Belkin F1DG102W Installation Instructions

System Requirements

Monitor

Flip supports any monitor with a VGA connection. You can also use

your DVI-I monitor with Flip by connecting a VGA adapter to the DVI

cable. Flip does not support direct DVI connections from monitors.

Keyboard/Mouse

Flip supports any keyboard and mouse with a USB connection.

Computers

Flip can be used with any PC or Mac

®

desktop or notebook computer

that supports USB keyboard and mouse connections, and that runs on

one of these operating systems:

• Windows

®

2000, XP, 2003, or Vista

TM

• Mac OS

®

X v10.0 and above

• Linux

®

Package Contents

• Wireless Remote

• KVM Switch with Cables

• Audio Extension Cable

• Battery

Introduction

Congratulations and thank you for purchasing Flip Wireless KVM Switch.

Flip is easy to set up and use, and comes with everything you need to

share one monitor, keyboard, mouse, and one set of speakers between

your two computers. No additional cables or software are required.

The diagram below shows a typical Flip Wireless setup. The wireless

remote sits on your desk. Your monitor, keyboard, mouse, and

speakers plug into the KVM switch, and the KVM switch connects to

your two computers.

Installing your Flip

Before you begin, make sure that your USB keyboard and mouse work

properly with both computers.

1.

Power on your computers.

2.

Connect your monitor, keyboard, mouse, and speakers to the KVM

switch. Insert the battery into the wireless remote (positive side

facing out), and place the remote on your desk within 10 feet of the

KVM switch.

3.

Connect one set of cables to the monitor, USB, and speaker ports

on your first computer. Wait for your computer to recognize the

new USB device (Flip). Then connect the other set of cables to the

monitor, USB, and speaker ports on your second computer. If the

cable is not long enough to connect to your speaker port, use the

included audio extension cable.

You are now ready to use your Flip.

Flip Tip:

Use the included fastener strip to attach

the remote to your monitor, keyboard,

desk, or other item.

Flip Tip:

Keep the KVM switch behind your

computers to keep your desk free of

cable clutter.

Package Contents/Introduction

1

System Requirements

2


3


4

Using your Flip

When you power up your computers, your first computer’s desktop

will appear on your monitor. You are now ready to use that computer

as if it were directly connected to your monitor, keyboard, mouse,

and speakers.

To switch access to your other computer, simply press the remote.

Your other computer’s desktop will appear on your monitor. You are

now ready to use your other computer as if it were directly connected

to your monitor, keyboard, mouse, and speakers. Press the remote

each time you want to switch access from one computer to the other.

Optional Software

You can install software onto your computers that will allow you to

flip between computers using a desktop icon or keyboard hot-key

sequence. The software will also allow you to listen to music files

on one computer while you work on the other. To download the free

software, please visit our website at www.belkin.com/flip.

The software can be used with computers that run on one of these

operating systems:

• Windows 2000, XP, 2003, or Vista

• Mac OS X v10.3 and above

Note:

For a list of frequently asked questions and troubleshooting

tips, please visit our website at www.belkin.com/flip.

Using your Flip

5

USB connection

VGA connection

Belkin F1DG102W Installation Instructions

Belkin F1DG102W - Flip Wireless KVM Manual

Belkin F1DG102W manual content summary: