Home » Belkin Manuals » Hubs & Switches » Belkin F1DS102U-B » Manual Viewer

Belkin F1DS102U-B User Manual

Belkin F1DS102U-B - OmniView SOHO Series USB KVM Switch Manual

UPC - 722868438114

View all Belkin F1DS102U-B manuals

Add to My Manuals
Save this manual to your list of manuals

Belkin F1DS102U-B manual content summary:

Belkin F1DS102U-B | User Manual - Page 1
654 7349 Belkin Components, Ltd. 7 Bowen Crescent • West Gosford NSW 2250 • Australia Tel: +61 (0) 2 4372 8600 Fax: +61 (0) 2 4372 8603 Belkin Tech Support US: OmniView™ USB KVM Switch with Audio Control up to four computers from one USB keyboard, mouse, and monitor User Manual SOHO Series F1DS102U
Belkin F1DS102U-B | User Manual - Page 2
manual will provide details about your new Switch, from installation and operation, to troubleshooting-in the unlikely event of a problem. For easy installation, please refer to the Quick Installation Guide included with your KVM Switch. Thank you for purchasing the Belkin OmniView SOHO Series USB
Belkin F1DS102U-B | User Manual - Page 3
with the latest devices and computers. Firmware upgrades are free for the lifetime of the product. Visit belkin.com for upgrade information and support, or see the enclosed instruction document. Microphone/Audio Support The KVM Switch supports USB-type speakers and microphones and has built
Belkin F1DS102U-B | User Manual - Page 4
to the KVM Switch, one VGA cable and one USB cable is necessary. To support resolutions of up to 2048x1536@85Hz, use of a 75-Ohm coaxial VGA cable is required to preserve signal integrity. Cables must have HDDB15 female to HDDB15 male connectors. Belkin OmniView KVM Cables for SOHO Series with
Belkin F1DS102U-B | User Manual - Page 5
The back of the KVM Switch: 2nd computer VGA port-VGA 2 2nd computer USB port-USB 2 1st computer USB port-USB 1 Console USB mouse Console USB keyboard RJ45 flash port 2nd computer audio/microphone jacks 1st computer audio/microphone jacks 1st computer VGA port-VGA 1 Console audio/microphone
Belkin F1DS102U-B | User Manual - Page 6
years Note: Specifications are subject to change without notice. 8 STEP-BY-STEP INSTALLATION GUIDE This section provides complete instructions for the hardware setup of a single KVM Switch. (F1DS102U, F1DS104U) Installing the KVM Switch Base Hold the main housing with one hand and the base with the
Belkin F1DS102U-B | User Manual - Page 7
INSTALLATION GUIDE Installing the HID USB Driver Note: On some computers, you must enable USB support on your system BIOS. Please reference your computer manufacturer's manual or motherboard manual to verify that USB support is enabled. 1. Connect the 9V, 1A power adapter to the KVM Switch. 2. Boot
Belkin F1DS102U-B | User Manual - Page 8
is not required to use the KVM Switch.) STEP-BY-STEP INSTALLATION GUIDE Connecting the PCs 1. Power up the computers. Once the operating system has loaded, connect the KVM Switch and the computer using the USB cable. The operating system will automatically install the KVM Switch. 2. Shut down your
Belkin F1DS102U-B | User Manual - Page 9
on all CPUs that are attached to the KVM Switch. All computers can be powered on simultaneously. Your KVM Switch should be ready for use. 14 USING YOUR SOHO SERIES USB KVM SWITCH You can select which computer to operate by either the direct-access port selector located on the front panel of the
Belkin F1DS102U-B | User Manual - Page 10
; and a Belkin Five-Year Warranty. F1DS102P SOHO Series 2-Port KVM Switch with Audio, PS/2 F1DS104P SOHO Series 4-Port KVM Switch with Audio, PS/2 F1DS102U SOHO Series 2-Port KVM Switch with Audio, USB F1DS104U SOHO Series 4-Port KVM Switch with Audio, USB F1DS102T SOHO Series 2-Port KVM Switch with
Belkin F1DS102U-B | User Manual - Page 11
is backed by a Belkin Five-Year Warranty. F1DM208T MATRIX2 Series 8-Port KVM Switch with Dual-Console Control, PS/2 & USB F1DM216T MATRIX2 Series 16-Port KVM Switch with Dual-Console Control, PS/2 & USB 18 BELKIN KVM SWITCHES AND ACCESSORIES OmniView KVM Cables OmniView KVM Cables provide you with
Belkin F1DS102U-B | User Manual - Page 12
connectors • Gray PVC Flextec jacket Work with OmniCube, OmniView SE, PRO, MATRIX, E, SOHO, PRO2 Series, and many other KVM switches. F3X1105-XX, PS/2 Style F3X1962-XX, USB Style OmniView MATRIX Series All-In-One KVM Cables Belkin MATRIX Series Cables provide optimum connectivity between each of
Belkin F1DS102U-B | User Manual - Page 13
F1D201 - The OmniView 2-Port Reverse KVM Switch gives two users central control of one PC from two sets of keyboards, monitors, and mice. F5U119 - The Belkin PS/2-to-USB Adapter converts PS/2 keyboard and mouse signals to USB format. F1DR200 - The OmniView SOHO Series 2-Port Replacement Kit includes
Belkin F1DS102U-B | User Manual - Page 14
standard 107-key support only. Q: Does the KVM Switch support wireless mice and keyboards? A: Yes, the KVM Switch supports wireless mice and keyboards. Q: How does the KVM Switch user switch between ports? A: The KVM Switch supports two methods of port selection. The user can select computers using
Belkin F1DS102U-B | User Manual - Page 15
labeled. 26 TROUBLESHOOTING MOUSE The mouse is lost when I switch to a different port. • Check that the USB mouse you are using is connected properly to the Console of the KVM Switch. • Disconnect and reconnect the USB cable attached to the channel with which you are experiencing problems to re
Belkin F1DS102U-B | User Manual - Page 16
interference received, including interference that may cause undesired operation. CE Declaration of Conformity We, Belkin Corporation, declare under our sole responsibility that the products F1DS102U and F1DS104U, to which this declaration relates, are in conformity with Emissions Standard EN55022