Beko WMI71641 User Manual
Beko WMI71641 Manual
 |
View all Beko WMI71641 manuals
Add to My Manuals
Save this manual to your list of manuals |
Beko WMI71641 manual content summary:
- Beko WMI71641 | User Manual - Page 1
Automatic Fully Integrated Washing Machine WMI 71641 WMI 71441 - Beko WMI71641 | User Manual - Page 2
manual will... ...help you use your machine in a fast and safe way. • Please read the Operation Manual before installing and starting your machine. • Particularly follow the instructions related to safety. • Keep this Operating Manual your part to protect the environment. 2820521336_EN/310810.1050 - Beko WMI71641 | User Manual - Page 3
26 Detergent Drawer 26 The loading door and the drum 26 Body and control panel 26 Inlet water filters 26 Draining any remaining water and cleaning the pump filter 27 8 Solution suggestions for problems 29 9 Guarantee 35 10 Service 36 5 Selecting a Program and Operating Your Machine 11 - Beko WMI71641 | User Manual - Page 4
1 Your Washing Machine Overview 1 2 3 4 5 6 1 - Detergent Drawer 2 - Door 3 - Top Lid 4 - Control Panel 5 - Filter Cap 6 - Height-adjustable feet 4 EN - Beko WMI71641 | User Manual - Page 5
(cm) Net Weight (±4 kg) Electricity (V/Hz.) Total Current (A) Total Power (W) Spinning cycle (rpm max.) WMI71641 7 84 60 54 73 230 V / 50Hz 10 2200 1600 WMI71441 7 84 60 54 . Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the - Beko WMI71641 | User Manual - Page 6
electrical parts to overheat. This may cause problems with your washing machine. • If the power cable or mains plug is damaged you must call Authorised Service for repair. • Check water hoses for wear. Do not use old/used water inlet hoses. These may cause stains on your laundry. • Fit the drain - Beko WMI71641 | User Manual - Page 7
remove the filter while there is still water in the drum. Otherwise, there may be the risk of flooding and possible injury due to the hot water. • Never force open the locked door! The door will be ready to open just a few minutes after the washing cycle comes to an end. • Unplug the machine when it - Beko WMI71641 | User Manual - Page 8
used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any - Beko WMI71641 | User Manual - Page 9
the machine on a firm surface; do not position it on a long pile rug or such like surfaces. Raising the appliance In order to raise the appliance to eliminate the gap below the worktop, you will need to order special optional kit. Please call Beko Spare Part Department. (0845 6004911) and see built - Beko WMI71641 | User Manual - Page 10
filter must be attached to the tap and the elbowed end must be attached to the machine. Tighten the nuts of the hose well by hand; never use wrenches to tighten the nuts. • Open maintenance or cleaning, care should be taken not to fold, squeeze or block the hoses. Connecting to the drain The water - Beko WMI71641 | User Manual - Page 11
hose Before disposing of your old washing must not be longer than 3.2 m after machine, cut off the mains plug and make coming out of the machine. To avoid the door lock unusable. water leakage failures, the connection between the extension hose and the drain hose of the product must be fitted - Beko WMI71641 | User Manual - Page 12
Wash "machine washable" or "hand washable" labeled products only with an appropriate Programme. • Do not wash colours and whites Bleach can be Do not use Dry-cleanable Do not used bleach dry-clean machine wash. Always follow the instructions on the packaging. • Wash parts of the machine in - Beko WMI71641 | User Manual - Page 13
into the drum. Always use the detergent drawer. Do not close the drawer too fast after putting the laundry additives. This may cause the additives to be dispensed early, creating unsatisfactory washing results and fabric damage. C Do not open the drawer during washing Programme. The detergent drawer - Beko WMI71641 | User Manual - Page 14
the dyestuff into the softener compartment as instructed on the package. • Never use fabric softener and starch together in the same washing cycle. • Wipe the inside of the drum after using starch. Bleaches If you are going to use regular bleach in your machine, it is suggested to select a Programme - Beko WMI71641 | User Manual - Page 15
it must be added from the compartment number "II" right after the detergent foams with water. Eliminating lime formation • When required, use only appropriate lime removers developed specifically for washing machines and always follow the instructions on the package. 15 EN - Beko WMI71641 | User Manual - Page 16
5 Selecting a Program and Operating Your Machine Control panel 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 - Spin Speed Adjustment Button Display Temperature Adjustment Button Program Selection Knob On/Off Button Time Delaying Button (+/-) Auxiliary Function Buttons Start/Pause/Cancel Button 16 EN - Beko WMI71641 | User Manual - Page 17
not be put in the pre-wash compartment. Less detergent should be put in the main wash compartment as loose knit fabrics (lace) foam too much due to its meshed structure. • Woollens You can wash your machine-washable woollen garments on this program. Wash by selecting the proper temperature according - Beko WMI71641 | User Manual - Page 18
before starting the program. For more effective cleaning, you can run the program by adding powder lime remover for washing machines into compartment II of the detergent drawer. After the program is completed, leave the door ajar to allow the inside of the machine get dry. C This is not a program - Beko WMI71641 | User Manual - Page 19
after the cycle, you may use rinse hold function in order to prevent your clothes becoming creased when there is no water in the machine. With button. Program resumes. Your machine drains the water and spins your laundry. You can use no spin function in order to drain the water without spinning at - Beko WMI71641 | User Manual - Page 20
0.20 1400 • • Woollens 40 1.5 56 0.30 1000 • • Hand Wash 30 1 40 0.25 1000 Dark Care 40 3 82 0.55 1000 * • Self Clean 70 - 100 1.70 800 * Freshen up - 2 20 0.03 1000 in the table vary according to the model of your machine. CC Water and power consumption and program duration differ - Beko WMI71641 | User Manual - Page 21
wash you save energy, water, detergent and time. • Pre-wash without detergent is recommended for lace and curtains. • Quick Wash With this function (b), the wash drum movement will be lessened to prevent creasing and spinning speed is limited. In addition, washing . Your machine drains the water - Beko WMI71641 | User Manual - Page 22
delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes. 1. Open the loading door, place the laundry inside and fill detergent drawer. 2. Set the washing program, temperature, spin speed and, if required, select the auxiliary functions. 3. Press "Time delaying" buttons - Beko WMI71641 | User Manual - Page 23
Standby symbol which indicates the machine is in standby mode lights up and the start symbol that shows the program has started and is still continuing fades out. the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. This symbol - Beko WMI71641 | User Manual - Page 24
the flashing Spin Symbol and the lit up Standby Symbol. If you wish to spin when the machine is in this mode: Adjust the spin speed. Press "Start/Pause/ Cancel" button. The program continues, pumps out the water and spins. The Standby Symbol fades out and Start Symbol lights up. If you - Beko WMI71641 | User Manual - Page 25
. 1. Open the loading door and take out the laundry when the door locked symbol on the display fades out. 2. Press the "On/Off" button. 3. Turn the water tap off. 4. Remove any folds in the rubber seal on the loading door and check for debris. 5. Leave the loading door and detergent drawer open to - Beko WMI71641 | User Manual - Page 26
avoid touching the residues in the drawer when cleaning. 3. Replace the drawer into its housing after cleaning. Check if the siphon is in its original location. The loading door and the drum After each wash: • Check if there are any foreign substances in the drum. • Open the hole in the bellow with - Beko WMI71641 | User Manual - Page 27
of the washing water. Thus, a good water discharge is achieved and the pump life is extended. • If your machine fails to drain the water, the pump filter may be clogged. You may have to clean it every 2 years or whenever it is plugged. Water must be drained off to clean the pump filter. In addition - Beko WMI71641 | User Manual - Page 28
and pushing the upper part of it. If your product is not supplied with an emergency drain hose, do the following as shown in the figure below: • Place a large container in front of the filter to receive water flowing from the filter. • Loosen pump filter (anticlockwise) until water starts - Beko WMI71641 | User Manual - Page 29
from the bottom of the machine. - Make sure that the seals of the water inlet hoses There might be problems with hoses or the pump filter. are securely fitted. - Tightly attach the drain hose to the tap. - Make sure that the pump filter is completely closed. Machine does not fill with water - Beko WMI71641 | User Manual - Page 30
might be above the lower level of the door. - Machine might be heating up the water or it may be at the spinning cycle. - Due to an electrical mechanism, the door can only be opened a few minutes after the Programme has stopped. - Run either the "Pump" or "Spin" Programme. - Wait until the process - Beko WMI71641 | User Manual - Page 31
is not evenly distributed in the drum to prevent any damage to the machine and to its environment. - Check the filter. - Check the drain hose. Washing performance is poor: Laundry turns grey - Using insufficient amount of detergent for a long time, - Washing at low temperatures for a long time - Beko WMI71641 | User Manual - Page 32
accumulations on the drum may have stuck to the laundry. - Such odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/or in short Programmes. - Leave the detergent dispenser drawer as well as the loading door of the machine ajar after each - Beko WMI71641 | User Manual - Page 33
compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Do not mix the softener with detergent when putting in the compartment. Wash and clean the drawer with hot water. Detergent residue in the dispensing drawer. - Detergent may have - Beko WMI71641 | User Manual - Page 34
start after the program was selected and the «Start/Pause/Cancel» button was pressed. The front door may be ajar. The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the model of your machine, water cut-off symbol may light up too) Water may have been cut off. You - Beko WMI71641 | User Manual - Page 35
qualified Electrical Domestic Appliance Installer is recommended for all Washing Machines, Dishwashers and Electric Cookers • Gas Cookers must service please contact the Beko Customer Help-Line. Tel: 0845 600 4911 e-mail:[email protected] Important notes. • Your Beko product is designed and built - Beko WMI71641 | User Manual - Page 36
& Dishwashers 0845 600 4906 Republic of Ireland All Refrigeration, 01 862 3411 All Cookers Washing Machines & Dishwashers Before requesting service please check the trouble-shooting guide in the Operating Instructions as a charge may be levied where no fault is found even though your product may - Beko WMI71641 | User Manual - Page 37
BUILT-IN INSTALLATION GUIDE 11 BUILT-IN INSTALLATION 540,8 mm 590,7 mm 820 mm 810,6 mm 600 mm 580 mm 10,4 mm 150,3 mm 51 mm - Beko WMI71641 | User Manual - Page 38
- Beko WMI71641 | User Manual - Page 39
338 mm 26mm 190 mm 26mm 590 mm / 595 mm 573.5 mm 21mm 36 mm 338 mm 190 mm 338 681 mm mm 36 mm 172 mm 534.5 mm - Beko WMI71641 | User Manual - Page 40
172 mm 681 mm 338 mm 36 mm 534.5 mm 190 mm 36 mm 338 mm 590 mm / 595 mm 573.5 mm 21 mm 190 mm 338 mm 26 mm 26 mm - Beko WMI71641 | User Manual - Page 41
IF THE CABINET DOOR OPENS TO RIGHT Use 35mm hinge cutting tool IF THE CABINET DOOR OPENS TO LEFT - Beko WMI71641 | User Manual - Page 42
- Beko WMI71641 | User Manual - Page 43
1 3 2 4 - Beko WMI71641 | User Manual - Page 44
- Beko WMI71641 | User Manual - Page 45
±2mm ±2mm ±2mm ±2mm - Beko WMI71641 | User Manual - Page 46
820mm To increase height of product order optional part no: 1493 - Beko WMI71641 | User Manual - Page 47
- Beko WMI71641 | User Manual - Page 48
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
WMI 71641
WMI 71441
Automatic
Fully Integrated
Washing Machine