Behringer XENYX 1002 User Manual

Behringer XENYX 1002 Manual

Get Behringer XENYX 1002 PDF manuals and user guides View all Behringer XENYX 1002 manuals
Add to My Manuals
Save this manual to your list of manuals

Behringer XENYX 1002 manual content summary:

  • Behringer XENYX 1002 | User Manual - Page 1
    XENYX 502/802/1002/1202 User Manual A50-57613-00003
  • Behringer XENYX 1002 | User Manual - Page 2
    XENYX 502/802/1002/1202 Important Safety Instructions **This symbol, wherever it instructions in the accompanying literature. Please read the manual. Caution ++ To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing
  • Behringer XENYX 1002 | User Manual - Page 3
    6 2.2.1 Stereo line inputs 6 2.2.2 Equalizer stereo channels (802 6 2.2.3 FX sends, balance and level adjustment 6 2.3 Connector panel and main section 6 2.3.1 Send/return effects path 6 2.3.2 Monitor and main mix 6 2.3.3 CD/Tape connectors 7 2.3.4 Signal assignment 7 2.3.5 Phantom power and
  • Behringer XENYX 1002 | User Manual - Page 4
    recording devices/crossover/ power amplifier(s). All other mixer functions can be included in this main function. The interface of BEHRINGER mixing consoles is optimized for these tasks enabling you to easily keep track of the signal path. 1.2 The user's manual The user's manual is designed to give
  • Behringer XENYX 1002 | User Manual - Page 5
    components. 2.1.3 FX sends, panorama and level adjustment Fig. 2.1: Connectors and controls of mic/line inputs MIC Each mono input channel offers a balanced microphone input via the XLR connector and also features switchable +48 V phantom power supply for condenser microphones. The XENYX preamps
  • Behringer XENYX 1002 | User Manual - Page 6
    502/802/1002/1202 2.2 Stereo channels 2.2.1 Stereo line inputs +4/-10 The stereo inputs of the XENYX 1002 and 1202 have an input sensitivity switch which selects between +4 dBu and -10 dBV. At -10 dBV (home-recording level), the input is more sensitive (requires less level to drive it) than at
  • Behringer XENYX 1002 | User Manual - Page 7
    standard stereo line input, so the output of a second XENYX or BEHRINGER ULTRALINK 1002/1202 only) The red +48 V LED lights up when phantom power is on. The PHANTOM switch activates the phantom power supply on the XLR connectors of all mono channels. ++ Please do not connect microphones to the mixer
  • Behringer XENYX 1002 | User Manual - Page 8
    XENYX 502/802/1002/1202 tions (0 dB). Then use the TRIM controls to increase the input amplification until signal peaks show 0 dB on the level meter. When recording to digital recorders, the recorder's peak meter should not go into overload. While analog recorders can be overloaded to some extent,
  • Behringer XENYX 1002 | User Manual - Page 9
    dB / -98 dB A-weighted Main mix @ 0 dB, channel fader @ 0 dB -84 dB / -87 dB A-weighted XENYX 502/802/1002/1202 Power supply 502 Power consumption 13 W Mains voltage USA/Canada, 120 V~, 60 Hz BEHRINGER PSU MX3UL Europe/U.K./Australia, 230 V~, 50 Hz BEHRINGER PSU MX3EU China, 220 V~, 50 Hz
  • Behringer XENYX 1002 | User Manual - Page 10
    strings, illuminants and similar parts. 4. Damage/defects caused by the following conditions are not covered by this warranty: == improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals. == connection or operation of
  • Behringer XENYX 1002 | User Manual - Page 11
    INFORMATION XENYX 502/802/1002/1202 Responsible party name: Address: Phone/Fax No.: BEHRINGER USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +1 425 672 0816, Fax: +1 425 673 7647 hereby declares that the product(s) XENYX 502 XENYX 802 XENYX 1002 XENYX 1202 complies
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
XENYX
502/802/1002/1202
User Manual
A50-57613-00003