Behringer HEAVY DISTORTION HD300 Manual

Heavy Metal Distortion Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER HEAVY DISTORTION HD300.

This high-quality effects pedal enables you to produce super thick, tube-like distortion plus

endless sustain. Thanks to its high-performance features you can achieve the typical hard rock

or heavy metal distortion sounds, when playing over a clean amp channel.

1.

Controls

(1)

The

LEVEL

control adjusts the output level.

(2)

The

TONE

control allows you to shape your overall sound.

(3)

The

BOTTOM

control allows you to boost/cut the low-frequency range.

(4)

The

DIST(ortion)

control adjusts the amount of distortion.

(5)

The

GAIN BOOST

control adjusts the gain for more extreme distortion sounds.

(6)

The

ON/BATT

LED illuminates when the effect is activated. It also serves as a battery level indicator.

(7)

Use the footswitch to activate/deactivate the effect.

(8)

Use this ¼" TS

IN

connector to plug in the instrument cable.

(9)

The ¼" TS

OUT

connector sends the signal to your amp.

Use the

DC IN

connection to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located underneath the pedal cover. To install or replace the 9 V battery

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to

scratch the unit.

◊

The HD300 has no on/off switch. As soon as you insert the plug into the in connector,

the HD300 is on. When not in use, remove the plug from the in connector. This extends

the life of the battery.

The

SERIAL NUMBER

is located at the underside.

(1)

(3)

(9)

(5)

(6)

(8)

(7)

(2)

(4)