Behringer VINTAGE TUBE OVERDRIVE TO800 Manual

Vintage Tube-Sound Overdrive Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER VINTAGE TUBE

OVERDRIVE TO800. This high-quality effects pedal is ideally suited for giving electric guitars maximum

flexibility with classic overdrive sounds that capture every nuance of your playing—from smooth

overdrive to screaming tube sounds. Thanks to its high-performance features you get tube-like

vintage-style distortion, smooth sustain and super fat tone.

1.

Controls

(1)

The

DRIVE

control adjusts the intensity of the overdrive effect.

(2)

The

LEVEL

control adjusts the output level.

(3)

The

TONE

control allows you to shape your overall sound.

(5)

Use the footswitch to activate/deactivate the effect.

(6)

Use this °" TS

IN

connector to plug in the instrument cable.

(7)

The °" TS

OUT

connector sends the signal to your amp.

Use the

DC IN

connection at the front of the unit to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located underneath the pedal cover. To install or replace the 9 V

battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.

◊

The TO800 has no on/off switch. As soon as you insert the jack into the in connector,

the TO800 begins running. When not using the TO800, remove the jack from the

in connector. This extends the life of the battery.

The

SERIAL NUMBER

is located at the bottom.

(1)

(7)

(4)

(2)

(6)

(5)

(3)