Behringer POWER OVERDRIVE PO300 Manual

POWER OVERDRIVE PO300

Thank you for showing your confidence in us by purchasing the BEHRINGER POWER

OVERDRIVE PO300. This high-quality effects pedal enables you to produce super thick,

tube-like overdrive plus endless sustain. Thanks to its high-performance features you

can achieve classic hard rock or heavy metal overdrive sounds.

1. CONTROLS

Top view

The

LEVEL

control adjusts the output level.

The

PHAT

control modifies the frequency range to achieve a more robust and

“fatter” sound.

The

POWER

control adjusts the strength of the sound. High settings provide a

more mid-accentuated sound, while low settings cut away some midrange energy.

The

DRIVE

control adjusts the amount of overdrive effect.

The

ON/BATT

LED illuminates when the effect is activated. It also serves as a

battery level indicator.

Use the footswitch to activate/deactivate the effect.

Use this 1/4" TS

IN

connector to plug in the instrument cable.

The 1/4" TS

OUT

connector sends the signal to your amp.

Use the

DC IN

connection to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located underneath the pedal cover. To install or

replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove

the pedal cover. Be careful not to scratch the unit.

The PO300 has no on/off switch. As soon as you insert the plug into the IN

connector, the PO300 is on. When not in use, remove the plug from the IN

connector. This extends the life of the battery.

The

SERIAL NUMBER

is located at the underside.