Belkin F1DP116S User Manual

Belkin F1DP116S Manual

Get Belkin F1DP116S PDF manuals and user guides View all Belkin F1DP116S manuals
Add to My Manuals
Save this manual to your list of manuals

Belkin F1DP116S manual content summary:

  • Belkin F1DP116S | User Manual - Page 1
    OmniView® Serial Console Server User Manual F1DP116S
  • Belkin F1DP116S | User Manual - Page 2
    4 LED Indicators, Button, and Connectors 5 Specifications 6 Local Installation 7 Desktop or Rack-Mounting 8 Connecting the Target Devices to the Console Server 9 Network Configuration 10 Web-Browser Interface 10 Assigning IP from the Console Port--VT-100 (Console, Telnet, SSH 13 Web-Browser
  • Belkin F1DP116S | User Manual - Page 3
    Introduction 1 Thank you for purchasing the Belkin OmniView Serial Console Server (Console Server). This device provides administrators secure monitoring and control of servers, routers, switches, and other serial devices from anywhere on 2 the corporate TCP/IP network, over the Internet, or
  • Belkin F1DP116S | User Manual - Page 4
    serial-console ports through in-band networks and out-of-band connectivity options, such as serial terminal access and dial-up modem. • Manage network devices/servers centrally, remotely, and securely Reliable console servers, as well as other serially managed devices such as router Console Server's
  • Belkin F1DP116S | User Manual - Page 5
    activity (one LED per port) ON: in use (successful port log-in) Blinking: traffic activity on the serial port 6 7 • RESET button: Quickly press and release the button to reboot the Console Server. Press and hold the "Reset" button for more than five seconds to set the unit to its default
  • Belkin F1DP116S | User Manual - Page 6
    , or Category 6 Patch Cables for your Console Server to help ensure the signal integrity. 8 Belkin UTP Patch Cables: A3L791-XX-YYY (CAT5e) A3L850-XX-YYY (FastCAT™ 5e) A3L980-XX-YYY (CAT6) Refer to Appendix B on page 54 for pin-out guide. Belkin Serial Adapter: F1D120 (RJ45F - DB9F DTE) F1D121
  • Belkin F1DP116S | User Manual - Page 7
    installation process, so it is highly recommended that you record these numbers below before mounting the Console Server to your rack. MAC Address Serial Number The Console Server includes adjustable mounting brackets ideal for installation in 19-inch racks. The mounting brackets feature three
  • Belkin F1DP116S | User Manual - Page 8
    can configure all features through the Web. Initial Settings The following section provides instructions for setting the IP address for the OmniView Serial Console Server. Step 1 Identifying the IP Address Once your Console Server has been connected to your network and is powered up, a Dynamic Host
  • Belkin F1DP116S | User Manual - Page 9
    view or change the settings (IP address, subnet mask, etc.). 1. Connect the console port on the rear panel to a serial port on a PC host 4 using the CAT5 cable and the local console port RJ45/DB9F adapter, included with the Belkin Console Server. 5 2. Configure a terminal emulation program
  • Belkin F1DP116S | User Manual - Page 10
    SPACE bar to select Static mode or DHCP mode. 2. For IP Address, Subnet Mask, Default Gateway, Primary DNS, and 2 Secondary DNS - You can change these network settings. 3. After changing the settings and the final enter, the Console Server will 3 prompt you to confirm YES or NO. If YES, the
  • Belkin F1DP116S | User Manual - Page 11
    Management Interface The Console Server supports both HTTP and HTTPS (HTTP over SSL) protocols. Users must authenticate themselves by logging in to the system with a correct user name and password. To access the Console Server's web-management pages, enter the unit's IP address or resolvable host
  • Belkin F1DP116S | User Manual - Page 12
    through the web interface. IP Configuration The Console Server requires a valid IP address to operate within the user's network environment. If the IP address is not readily available, contact the system administrator to obtain a valid IP address for the Console Server. There are two types
  • Belkin F1DP116S | User Manual - Page 13
    services are mainly for the Console-Server configuration. Clicking "Enable/Disable" in the "Action" field will help to add/ modify the chain rule quickly without the hassle of manually -Server Configuration 7 The Console Server's web server supports both HTTP and HTTPS (HTTP over SSL) services
  • Belkin F1DP116S | User Manual - Page 14
    change. This can make it difficult to know if an IP address has changed, or what the new IP address is. Belkin Serial Console Server Ethernet Router/NAT Network Server DDNS Administrator Fig. 5 Dynamic DNS The Dynamic DNS service is provided by various ISPs and organizations to deal with
  • Belkin F1DP116S | User Manual - Page 15
    service effective, a RADIUS server must be installed prior use. HTTPS/SSL The Console Server supports both HTTP and HTTPS (HTTP over SSL) services password. The Console Server supports various authentication options, such as "Local" and "RADIUS", to authenticate the users who access the serial port.
  • Belkin F1DP116S | User Manual - Page 16
    you connect to the TCP socket, you have access to the device attached to the serial port as if the device were connected directly to the network. Data streams can be sent back and forth between the device and the telnet/SSH client program. RawTCP is also supported with the console-server mode. 27
  • Belkin F1DP116S | User Manual - Page 17
    following parameters are configurable in console-server mode: Listening TCP Port Number You can also access a serial port through the IP address of the Console Server and the listening TCP port number of the serial port. If the IP address of the Console Server and the serial port are assigned as 192
  • Belkin F1DP116S | User Manual - Page 18
    through a Java applet. A Java applet is used to provide the text-based user interface to access the serial port. This Java applet supports only telnet in console-server mode. The user cannot access the serial port via the Web when the host mode of the port is set to a RawTCP connection. The user
  • Belkin F1DP116S | User Manual - Page 19
    support option and also check your Java Runtime Environment version (known as JRE version). You will need version 1.6.0 or above if you also need secure HTTP service Java Applet 1. Select the telnet protocol under "Serial > Configuration > Operation mode". Serial Ports 1 2 3 4 5 6 7 2.
  • Belkin F1DP116S | User Manual - Page 20
    an external terminal converter, like the Belkin F1D084E, to connect your Console Server to a KVM switch and consolidate the control. Installation To install, connect your terminal device to port 16 of the Console Server. This will allow you to access a serial device connected to ports 1 through 15
  • Belkin F1DP116S | User Manual - Page 21
    to the setting change on the VT-100 console. Click "Cancel" to refresh the values. System Status and Log System Status 1 The "System Status" page lists current system information such as name, serial number, firmware versions, MAC address, current time, and the network settings. Data cannot
  • Belkin F1DP116S | User Manual - Page 22
    , login account authentication) ii) SNTP (network time synchronization) iii) LOG (clear system event log) iv) PORT (serial port access authentication) v) DDNS (register dynamic IP address event) System Administration User Administration 1 At start-up, the system will prompt the user to enter the
  • Belkin F1DP116S | User Manual - Page 23
    "Remove" button System Administration Edit the Access Control list (ACL) The Console Server provides ACL (Access Control List) security where you can 1 specify user make configuration 5 changes to the authorized serial ports only. Users will not be able to view or configure the unauthorized
  • Belkin F1DP116S | User Manual - Page 24
    batteries according to the battery 4 manufacturer's instructions. 5 Firmware Upgrade 6 Firmware can be easily upgraded via a web page. This section describes the upgrade procedures. 7 The latest firmware version is available from www.belkin.com/support. Upgrade from the Web Interface 8 Refer
  • Belkin F1DP116S | User Manual - Page 25
    the firmware version and confirm the upgrade operation. SSL Certificate An SSL certificate is a digital identification that contains information to attest that the certificate belongs to a specific person, organization, server, or other entity noted in the certificate. The Console Server supports
  • Belkin F1DP116S | User Manual - Page 26
    browser (bottom-right corner of Internet 1 Explorer browser). You can double-click on the symbol to examine the detailed information of the server-side certificate. 2 Once you have prepared a publicly signed CA suite of files, upload them from the "SSL Certificate" page. A system reboot is
  • Belkin F1DP116S | User Manual - Page 27
    Reset to Factory-Default Settings 1 To roll back to factory-default settings, click on "Apply". 2 3 4 5 6 Reboot 7 You can trigger the Console Server to perform a software reboot via the network. The reboot function is mandatory when the CA-certificate upload is complete. 8 49 section
  • Belkin F1DP116S | User Manual - Page 28
    Technical Data Default Settings Server Name DHCP IP Address Net Mask Gateway Serial Number MAC Address Version and Date User Name Password Protocol (serial) Protocol (web) IP Filter Serial Ports -Baud Rate Data/Stop Parity Flow Control Serial Time-out Operation Mode TCP Port BelkinSC Enabled 192.
  • Belkin F1DP116S | User Manual - Page 29
    Appendix A: Adapters F1D122 (RJ45F-DB25M DCE) DB25 Male DCE Adapter Applications: Modems Part No: F1D122 - Single Pack Signal DSR RTS GND TxD RxD DCD CTS DTR Adapter RJ45 1 2 3 4 5 6 7 8 DB25M 6 4 5 2 3 1 5 20 F1D123 (RJ45F-DB25M DTE) DB25 Male DTE Adapter Applications: Sun SPARC, etc. Part
  • Belkin F1DP116S | User Manual - Page 30
    (Simple Mail Transfer Protocol) TCP 37 Time TCP, UDP 39 RLP (Resource Location Protocol) UDP 49 TACACS, TACACS+ UDP 53 DNS UDP 67 BOOTP server UDP 68 BOOTP client UDP 69 TFTP UDP 70 Gopher TCP 79 Finger TCP 80 HTTP TCP 110 POP3 TCP 119 NNTP (Network News Transfer
  • Belkin F1DP116S | User Manual - Page 31
    networks. Automatically assigns the IP address for a specific duration of time. CHAP IP and other network protocols over a serial link. RADIUS (Remote Authentication Dial-In User Service) An authentication and accounting protocol. Enables remote access servers to communicate with a central server
  • Belkin F1DP116S | User Manual - Page 32
    Console Server supports secure web-page configuration (aka https). There are two types of certificate files for server Name (SERVER HOST NAME) Server Admin's Email Address
  • Belkin F1DP116S | User Manual - Page 33
    and used in accordance with the instruction manual, may cause harmful interference to radio Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. Belkin reserves the right to review the damaged Belkin
  • Belkin F1DP116S | User Manual - Page 34
    the above limitations may not apply to you. IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may
  • Belkin F1DP116S | User Manual - Page 35
    OmniView® Serial Console Server Belkin Tech Support US: 800-223-5546 ext. 2263 310-898-1100 ext. 2263 UK: 0845 607 77 87 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 65 64857620 Europe: www.belkin.com/support Belkin International, Inc. 501 West Walnut Street Los Angeles, CA 90220,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
OmniView
®
Serial
Console Server
User Manual
F1DP116S