Behringer ULTRA SHIFTER/HARMONIST US600 User Manual

Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA SHIFTER/HARMONIST US600.

This high-quality effects pedal shifts single notes and chords and even creates intelligent harmonies to your notes—

at the touch of a footswitch. Take off with incredible Tremolo Arm/Flutter effects to bend single notes or simulate the

movement of the tremolo bar.

1.

Controls

(1)

The

D TIME/SPEED

control has 2 different

functions depending on the effect mode

selected. For TREM BAR and FLUTTER mode

it adjusts the speed of the pitch change.

When using DETUNE mode it controls the

delay time of the effect. In PITCH SHIFTER and

HARMONIST mode this control is not active.

(2)

The

BALANCE

control adjusts the balance

between the direct signal and the effect signal

in PITCH SHIFTER, DETUNE and HARMONIST

mode. At minimum position only the direct

signal is provided while at maximum

position only the effect signal will be heard.

In TREM BAR and FLUTTER modes this control

adjusts the output level of the effects pedal.

(3)

The

HR KEY

control is used in HARMONIST mode

to determine the key you are playing in.

This assures that the right notes fitting with the

harmonic preconditions are generated by the

effect. You can select out of 10 different keys:

(4)

The

PITCH

control adjusts the amount of pitch shifting. In HARMONIST mode it selects the interval

added to the direct signal.

(5)

Use the

MODE

control to select one of 5 different effect styles.

PITCH SHIFTER:

Adds a detuned signal to the original signal with a maximum of 2 octaves above or below.

Use the PITCH control to select the degree of pitch shift (-24, -12, -7, -5, -2, -1, +3, +4, +5, +7, +12, +24).

HARMONIST:

Adds harmonies to the original signal with a maximum of 2 octaves above or below. Use the

PITCH control to select the desired interval (-2 Oct, -1 Oct, -6th, -5th, -4th, -3rd, +3rd, +4th, +5th, +6th, +1 Oct,

+2 Oct). The intervals are dynamic and adapt to the key determined with the HR KEY control.

DETUNE:

Adds a subtle detuned signal to the original signal with a maximum of 30 cents above or below

(-30 C, -25 C, -20 C, -15 C, -10 C, -5 C, +5 C, +10 C, +15 C, +20 C, +25, +30 C). Use the PITCH control to adjust the

amount of detuning and the D TIME/SPEED control to determine the delay time.

TREM BAR:

Detunes the input signal with a maximum of 2 octaves above or below similar to the effect created

with a guitar vibrato arm. Use the PITCH control to adjust the amount of detuning (-12, -5, -4, -3, -2, -1, +1, +2,

+3, +4, +5, +12) and the D TIME/SPEED control to determine the time used to reach the defined pitch value.

The effect is only active when you keep the footswitch depressed.

FLUTTER:

Detunes the input signal periodically with a maximum of 1 octave above or below similar to the

effect created with a fast moving guitar vibrato arm. Use the PITCH control to adjust the amount of detuning

(-12, -5, -4, -3, -2, -1, +1, +2, +3, +4, +5, +12) and the D TIME/SPEED control to determine the time used to

reach the defined pitch value. The effect is only active when you keep the footswitch depressed.

(6)

The

ON/BATT

LED illuminates when the effect is activated.

(7)

Use the footswitch to activate/deactivate the effect.

(8)

Use this °" TS IN connector to plug in the instrument cable.

1.

C major (A minor)

2.

G major (E minor)

3.

D major (B minor)

4.

A major (F# minor)

5.

E major (C# minor)

6.

B major (G# minor)

7.

Gb major (D# minor)

8.

Db major (Bb minor)

9.

Ab major (Fm minor)

10. Eb major (C minor)

11. Bb major (G minor)

12. F major (D minor)

(2)

(1)

(5)

(6)

(8)

(10)

(7)

(3)

(4)

(9)

ULTRA SHIFTER/HARMONIST US600

Ultimate Pitch Shifter / Harmonist Effects Pedal

Behringer ULTRA SHIFTER/HARMONIST US600 User Manual

Behringer ULTRA SHIFTER/HARMONIST US600 Manual

Behringer ULTRA SHIFTER/HARMONIST US600 manual content summary: