Behringer ULTRA WAH UW300 Manual

Ultimate Auto-Wah Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA WAH UW300.

This high-quality effects pedal delivers auto-wah effects for almost all styles and sounds. Control the

wah effect with your string-picking strength and add an awesome funky touch with the modulation

wah pedal.

1.

Controls

(1)

The

RATE

control determines the speed of the wah effect modulation.

(2)

The

DEPTH

control adjusts the sweep range of the effect. Turn it to the right to increase the range.

At minimum position no modulation effect is produced and the wah effect is controlled by your

playing intensity only. In this case the RATE control has no function.

(3)

The

MANUAL

control adjusts the basic frequency where the effect starts working.

High MANUAL settings will decrease the sweep range, because the low end of the frequency

sweep is moved upwards.

(4)

The

SENS

control adjusts the sensitivity of the effect. Nearer maximum position you achieve wah

effect even with soft playing, nearer minimum position the wah effect will not be dependent on

your playing dynamics.

(5)

The

ON/BATT

LED illuminates when the effect is activated. It also serves as a battery

level indicator.

(6)

Use the footswitch to activate/deactivate the effect.

(7)

Use this °" TS

IN

connector to plug in the instrument cable.

(8)

The °" TS

OUT

connector sends the signal to your amp.

Use the

DC IN

connection to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located underneath the pedal cover. To install or replace the 9 V battery

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to

scratch the unit.

(5)

(1)

(7)

(4)

(6)

(3)

(2)

(8)