Behringer DIGITAL REVERB DR600 Manual
Behringer DIGITAL REVERB DR600 Manual
 |
View all Behringer DIGITAL REVERB DR600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Behringer DIGITAL REVERB DR600 manual content summary:
- Behringer DIGITAL REVERB DR600 | Manual - Page 1
Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL REVERB DR600. This ultimate effects pedal is specifically designed to deliver 24-bit highresolution stereo reverbs comparable to state-of-the-art studio processors. Thanks to six renowned modes and extensive parameter - Behringer DIGITAL REVERB DR600 | Manual - Page 2
DIGITAL REVERB DR600 2. WARRANTY For our current warranty terms, please refer to our website at http://www.behringer.com. In A Connector Impedance Impedance mono In B Connector Impedance Out A Connector Impedance Out B Connector Impedance Power supply Power connector Battery Power consumption - Behringer DIGITAL REVERB DR600 | Manual - Page 3
Services USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +1 425 672 0816 Fax: +1 425 673 7647 DIGITAL REVERB DR600 complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested accordance with the instructions, may cause behringer.com
-
1 -
2 -
3
 |
 |
DIGITAL REVERB DR600
Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL
REVERB DR600. This ultimate effects pedal is specifically designed to deliver 24-bit high-
resolution stereo reverbs comparable to state-of-the-art studio processors. Thanks to
six renowned modes and extensive parameter control for maximum creativity you’ll have
plenty of cool sounds at your disposal for every situation.
1. CONTROLS
Top view
The
LEVEL
control adjusts the output level.
The
TONE
control allows you to shape your overall sound.
The
TIME
control determines the reverb time.
The
MODE
control lets you chose between six different reverb sounds:
SPRING
:
Simulates classic spring reverberation.
PLATE
:
Simulates the sound of plate reverberation.
HALL
:
Very bright reverb that simulates the reflections of a concert hall.
GATE
:
This effect synthetically cuts off reverberation after a period of time.
ROOM
:
Clearly hear natural room acoustics.
MODULATE
:
By detuning the reverb tail it creates spacious, almost choir-like
reverb that reminds a little bit of a chorus effect.
The
ON/BATT
LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use the two 1/4" TS connectors
IN A
and
IN B
to plug in a stereo input signal. For
mono use just plug in IN A.
The two 1/4" TS connectors
OUT A
and
OUT B
send the signal to your amp. Use both
connectors if you want to achieve full stereo effect. For mono use just plug in OUT A.
Use the
DC IN
connection at the front of the unit to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.
The DR600 has no on/off switch. As soon as you insert the jack into the IN
connector, the DR600 begins running. When not using the DR600, remove
the jack from the IN connector. This extends the life of the battery.
The
SERIAL NUMBER
is located at the bottom.