Behringer ULTRA FUZZ UZ400 Manual

Classic Fuzz Distortion Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA FUZZ UZ400.

This effects pedal is ideally suited for electric guitars and recreates the classic and burning fuzz tone

of the ‘60s and ‘70s.

1.

Controls

(1)

The

LEVEL

control adjusts the output level.

(2)

The

TONE

control allows you to shape your overall sound.

(3)

The

FUZZ

control adjusts the intensity of the fuzz distortion effect.

(4)

The

ON/BATT

LED illuminates when the effect is activated. It also serves as a battery

level indicator.

(5)

Use the footswitch to activate/deactivate the effect.

(6)

Use this °" TS

IN

connector to plug in the instrument cable.

(7)

The °" TS

OUT

connector sends the signal to your amp.

Use the

DC IN

connection to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located underneath the pedal cover. To install or replace the 9 V battery

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to

scratch the unit.

◊

The UZ400 has no on/off switch. As soon as you insert the plug into the in connector,

the UZ400 is on. When not in use, remove the plug from the in connector. This extends

the life of the battery.

The

SERIAL NUMBER

is located at the underside.

(4)

(1)

(7)

(6)

(3)

(5)

(2)