Behringer BASS LIMITER ENHANCER BLE100 Manual

BASS LIMITER ENHANCER BLE100

Thank you for showing your confidence in us by purchasing the BEHRINGER BASS LIMITER

ENHANCER BLE100. This ultimate effects pedal is specifically designed to smoothen harsh volume

peaks when using dynamic slaps or other playing styles. Thanks to its high-performance features

you get full dynamics and tone control for absolute flexibility and limitless creative options.

A limiter reduces the dynamic range of a signal. This means that signal peaks will be attenuated

and the level differences between loudest and softest playing are reduced. This results in a more

powerful and pressure-rich tone. The loss of high frequencies due to compression can be

compensated by using an enhancer that adds high-frequency harmonics to the sound.

1. CONTROLS

Top view

The

LEVEL

control adjusts the output level.

Turn up the

ENHANCE

control to achieve more presence and bass clarity.

The

RATIO

control determines the amount of compression when the chosen

threshold (see below) value is exceeded.

Use the

THRESH(old)

control to define a level threshold. When this value is exceeded

by the input signal, the BLE100 starts limiting with the chosen amount of ratio.

The

ON/BATT

LED illuminates when the effect is activated. It also serves as a

battery level indicator.

Use the footswitch to activate/deactivate the effect.

Use this 1/4" TS

IN

connector to plug in the instrument cable.

The 1/4" TS

OUT

connector sends the signal to your amp.

Use the

DC IN

connection to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located underneath the pedal cover. To install or

replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be

careful not to scratch the unit.