Behringer XENYX X1222USB Manual
Behringer XENYX X1222USB Manual
 |
View all Behringer XENYX X1222USB manuals
Add to My Manuals
Save this manual to your list of manuals |
Behringer XENYX X1222USB manual content summary:
- Behringer XENYX X1222USB | Manual - Page 1
User Manual X1222 Premium 16-Input 2/2-Bus Mixer with XENYX Mic Preamps & Compressors, British EQs, 24-Bit Multi-FX Processor and USB/Audio Interface - Behringer XENYX X1222USB | Manual - Page 2
Digital effects processor 12 3.2 XPQ surround function 13 4. Installation 13 4.1 Rack mounting 13 4.2 Cable connections 13 5. Specifications 14 Thank you Congratulations! In purchasing the BEHRINGER XENYX you have acquired a mixer whose small size belies its incredible versatility and audio - Behringer XENYX X1222USB | Manual - Page 3
3 XENYX X1222USB User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" - Behringer XENYX X1222USB | Manual - Page 4
4 XENYX X1222USB User Manual "Support"at behringer.com. If your country is not listed, please check if your problem can be dealt with by our"Online Support"which may also be found under "Support"at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE - Behringer XENYX X1222USB | Manual - Page 5
the mixer input to a higher signal level that is less prone to interference. This higher, interference-safe signal level has to be achieved through amplification using an amplifier of the highest quality in order to amplify the signal and add as little noise to it as possible. The XENYX Mic Preamp - Behringer XENYX X1222USB | Manual - Page 6
can be found in the support area of our website (behringer.com). Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation! MIC Each mono input channel offers a balanced microphone input via the XLR connector and - Behringer XENYX X1222USB | Manual - Page 7
7 XENYX X1222USB User Manual LOW CUT The mono channels of the mixing consoles have a high-slope LOW CUT filter for eliminating unwanted, low-frequency signal components (80 Hz, 18 dB/octave). 2.1.3 Aux sends (MON and FX) GAIN Use the GAIN control to adjust the input gain. This control should - Behringer XENYX X1222USB | Manual - Page 8
XENYX X1222USB User Manual PAN The PAN control determines the position of the channel channel's signal to the effects processor! 2.2 Stereo channels 2.2.1 Channel inputs All stereo channel strips have a GAIN control for level setting. In those channels in which a mic input is present in the channel - Behringer XENYX X1222USB | Manual - Page 9
9 XENYX X1222USB User Manual MON SEND The aux send control MON SEND acts as master control for the monitor bus and determines the level of the summed signal that is taken from the mixer via the MON SEND connector and that can for example be fed to an amplifier for monitor purposes. Using the audio - Behringer XENYX X1222USB | Manual - Page 10
device. If you wish to use your mixer solely for recording purposes, the main outputs are also an alternative. 2.3.5 Main mix, main out connectors and headphone connector STANDBY If the STANDBY switch is pressed, all input channels with a mic connector (XLR connector) are muted. During breaks - Behringer XENYX X1222USB | Manual - Page 11
. A recording level of 0 dB is recommended for all signal types. 2.3.7 USB input/output 2.3.6 Level meter and level setting Fig. 2.15: USB input/output The XENYX mixer line has built-in USB connectivity, allowing stereo signals to be sent to and from the mixer and a computer. The audio sent from - Behringer XENYX X1222USB | Manual - Page 12
12 XENYX X1222USB User Manual ensure that the plug is easily accessible. If mounting in a rack, ensure that the mains can be easily disconnected by a plug control, you mix the channel signal (dry) and the effect signal. This also goes for mixing effects signals with the monitor mix. The main - Behringer XENYX X1222USB | Manual - Page 13
overheating. ◊ Only use the screws holding the mixing console side panels to fasten the 19" rack mounts. Balanced use with XLR connectors 21 3 input 1 = ground/shield 2 = hot (+ve) 3 = cold (-ve) 12 3 output For unbalanced use, pin 1 and pin 3 have to be bridged Fig. 4.2: XLR connections Unbalanced - Behringer XENYX X1222USB | Manual - Page 14
XENYX X1222USB User Manual Inputs Microphone Inputs (XENYX Mic Preamp) Type XLR, electronically balanced, discrete input circuitry Mic +10 to +60 dB Max. input level +12 dBu @ +10 dB Gain Impedance fader closed Channel muted Channel fader muted Frequency Response Microphone input to main out - Behringer XENYX X1222USB | Manual - Page 15
15 XENYX X1222USB User Manual Channels 9/10, 11/12 Stereo line inputs Type Impedance Gain range Max. input level CD/Tape In Type Impedance Max. input level EQ Mono Channels Low Mid High Low cut EQ Stereo Channels Low Mid High MON/FX Send Type Impedance Max. output level Aux Returns Type Impedance - Behringer XENYX X1222USB | Manual - Page 16
16 XENYX X1222USB User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION XENYX X1222USB Responsible Party Name: Address: Phone/Fax No.: MUSIC Group Services US Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +1 425 672 0816 Fax: +1 425 673 7647 XENYX - Behringer XENYX X1222USB | Manual - Page 17
We Hear You
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
 |
 |
User Manual
X1222
Premium 16-Input 2/2-Bus Mixer with XENYX Mic Preamps
& Compressors, British EQs, 24-Bit Multi-FX Processor and
USB/Audio Interface