Belkin F1DM208T User Manual
Belkin F1DM208T Manual
 |
View all Belkin F1DM208T manuals
Add to My Manuals
Save this manual to your list of manuals |
Belkin F1DM208T manual content summary:
- Belkin F1DM208T | User Manual - Page 1
OmniView™ MATRIX2 Series KVM Switch User Manual F1DM208T F1DM216T MATRIX2 Series 13 - Belkin F1DM208T | User Manual - Page 2
Port Selectors 17 Selecting a Computer Using Keyboard Hot Key Commands . . . . 19 AutoScan Mode 21 Belkin KVM Switches and Accessories OmniView KVM Switches 27 OmniView All-in-One KVM Cables 29 OmniView Accessories and Adapters 31 MATRIX2 Series FAQs 32 Troubleshooting 34 Information 37 - Belkin F1DM208T | User Manual - Page 3
soon see for yourself why over 1 million Belkin OmniView products are being used worldwide. Package Contents • OmniView MATRIX2 Series KVM Switch • Adjustable Rack-mount Brackets with Screws • DB25-to-RJ45 Parallel Flash Cable • User Manual • Quick Installation Guide • 12-Volt DC, 1-Amp power supply - Belkin F1DM208T | User Manual - Page 4
your MATRIX2. This enables your MATRIX2 to maintain consistent compatibility with the latest devices and computers. Firmware upgrades are free for the life of your MATRIX2. Refer to the enclosed flash upgrade instruction document or visit us at belkin.com for complete upgrade information and support - Belkin F1DM208T | User Manual - Page 5
and setting the time interval for the AutoScan function. Direct-Access Port Selector: Direct-access port selectors, located conveniently on the front face of the MATRIX2, allow for simple, manual port-selection. Each button controls a port. LED Display: An LED display on the face of the - Belkin F1DM208T | User Manual - Page 6
connect to the MATRIX2, an OmniView All-in-One MATRIX Series KVM Cable is necessary. Video resolution support of up to 2048x1536@85Hz requires use of a 75-Ohm, coaxial VGA cable to preserve signal integrity. VGA cables must have HDDB15 female-toHDDB15 male connectors. Belkin highly recommends that - Belkin F1DM208T | User Manual - Page 7
• Mac® (with USB support) • Sun (with USB support) Keyboards: • Supports 101-/102-/104-key keyboards Mice: • Microsoft® software-compatible PS/2 or PS/2 & USB combo mice (with PS/2 adapter) having 2, 3, 4, or 5 buttons • Microsoft software-compatible PS/2 wireless or optical mice Monitor: • VGA - Belkin F1DM208T | User Manual - Page 8
BANK scroll buttons Console A direct-access port selector Console B direct-access port selector Console B Manual BANK scroll buttons Back View of the MATRIX2 BANK DIP switch (may be located on the side in some models) Console B VGA Daisy-chain Input port and PS/2 connections Console A VGA - Belkin F1DM208T | User Manual - Page 9
OVERVIEW SPECIFICATIONS Part No.: F1DM208T, F1DM216T Power: 12-Volt DC, 1-Amp power adapter with center-pin positive polarity Daisy-Chain: Maximum of 16 KVM Switches Computer Connections Supported: 8 (F1DM208T); 16 (F1DM216T) Keyboard Emulation: PS/2 Mouse Emulation: PS/2 Monitors Supported: VGA, - Belkin F1DM208T | User Manual - Page 10
: If you need your Console to reside further than 25 feet from the MATRIX2, we recommend using the Belkin CAT5 Extender (F1D084) with a standard CAT5 UTP cable. By using this device, you may increase the distance between your MATRIX2 and your PS/2 keyboard, PS/2 mouse, and monitor by as much as 500 - Belkin F1DM208T | User Manual - Page 11
-chained to another MATRIX2, set the BANK address prior to installing on a rack. Refer to the section in this User Manual labeled "Connecting Multiple MATRIX2s (Daisy-Chaining)" (page 12). Your MATRIX2 is now mounted securely into the bracket and you are now ready to connect cables to it at the - Belkin F1DM208T | User Manual - Page 12
INSTALLATION This section provides complete instructions for the hardware setup of a single MATRIX2 (F1DM208T, F1DM216T). PS/2 Installation: Keyboard, Video, and Mouse Connections Connect the Console: 1. Connect the first monitor to the MATRIX2. Attach your monitor cable to the HDDB15 female port - Belkin F1DM208T | User Manual - Page 13
for ports 01 through 08 (16 for F1DM216T). The corresponding LED should flash as each button is pressed, indicating that the port is ready for connecting your servers. Connect the Computer: PS/2 Installation: 1. Using an OmniView MATRIX2 KVM Cable (Belkin part# F1D9300-XX), plug the male 25 - Belkin F1DM208T | User Manual - Page 14
: A MATRIX Series daisy-chain cable (F1D9302-XX) is required to daisy-chain each MATRIX2 and is available through your Belkin reseller or online at belkin.com. All MATRIX2s feature a "BANK DIP" switch. The BANK DIP switch is used for proper identification and use of OmniView KVM Switches in a single - Belkin F1DM208T | User Manual - Page 15
ON OFF OFF OFF BANK 14 Secondary ON ON OFF OFF OFF OFF BANK 15 Secondary Note: "ON" is the down position. Example: Four 8-Port MATRIX2s (F1DM208T) are daisy-chained together for controlling up to 32 computers. The DIP switch on the Primary switch is set to "BANK address 00" (factory - Belkin F1DM208T | User Manual - Page 16
ports of the Primary switch (BANK 00), as described previously in this installation guide. Connecting the Primary Switch to First Secondary Switch: 4. Using the MATRIX2 daisy-chain cable (F1D9302-XX), connect one end of the cable to the "Input" port on the Primary switch (BANK 00). 5. Connect the - Belkin F1DM208T | User Manual - Page 17
Refer to "Single MATRIX2 Installation" on page 10 for instructions on how to connect the Console and the computers to the MATRIX2. 10. Connect the have the correct BANK address assigned to them and that all daisy-chain cables are connected properly. 12. Verify that the Primary unit has detected - Belkin F1DM208T | User Manual - Page 18
all cables have been connected, power up the computers that are attached to the MATRIX2. All computers can be powered on simultaneously. The MATRIX2 check your cable connections for that computer and reboot. If the problem persists, please refer to the "Troubleshooting" section in this manual. 16 - Belkin F1DM208T | User Manual - Page 19
A" in amber and "Console B" in green. Select connected computers either by using the direct-access port selectors located on the front panel of the MATRIX2, On-Screen Display menu, or by using hot key commands through the Console keyboard. It takes approximately two seconds for the video signal to - Belkin F1DM208T | User Manual - Page 20
Pressing the "BANK +" and "BANK -" scroll buttons on the Primary switch will allow you to switch between the daisy-chained MATRIX2s. Pressing both buttons simultaneously will reset the MATRIX2. The "BANK +" button will take you to the next BANK. For example, when you are at the Primary switch (BANK - Belkin F1DM208T | User Manual - Page 21
port by entering the two-digit number of the port you wish to access. For example, if you press "Scroll Lock", "Scroll Lock", "02", the MATRIX2 will switch to the computer on port 2 located on BANK 00. ++ Switch to BANK 00, Port 2-(02) Note: You will have approximately five seconds to - Belkin F1DM208T | User Manual - Page 22
USING YOUR MATRIX2 With daisy-chain switch configuration, you can switch between BANKs by pressing "Scroll Lock", "Scroll Lock", "Page Up", to switch to the next BANK. Press " - Belkin F1DM208T | User Manual - Page 23
no mouse or keyboard control in AutoScan mode. This is necessary to prevent data and synchronization errors. If the user is using the mouse or keyboard when the MATRIX2 is switching between ports, data flow may become interrupted and could result in erratic mouse movement and/or incorrect character - Belkin F1DM208T | User Manual - Page 24
simple keyboard key sequences. To send commands to the MATRIX2, the "Scroll Lock" key must be pressed twice within to 15) (Y=01 to 08 for F1DM208T) (X=00 to 15) (Y=01 to 16 for F1DM216T) Reset OSD to factory default Disable sound in AutoScan mode Activate On-Screen Display Enable AutoScan mode - Belkin F1DM208T | User Manual - Page 25
menu, press "Scroll Lock", "Scroll Lock", and the space bar. Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the MATRIX2, and does not affect your computers or software function in any way. The main OSD menu is shown (on the right). It shows the current - Belkin F1DM208T | User Manual - Page 26
the firmware on your MATRIX2. Cautions and Warnings: We strongly recommend that you update your firmware only if you are currently experiencing mouse and keyboard problems with your MATRIX2, as reconfiguring software may lead to unexpected operational problems. Please contact Belkin Tech Support if - Belkin F1DM208T | User Manual - Page 27
, and mouse to the computer you prepared for firmware update. It must run Windows 95, 98, or Me. 2. Connect the power adapter to the MATRIX2. Be sure that all connected computers are powered off at this moment. 3. Connect the custom flash cable (DB25 Male-to-RJ45; included with purchase). Connect - Belkin F1DM208T | User Manual - Page 28
. Make sure that the appropriate Flash DIP switch is set to the "ON" position. Only one firmware can be "flashed" at one time. 2. After the flash update has been completed, unplug the power supply from the MATRIX2. 3. Set all DIP switches to the "OFF" position. 4. You are now ready to use your - Belkin F1DM208T | User Manual - Page 29
and provides a simple, reliable solution at a lower price point. The OmniView E Series KVM Switch supports high-quality resolution of up to 2048x1536@85Hz through a 400MHz bandwidth when used with coaxial VGA cabling. This means that Belkin OmniView products offer the highest resolution without - Belkin F1DM208T | User Manual - Page 30
cables for easy installation; includes a 12-Volt DC, 1-Amp power supply; and is backed by a Belkin Five-Year Warranty. F1DA104T PRO2 Series 4-Port KVM Switch PS/2 & USB F1DA108T PRO2 Series 8-Port KVM Switch PS/2 & USB F1DA116T PRO2 Series 16-Port KVM Switch PS/2 & USB OmniView MATRIX2 Series - Belkin F1DM208T | User Manual - Page 31
DC, 1-Amp power supply; and is backed by a Belkin Five-Year Warranty. F1DM208T MATRIX2 Series 8-Port KVM Switch PS/2 & USB F1DM216T MATRIX2 Series 16-Port KVM Switch PS/2 & USB OMNIVIEW ALL-IN-ONE KVM CABLES OmniView All-In-One KVM Cables provide you with the quality connections necessary to set up - Belkin F1DM208T | User Manual - Page 32
BELKIN KVM SWITCHES AND ACCESSORIES protection against RFI and EMI; strain-relief construction on both ends of the cables; and a ferrite bead for noise The Gold Series includes a custom 15-pin, coaxial VGA cable to support image clarity for the highest-resolution applications, and is available in - Belkin F1DM208T | User Manual - Page 33
/2 mice or trackballs without swapping cables or rebooting the computer. F1D201-The OmniView 2-Port Reverse KVM Switch gives two users central control of one PC from two sets of keyboards, monitors, and mice. F2N017-The OmniView PRO Series AT-to-PS/2 Keyboard Adapter allows you to connect a keyboard - Belkin F1DM208T | User Manual - Page 34
systems does the MATRIX2 support? A: The MATRIX2 will support any operating system that runs on a PS/2 and USB platform. It will also work with non-USB Sun and Mac operating systems using the appropriate adapters (OmniView PS/2 Sun Adapter [F1D082], OmniView PS/2 Mac Adapter [F1D080]). Operating - Belkin F1DM208T | User Manual - Page 35
works with all Linux kernels configured for USB support. Q: How long is the warranty for the MATRIX2? A: The MATRIX2 comes with a five-year limited warranty. Q: Can I daisy-chain my MATRIX2 with a Belkin PRO2 or MATRIX2 Series KVM Switch? A: No, the MATRIX2 cannot be daisy-chained to the PRO2 and - Belkin F1DM208T | User Manual - Page 36
are having trouble with to see if the problem still appears. I am getting a black screen on my monitor. • Check that all video cables are inserted properly. • If you are not using a power adapter, check that the keyboard cable is connected and inserted properly between the computer and MATRIX2 for - Belkin F1DM208T | User Manual - Page 37
TROUBLESHOOTING Keyboard The computer does not detect a keyboard and I get a keyboard error reported at boot up. • Check that the keyboard cable between the MATRIX2 Microsoft mouse driver. • Disconnect and reconnect the mouse cable attached to the channel with which you are experiencing problems to - Belkin F1DM208T | User Manual - Page 38
TROUBLESHOOTING The computer boots up, but the mouse does not work. • Make sure the and mouse do not work. • Prior to connecting the USB MATRIX2, make sure that the HID USB driver is installed on each computer. (To install the HID USB driver, connect a USB mouse and USB keyboard to the computer. - Belkin F1DM208T | User Manual - Page 39
of Conformity We, Belkin Components, declare under our sole responsibility that the F1DM208T and F1DM216T to which this declaration OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES - Belkin F1DM208T | User Manual - Page 40
Components, Ltd. Unit 13 • Gatelodge Close • Round Spinney Northampton • Northants • NN3 8RX • United Kingdom Tel: +44 (0) 1604678300 Fax: +44 (0) 1604678330 Belkin Components B.V. Starparc Building • Boeing Avenue 333 1119 PH Schiphol-Rijk • The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
13
™
OmniView
MATRIX2 Series KVM Switch
MATRIX2 Series
User Manual
F1DM208T
F1DM216T