Behringer COMPRESSOR/LIMITER CL9 Manual

Classic Compressor/Limiter Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER COMPRESSOR/LIMITER CL9.

This ultimate effects pedal is specifically designed to achieve super-smooth compression and

extended sustain. Thanks to its high-performance features you can compress loud and boost low

signals without degrading the original sound.

A compressor limits the dynamic range of a signal. This means that signal peaks will be attenuated

and the level differences between loudest and softest playing are reduced. This results in a more

powerful tone.

1.

Controls

(1)

The

ATTACK TIME

control determines how fast the compressor responds to input signal peaks.

(2)

The

LEVEL

control adjusts the output level.

(3)

The

SUSTAIN

control determines the amount of compression.

(4)

The

ON/BATT

LED illuminates when the effect is activated. It also serves as a

battery level indicator.

(5)

Use the footswitch to activate/deactivate the effect.

(6)

Use this °" TS

IN

connector to plug in the instrument cable.

(7)

The °" TS

OUT

connector sends the signal to your amp.

Use the

DC IN

connection to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located underneath the pedal cover. To install or replace the 9 V battery

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to

scratch the unit.

(2)

(7)

(3)

(5)

(6)

(1)

(4)