Behringer UD300 Manual

2-Mode Distortion Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA DISTORTION UD300.

This high-quality effects pedal delivers two distortion pedals in one—from blues-rock rhythms to

searing leads. It features a mode switch that lets you choose between two different basic distortion sounds.

You’ll achieve the right tone for heavy metal leads, hard rock chordwork and much more.

1.

Controls

(1)

Use the

ULTRA

switch to chose between the two different distortion modes.

Mode 1 provides warm and mellow distortion with flat frequency response.

Mode 2 delivers biting distortion with a mid range boost that is perfect for leads.

(2)

The

LEVEL

control adjusts the output level.

(3)

The

TONE

control allows you to shape your overall sound.

(4)

The

DIST(ortion)

control adjusts the amount of distortion effect.

(5)

The

ON/BATT

LED illuminates when the effect is activated. It also serves as a battery level indicator.

(6)

Use the footswitch to activate/deactivate the effect.

(7)

Use this ¼" TS

IN

connector to plug in the instrument cable.

(8)

The ¼" TS

OUT

connector sends the signal to your amp.

Use the

DC IN

connection at the front of the unit to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located underneath the pedal cover. To install or replace the 9 V battery,

press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.

◊

◊

The UD300 has no on/off

switch. As soon as you insert the jack into the in connector,

the UD300 begins running. When not using the UD300, remove the jack from the

in connector. This extends the life of the battery.

The

SERIAL NUMBER

is located at the bottom.

(5)

(1)

(8)

(6)

(3)

(2)

(4)

(7)