Behringer ULTRA CHORUS UC200 Manual
Behringer ULTRA CHORUS UC200 Manual
 |
View all Behringer ULTRA CHORUS UC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Behringer ULTRA CHORUS UC200 manual content summary:
- Behringer ULTRA CHORUS UC200 | Manual - Page 1
ULTRA CHORUS UC200 Ultimate Stereo Chorus Effects Pedal Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA CHORUS UC200. This ultimate effects pedal is designed to deliver super-thick chorus with unbelievable stereo effect. Thanks to its high-performance features you'll - Behringer ULTRA CHORUS UC200 | Manual - Page 2
ULTRA CHORUS UC200 ◊ The UC200 has no on/off switch. As soon as you insert the jack into the in connector, the UC200 begins running. When not using the UC200, remove the jack from the in connector. This extends the life of the battery. The SERIAL NUMBER is located at the bottom. 2. Safety
-
1 -
2
 |
 |
ULTRA CHORUS UC200
Ultimate Stereo Chorus Effects Pedal
Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA CHORUS UC200.
This ultimate effects pedal is designed to deliver super-thick chorus with unbelievable stereo effect.
Thanks to its high-performance features you’ll have full parameter control for absolute flexibility and
limitless creative options.
The chorus effect slightly detunes the original signal. A very pleasant detune effect is created in connection
with the pitch variation. The chorus effect is used often and quite extensively used for dispersing signals.
1.
Controls
(1)
The
LEVEL
control adjusts the output level.
(2)
The
TONE
control allows you to adjust the overall effects sound and achieve a more defined and
brilliant tone.
(3)
The
RATE
control determines the chorus effect speed.
(4)
Turn up the
DEPTH
control to achieve a fuller, deeper effect sound.
(5)
The
ON/BATT
LED illuminates when the effect is activated. It also serves as a battery level indicator.
(6)
Use the footswitch to activate/deactivate the effect.
(7)
Use this ¼" TS
IN
connector to plug in the instrument cable.
(8)
The two ¼" TS connectors
OUT A
and
OUT B
send the signal to your amp. Use both connectors if
you want to achieve full stereo chorus effect. For mono use just plug in OUT A.
Use the
DC IN
connection to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or replace the 9 V battery,
press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
(5)
(1)
(6)
(7)
(3)
(2)
(4)
(8)