOUSTIC MODELER AM300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Behringer ACOUSTIC MODELER AM300 manual content summary:
- Behringer ACOUSTIC MODELER AM300 | Manual - Page 1
Thank you for showing your confidence in us by purchasing the BEHRINGER ACOUSTIC MODELER AM300. This high-quality modelling effects pedal is designed for all electric guitar players who want to add realistic acoustic guitar sounds to their playing. Thanks to its high-performance features you can - Behringer ACOUSTIC MODELER AM300 | Manual - Page 2
ACOUSTIC MODELER AM300 The AM300 has no on/off switch. As soon as you insert the jack into the IN connector, the AM300 begins running. When not using the AM300, remove the jack from the IN connector. This extends the life of the battery. The SERIAL NUMBER is located at the bottom. 2. WARRANTY For
ACOUSTIC MODELER AM300
Thank you for showing your confidence in us by purchasing the BEHRINGER ACOUSTIC
MODELER AM300. This high-quality modelling effects pedal is designed for all electric
guitar players who want to add realistic acoustic guitar sounds to their playing. Thanks
to its high-performance features you can create everything from standard, large-
resonant, brilliant to bright Piezo pickup simulations.
1. CONTROLS
Top view
The
MODE
switch lets you choose between four different acoustic modes:
STANDARD
produces a typical acoustic guitar sound.
LARGE
delivers a large, more resonant acoustic.
PIEZO
simulates distinct brightness of a classic piezo pickup.
BRIGHT
gives you a brilliant and ultra-present sound, perfect for cutting through
in a live environment.
The
LEVEL
control adjusts the output level.
The
ENHANCE
control determines the amount of brilliance and upper harmonics
added to the overall effect.
The
RES(onance)
control adjusts the resonance of the simulated acoustic guitar
body.
The
ON/BATT
-LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS
IN
connector to plug in the instrument cable.
The 1/4" TS
OUT
connector sends the signal to your amp.
The 1/4" TS
DIR OUT
connector plays the uneffected signal to connect for example
a separate amp for electric guitar sound.
If you just use the OUT connector, it will play the effected signal and, when
deactivated, the uneffected signal. When using both the OUT
and the DIR
OUT, the AM300 acts like an A/B box. This means when activated, the OUT
plays the
effected signal while the DIR OUT is muted. When deactivated
the OUT is muted while the DIR OUT plays the
uneffected signal.
Use the
DC IN
connection at the front of the unit to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.