Behringer BUC400 Manual

Ultimate Bass Chorus Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA BASS CHORUS BUC400.

This ultimate effects pedal is specifically designed to match the range and applications of bass guitars.

Thanks to its high-performance features you get super thick chorus with unbelievable stereo effect.

The chorus effect slightly detunes the original signal. A very pleasant detune effect is created relative to

the pitch variation. The chorus effect is often used for dispersing signals.

1.

Controls

(1)

The

LEVEL

control adjusts the output level.

(2)

The

LOW FILTER

control lowers the amount of ultra-low frequencies in the effect signal to achieve

more defined tone and avoid muddiness of sound.

(3)

The

RATE

control determines the chorus effect speed.

(4)

Turn up the

DEPTH

control to achieve a more full and deeper effect sound.

(6)

Use the footswitch to activate/deactivate the effect.

(7)

Use this °" TS

IN

connector to plug in the instrument cable.

(8)

The two °" TS connectors

OUT A

and

OUT B

send the signal to your amp. Use both connectors if

you want to achieve full stereo chorus effect. For mono use just plug in OUT A.

Use the

DC IN

connection at the front of the unit to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located underneath the pedal cover. To install or replace the 9 V battery,

press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.

(5)

(1)

(7)

(4)

(6)

(3)

(2)

(8)