Behringer DIGITAL DELAY DD400 Manual
Behringer DIGITAL DELAY DD400 Manual
 |
View all Behringer DIGITAL DELAY DD400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Behringer DIGITAL DELAY DD400 manual content summary:
- Behringer DIGITAL DELAY DD400 | Manual - Page 1
confidence in us by choosing the BEHRINGER DIGITAL DELAY DD400. This ultimate effects pedal is designed to deliver 24-bit high-resolution stereo delay sounds comparable to state-of-the-art studio processors. Thanks to its parameter controls and built-intap tempo feature, you'll have plenty of cool - Behringer DIGITAL DELAY DD400 | Manual - Page 2
DIGITAL DELAY DD400 The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit. The DD400 has no on/off switch. As soon as you insert the jack into the in - Behringer DIGITAL DELAY DD400 | Manual - Page 3
DIGITAL DELAY DD400 Responsible party name: Address: Phone/Fax No.: MUSIC Group Services USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +1 425 672 0816 Fax: +1 425 673 7647 DIGITAL DELAY DD400 in accordance with the instructions, may cause harmful behringer.com
-
1 -
2 -
3
 |
 |
DIGITAL DELAY DD400
Thank you for showing your con
fi
dence in us by choosing the BEHRINGER DIGITAL DELAY
DD400. This ultimate effects pedal is designed to deliver 24-bit high-resolution stereo delay
sounds comparable to state-of-the-art studio processors. Thanks to its parameter controls and
built-intap tempo feature, you’ll have plenty of cool sounds at your disposal to handle every
situation.
The delay effect creates a delay of the input signal with various repetitions. Different tempo
settings allow interesting delay effects.
1. CONTROLS
4
3
5
2
1
8
7
6
Top view
The LEVEL control adjusts the output level.
{1}
The FEEDBACK (Feedback) control adjusts the amount of signal repetitions.
{2}
The TIME (Delay Time) control adjusts the exact delay time.Depending on the MODE
{3}
control position you can adjust it around 200 ms, 500 ms or 1300 ms. The delay time
describes how fast the signal repetitions will follow after the original signal.
With the MODE control you can chose between three different delay time ranges
{4}
around 200 ms, 500 ms or 1300 ms with either mono (M) or stereo (S) delay. The exact
delay time can be adjusted by the TIME control. In position HOLD the signal will be
repeated constantly.
The ON/BATT LED illuminates when the effect is activated. It also serves as a battery
{5}
level indicator.
Use the footswitch to activate/deactivate the effect. The built-in tap tempo feature is
{6}
also accessed through this switch.
Hold the footswitch down for at least one second and release to enter tap mode. The
•
LED will blink in rhythm with the current tempo.
Tap the footswitch to the desired tempo. The pedal will measure the time between
•
the last two taps and automatically employ this as the delay time. The LED will now
fl
ash in rhythm with the new tempo.
After a few seconds, the unit will automatically exit tap mode and the footswitch can
•
be used to activate/deactivate the effect again.
Turning the Time knob will override the tapped tempo and the delay will be deter-
•
mined by the settings of the Mode and Time knobs.
Use this ¼" TS IN connector to plug in the instrument cable.
{7}
The two ¼" TS connectors OUT A and OUT B send the signal to your amp. Use both
{8}
connectors if you want to achieve full stereo delay effect. For mono use just plug in
OUT A.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply
(not included).