Behringer XENYX 802 User Manual
Behringer XENYX 802 Manual
View all Behringer XENYX 802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Behringer XENYX 802 manual content summary:
- Behringer XENYX 802 | User Manual - Page 1
XENYX 502/802/1002/1202 User Manual A50-57613-00003 - Behringer XENYX 802 | User Manual - Page 2
during lightning storms or when unused for long periods of time. 16) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the - Behringer XENYX 802 | User Manual - Page 3
6 2.2.1 Stereo line inputs 6 2.2.2 Equalizer stereo channels (802 6 2.2.3 FX sends, balance and level adjustment 6 2.3 Connector panel and main section 6 2.3.1 Send/return effects path 6 2.3.2 Monitor and main mix 6 2.3.3 CD/Tape connectors 7 2.3.4 Signal assignment 7 2.3.5 Phantom power and - Behringer XENYX 802 | User Manual - Page 4
up to 60 dB gain and +48 volt phantom power supply == They enable you to use the greatly extended dynamic range of your 24-bit/192-kHz HD recorder to the full, thereby maintaining optimal audio quality "British EQ" The equalizers used for the XENYX Series are based on the legendary circuitry of top - Behringer XENYX 802 | User Manual - Page 5
. 2.1.3 FX sends, panorama and level adjustment Fig. 2.1: Connectors and controls of mic/line inputs MIC Each mono input channel offers a balanced microphone input via the XLR connector and also features switchable +48 V phantom power supply for condenser microphones. The XENYX preamps provide - Behringer XENYX 802 | User Manual - Page 6
EQ's will usually produce an unwanted discrepancy between the left and right channels. 2.2.3 FX sends, balance and level adjustment Fig. 2.7: FX send/return connectors Fig. 2.8: FX send/return controls STEREO AUX RETURN 802 only: the STEREO AUX RETURN connectors are used to bring the output - Behringer XENYX 802 | User Manual - Page 7
or monitor speaker(s), press the FX TO CTRL switch. This mutes the main mix signal while routing the FX SEND output to the monitor(s). The XENYX 802 and 502 do not feature this switch. 2.3.5 Phantom power and LED displays Fig. 2.13: Phantom power and control LEDs Fig. 2.11: CD/Tape input/output - Behringer XENYX 802 | User Manual - Page 8
the balanced inputs/outputs. To do this, use either mono plugs or stereo plugs with the ring and sleeve bridged (pins 1 and 3 in the case of XLR connectors). ++ Caution! Never use unbalanced XLR connectors (PIN 1 and 3 connected) on the MIC input connectors when using the phantom power supply. Fig - Behringer XENYX 802 | User Manual - Page 9
+22 dBu Equalizer EQ mono channels LOW MID HIGH EQ stereo channels LOW MID HIGH 80 Hz / ±15 dB 2.5 kHz / ±15 dB 12 kHz / ±15 dB 80 Hz / ±15 dB 2.5 kHz / ±15 dB 12 kHz / ±15 dB Send / Return Aux sends Type Impedance Max. output level Stereo aux returns Type Impedance Max. input level ¼" TS jack - Behringer XENYX 802 | User Manual - Page 10
for repair or replacement under the terms of this warranty will be repaired or replaced. 2. If the product needs to be modified or adapted in order to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals. == connection or operation of the unit in any way - Behringer XENYX 802 | User Manual - Page 11
/1202 Responsible party name: Address: Phone/Fax No.: BEHRINGER USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +1 425 672 0816, Fax: +1 425 673 7647 hereby declares that the product(s) XENYX 502 XENYX 802 XENYX 1002 XENYX 1202 complies/comply with the FCC rules as
XENYX
502/802/1002/1202
User Manual
A50-57613-00003