Belkin F5D7233 User Manual

Belkin F5D7233 - Wireless G Travel Router Manual

Get Belkin F5D7233 - Wireless G Travel Router PDF manuals and user guides
UPC - 722868556740
View all Belkin F5D7233 manuals
Add to My Manuals
Save this manual to your list of manuals

Belkin F5D7233 manual content summary:

  • Belkin F5D7233 | User Manual - Page 1
    Wireless G Travel Router Share your hotel broadband Internet connection User Manual F5D7233
  • Belkin F5D7233 | User Manual - Page 2
    36 Securing your Wi-Fi Network 37 WEP Setup 42 Changing the Wireless Security Settings 44 WPA Setup 44 WPA/WPA2 Setup 45 Utilities Tab 52 Restarting the Router 53 Updating the Firmware 58 6. Manually Configuring Network Settings 62 7. Recommended Web Browser Settings 64 8. Using the Access
  • Belkin F5D7233 | User Manual - Page 3
    section Introduction Thank you for purchasing the Belkin Wireless G Travel Router (the 1 Router). Please be sure to read through this User Manual completely, and pay special attention to the section entitled "Placement of your Router for Optimal Performance" on page 2. 2 Advantages of a
  • Belkin F5D7233 | User Manual - Page 4
    , try moving the computer to a position between five and 10 feet away from the Router in order to see if distance is the problem. If difficulties persist even at close range, please contact Belkin Technical Support. Note: While some of the items listed below can affect network performance, they will
  • Belkin F5D7233 | User Manual - Page 5
    . • If your phone supports channel selection, change the 11 channel on the phone to the farthest channel from your wireless network. For example, change the phone to channel 1 and move your Router to channel 11. See your phone's user manual for detailed instructions. • If necessary, consider
  • Belkin F5D7233 | User Manual - Page 6
    guide for more information. These guidelines should allow you to cover the maximum possible area with your Router. Should you need to cover an even wider area, we suggest the Belkin Wireless through broadband provided by another cable or DSL service • Most online banking websites • Many commercial
  • Belkin F5D7233 | User Manual - Page 7
    section Introduction For more information regarding our networking products, visit our website 1 at www.belkin.com/networking or call Belkin Technical Support at: 2 US: 877-736-5771 310-898-1100 ext. 2263 3 Europe: 00 800 223 55 460 Australia: 1800 235 546 4 New Zealand: 0800 235 546
  • Belkin F5D7233 | User Manual - Page 8
    your new Belkin Wireless G Travel Router an ideal solution for your home or small office network. Works with PC Computers The Router supports a variety your Internet Service Provider while saving the cost of adding IP addresses to your Internet service account. SPI Firewall Your Router is equipped
  • Belkin F5D7233 | User Manual - Page 9
    Support for VPN Pass-Through 7 If you connect to your office network from home using a VPN connection, your Router will allow your VPN-equipped computer to pass through the Router the Router for connection to your Internet Service Provider (ISP). In a matter of minutes, your Wireless Router will
  • Belkin F5D7233 | User Manual - Page 10
    Product Overview MAC Address Filtering For added security, you can set up a list of MAC addresses (unique client identifiers) that are allowed access to your network. Every computer has its own MAC address. Simply enter these MAC addresses into a list using the Web-Based Advanced User Interface and
  • Belkin F5D7233 | User Manual - Page 11
    section Knowing your Router 1 Package Contents • Wireless G Travel Router 2 • Quick Installation Guide • Installation Software CD 3 • Power Supply • USB Power Cable 4 • Ethernet Cable 5 System Requirements • PC-compatible laptop 6 • Windows 98, Me, 2000, or XP 7 8 9 10 11 9
  • Belkin F5D7233 | User Manual - Page 12
    Knowing your Router Product Diagrams (C) (B) (A) Top A. Wireless LED B. Ethernet LED C. Power LED (C) (B) (A) Rear Panel A. Power Cable Port B. Ethernet Cable Port C. Mode Switch 10
  • Belkin F5D7233 | User Manual - Page 13
    section Knowing your Router Bottom A. Reset Button 1 2 3 (A) 4 5 6 7 8 9 10 11 11
  • Belkin F5D7233 | User Manual - Page 14
    Connecting and Configuring your Router The Belkin Wireless G Travel Router is a 3-in-1 solution providing the busy traveler the versatility to meet his or her connection needs. The three installation modes are: Installation Modes Router Mode - create a wireless network in a hotel, home, or office
  • Belkin F5D7233 | User Manual - Page 15
    Install Run the Easy Install Wizard first! DO NOT CONNECT THE ROUTER AT THIS TIME. 3 Important for Hotel Users: 4 Do Install Wizard will ask you to select which mode you want 10 the Router to use. Select "Router Mode", and click "Next". 11 1.3 The next screen will show you how to select
  • Belkin F5D7233 | User Manual - Page 16
    adapter. The network name (SSID) of the Router is "Belkin Traveler". Once you have connected wirelessly, click "Next". 2.3 Select one of the following: Hotel Connection - Select "Hotel Connection" if you are in a hotel. CLICK "NEXT" AND FOLLOW THE INSTRUCTIONS IN STEP 3. Cable/DSL Connection - If
  • Belkin F5D7233 | User Manual - Page 17
    connection and click "Continue". Note: If you do not see the page pictured here, open a web browser. Once you have established a connection with the Router, type "192.168.2.1" into the navigation bar of your web browser. 4.2 Your installation is now complete. However, if you would like to set up
  • Belkin F5D7233 | User Manual - Page 18
    the back panel to align with the word "Adapter". Click "Next". 2. Connect Connecting the Cables 2.1 Connect one end of the included Ethernet cable to the Router (which is now functioning in Adapter Mode) and the other end into your PC's RJ45 port. Next, plug the included USB power cable into the
  • Belkin F5D7233 | User Manual - Page 19
    Router are on. Click 2 "Next" to go to the Router's home page on the Web. 3 4 5 3. Configure Configuration for Adapter Mode 6 3.1 Wirelessly 10 established a connection with the Router, please refer to the "Using 11 the Adapter Mode" section in this manual on page 67. 3.2 Your
  • Belkin F5D7233 | User Manual - Page 20
    Connecting and Configuring your Router Access Point Mode Installation 1. Mode Selecting the Access Point Next". 2. Connect Connecting the Cables 2.1 Connect one end of the included Ethernet cable to the Router (which is now functioning in Access Point Mode) and the other end to a cable/DSL modem.
  • Belkin F5D7233 | User Manual - Page 21
    section Connecting and Configuring your Router 1 2.2 From your PC, wirelessly connect to the Router using your PC's built-in wireless card or external 2 wireless adapter. The network name (SSID) of the Router is "Belkin Traveler". Once you have 3 wirelessly connected, click "Next". 4 5 3.
  • Belkin F5D7233 | User Manual - Page 22
    the "Enter" key. PLEASE NOTE: If you have difficulty accessing the Router's Web-Based Advanced User Interface, go to the section of this User Manual entitled "Manually Configuring Network Settings". Logging into the Router You will see the Router's home page in your browser window. The home page is
  • Belkin F5D7233 | User Manual - Page 23
    Submit" to log in. 2 3 4 5 6 Logging out of the Router 7 One computer at a time can log into the Router to make changes to Router settings. Once a user has logged in to make changes, there 8 are . For more information, see the section in this manual entitled "Login Time-Out". 10 11 21
  • Belkin F5D7233 | User Manual - Page 24
    All advanced setup pages can be reached from this page. (10) (2) (5) (4) (3) (1) (8) (9) (6) (7) 1. Quick-Navigation Links You can go directly to any of the Router's UI pages by clicking directly on these links. The links are divided into logical categories and grouped by tabs to make finding
  • Belkin F5D7233 | User Manual - Page 25
    of the screen. 9 7. Features Shows the status of the Router's NAT, firewall, and wireless features. Changes can be made to the settings by clicking on and serial number of the Router. 10. Page Name The page you are on can be identified by this name. This User Manual will sometimes refer to
  • Belkin F5D7233 | User Manual - Page 26
    Advanced User Interface Setting your Connection Type Setting your Internet Service Provider (ISP) Connection Type to Dynamic IP A dynamic connection your ISP requires a specific MAC address to connect to the service, you can enter a specific MAC address or clone the current computer's MAC address through this
  • Belkin F5D7233 | User Manual - Page 27
    Interface 1 2 3 (2) 4 (3) 5 6 Setting your Internet Service Provider (ISP) Connection Type to Static IP A static IP information, then click "Apply Changes" (4). After you apply the changes, if your Router is set up properly, the "Internet Status" indicator will read "Connected". 9 (1)
  • Belkin F5D7233 | User Manual - Page 28
    PPPoE as the connection type. If you use a DSL modem to connect to the Internet, your ISP may use PPPoE to log you into the service. If you have an Internet connection in your home or small office that doesn't require a modem, you may also use PPPoE. (1) (2) (3) (4) (5) Your connection type is
  • Belkin F5D7233 | User Manual - Page 29
    it. 3. Service Name 4 A service name is rarely required by an ISP. If you are not sure if your ISP requires a service name, leave this problems with Internet applications working properly. 5. Maximum Idle Time The "Maximum Idle Time" feature is used to automatically 8 disconnect the Router
  • Belkin F5D7233 | User Manual - Page 30
    Web-Based Advanced User Interface Setting your Internet Service Provider (ISP) Connection Type to Point-to-Point When you have finished, click "Apply Changes" (8). After you apply the changes, if your Router is set up properly, the "Internet Status" indicator will read "Connected". (1) (2) (3)
  • Belkin F5D7233 | User Manual - Page 31
    enter "5" into the minute field, the Router will 5 disconnect from the Internet after five minutes of no Internet activity. This option should be used if you pay for your Internet service by the minute. This feature also allows you to select 6 "manual connect", "auto connect", and "keep session
  • Belkin F5D7233 | User Manual - Page 32
    of your computer's adapter and only let that particular computer connect to the Internet service. When you install the Router, its own MAC address will be "seen" by the ISP and may cause the connection not to work. Belkin has provided the ability to clone (copy) the MAC address of the computer into
  • Belkin F5D7233 | User Manual - Page 33
    connected to the modem. Cloning the address will not cause any problems with your network. 3 Cloning your MAC Address 4 To clone now cloned to the Router. Entering a Specific MAC Address 6 In certain circumstances you may need a specific WAN MAC address. You can manually enter one in the
  • Belkin F5D7233 | User Manual - Page 34
    Using the Web-Based Advanced User Interface Viewing LAN Settings Clicking on the header of the "LAN Setup" tab (1) will take you to its header page. A quick description of the functions can be found here. To view the settings or make changes to any of the LAN settings, click on "LAN Settings" (2) or
  • Belkin F5D7233 | User Manual - Page 35
    where x is anything between 0 and 255). 2. Subnet Mask There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. It is possible to change the subnet mask if necessary; however, do NOT make changes to the subnet mask unless you have a specific reason to
  • Belkin F5D7233 | User Manual - Page 36
    necessary; however, in order to do so you must manually set a static IP address for each computer on your any of the other advanced features of the Router such as DMZ or client IP filters, these change. 6. Local Domain Name The default setting is "Belkin". You can set a local domain name (network name
  • Belkin F5D7233 | User Manual - Page 37
    section Using the Web-Based Advanced User Interface 1 Viewing the DHCP Client List Page You can view a list of the computers (known as clients), which are connected to your network. You are able to view the IP address (1) of 2 the computer, the host name (2) (if the computer has been assigned
  • Belkin F5D7233 | User Manual - Page 38
    to be used as an access point. (1) (2) Changing the Wireless Network Name (SSID) To identify your wireless network, a name called the SSID (Service Set Identifier) is used. The default SSID of the Router is "Belkin Traveler". You can change this to a name of your choice or leave it unchanged. If
  • Belkin F5D7233 | User Manual - Page 39
    Here are a few different ways you can maximize the security of your wireless network and protect your data from prying eyes and ears. 2 This section home office, and small office user. At the time of this User Manual's publication, there are three encryption methods available. 3 4 Name 64-
  • Belkin F5D7233 | User Manual - Page 40
    -bit WEP encryption, but you might have older equipment that only supports 64-bit WEP. All Belkin wireless products will support both 64-bit and 128-bit WEP. Encryption Keys After selecting use the hex WEP key from your Router or access point and enter it manually into the hex WEP key table in your
  • Belkin F5D7233 | User Manual - Page 41
    client uses the same network key to access the network. Typically, this is the mode that will be used in a home environment. 6 For a list of Belkin wireless products that support WPA, please visit our website at www.belkin.com/networking. 7 8 9 10 11 39
  • Belkin F5D7233 | User Manual - Page 42
    Using the Web-Based Advanced User Interface Sharing the Same Network Keys Most Wi-Fi products ship with security turned off. So once you have your network working, you need to activate WEP or WPA and make sure your wireless networking devices are sharing the same network key. 40
  • Belkin F5D7233 | User Manual - Page 43
    up your key by writing in two characters between A-F and 0-9 in each box. You will use this key to program 5 the encryption settings on your Router and your wireless computers. 6 7 8 9 10 11 41
  • Belkin F5D7233 | User Manual - Page 44
    WEP encryption mode, you can enter your key by typing in the hex key manually, or you can type a passphrase in the "Passphrase" field and click " Wireless G Travel Router or access point from a computer with a wireless client, you will need to ensure that security is turned ON for this wireless
  • Belkin F5D7233 | User Manual - Page 45
    encryption mode, you can enter your key by typing in the hex key manually, or you can type a 2 passphrase in the "Passphrase" field and click Wireless G Travel Router or 6 access point from a computer with a wireless client, you will need to ensure that security is turned ON for this wireless
  • Belkin F5D7233 | User Manual - Page 46
    of this User Manual's publication, a security patch download is available, for free, from Microsoft. This patch works only with the Windows XP operating system. You also need to download the latest driver for your Belkin Wireless G Desktop or Notebook Network Card from the Belkin support site. Other
  • Belkin F5D7233 | User Manual - Page 47
    section Using the Web-Based Advanced User Interface 1 WPA/WPA2 Setup 1. Select "WPA/WPA2" or "WPA2 only" from the "Allowed Client Type". 2 2. Select "Pre-shared key" as the authentication type. 3. Enter your pre-shared key. This can be from eight to 63 3 characters and can be letters,
  • Belkin F5D7233 | User Manual - Page 48
    on how to configure your Belkin Wireless G Cards to use security features. At this point, you should already have your Router or access point set up to use WPA or WEP. To establish a wireless connection, you will need to set up your Wireless Notebook Card and Wireless Desktop Card to use the
  • Belkin F5D7233 | User Manual - Page 49
    the "Wireless Network" screen. The "Advanced" button will allow you to view and configure more Router options. 3 2. Under the "Wireless Network your WEP key in the network key box (designated as "Key" in Belkin's wireless configuration utility). 7 8 9 10 11 Important: A WEP key is
  • Belkin F5D7233 | User Manual - Page 50
    box, designated as "Key" on Belkin's wireless configuration utility. Important: WPA-PSK is a combination of numbers and letters from A-Z and 0-9. For WPA-PSK, your key can contain from eight to 63 keys. This network key needs to match the key you assign to your Router or access point. 5. Click "OK
  • Belkin F5D7233 | User Manual - Page 51
    Notebook Cards that are NOT Manufactured by Belkin If you do NOT have a Belkin WPA Wireless Desktop or Wireless 8 Notebook Card and your computer is not equipped with WPA-enabled software, download Microsoft's "Windows XP Support Patch for 9 Wireless Protected Access", which is available for
  • Belkin F5D7233 | User Manual - Page 52
    Using the Web-Based Advanced User Interface 3. Clicking on the "Wireless Networks" tab will display the following screen. Ensure the "Use Windows to configure my wireless network settings" box is checked. 4. Under the "Wireless Networks" tab, click the "Configure" button and you will see the
  • Belkin F5D7233 | User Manual - Page 53
    are using this computer to connect to 2 a corporate network that supports an authentication server such as a radius server. Please consult your " under "Data Encryption". This setting will 4 have to be identical to the Router that you set up. 7. Type in your encryption key in the "Network key
  • Belkin F5D7233 | User Manual - Page 54
    Using the Web-Based Advanced User Interface Utilities Tab This screen lets you manage different parameters of the Router and perform certain administrative functions. 52
  • Belkin F5D7233 | User Manual - Page 55
    during the restart. 4. A 25-second countdown will appear on the screen. When the countdown reaches zero, the Router will be restarted. The Router's home page should appear automatically. If not, type in the Router's address (default = 192.168.2.1) into the navigation bar of your browser. 53
  • Belkin F5D7233 | User Manual - Page 56
    Using the Web-Based Advanced User Interface Restoring Factory Default Settings Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you restore all of the defaults. 1. Click the "Restore Defaults"
  • Belkin F5D7233 | User Manual - Page 57
    section Using the Web-Based Advanced User Interface 1 Saving a Current Configuration You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are 2 lost or changed. It is recommended that you back up your
  • Belkin F5D7233 | User Manual - Page 58
    Using the Web-Based Advanced User Interface 3. When the save is complete, you will see the following window. Click "Close". The configuration is now saved. Restoring a Previous Configuration This option will allow you to restore a previously saved configuration. 1. Click "Browse". A window will open
  • Belkin F5D7233 | User Manual - Page 59
    A 35-second countdown will appear on the screen. When the countdown reaches zero, the Router's configuration will be 9 restored. The Router's home page should appear automatically. If not, type in the Router's address (default = 192.168.2.1) into the navigation bar of your browser. 10 11 57
  • Belkin F5D7233 | User Manual - Page 60
    improvements and fixes to problems that may exist. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Router's firmware to the latest version. Searching for a New Version of Firmware From http://www.belkin.com/support/downloads.asp, type
  • Belkin F5D7233 | User Manual - Page 61
    section Using the Web-Based Advanced User Interface 1 Downloading a New Version of Firmware You will now be taken to the download page of "F5D7233 Firmware update - North America". 2 3 4 5 6 7 8 1. To download the new version of firmware, click the download logo ( ). 9 2. A window will
  • Belkin F5D7233 | User Manual - Page 62
    window. Click "Close". The download of the firmware is complete. To update the firmware, follow the next steps in "Updating the Router's Firmware". Updating the Router's Firmware 1. In the "Firmware Update" page, click "Browse". A window will open that allows you to select the location of the
  • Belkin F5D7233 | User Manual - Page 63
    . Click "OK". 6 7 5. You will see one more 8 message. This message tells you that the Router 9 may not respond for as long as one minute as the firmware is loaded 10 into the Router and the Router is rebooted. Click "OK". 11 6. A 60-second countdown will appear on the screen. When the
  • Belkin F5D7233 | User Manual - Page 64
    to properly communicate with your Router, you will need to change your PC's TCP/IP settings to DHCP. Manually Configuring Network Adapters in Windows (1) (2) (3) 5. If "Use the following IP address" (2) is selected, your Router will need to be set up for a static IP connection type. Write the address
  • Belkin F5D7233 | User Manual - Page 65
    Manually Configuring Network Settings 1 Manually Configuring Network Adapters in Windows 98SE or Me 1. the address 9 information in the table below. You will need to enter this information into the Router. 10 11 section 4. Write in the IP address and subnet mask from the "IP Address"
  • Belkin F5D7233 | User Manual - Page 66
    Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browser's settings. If you are having trouble accessing the Internet or the Web-Based Advanced User Interface, then change your browser's settings to the recommended settings in this section. Internet
  • Belkin F5D7233 | User Manual - Page 67
    Recommended Web Browser Settings 1 4. Make sure there are no check marks next to any of the displayed options: "Automatically detect settings", "Use automatic configuration script", and "Use a proxy server". Click "OK". Then 2 click "OK" again in the "Internet Options" page. 3 4 5 6 7 8
  • Belkin F5D7233 | User Manual - Page 68
    advanced feature should be employed by advanced users only. The Router can be configured to work as a wireless-network access point. Using this mode will defeat the NAT IP sharing feature and DHCP server. In Access Point (AP) mode, the Router will need to be configured with an IP address that is
  • Belkin F5D7233 | User Manual - Page 69
    Use the Web-Based Advanced User Interface The default IP address of the Router (while functioning in Adapter 2 Mode) is 192.168.2.225. You Connections" icon. 3. Right-click on the "Local Area Connection" button for your Router 6 and select "Properties". 7 8 9 10 11 section 4. In the
  • Belkin F5D7233 | User Manual - Page 70
    subnet mask: 255.255.255.0. Click "OK". Warning: Once you have configured your Router, you must repeat steps 1 through 3 and select "Obtain an IP automatically" or any user who wants to see it. To make any changes to the Router's settings, you have to log in. Clicking the "Login" button or
  • Belkin F5D7233 | User Manual - Page 71
    99 minutes. Login Time-Out The login time-out option allows you to set the period of time that you can be logged into the Router's Web-Based Advanced User Interface. The timer starts when activity stops. For example, you have made some changes in the Web-Based Advanced User Interface
  • Belkin F5D7233 | User Manual - Page 72
    the settings of the Local Area Network (LAN) side of the Router. Changes can be made to the settings by clicking the quick-navigation links on the left side of the screen. 4. Wireless Connection Shows the status of the Router's wireless setting. Changes can be made to the settings by clicking the
  • Belkin F5D7233 | User Manual - Page 73
    Scan Clicking the "Scan" button will give you the most up-to-date data 10 list of available networks. 2. SSID The SSID is the wireless network name. 11 3. BSSID/MAC Address This gives the MAC address of the available network. 4. Encryption Identifies the type of network security implemented
  • Belkin F5D7233 | User Manual - Page 74
    saved configuration. Firmware Update From time to time, Belkin may release new versions of the Router's firmware. Updates contain improvements and fixes to known problems. For the latest firmware, go to the support section of www.belkin.com/networking. a. Browse: Clicking on "Browse" will open
  • Belkin F5D7233 | User Manual - Page 75
    Troubleshooting 1 Problem: Installation CD does not automatically start. 2 Solution: If the CD-ROM does not start the Easy Install Wizard automatically, 3 it could be that the computer
  • Belkin F5D7233 | User Manual - Page 76
    Troubleshooting Problem: The Easy Install Wizard cannot find my Router. Solution: If the Easy Install Wizard is not able to find the Router during the installation process, please check the following items: 1. Check to see if the switch on the back of the Router has been set to "Router Mode." 2.
  • Belkin F5D7233 | User Manual - Page 77
    service name. Make 7 sure the Router connection Belkin Technical Support. Problem: 11 I can't connect to the Internet wirelessly. Solution: If you are unable to connect to the Internet from a wireless computer, please do the following: 1. Look at the lights on your Router. Your Belkin Router
  • Belkin F5D7233 | User Manual - Page 78
    Troubleshooting 2. Open your wireless utility software by clicking on the icon in the system tray at the bottom, right-hand corner of the screen. If you are also using a Belkin Wireless Card or Adapter with this Router, the tray icon should look like this (the icon may be red or green): 3. The exact
  • Belkin F5D7233 | User Manual - Page 79
    enabled. This setting is found on the Router's wireless 8 "Channel and SSID" configuration page. If you are still unable to access the Internet after completing these 9 steps, please contact Belkin Technical Support. Problem: 10 My wireless network performance is inconsistent. Data transfer
  • Belkin F5D7233 | User Manual - Page 80
    Troubleshooting In order to determine if wireless issues are related to range, we suggest temporarily moving the computer, if possible, five to 10 feet away from the Router. Changing the Wireless Channel-Depending on local wireless traffic and interference, switching the wireless channel of your
  • Belkin F5D7233 | User Manual - Page 81
    Troubleshooting 1 Technical Support You can find technical support information at: 2 http://www.belkin.com/networking or www.belkin.com through the tech support area. If you want to contact technical support by phone, please call: 3 US: 877-736-5771 or 310-898-1100 ext. 2263 4 Europe:
  • Belkin F5D7233 | User Manual - Page 82
    Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D7233 to which this declaration relates, complies with
  • Belkin F5D7233 | User Manual - Page 83
    notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user's authority to operate the equipment. 5 Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 139 & RSS 210 Industry 6 Canada. This Class
  • Belkin F5D7233 | User Manual - Page 84
    if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER
  • Belkin F5D7233 | User Manual - Page 85
    Wireless G Travel Router Belkin Tech Support US: 877-736-5771 310-898-1100 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 800 616 1790 Belkin Corporation 501 West Walnut Street Compton, CA 90220-5221, USA 310-898-1100 310-898-1111 fax Belkin Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
User Manual
F5D723
3
Share your hotel broadband
Internet connection
Wireless G
Travel Router
�±²³´
µ¶³·²¸¹´
º»¼½¾¾¿