Behringer VINTAGE PHASER VP1 Manual

Authentic Vintage-Style Phase Shifter

Thank you for showing your confidence in us by purchasing the BEHRINGER VINTAGE PHASER VP1.

This high-quality effect pedal is designed for all musicians who want to their sound some extra pep.

Thanks to its high-performance features you get authentic and classic three dimensional phase

shifting—from rapid rotary speaker to impressive jet plane effects.

With the phaser, a second, phase-shifted signal is added to the original audio signal. The resulting sound

is thicker and above all livelier. This effect is often used for guitar sounds and keyboards. In the ’70s,

it was also extensively used for other instruments like electric pianos.

1.

Controls

(1)

The

RATE

control determines the speed of the phase shifting effect.

(2)

The

TONE

switch lets you chose between negative feedback (lower position) or positive feedback

(upper position) phaser modes. Negative feedback means that the delayed signal is inverted before it

is fed back to the original signal. In positive feedback mode the delayed signal is not inverted. In this

case the effect has a more detuned character enabling to use the unit as vibrato effect for example.

(3)

The

STATUS

LED illuminates when the effect is activated.

(4)

Use the footswitch to activate/deactivate the effect.

(5)

Use this ¼" TS

INPUT

connector to plug in the instrument cable.

(6)

The ¼" TS

OUTPUT

connector sends the signal to your amp.

Use the

DC IN

connection at the front of the unit to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located on the bottom. Open the lid to install or replace the 9 V battery.

◊

The VP1 has no on/off switch. As soon as you insert the jack into the in connector,

the VP1 begins running. When not using the VP1, remove the jack from the in connector.

This extends the life of the battery.

The

SERIAL NUMBER

is located on the bottom.

(2)

(6)

(5)

(3)

(4)

(1)